• 0

Mathematical Table Using Squared, Cubed, Square-root, and Cubed Root


Question

I have to create a table exactly like the one in the attachment using squared, cubed, square-root, and cube root. I am having a hard time creating the code and been struggling for hours, can anyone point me towards the right direction or have the code do this? thanks

 

post-507579-0-23039300-1383783580.png

14 answers to this question

Recommended Posts

  • 0

I am pretty new at this but this is all I got so far:

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double x = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;

    cout << "Where would you like to start? ";
    cin >> x;
    cout << endl;

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;

    cout << " x sqrt(x) x^2\n\n x^3\n";

    squared = x*x;
    cubed = x*x*x;
    squareRoot = sqrt (x);
    cubeRoot = pow(x), 1/3;


    return 0;
}

  • 0

here is my updated one, I can't get it to stop looping. I want it to stop at the number of rows when the user enters it

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;
        

    squared = number*number;
    cubed = number*number*number;
    squareRoot = sqrt (number);
    cubeRoot = pow((double)(number),(double)1/3);

    do
    {
    cout << number << "  " << squared << "  " << cubed << "  " << squareRoot << "  " << cubeRoot << "  " << ceiling << "  " << floor << "  " << endl;
    number++, squared++, cubed++, squareRoot++, cubeRoot++, ceiling++, floor++;
    }
    while (number > 0);


    return 0;
}

  • 0

Well obviously it isn't going to stop since you increment 'number' inside the loop and have 'while (number < 0)' as your condition. The instructions say use a for-loop, so use a for-loop.

 

http://code.wikia.com/wiki/For_loop

  • 0

okay I stopped it from looping but is there any suggestions you would suggest for me to revise my code to make it look like the table in the attachment?

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;
        

    squared = number*number;
    cubed = number*number*number;
    squareRoot = sqrt (number);
    cubeRoot = pow((double)(number),(double)1/3);

    do
    {
    cout << number << "  " << squared << "  " << cubed << "  " << squareRoot << "  " << cubeRoot << "  " << ceiling << "  " << floor << "  " << endl;
    ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;
    break;
    }
    while (number > 0);


    return 0;
}

  • 0

do
     {
     cout << number << "  " << squared << "  " << cubed << "  " << squareRoot << "  " << cubeRoot << "  " << ceiling << "  " << floor << "  " << endl;
     ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;
     [b]break;[/b]
     }
     while (number > 0);
You don't want that (the break) there. It will exit the do...while loop immediately after the first line of output.

Also, the way you've written it you should be decrementing "number" rather than incrementing it, or you could create a second count variable and increment it until it reaches the target number. As it stands it will fail because "number" your starting calculation number so you *should* be using "rows" in the do loop test instead of "number". :)

EDIT: Ugh, sorry, misread. You want to test against rows, but obviously will want to continue incrementing number.

  • 0

okay I just revised this and removed the break, so do you got any suggestions how to revise my code from looping and make my table to look exactly like the one in the attachment?

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;

    while (number <= 0)
    {

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;
    }

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;


    squared = number*number;
    cubed = number*number*number;
    squareRoot = sqrt (number);
    cubeRoot = pow((double)(number),(double)1/3);

    do
    {
    cout << number << setw(5) << squared << setw(5) << cubed << setw(5) << squareRoot << setw(5) << cubeRoot << setw(5) << ceiling << setw(5) << floor << setw(5);
    ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;
    }
    while (number > 0);


    return 0;
}

  • 0

You could use tabs instead of spaces. I think it's "\t" in C?

You still need to fix your while statement, too. Unless you enter a negative starting number it will always be greater than zero. Plus, you're outputting your rows in the loop so you need to be testing against that variable.

for (int rowCount = 0; rowCount < rows; rowCount++)

{

...code...

}

  • 0

is that the correct place where I place the " (int rowCount = 0; rowCount < rows; rowCount++) " ? I placed it before the "do", but it still loops

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;


    {

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;
    }

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;


    squared = number*number;
    cubed = number*number*number;
    squareRoot = sqrt (number);
    cubeRoot = pow((double)(number),(double)1/3);

    for (int rowCount = 0; rowCount < rows; rowCount++)

    do
    {
    cout << number << setw(5) << squared << setw(5) << cubed << setw(5) << squareRoot << setw(5) << cubeRoot << setw(5) << ceiling << setw(5) << floor << setw(5);
    ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;

    }
    while (number > 0);


    return 0;
}

  • 0

No, it should replace the do...while construct. The assignment you posted said to use a for... loop.

     for (int rowCount = 0; rowCount < rows; rowCount++)
     {
     cout << number << setw(5) << squared << setw(5) << cubed << setw(5) << squareRoot << setw(5) << cubeRoot << setw(5) << ceiling << setw(5) << floor << setw(5);
     ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;

     }
  

     return 0;
 }
  • 0

thank you for helping to make the program to stop the loop but my values still display diagonally and not evenly line up like a regular table should. it looks really random and values are located everywhere:

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;


    {

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;
    }

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;


    squared = number*number;
    cubed = pow(number, 3.0);
    squareRoot = sqrt (number);
    cubeRoot = pow(number, 1/3);

    for (int rowCount = 0; rowCount < rows; rowCount++)
     {
     cout << number << setw(5) << squared << setw(5) << cubed << setw(5) << squareRoot << setw(5) << cubeRoot << setw(5) << ceiling << setw(5) << floor << setw(5);
     ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;

     }
 

     return 0;
 }
 

  • 0

I tried adding the the titles for my table but they still look very uneven looking:

 

#include <iostream>
#include <cmath>
#include <iomanip>
using namespace std;

int main()
{

    double number = 0;
    double rows = 0;
    double squared = 0;
    double cubed = 0;
    double squareRoot = 0;
    double cubeRoot = 0;
    int ceiling = 0;
    int floor = 0;


    {

    cout << "Where would you like to start? ";
    cin >> number;
    cout << endl;
    }

    cout << "And how many rows? ";
    cin >> rows;
    cout << endl;


    squared = number*number;
    cubed = pow(number, 3.0);
    squareRoot = sqrt (number);
    cubeRoot = pow(number, 1/3);

    cout << "Number" << setw(6) << "Squared" << setw(6) << "Cubed" << setw(6) << "SquareRoot" << setw(6) << "CubeRoot" << setw(6) << "Ceiling" << setw(6) << "Floor" << setw(6);

    for (int rowCount = 0; rowCount < rows; rowCount++)
    {
     cout << number << setw(6) << squared << setw(6) << cubed << setw(6) << squareRoot << setw(6) << cubeRoot << setw(6) << ceiling << setw(6) << floor << setw(6);
     ++number, ++squared, ++cubed, ++squareRoot, ++cubeRoot, ++ceiling, ++floor;

     }
 

     return 0;
 }
 

  • 0

How about you worry about logic first.

 

You need a for loop, right?

You don't even need to be storing them into variables.

This whole thing could be real simple.

 

Your only inputs come from the user, and there are only 2.

So.... the pseudocode logic then becomes:

 

// Get starting point n (double)

// Get number of rows (integer)

// Print header

// For each row, print the set of values for the row of data, incrementing n by 0.1 in the process

 

Your for-loop would then look like:

    for (int intRow = 0; intRow < intRows; intRow++)
    {

         // Output formatted n

         cout << n

 

         // Output formatted squared

         cout << n*n

 

         // Output formatted cubed

         cout << n*n*n

 

         // etc...

 

         // increment n by 0.1

         n += 0.1

     }

 

The point of the exercise is to understand the LOGIC, not to worry a ton about the formatting.

Does the LOGIC make more sense to you?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Firefox, for privacy, wide range of plugins without having to suffer the latest Google manifest restrictions and when used on Android for the mobile browser plugins like an ad-blocker, sadly that option isn't available to me now I've swapped to iOS as outside of the EU Firefox mobile is just a reskin of Safari
    • Ok will give that a shot soon as wake up in morning.     Hopefully does restore it working right  
    • Try doing a reset/repair on the Windows store: To reset the Microsoft Store on Windows 11, press the Windows key + I to open Settings, go to Apps & features, find Microsoft Store, click on it, select Advanced options, and then click the Reset button. This will clear the cache and restore the app to its default state, which can help resolve issues.
    • Microsoft's new Exchange Message Trace: What admins need to know before September by Paul Hill Microsoft has just announced the general availability of the new Message Trace in the Exchange admin center (EAC) in Exchange Online for its worldwide (WW) customers. The Redmond giant said that it’ll begin rolling it out in mid-June and complete the rollout in July. Message Trace in the Exchange Admin Center for Exchange Online is a tool that lets admins trace which path emails took as they traveled through the Microsoft 365 organization. It lets admins see if emails were received, rejected, or deferred. It is helpful for troubleshooting mail flow issues and validating policy changes. To get started with the new Message Trace, admins can access it by going to the Exchange admin center > Mail flow > Message Trace. While the Windows-maker has received positive feedback during the Public Preview, you can still provide your thoughts through Exchange admin center > Give Feedback. In addition, Microsoft will continue to maintain the old Message Trace user experience in Exchange admin center and cmdlets for several months to ease the transition, however, they will be deprecated for WW customers starting from September 1. The Reporting Webservice support for Message Trace data will also begin deprecating on this date. A side note to mention here is that this timeline only applies to the WW environment and doesn’t affect GCC, GCC-High, DOD, or other sovereign clouds. More information about the switch over for those will be provided in the second half of the year. Who it affects, and how These changes need to be noted by Exchange Online administrators and IT professionals as those are the people who will be directly affected. Specifically, it will affect anyone managing mail flow and troubleshooting email delivery in Exchange Online. Those who are affected will have to get switched over to the new Message Trace before Microsoft starts deprecating features in several months time. Admins will want to act promptly to avoid any unforeseen issues that could arise. Another detail that admins should be aware of is that scripts that rely on the older “Get-MessageTrace” or “Get-MessageTraceDetail” cmdlets will break on September 1. To address this, admins will need to update their scripts to use the new “Get-MessageTraceV2” and the “Get-MessageTraceDetailV2” cmdlets. Finally, any admins out there using the Reporting Webservice for Message Trace data will also need to make a change. They will need to shift to the new Message Trace PowerShell cmdlets. Why it’s happening Microsoft has been working on a new Message Trace experience, incorporating feedback from the Public Preview phase, to improve its design and performance. The switch gives Microsoft the opportunity to standardize and modernize admin interfaces and the underlying technologies. What to watch for While September 1 may seem like a long way away, fixing any issues, such as scripts due to deprecations, could take some time. Any admins managing the affected items need to ensure they deal with affected components in a timely manner. In terms of documentation, Microsoft has so far only released the Public Preview document which highlights the changes between the old and new versions. Microsoft says that it will publish cmdlet documentation for the new Message Trace cmdlets by the time of the general availability, so admins should look out for that.
    • Microsoft PC Manager 3.17.2.0 (Offline Installer) by Razvan Serea With Microsoft PC Manager, users can easily perform basic computer maintenance and enhance the speed of their devices with just one click. This app offers a range of features, including disk cleanup, startup app management, virus scanning, Windows Update checks, process monitoring, and storage management. Microsoft PC Manager key features: Storage Manager- easily uninstall infrequently used apps, manage large files, perform a cleanup, and set up Storage Sense to automatically clear temporary files. Health Checkup feature -scans for potential problems, viruses, and startup programs to turn off. It helps you identify unnecessary items to remove, optimizing your system's performance. Pop-up Management - block pop-up windows from appearing in apps. Windows Update - scans your system for any pending updates. Startup Apps - enable or disable startup apps on your PC, allowing you to optimize your system's startup performance. Browser Protection - rest assured that harmful programs cannot alter your default browser. Also enables you to change your default browser. Process Management - allows you to conveniently terminate any active process, ensuring optimal system performance and resource utilization. Anti-virus protection - Fully integrated with Windows Security. Safeguard your PC anytime. Quick Steps: Download Microsoft PC Manager Offline Installer (APPX/MSIX) with Adguard Adguard serves as a third-party online service, offering a user-friendly method for directly downloading appx, appxbundle, and msixbundle files from the Microsoft Store. Official download links will be generated for both the app's various versions and its dependency packages. How to download Microsoft PC Manager Offline Installer (APPX/MSIX) 1. Initially, you must find the app URL within the Microsoft Store. Access the Microsoft Store via your browser and search for "Microsoft PC Manager". Once located, copy the app URL, which includes the product ID, either from the address bar or from the provided link below. https://apps.microsoft.com/detail/9PM860492SZD 2. Now paste the app URL into the designated area, then click the check mark button to produce a direct download link. 3. To download, right-click the relevant link and select “Save link as…” from your browser's menu. Occasionally, Microsoft Edge may flag the download as insecure. In such cases, consider utilizing alternative browsers such as Google Chrome or Firefox to successfully complete the download. Microsoft PC Manager is a completely free tool optimized exclusively for use on Windows 10 (version 1809 or newer) and Windows 11. Download: Microsoft PC Manager 3.17.2.0 | from Microsoft Store View: Microsoft PC Manager Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Leonard grant earned a badge
      Week One Done
    • One Month Later
      portacnb1 earned a badge
      One Month Later
    • Week One Done
      portacnb1 earned a badge
      Week One Done
    • First Post
      m10d earned a badge
      First Post
    • Conversation Starter
      DarkShrunken earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      264
    2. 2
      snowy owl
      158
    3. 3
      +FloatingFatMan
      145
    4. 4
      ATLien_0
      140
    5. 5
      Xenon
      131
  • Tell a friend

    Love Neowin? Tell a friend!