• 0

Mathematical Table Using Squared, Cubed, Square-root, and Cubed Root


Question

I have to create a table exactly like the one in the attachment using squared, cubed, square-root, and cube root. I am having a hard time creating the code and been struggling for hours, can anyone point me towards the right direction or have the code do this? thanks

 

post-507579-0-23039300-1383783580.png

14 answers to this question

Recommended Posts

  • 0

I am pretty new at this but this is all I got so far:

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double x = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;

    cout << "Where would you like to start? ";
    cin >> x;
    cout << endl;

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;

    cout << " x sqrt(x) x^2\n\n x^3\n";

    squared = x*x;
    cubed = x*x*x;
    squareRoot = sqrt (x);
    cubeRoot = pow(x), 1/3;


    return 0;
}

  • 0

here is my updated one, I can't get it to stop looping. I want it to stop at the number of rows when the user enters it

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;
        

    squared = number*number;
    cubed = number*number*number;
    squareRoot = sqrt (number);
    cubeRoot = pow((double)(number),(double)1/3);

    do
    {
    cout << number << "  " << squared << "  " << cubed << "  " << squareRoot << "  " << cubeRoot << "  " << ceiling << "  " << floor << "  " << endl;
    number++, squared++, cubed++, squareRoot++, cubeRoot++, ceiling++, floor++;
    }
    while (number > 0);


    return 0;
}

  • 0

Well obviously it isn't going to stop since you increment 'number' inside the loop and have 'while (number < 0)' as your condition. The instructions say use a for-loop, so use a for-loop.

 

http://code.wikia.com/wiki/For_loop

  • 0

okay I stopped it from looping but is there any suggestions you would suggest for me to revise my code to make it look like the table in the attachment?

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;
        

    squared = number*number;
    cubed = number*number*number;
    squareRoot = sqrt (number);
    cubeRoot = pow((double)(number),(double)1/3);

    do
    {
    cout << number << "  " << squared << "  " << cubed << "  " << squareRoot << "  " << cubeRoot << "  " << ceiling << "  " << floor << "  " << endl;
    ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;
    break;
    }
    while (number > 0);


    return 0;
}

  • 0

do
     {
     cout << number << "  " << squared << "  " << cubed << "  " << squareRoot << "  " << cubeRoot << "  " << ceiling << "  " << floor << "  " << endl;
     ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;
     [b]break;[/b]
     }
     while (number > 0);
You don't want that (the break) there. It will exit the do...while loop immediately after the first line of output.

Also, the way you've written it you should be decrementing "number" rather than incrementing it, or you could create a second count variable and increment it until it reaches the target number. As it stands it will fail because "number" your starting calculation number so you *should* be using "rows" in the do loop test instead of "number". :)

EDIT: Ugh, sorry, misread. You want to test against rows, but obviously will want to continue incrementing number.

  • 0

okay I just revised this and removed the break, so do you got any suggestions how to revise my code from looping and make my table to look exactly like the one in the attachment?

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;

    while (number <= 0)
    {

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;
    }

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;


    squared = number*number;
    cubed = number*number*number;
    squareRoot = sqrt (number);
    cubeRoot = pow((double)(number),(double)1/3);

    do
    {
    cout << number << setw(5) << squared << setw(5) << cubed << setw(5) << squareRoot << setw(5) << cubeRoot << setw(5) << ceiling << setw(5) << floor << setw(5);
    ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;
    }
    while (number > 0);


    return 0;
}

  • 0

You could use tabs instead of spaces. I think it's "\t" in C?

You still need to fix your while statement, too. Unless you enter a negative starting number it will always be greater than zero. Plus, you're outputting your rows in the loop so you need to be testing against that variable.

for (int rowCount = 0; rowCount < rows; rowCount++)

{

...code...

}

  • 0

is that the correct place where I place the " (int rowCount = 0; rowCount < rows; rowCount++) " ? I placed it before the "do", but it still loops

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;


    {

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;
    }

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;


    squared = number*number;
    cubed = number*number*number;
    squareRoot = sqrt (number);
    cubeRoot = pow((double)(number),(double)1/3);

    for (int rowCount = 0; rowCount < rows; rowCount++)

    do
    {
    cout << number << setw(5) << squared << setw(5) << cubed << setw(5) << squareRoot << setw(5) << cubeRoot << setw(5) << ceiling << setw(5) << floor << setw(5);
    ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;

    }
    while (number > 0);


    return 0;
}

  • 0

No, it should replace the do...while construct. The assignment you posted said to use a for... loop.

     for (int rowCount = 0; rowCount < rows; rowCount++)
     {
     cout << number << setw(5) << squared << setw(5) << cubed << setw(5) << squareRoot << setw(5) << cubeRoot << setw(5) << ceiling << setw(5) << floor << setw(5);
     ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;

     }
  

     return 0;
 }
  • 0

thank you for helping to make the program to stop the loop but my values still display diagonally and not evenly line up like a regular table should. it looks really random and values are located everywhere:

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;


    {

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;
    }

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;


    squared = number*number;
    cubed = pow(number, 3.0);
    squareRoot = sqrt (number);
    cubeRoot = pow(number, 1/3);

    for (int rowCount = 0; rowCount < rows; rowCount++)
     {
     cout << number << setw(5) << squared << setw(5) << cubed << setw(5) << squareRoot << setw(5) << cubeRoot << setw(5) << ceiling << setw(5) << floor << setw(5);
     ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;

     }
 

     return 0;
 }
 

  • 0

I tried adding the the titles for my table but they still look very uneven looking:

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;


    {

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;
    }

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;


    squared = number*number;
    cubed = pow(number, 3.0);
    squareRoot = sqrt (number);
    cubeRoot = pow(number, 1/3);

    cout << "Number" << setw(6) << "Squared" << setw(6) << "Cubed" << setw(6) << "SquareRoot" << setw(6) << "CubeRoot" << setw(6) << "Ceiling" << setw(6) << "Floor" << setw(6);

    for (int rowCount = 0; rowCount < rows; rowCount++)
    {
     cout << number << setw(6) << squared << setw(6) << cubed << setw(6) << squareRoot << setw(6) << cubeRoot << setw(6) << ceiling << setw(6) << floor << setw(6);
     ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;

     }
 

     return 0;
 }
 

  • 0

How about you worry about logic first.

 

You need a for loop, right?

You don't even need to be storing them into variables.

This whole thing could be real simple.

 

Your only inputs come from the user, and there are only 2.

So.... the pseudocode logic then becomes:

 

// Get starting point n (double)

// Get number of rows (integer)

// Print header

// For each row, print the set of values for the row of data, incrementing n by 0.1 in the process

 

Your for-loop would then look like:

    for (int intRow = 0; intRow < intRows; intRow++)
    {

         // Output formatted n

         cout << n

 

         // Output formatted squared

         cout << n*n

 

         // Output formatted cubed

         cout << n*n*n

 

         // etc...

 

         // increment n by 0.1

         n += 0.1

     }

 

The point of the exercise is to understand the LOGIC, not to worry a ton about the formatting.

Does the LOGIC make more sense to you?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • how big is your HDD that only has 100gb left? I take it this the main drive.  Is this a pc or laptop? I ask because changing hdd in pcs are much easier. You sure a good clean/purge of data wouldn't clear up space - have you ran disk cleanup? Which is part of windows..  You can for sure move data to your external drive, install programs to it, etc - but using it to store updates?   
    • How to record screen as GIF in Windows 11 by Taras Buria The Snipping Tool app is already quite a capable program for screenshots and screen recordings. Still, there is always room for improvement, and many users agree that the app needs the ability to save screen recordings as GIFs. Microsoft heard those users, and recent updates introduced the long-requested feature, allowing you to record your screen as a GIF. Here is how to do it. Record screen as a GIF in Windows 11 Note: By the time of publishing this article, GIF support in Snipping Tool is only available to Windows Insiders. However, you can enable that feature on stable Windows 11 releases as well; here is how: Go to store.rg-adguard.net, select ProductID in the first drop-down, paste 9MZ95KL8MR0L into the search box, and select Fast in the last drop-down. Press the checkmark button. Find and download Microsoft.ScreenSketch_2022.2505.21.0_neutral_~_8wekyb3d8bbwe.msixbundle in the list of apps. The version number could be newer, just make sure you are downloading an msixbundle file. Note that the browser will warn you about downloading a potentially harmful file. Open the file and click Update. Download ViveTool from GitHub and unpack the files in a convenient and easy-to-find folder. Run Command Prompt as Administrator and navigate to the folder containing the ViveTool files with the CD command. For example, if you have placed ViveTool in C:\Vive, type CD C:\Vive. Type vivetool /enable /id:47081492 and press Enter. The steps above might seem a bit tedious, but that is the only way to get GIF support in Snipping Tool without enrolling your device in the Windows Insider program. We will update the article once the feature is publicly available, so there is no need to jump through all the hoops just to make it work. Tip: You can always roll back Snippint Tool to the latest version from the Microsoft Store by uninstalling it and downloading it again. Now, with GIF support enabled in Snipping Tool, here is how to save a screen recording as a GIF in Windows 11: Press Win + Shift + S, select screen recording mode and record whatever you want. After the recording is over, Snipping Tool will open your video so that you can view, trim, or save it. At this point, all you have to do is click the GIF button in the upper-right corner. On the next screen, select your GIF quality and click Export to save as a file or Copy to copy it to the clipboard. And that is how you save screen recordings as GIFs in Windows 11. Note that Snipping Tool can only save GIFs for up to 30 seconds. Anything beyond that will be cut off. You might think that Clipchamp, Windows 11's built-in video editor, is a good option when you want to save a screen recording as a GIF. However, it really sucks at that. The video duration is capped at just 15 seconds, which is even worse than the Snipping Tool, and the output resolution is hilariously low. The latter makes it impossible to distinguish any details, and all you get is a blurry, pixelated mess. No, Clipchamp is not a good option for that. If you want to create GIFs that are longer than 30 seconds, a good option is to go with apps like ShareX, which is extremely flexible and customizable (and also free, which makes it one of our favorite must-have apps for Windows 11). Alternatively, you can record a video using the Snipping Tool and then convert it to a GIF using web-based services like Ezgif, another great free utility. Keep in mind that the larger your video resolution and the longer its duration, the bigger the final GIF size. Depending on the settings, GIFs could reach hundreds of megabytes, so you have to set your expectations correctly (and so do the settings, too).
    • I'll give you an example of "the settings problem." As awful as the HP Smart app is, it's magnitudes more useful than Settings when I need to do some deep dive stuff on my HP Officejet.
    • I hate to defend Apple but this marketing and they are only "desperate" to move from #3 to #1 for biggest company in the world.
    • There's very granular stuff in the legacy Control Panel that will probably never be accessible from settings. But that stuff will still be there if you know where to look.
  • Recent Achievements

    • Week One Done
      DXB APPS earned a badge
      Week One Done
    • One Month Later
      DecaffKnight94 earned a badge
      One Month Later
    • Dedicated
      S.P earned a badge
      Dedicated
    • One Month Later
      adxnksd42031 earned a badge
      One Month Later
    • Rising Star
      aphanic went up a rank
      Rising Star
  • Popular Contributors

    1. 1
      +primortal
      661
    2. 2
      ATLien_0
      253
    3. 3
      Michael Scrip
      234
    4. 4
      Steven P.
      155
    5. 5
      +FloatingFatMan
      149
  • Tell a friend

    Love Neowin? Tell a friend!