Recommended Posts

Hello there.

 

I'm having this weird video issue and I cannot figure out what exactly is causing the issue. Basically what happens is the computer will lockup and there will be these weird pixellation issues on the screen. The only way to get out of it is to forcefully reboot.

 

Troubleshooting steps: Clean Formats, Latest Drivers for Video, Memory Tests, Hard Drive tests (chkdsk)

 

It almost seems like a heat issue, which it may be, but I put a little desktop fan right on the side intake (side panel has fan) and the issue persists.

 

I'm kind of at a loss. The hardware will be 6yrs old minus the Video card in February. Any ideas on what the issue could be? I'm also attaching a picture of what the display looks like after it happens.

 

Here is my setup.

 

WIndows 8 OS, Gigabyte GA-P35-DS3L, Nvidia 560 GTX TI, Power Supply is a PC Power & Cooling 600Watt.

 

Let me know if you need any more info.

 

Here is the screenshotj3OGSQn.jpg

Link to comment
https://www.neowin.net/forum/topic/1184861-weird-video-pixellation-issue/
Share on other sites

It could be the video card, could be heat issue. Never really seen this before.

Is the video card compatible with Windows 8? If not you should consider one that will be. Also driver issue could be a cause maybe a prior version could help? Sometimes the latest drivers have issues and the safe best is to roll back to previous with no issue.
 

Wow I have not seen that before. Seen monitors go black or have lines but not boxes like that

If it constant then it is your GPU otherwise even latest WHQL nvidia driver for me with GTX 460 1 GB also cause hard lock and similar kind of issues like purple screen and garbage on screen.

 

It's not constant which is so strange. Basically how this particular incident happened was I started to watch this video, then I left my computer to go do something else. Then when I came back about half an hour later, i'm greeted with this. It does not do it everyday though. I shutdown my PC every night but the issue occurs perhaps 2 to 3 times a week.

 

 

It could be the video card, could be heat issue. Never really seen this before.

Is the video card compatible with Windows 8? If not you should consider one that will be. Also driver issue could be a cause maybe a prior version could help? Sometimes the latest drivers have issues and the safe best is to roll back to previous with no issue.

 

Wow I have not seen that before. Seen monitors go black or have lines but not boxes like that

 

I have heard that too, I believe it's the 320 series drivers have issues. Oddly enough, the reason I bought this card is because it was newer so I could play some newer games without issues. I believe the card is compatible, I bought it last summer and haven't had any real issues with it.

 

I'm trying to avoid throwing too much money at this because if I purchase any new hardware, I might as well just rebuild with newer hardware all around.

I hear you. I don't like to throw money at the problem if I can help it. It does seem like a Video Card Issue though. The maker of the card should list if it is WHQL certified for Windows 8. If it is then you would be sure.

You could also have a card going bad. Unfortunately some hardware you buy can go bad quickly. See if you can try a different driver first and if that does not work can you check cooling?

 

Does the card have a fan or does it not have one? See if it gets hot in the machine after some time. If it does better cooling would help but there are several steps you can try. Again try a different driver and make sure it is WHQL certified or tested at least.

It's not constant which is so strange. Basically how this particular incident happened was I started to watch this video, then I left my computer to go do something else. Then when I came back about half an hour later, i'm greeted with this. It does not do it everyday though. I shutdown my PC every night but the issue occurs perhaps 2 to 3 times a week.

 

 

Try 314.22 WHQL driver which is only works stable for me and tell me later back.

I had a similar thing when my video card failed (as a result of it overheating after I overclocked it). Hopefully it's not permanent, though in my case it was.

 

I guess worse case is that I have a bad card. If it is, I consider myself to be incredibly lucky. I haven't had a major component fail on me in a very long time. I don't count Hard Drives in those, so I guess I had a good run.

I guess worse case is that I have a bad card. If it is, I consider myself to be incredibly lucky. I haven't had a major component fail on me in a very long time. I don't count Hard Drives in those, so I guess I had a good run.

Yeah, it sounds like you've been pretty lucky overall and it's still possible it's a driver issue rather than a failure. That type of distortion is usually caused by faulty memory on the GPU, which typically occurs due to overheating. It could be caused by poor ventilation, bad drivers (occasionally they set the wrong voltage or don't cool as expected) or simply the luck of the draw.

 

Best of luck with it.

Get back to us once you try the older driver. That may indeed work but it also seems like others are saying overheating. If you have a spare card lying around you can pop it in and install the driver.

 

If nothing were to happen with that card then yes it is the existing video card. Also check for dust in the machine. Dust is notorious for chocking components and overheating them. I carry a leaf blower for customers and blow out all the dust when I see to much in their machines. May be extreme but it works.

I just dealt with a machine 2 weeks ago that once it was turned off I placed my hand in the middle of the case and that sucker was hot. Cant say enough about good cooling and proper ventilation!

By the way you are lucky. I have built machines for myself where everything lasted for awhile but eventually they go. Had two Antec towers from 2004 last me until last year and then did not work any more.

I will try the driver tonight and see what happens.

 

In the meantime, any recommendations on a replacement for gtx560 ti? The main game I play is TF2 and perhaps Borderlands 2 and Mass Effect 3.  My previous card was an 8800GTS (G92) and it was not powerful enough. I open to Nvidia or ATI, but I'd like to put a cap at $150. I'll probably purchase from Newegg or Amazon if the price is cheaper.

 

My mobo model is up top and the CPU is a Core2Duo E6750 and my monitor resolution is 1680x1050, so I won't need anything beefy. Thanks again for the assistance.

This is either a heat issue or a video memory failure. I've seen this way to many times during my "i-couldn't-care-less-and-overclock" -times. My guess would be bad video memory, you see these dots almost creating a pattern accross the screen, typical for corrupt video memory.

 

No-cost solution: try cleaing out your case / removing all the dust and check your heat spreader on your videocard to see if everything is seated properly, nothing may be loose.

 

No-cost solution 2: try another videocard if possible and do the same tasks and see if your system will lock up again like it does now. I bet it won't.

 

No-cost solution 3: try running a temperature meter all the time, something like hwinfo64 or something, so you can check the temps of your videocard up until the point it freezes.

 

Hope this helps?

I will try the driver tonight and see what happens.

 

In the meantime, any recommendations on a replacement for gtx560 ti? The main game I play is TF2 and perhaps Borderlands 2 and Mass Effect 3.  My previous card was an 8800GTS (G92) and it was not powerful enough. I open to Nvidia or ATI, but I'd like to put a cap at $150. I'll probably purchase from Newegg or Amazon if the price is cheaper.

 

My mobo model is up top and the CPU is a Core2Duo E6750 and my monitor resolution is 1680x1050, so I won't need anything beefy. Thanks again for the assistance.

Isn't it still under warranty? Try that if the various solutions in the thread don't help.

I will try the driver tonight and see what happens.

 

In the meantime, any recommendations on a replacement for gtx560 ti? The main game I play is TF2 and perhaps Borderlands 2 and Mass Effect 3.  My previous card was an 8800GTS (G92) and it was not powerful enough. I open to Nvidia or ATI, but I'd like to put a cap at $150. I'll probably purchase from Newegg or Amazon if the price is cheaper.

Either a GTX 650 Ti or R7 260X would be good choices in that price range. Neither are vastly more powerful than your current card (actually they're slower in some cases), so it's kinda wasted money. Make sure you try the various solutions proposed to you in this thread, this could simply be some dust preventing airflow or shorting the card.

Try 314.22 WHQL driver which is only works stable for me and tell me later back.

 

Downloading and installing this driver now. I'll give it a go and see what's up.

 

I may try the RMA route as well, just have to dig up the receipt.

Downloading and installing this driver now. I'll give it a go and see what's up.

 

I may try the RMA route as well, just have to dig up the receipt.

 

I suggest before going for RMA, give this driver a try.

I suggest before going for RMA, give this driver a try.

 

I went ahead and processed the RMA, I have 30 days to send it in. I'm just going to run my computer 24/7 until it crashes. I may still send it in, I mean using an older driver is fine as a temporary fix, but it kind of sucks having to gimp my system.

This is video memory corruption. Check your gpu temperatures (GPU-Z), try the card in a different slot, of course make sure you're running the latest drivers. Usually though this means hardware failure and you need a new one. 

 

To address the heat issue, I ran GPU-Z and right now, idling it's at 34C which seems pretty cool, although this is idling. I'm currently downloading Borderlands 2 from Steam and will test it out. When I played Borderlands, it would do similar to the screenshot in the OP when playing the game. We'll see how it goes with the older drivers.

So I installed the old driver 314.22 and I have not had a lock up issue or any pixellation. I played about 1/2 an hour of Borderlands 2 with no issues where I did have issues previously. I also played about 1 hour of Team Fortress 2 and did not get the lockup that usually happens when I have played.

 

I will continue testing but the old driver seems to be doing it.

 

My question now is, do I send the card in anyway, or is this just crappy drivers by Nvidia? It sucks that I have to use an old driver, but fortunately the games I play perform fine.

This topic is now closed to further replies.
  • Posts

    • Dopamine 3.0.6 by Razvan Serea Dopamine is an awesome free audio player which tries to make organizing and listening to music as simple and pretty as possible. Dopamine has been designed for Windows 7, Windows 8.x and Windows 10 and plays mp3, ogg vorbis, flac, wma and m4a/aac music formats quite well. The best part? It's created by long-time Neowin member, Raphaël Godart. If you’re looking for a music player to handle a large music collection, you should definitely give Dopamine a try. Dopamine 3.0.6 changelog: Fixed Manually edited album covers are overwritten on the next collection refresh Fixed AppImage package not working on modern GNU/Linux distributions Deleting song from playlist sometimes fails Playback controls only work when clicking on upper half of the buttons It's unclear that files must be tagged with an external ReplayGain scanner (for example rsgain) before normalization can take effect. Change to Artist or Album tags is not reflected in the song list view nor in the Now Playing information ReplayGain issues Smart playlist filters ignore text containing accents or other special characters Some MP3 files trigger an "MPEG header not found" error due to a too-narrow initial MPEG header scan range Changed Updated the Vietnamese translation Download: Dopamine 3.0.6 | 122.0 MB (Open Source) Links: Home Page | Forum Discussion | Screenshot | Other OSes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • BleachBit 6.0.1 Beta by Razvan Serea When your computer is getting full, BleachBit quickly frees disk space. When your information is only your business, BleachBit guards your privacy. With BleachBit you can free cache, delete cookies, clear Internet history, shred temporary files, delete logs, and discard junk you didn't know was there. Designed for Linux and Windows systems, it wipes clean thousands of applications including Firefox, Microsoft Edge, Google Chrome, Opera, Safari, and more. Beyond simply deleting files, BleachBit includes advanced features such as shredding files to prevent recovery, wiping free disk space to hide traces of files deleted by other applications, and vacuuming Firefox to make it faster. Better than free, BleachBit is open source. BleachBit has many useful features: Delete your private files so completely that "even God can't read them" according to South Carolina Representative Trey Gowdy. Simple operation: read the descriptions, check the boxes you want, click preview, and click delete. Multi-platform: Linux and Windows Free of charge and no money trail Free to share, learn, and modify (open source) No adware, spyware, malware, browser toolbars, or "value-added software" Translated to 64 languages besides American English Shred files to hide their contents and prevent data recovery Shred any file (such as a spreadsheet on your desktop) Overwrite free disk space to hide previously deleted files Portable app for Windows: run without installation Command line interface for scripting and automation CleanerML allows anyone to write a new cleaner using XML Automatically import and update winapp2.ini cleaner files (a separate download) giving Windows users access to 2500+ additional cleaners Frequent software updates with new features Going beyond standard deletion of files, BleachBit has several advanced cleaners: Clear the memory and swap on Linux Delete broken shortcuts on Linux Delete the Firefox URL history without deleting the whole file—with optional shredding Delete Linux localizations: delete languages you don't use. More powerful than localepurge and available on more Linux distributions. Clean APT for Debian, Ubuntu, Kubuntu, Xubuntu, and Linux Mint Find widely-scattered junk such as Thumbs.db and .DS_Store files. Execute yum clean for CentOS, Fedora, and Red Hat to remove cached package data Delete Windows registry keys—often where MRU (most recently used) lists are stored Delete the OpenOffice.org recent documents list without deleting the whole Common.xcu file Overwrite free disk space to hide previously files Vacuum Firefox, Google Chrome, Liferea, Thunderbird, and Yum databases: shrink files without removing data to save space and improve speed Surgically remove private information from .ini and JSON configuration files and SQLite3 databases without deleting the whole file Overwrite data in SQLite3 before deleting it to prevent recovery (optional) BleachBit 6.0.1 Beta release notes: BleachBit 6.0.1 beta is now available for testing. This maintenance-focused release includes bug fixes, updated translations, and a range of safe enhancements. This release fixes a Windows security issue that could allow arbitrary file deletion during privileged cleaning (reported by Zeze with TeamT5). It also adds new cleaners (including a DNS cache cleaner, Claude Code, and Visual Studio Code forks), support for multiple Chrome and Edge profiles, new deep scan options for developer directories like node_modules and venv, and safer, faster file shredding. All Platforms Added cleaners for Claude Code, DNS cache, and many Visual Studio Code forks. Added support for multiple Chrome and Edge profiles. Chrome can now clean downloaded AI models. Deep Scan can optionally remove venv, __pycache__, node_modules, and .angular directories. Deep Scan is faster by skipping directories on the keep list. File shredding is safer, faster, and leaves fewer recoverable traces. Improved handling of cookies, symlinks, Unicode filenames, external processes, and configuration files. Improved Expert Mode warnings and long warning dialogs. Fixed crashes related to cleaner detection, invalid Unicode, and malformed cleaner data. Clipboard is now cleared automatically after shredding files via paste operations. Linux Added AppImage support. Added cleaners for Visual Studio Code, Codeium, Librewolf (.deb), Transmission (Flatpak), and Profanity. Improved Linux trash detection, including Snap-installed applications and mounted drives. Fixed Wayland root CLI issues and several Snap-related problems. Improved package dependencies, AppStream metadata, and desktop file handling. Fixed startup crashes when Python Requests is unavailable. Windows Fixed a security vulnerability that could allow arbitrary file deletion when cleaning with elevated privileges. Added %WindowsSystem% variable support. Improved clipboard clearing using native Windows APIs. Improved installer experience on unsupported Windows versions. Reduced installer size and improved application robustness. Fixed Unicode handling, filename anonymization, Git revision reporting, and splash screen stability. [full release notes] Download: BleachBit 6.0 | Portable | ~20.0 MB (Open Source) View: BleachBit Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DriversCloud 12.1.6 by Razvan Serea With DriversCloud (formerly My-Config.com), you can explore your computer easily, safely and free. The application quickly scans your PC and identifies the hardware and software components. DriversCloud then establishes a list of the different drivers compatible with your OS and hardware. Download the drivers needed for the proper functioning of your computer. To detect your drivers, DriversCloud also displays a detailed summary of your hardware and software configuration, analyzes your BSOD, monitors in real-time your PC voltages and temperatures and lets you share your configuration online. Once the hardware components have been detected, you will be able to obtain with just a few clicks the latest drivers corresponding to the identified hardware. You can record your configuration on the site for free, and can get the corresponding URL to post the configuration to technical forums, e-mail and social networks. You can also download the detection result (the configuration) as a PDF file. To protect the user's privacy and data confidentiality, a 4-level confidentiality system was created that filters the XML marks and gives control to the user. The default level can be modified in the preferences. Using the maximum level will prevent the user from publishing his configuration and generating a corresponding PDF file. In non-connected mode, each XML configuration is stored on the server for one day (for practical reasons). However, you are given the opportunity to manually delete it. Created in 2004, and continually improved, My-Config.com has established itself on the web as a free service to PC users running Windows and Linux operating systems. The service is designed to work with the most common Internet browsers (Edge, Firefox, Chrome, Safari). Download: DriversCloud 64-bit | 20.0 MB (Freeware) Download: DriversCloud 32-bit | 18.9 MB Link: DriversCloud Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      193
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!