XP Windows / Automatic Updates SVCHOST.exe 100% CPU .. MS did something.


Recommended Posts

I've done thousands of XP installs with my media, always an easy updates scenario untill a few months ago.

Best slipstream some updates again.

Microsoft: You really are beginning to deserve to fail.

I only hope I dont have to do a Server or SBS 2003 from scratch ever again, my bet is it will be the same fault.

 

 Quick reply to the 8.1 comment. Normal people, old people, infirm people et all have all been tought to, "Drive" Windows in a certain (desktop) way.

 If you move the controls in their cars they would stop buying the car until someone put them back where they belong.

 (off subject, sorry)

Hey guys

been following this thread..have any of you who have been experienced this problem tried this out..Microsoft apparently released a patch several years ago for this very issue

http://www.windows-help-central.com/svchost-exe-100-percent.html

Sorry, but that's just a "stick my head in the sand and pretend it doesn't exists" approach to safety.

 

What happens when the next Blaster or Nachi comes along that makes use of a vulnerability in Windows to infect your machine without user intervention.  The Windows firewall is not infallible you know, especially the antiquated one in XP. I've seen malware able to disable it in the past. It can take AV vendors several days, if not weeks to push out definition updates for new viruses as quite often it depends on sample submissions.

After all those years it's extremely unlikely to see another remote vulnerability, even more one that bypasses the firewall, and almost impossible one that also bypasses the router that most people use. I've seen machines never updated after SP2, and that's almost from 9 years ago, having no issues at all. If you're fearful of the worst case scenario after SP2 you can close all the ports, inclusing those reserved by all the microsoft network client and file and printer sharing without even having to bother with editing registry entries (both Server and Workstation services are uninstallable). That said, choosing between a completely unusable machine and a machine perfectly usable but slightly less insecure the answer is pretty easy, if security was really that important you shouldn't even use a computer to start with. I'd be far more afraid to browse the web with an outdated java, flash or adobe reader plugin.

After all those years it's extremely unlikely to see another remote vulnerability, even more one that bypasses the firewall, and almost impossible one that also bypasses the router that most people use. I've seen machines never updated after SP2, and that's almost from 9 years ago, having no issues at all. If you're fearful of the worst case scenario after SP2 you can close all the ports, inclusing those reserved by all the microsoft network client and file and printer sharing without even having to bother with editing registry entries (both Server and Workstation services are uninstallable). That said, choosing between a completely unusable machine and a machine perfectly usable but slightly less insecure the answer is pretty easy, if security was really that important you shouldn't even use a computer to start with. I'd be far more afraid to browse the web with an outdated java, flash or adobe reader plugin.

 

dude, after April 8 in 2014 every exploit discovered that affects Windows XP won't be patched because there won't be a patch to begin with, so a experienced hacker can read the MS Bulletin, download the patch for other OS and by understanding what that patch does it can exploit the fault in Windows XP, by making malware that targets that fault, knowing that it won't be fixed. And considering the amount of users and organizations that use Windows XP, this is bad.

 

I remember the days of massing attacks by using worms and exploits that targeted Windows 2000; while most of the people migrated from 2000 to XP along th years and those attacks vectors were reduced, it took a while and in that same time, many attacks were sucessful.

this use to be a bug in windows XP that MS fixed years ago when you were in pre SP2 or SP3 I can't remember it's been a while... but windows update would go nuts with the whole update service and run at 100% for a long time

dude, after April 8 in 2014 every exploit discovered that affects Windows XP won't be patched because there won't be a patch to begin with, so a experienced hacker can read the MS Bulletin, download the patch for other OS and by understanding what that patch does it can exploit the fault in Windows XP, by making malware that targets that fault, knowing that it won't be fixed. And considering the amount of users and organizations that use Windows XP, this is bad.

 

I remember the days of massing attacks by using worms and exploits that targeted Windows 2000; while most of the people migrated from 2000 to XP along th years and those attacks vectors were reduced, it took a while and in that same time, many attacks were sucessful.

You should read the whole chain of posts before answering. I already wrote that within 1 year XP won't be supported anymore. My point was that if you use a third party browser and keep adobe flash and reader updated the attack surface would still stay very low. Do you think that antivirus makers don't bother detecting the exploit codes as well?

Hey guys

been following this thread..have any of you who have been experienced this problem tried this out..Microsoft apparently released a patch several years ago for this very issue

http://www.windows-help-central.com/svchost-exe-100-percent.html

Yes, this is not a new issue as many would think. I have noticed this on many machines when working with one of the MS partners, who were testing WGA. 

You can try using the offline updater, http://download.wsusoffline.net/

It updates the Windows Update files by default before installing any more updates. Make sure to update root certificates as well.

Hey guys

been following this thread..have any of you who have been experienced this problem tried this out..Microsoft apparently released a patch several years ago for this very issue

http://www.windows-help-central.com/svchost-exe-100-percent.html

 
Supported Operating System
Windows XP Service Pack 2

Isn't that already integrated in SP3?

Iv'e had this issue on an old PC at church that was never online. Installed internet access the PC updated to SP3 and all the updates.

But still every day it would do this 100% thing, until I turned off auto updates.

Tried every thing  I could find to fix it finally gave up, as soon as we can get some donations for a new system bye bye XP.

Back from todays rounds, one of which was a lady in her 80's with a P4 Dell. "Running really slow" This is an eight year old install, guess what, 100% cpu cause by WU?

This, I'm sure now is not an old issue, or the same as an old issue, MS have done something. My previous post experiment with clean builds and now another in the field.

Proof enough for me.

Perhaps done on purpose to have people move up to newer OS? I dont believe much in conspiracy but I would not put it past them.

Perhaps done on purpose to have people move up to newer OS? I dont believe much in conspiracy but I would not put it past them.

 

"Never ascribe to malice that which is adequately explained by incompetence."

  • Like 2

This happens iwith XP mode too. I was trying to install / update it, to make an up to date XP ISO.

 

I noticed svchost.exe was 100% constantly. I couldnt update it, without it freezing. The only thing that was installed was XP mode / with XP3.

 

Tried WSUS offline. it was fine but didnt update everything. Well, I couldnt figure out how to make it update everything. Even tho, I downloaded all the updates with it. And created an ISO with it

 

Altho, I dont know what happened after I installed XP mode. Not only would it not update, but later I found out that the BITS and Auto update services were borked (one / or both were corrupt somehow, or some files didnt register properly / files were missing). In the end, I gave up trying. It just took too long for it to do anything

Hi to all  :)

 

I found a solution !!!

 

1. Install fresh copy of Windows xp sp3

2. Install Internet Explorer 8  (without updates !!!)

3. Install this update kb2870699

 

 

 

And you are done :) No more 100% usage of svchost.exe


 
  • Like 2

Okay so i'm just testing this now.

Made a new VM in ESXi, Installed a fresh copy of XP SP3 with no changes, updates, settings or anything.

 

Changed WU to "notify only", and waited with Task Manager open.

After about 3 minutes of brief spurts ranging from 0 to 25% activity on svchost.exe I noticed that wmiadap.exe got called and after that, svchost.exe locked on 99% CPU use. (The wmiadap.exe process closed soon after - Post edit : Seems this wasn't related as it's not being called now)

 

Going to try perguife then Lasoto's suggestions shortly.

 

 

Update 1 : perguife's suggestion failed to work, CPU locked at 99%. Trying Lasoto's suggestion next.

 

Update 2 : And Lasoto's suggestion hasn't worked either. CPU just locked at 99% again.

 

Update 3 : I took fatbeerguy's suggestion of first using procexp to find what service was causing trouble - no surprises it was svchost.exe backing wuauclt.exe, so then I used procmon to monitor system activity. And... the process logs showed very little (if any) change whether svchost was maxed or idle!

 

Any more ideas?

Edited by Raa
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AMD RX 9070 GRE AI, Blender benchmarks vs 9070 XT, 7800XT, Nvidia RTX 5070, 4070 by Sayan Sen Earlier this week, we shared the first part of our review of AMD's new RX 9070 GRE. It was about the gaming performance of the GPU, and we gave it an 8 out of 10. As a follow-up, similar to how we did with the 9070 XT and non-XT, we are doing a dedicated productivity review for the RX 9070 GRE as well, where we compare it against the 9070 XT, 9070, 7800 XT, as well as Nvidia's 5070 and 4070. This will include AI, rendering, compute, and more benchmarks. AI performance, especially, is a very important metric in today's world, and AMD also promised big improvements thanks to its underlying architectural improvements. We will be pitching it against the data we already have for the RX 9070, and RX 9070 XT, but also the Nvidia 5070 FE, MSI GeForce RTX 4070 VENTUS 2X 12G, and Gigabyte Radeon RX 7800 XT GAMING OC 16G as they are in a similar price class, but also because we do not have a comparable 5060 Ti card lying around here that we can compare it against. Before we get underway, this is a collaboration between Sayan Sen and Steven Parker, who lent me his test bed. Also, there was no editorial input from AMD. First up, the specs of the RX 9070, 9070 XT, and 9070 GRE, which were given to us by AMD: Radeon RX 9070 GRE Radeon RX 9070 Radeon RX 9070 XT Boost Clock: Game Clock: up to 2.79GHz up to 2.20GHz up to 2.52GHz up to 2.07GHz up to 2.97GHz up to 2.40GHz Stream Processors 3,072 (48 CU) 3,584 (56 CU) 4,096 (64 CU) Ray Accelerator 48 56 64 AI Accelerator 96 112 128 ROPs 96 128 Texture Mapping Units 192 224 256 Memory 12 GB GDDR6, 18Gbps Clock, 192-bit Bus 432 GB/s 16 GB GDDR6, 20Gbps Clock, 256-bit Bus Effective Memory Bandwidth: 640 GB/s Infinity Cache 48 MB (3rd Gen) 64 MB (3rd Gen) Card Bus PCI-E 5.0 X16 Output 2x HDMI 2.1b 2x DisplayPort 2.1a Power consumption 220W 304W Recommended PSU 650W 750W Slot width 2x 3x Price (SEP) $549 $599 As you can see from the specs above, it is less than the standard RX 9070 in every way that counts, except for slightly higher Boost and Game clock speed. Design Moving on, the RX 9070 GRE we were given is an XFX Swift triple-fan, dual-slot design with two 8-pin connectors. At 30cm (self-measured), it will fit in most systems easily. There is no RGB either. The AMD Radeon RX 9070 GRE by XFX from all angles. Test system Our test system consists of the following: Lian Li O11 Dynamic Mini V2 Flow (Amazon|Newegg) ASUS Z890 ProArt Creator WiFi (Amazon|Newegg) Intel Core Ultra 7 270K Plus (Amazon|Newegg) Thermal Grizzly KryoSheet - 44x37 (Amazon|Newegg) 2x 16GB G.Skill Trident Z5 RGB (7200 MT/s in XMP) (Amazon|Newegg) Sabrent Rocket4 Plus 2TB SSD (Amazon) Windows 11 25H2 (Build 26200.8246) AMD shared a press driver based on the recently released Adrenaline 26.5.2 that we were required to use. We now move on to our benchmarks. First up, we have Geekbench AI running on ONNX. For some reason, the 9070 GRE does exceptionally well here in both half-precision (FP16) and single-precision (FP32). It manages to beat the RTX 5070 and RX 9070 non-XT, and is only behind the 9070 XT. Since Geekbench runs in short bursts instead of continuously hammering the graphics card, it seems the GRE's faster boost clocks are helping here. Next up, we move to the UL Procyon AI test suite, starting with the image generation benchmark. We chose the Stable Diffusion XL FP16 test since it is the most intense workload available on Procyon. The Nvidia cards do very well here, as even the 4070 out-muscles AMD's best fairy easily. The positive thing about the GRE is that it gets quite close to the 9070 non-XT in this test; this indicates that the VRAM does not play a very big role here, as SD XL relies on float16 (FP16). So this is something to keep in mind again. If you wish to work with float32 AI workloads, graphics cards with larger than 12 GB buffers would likely emerge as victors. Regardless, the gains are still massive on AMD's 9000 series compared to the 7000 series. Following image generation, we move to the text generation benchmark. This is one test where the 9070 GRE struggled, quite a lot. It seems that the 12 GB VRAM and lower memory bandwidth of the new Radeon 9070 GRE are hurting it quite a bit; the split is massive, especially in a test like Llama2, which packs 13 billion parameters. As such, in all the tests, the 9070 GRE is the slowest of the lot. Next, we tried Blender, and here the AMD GPUs were beaten by Nvidia. Rendering is something the Green team has always had a lead over the Red side, and it has not changed so far. On the positive side, though, the 9070 GRE shows significantly better results than the 7800 XT, which means AMD is on the right path. Catching up to Nvidia, though, will require a lot more effort. And we hope HIP and ROCm can keep improving. Wrapping up AI testing, we measured OpenCL throughput in the Geekbench compute benchmark. The RX 9070 GRE alongside the 9070 did not fare well here at all, even falling behind the 7800 XT. Interestingly, even the RTX 5070 could not beat the 4070 on OpenCL, so perhaps this suggests that OpenCL optimization may not have been a priority for either AMD or Nvidia in the modern era. Conclusion We reached the end of our productivity performance review of the 9070 GRE, and we have to say it's a mixed bag. Unlike the 9070 and 9070 XT, the GRE excels in some areas while losing ground fairly easily in others. Similar to how it happened in gaming, any time the card's memory subsystem gets hammered, it tends to fall behind the others. This was the case with text generation, wherein we saw the VRAM sometimes hit its maximum available 12 GB of usage with larger model sizes. So what do we make of the RX 9070 as a productivity hardware? It can certainly be used, but you have to know it has its limitations. For those looking for a GPU that can deal with more, AMD recently unveiled the Radeon AI PRO R9700, which is essentially a 32 GB refresh of the 9070 XT with some additional workstation-based optimizations. On a similar note, the new Ryzen AI Halo platform is something you can consider if you want to set up a local AI processing station. Considering everything, we rate AMD's Radeon RX 9070 GRE a 7.5 out of 10 for its productivity performance. Price is less of a factor for those looking at productivity cases compared to those considering the GPU for gaming, and as such, we felt it did quite decently on many occasions and can be handy if you need a 12 GB GPU and, for some reason, don't want to get Nvidia. Purchase links: RX 9070 / XT / GRE (Amazon US) As an Amazon Associate, we earn from qualifying purchases.
    • Does anyone here know if these updates are integrated into the UUP dump isos?
    • Motrix Next 3.9.4 by Razvan Serea Motrix Next is a modern, open-source cross-platform download manager built as the official next-generation successor to the original Motrix project. It has been completely rewritten using Tauri 2, Vue 3, TypeScript, and Rust, while still relying on the powerful Aria2 download engine for high-speed multi-protocol transfers. The app supports HTTP, HTTPS, FTP, BitTorrent, ED2K and magnet links, offering advanced features like multi-connection acceleration, task scheduling, bandwidth control, and batch download management. With a significantly reduced install size (around 20MB), it focuses on being lightweight, fast, and resource-efficient compared to traditional Electron-based download tools. Designed for Windows, macOS, and Linux, Motrix Next delivers a clean, modern UI inspired by Material Design 3 principles, with smooth animations and a minimal workflow. It improves usability through better download organization, system tray integration, and enhanced torrent handling including selective file downloads and tracker management. Motrix Next features: Multi-protocol downloads — HTTP, FTP, BitTorrent, Magnet, .torrent, ED2K, and Metalink tasks BitTorrent — Selective file download, DHT, peer exchange, encryption controls, metadata caching, GeoIP peer flags, and tracker probing Browser extension integration — Embedded Extension API with independent authentication, download confirmation, smart auto-submit, filename hints, referer/cookie forwarding, and real-time controls (Chrome Web Store · Edge Add-ons) Safe filename handling — Content-Disposition, RFC 2047, non-UTF-8, percent-encoded, and extensionless URL resolution with path traversal sanitization Download organization — Favorite and recent folders, optional file-type categorization, stale-record cleanup, and completed history backed by SQLite Concurrent downloads — Independent controls for active tasks, HTTP connections per server, segments per file, and BT peer limits Speed control — Global and per-task upload/download limits with day-of-week and time-of-day scheduling System integration — Tray operation, optional tray speed display, macOS Dock badge/progress, protocol handlers for magnet://, thunder://, and motrixnext:// Lightweight mode — Destroys the WebView on minimize-to-tray while Rust keeps the engine, task monitor, notifications, history, and extension routing alive Notifications and power options — Native task start/complete/failure notifications, keep-awake during downloads, and optional shutdown after completion Network controls — Scoped proxy support for downloads, app updates, and tracker updates, plus system proxy detection Auto-update channels — Stable, Beta, and Latest Across Channels policies with separate download and install phases Diagnostics — Structured logs, exportable diagnostic ZIPs, database integrity checks, automatic DB rebuild, and Linux GPU rendering fallback Personalization — Light/dark/system theme, 10 color schemes, 26 languages, and first-launch system language detection Motrix Next 3.9.4 changelog: Motrix Next 3.9.4 promotes the 3.9.4 beta cycle to stable. This release refreshes bundled engine binaries, improves task detail readability and copy actions, expands link handling for magnet and ED2K workflows, polishes responsive navigation and text wrapping, updates browser extension documentation, and refines network preference controls. New Features Task Detail copy actions — Added copyable values for task metadata and reusable render functions for long text fields. Magnet and ED2K lifecycle support — Added task lifecycle handling for magnet and ED2K links. History cleanup for deleted tasks — Deleted tasks can now remove matching history records. User-Agent management — Added user-agent management and improved related network preference controls. Browser extension documentation — Added the Firefox Add-ons link for the Motrix Next extension. Improvements Engine binaries — Updated bundled binaries for supported architectures. Task Detail readability — Long task names, URLs, tracker values, and copyable metadata now render more clearly. Deletion messaging — Refined localized task deletion text for clarity and consistency. Text wrapping — Improved URI input wrapping and task name multiline display. Navigation layout — Improved sub-navigation responsiveness. Disk allocation default — Changed the default file allocation method to trunc. Proxy controls — Improved proxy button styling in network preferences. Download: Motrix Next 64-bit | ARM64 | macOS ~20.0 MB (Open Source) Links: Website | macOS / Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • NVIDIA officially supports Ubuntu, as linked above with the GeForce NOW Hands on I did in collaboration with Paul Hill.
    • TO be clear I am not running linux today, however I keep thinking about it. And I want to make sure there are minimal obstacles if I decide to make that switch in the coming months.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      244
    3. 3
      Steven P.
      72
    4. 4
      FloatingFatMan
      66
    5. 5
      +Edouard
      66
  • Tell a friend

    Love Neowin? Tell a friend!