Battlefield 4 to run at 720p and 60fps. Cool wit me


Recommended Posts

They shouldn't even be wasting their money developing this so called "next gen" version if they're gonna leave it running at 720p on both versions. What a waste.

 

 

I'm anxious to hear if the Xbox One version will be aiming higher.

 

Why would you think for a moment that they would aim higher on a weaker gpu?

  • Like 1

Are you people saying you really can't see the difference between 30fps and 60fps, not seeing the difference in the following tests:

Some people are distanced from reality when they hear things from sources they trust, I think.  Like my friend who's convinced everyone in the world still uses XP.  :rolleyes:

 

That said, this whole topic is based on something they already denied, as noted on the top of page 3.

 

Though I did find it ironic how many PS4 games shown off were struggling to keep up the framerate when X1 devs seemed to have no problem there.  I'm not saying that's how it'll be at launch, but it was interesting.

Umm... I clearly explained I wasn't talking about hardware or cost in the first place.  Your first response was completely out of context since it had nothing to do with what I said...  I was talking about optimization on the developer consoles being subpar causing developers to not be able to utilize the full potential as of now.  If you read my response, you'd understand that.

i know you didnt initially talk about cost,but you stated that you think ms/sony rushed this thing,and thats why we wont be able to have the greatest performance. i replied back that its not that they rushed it,these boxes have been in development for years. this particular architecture was chosen because of cost,but the consequences of using this architecture is more complex programming. the only part where i didnt agree with your original statement was the "rushing" part. maybe there was a little misunderstanding in between.

Though I did find it ironic how many PS4 games shown off were struggling to keep up the framerate when X1 devs seemed to have no problem there.  I'm not saying that's how it'll be at launch, but it was interesting.

 

m $ has a big advantage in software

Though I did find it ironic how many PS4 games shown off were struggling to keep up the framerate when X1 devs seemed to have no problem there.  I'm not saying that's how it'll be at launch, but it was interesting.

X1 demos were running on high powered PCs.

i know you didnt initially talk about cost,but you stated that you think ms/sony rushed this thing,and thats why we wont be able to have the greatest performance. i replied back that its not that they rushed it,these boxes have been in development for years. this particular architecture was chosen because of cost,but the consequences of using this architecture is more complex programming. the only part where i didnt agree with your original statement was the "rushing" part. maybe there was a little misunderstanding in between.

Ah ok, I see what you're saying.  Cost is definitely part of it. There's also heat, which is a major concern.  They could go for crazy performance, but creating a lot of heat and having a loud fan to prevent a "RROD" isn't ideal.  Hopefully MS learned their lesson on that, but I'm also a little concerned with Sony since their PSU is integrated.  Lots of trade-offs and what-ifs.

 

Microsoft has done a lot of flip-flopping and minor tweaking of hardware, so that's probably where I'm getting the impression that it's being rushed.  And at E3 when the PS4 couldn't do 60fps, and both consoles had crashing issues, it also gave a bad impression.  Things like that should have been worked out months and months ago.

This is shocking news, for next-gen, I wouldn't call that acceptable.

You've guys have got to consider that Frostbite is an engine specifically designed around Direct X. With the PS4 having no equivalent, it doesn't surprise me that there may be a high learning curve to it.

In the EA conference, when they did that online demo, they specifically mentioned 1080p 60fps and that was on the X1. With the article around how they built Direct X for the X1 it wouldn't surprise me if this was still true.

Here's the accusation, 

 

http://www.cinemablend.com/games/Xbox-One-Games-E3-Were-Running-Windows-7-With-Nvidia-GTX-Cards-56737.html

 

 

Here's the response:

http://www.cinemablend.com/games/Microsoft-Says-Windows-7-Nvidia-GTX-PCs-E3-Were-Xbox-One-Dev-Kits-56834.html

 

There's also this 'games reporter' noting that some demo kiosks crashed to a standard-issue Windows desktop (like what you'd have on a PC) rather than what you'd get for a console running Windows 8. https://twitter.com/JazRignall/statuses/344967744808185857

 

One developer responded saying "We just didn't have time to make Xbox1-native versions so we just ran the PC version because we wanted to showcase our game."

 

-- so, what's the summary? --

We know for sure the demos weren't running all running on XBox One hardware. Some of it was explained to be running on 'pc hardware similar to an xbox one -- development kits' and that despite their considerably more powerful hardware, the machines should have performance similar to the shipping consumer version of the XBox One. Other demos just were the desktop PC version running on pretty good quality hardware because that's all the developer had to showcase.

 

Make of that what you will.

All first party XB1games ran on devkits except Lococycle. I am not going to bother with those links. This was a non issue at E3 that was blown out of proportion.

All first party XB1games ran on devkits except Lococycle. I am not going to bother with those links. This was a non issue at E3 that was blown out of proportion.

Nothing was blown out of proportion.

 

It's just that some people were religiously hurt when the news came out. Whether first party, second party or third party doesn't matter.

 

I just hope both consoles run games at slightly higher resolution than 720p at least.

Here's the accusation, 

 

http://www.cinemablend.com/games/Xbox-One-Games-E3-Were-Running-Windows-7-With-Nvidia-GTX-Cards-56737.html

 

 

Here's the response:

http://www.cinemablend.com/games/Microsoft-Says-Windows-7-Nvidia-GTX-PCs-E3-Were-Xbox-One-Dev-Kits-56834.html

 

There's also this 'games reporter' noting that some demo kiosks crashed to a standard-issue Windows desktop (like what you'd have on a PC) rather than what you'd get for a console running Windows 8. https://twitter.com/JazRignall/statuses/344967744808185857

 

One developer responded saying "We just didn't have time to make Xbox1-native versions so we just ran the PC version because we wanted to showcase our game."

 

-- so, what's the summary? --

We know for sure the demos weren't running all running on XBox One hardware. Some of it was explained to be running on 'pc hardware similar to an xbox one -- development kits' and that despite their considerably more powerful hardware, the machines should have performance similar to the shipping consumer version of the XBox One. Other demos just were the desktop PC version running on pretty good quality hardware because that's all the developer had to showcase.

 

Make of that what you will.

Why did you single out Xbox One, when "PS4" had the same issues?

ihhSp0Cl.jpg

http://www.gameswelt.tv/need-for-speed-rivals/chris-zockt-gamescom-2013,35769

I don't get you guys. These are shuttle PCs with a hopped up 7790, multi core CPUs, decent clocks, min available 5GB, and less overhead than a Windows/Mac OS PC. Who in their right mind would doubt they can do 1080p native? Only really cautious or lazy developers, that's who.

Getting back to the fps argument; I can tell the difference between 30 and 60. But only when I stop and specifically look for the differences. During the middle of gameplay, especially in a game like Battlefield, it's much less noticeable because there is so much more going on that you need to pay attention to. So in the context of the OP that's why I said if I had to choose, I would pick 1080p30 over 720p60.

Nonsense. Both consoles can easily run that game 1080p ultra at 40 plus frames. Shoddy coding or up scaled prev Gen versions if not the case.

 

Your dreaming. A ps4/nextbox gpu only averages BF3 40fps on ultra at 1080p. Obivously the console hardware has advantages with memory access and no os etc. but considering BF4 is going to be more intensive than BF3 I think it's safe to say that a PS4 / Nextbox could not run BF4 ultra 1080p at anything more than 20-30fps.

 

720p 60fps is pretty sweet for a game like this on a console I guess, I couldn't go from a PC to that though....

Getting back to the fps argument; I can tell the difference between 30 and 60. But only when I stop and specifically look for the differences. During the middle of gameplay, especially in a game like Battlefield, it's much less noticeable because there is so much more going on that you need to pay attention to. So in the context of the OP that's why I said if I had to choose, I would pick 1080p30 over 720p60.

 

You can't be very good at bf3 or play very much then, as most people would definitely take 60fps. You are literally not as good in the game at 30fps. Close quarters combat and responding quickly to things especially is harder. 

Single player game it wouldn't matter as much.

the only game that wow me was watch dog. that game truly is 1080p base on my scrutiny.  In fact, next gen game should be native 1080p not a scale up version :s  if not then what is the point of buying when current gen some game scale up as well especially pc isn't optimize for true 1080p

Looks likes this was a non-issue? DICE has come out and said that final resolution is when game ships.

 

Javascript is not enabled or refresh the page to view.

Click here to view the Tweet

 

Nothing was blown out of proportion.

 

It's just that some people were religiously hurt when the news came out. Whether first party, second party or third party doesn't matter.

 

I just hope both consoles run games at slightly higher resolution than 720p at least.

 

When we continue to see statements like "X1 demos were running on high powered PCs.", that's twisting facts for whatever reason. The news was specifically about Microsoft booth which showed first party games.

All third parties used PCs for PS4 and XB1 - that is always the case for new consoles, nothing new there. See the PS4 photo above.

Your dreaming. A ps4/nextbox gpu only averages BF3 40fps on ultra at 1080p. Obivously the console hardware has advantages with memory access and no os etc. but considering BF4 is going to be more intensive than BF3 I think it's safe to say that a PS4 / Nextbox could not run BF4 ultra 1080p at anything more than 20-30fps.

 

720p 60fps is pretty sweet for a game like this on a console I guess, I couldn't go from a PC to that though....

 

Especially as the consoles will be at last getting 64 Multiplayer. combine that with 720p@60fps that is a decent feat for this round of consoles.

 

As a comparison my 660ti with 3Gb and clocked i7 2660k (8Gb DDr2133 sys ram) struggles to push BF3 at ultra, sub 1080p (1680x1050 for 60fps at ultra, drops to 50fps@1080p) on 64 player maps. Not exactly a top end games PC by any means.

One thing I did see very obvious in the previous title, seeing bf3 on a 360 on a large screen compared to a PC on the same side by side was shocking, a PC on low was comparable to the texture detail on the 360. Id think the one and ps4 will manage to push ultra comparing it with mid-top level pc levels, granted sub 1080 upscaled, with higher texture levels giving a richer env.

 

Without an upgrade, ill be happy if my bf3 rig plays bf4 at high, never mind ultra!

 

With both consoles, there hasnt been anything announced yet that has made me go wow , more a next half gen, deffo an improvement, just not as big as i thought.

 

Tbvh in any fps anything around 40+ is plenty for a smooth experience on any platform. 

 

If I was to buy one, it would be an xbox one, still got my black brick xbox and my 360 Elite, sadly havnt gamed on the 360 for years, its a netflix/lovefilm box these days.

That's quite bad tbh... All that "next gen" power and they can't do a measly 1080@60fps? :p

 

on a pc, you need a 1.2-1.8gflops gpu to play BF3 at 1080p60fps on ultra like a 650ti or 7850. these are the similar specs for xbox one and ps4.  because of the custom silicon,and the lower level software access, i fully expect the hardware to be capable of running next gen titles at 1080p60fps like BF4, but again, we have to wait and see how balanced the whole system is. developers might not waste their time optimizing if its a painful experience and the sdk sucks. this doesnt mean the hardware isnt capable.

  • Like 1

im gonna buy  GTA V and play the hell out of it and not worry about the next gen consoles till later. 

 

Exactly my plan.

Grab GTAV on launch day and rinse that for all it's worth. Once that's got boring, which looks like a long time yet, then i'll see what people who have actually used the new consoles say and i'll make my decision and grab one plus BF4.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!