Recommended Posts

I live in 3 floors home. My flat is 2nd floor.

 

My Belkin N-300 ADSL router is attached to ADSL line in the 3rd floor most west room.

 

My HP laptop (in signature) and my TP link TL-WA801ND Access point lies in the 2nd floor(center of it).I am using the access point as a WiFi repeater.

I have a laptop and a tablet in the center of the 1st floor, but getting no signal, unless I go extreme west, even in my garden just outside the house.

 

Router:

  Firmware Version

1.00.41(Jan 21 2011 11:10:33)    Boot Version V1.06               DHCP Enabled    Features   Firewall Enabled     security WPA/WPA2-Personal (PSK) UPnP Enabled Remote management Disabled WPS Disabled  

 

HPLaptop WLAN:  Intel Centrino Wireless-N 1030 BGN 1x2 HMC
 

Dell Laptop : Dell inspiron mini 1018. Tablet: BGN wifi chip

 

 

A) I don't think this signal is usual....right?
B) This repeater I bought,I think it is not helping.How can I use it well?

 

Get a repeater or extender from Amped Wireless which you get more coverage in the house.

 

Or replace the belkin router with a new router from Amped Wireless.

 

If you get a product from Amped Wireless, then you will be able to use anywhere in the house and outside.

Wireless signal travels up better than down. I live in a bi-level house and when I put my wireless on the second floor the signal on the first is very weak to non existent, but when I put the wireless on the first floor just about all of the second floor is covered.

When you use a repeater, you want to put the repeater where you get strong signal from the wap, you don't want it in an area where the signal is weak or at 50% . I would rather see a hard wire run from your router to another wap but you are the only one to be able to tell if it is feasible.

As far as extending your signal to the outside, if your wireless supports the use of swapping antennas install a larger antenna to increase coverage area.

Yes you can...  Place it order then fill your info and choose Egypt from the pull down list, then fill your payment method.

 

Edit: Check the screenshot:

attachicon.gifsamplefororder.jpg

I have just paid to buy the Belkin N300 router and Access point.So, I have no available budget right now for a switch

 

simple fix try another Chanel or you might be on busy one

um i live in a condo and the amount of wifi is ridicules but i work around it

lots of wifi analyzers out there.

 

I don't have too much networks, actually one or 2 max.

Maybe your channel have some interference. Use inSSIDer to find the best channel.

I tried it and changes channel, but in vain

 

Wireless signal travels up better than down. I live in a bi-level house and when I put my wireless on the second floor the signal on the first is very weak to non existent, but when I put the wireless on the first floor just about all of the second floor is covered.

When you use a repeater, you want to put the repeater where you get strong signal from the wap, you don't want it in an area where the signal is weak or at 50% . I would rather see a hard wire run from your router to another wap but you are the only one to be able to tell if it is feasible.

As far as extending your signal to the outside, if your wireless supports the use of swapping antennas install a larger antenna to increase coverage area.

 

ADSL router is hoocked to line in the 3rd floor.Ican't change that.I direct the two antenna downward.

 

 

When you use a repeater, you want to put the repeater where you get strong signal from the wap, you don't want it in an area where the signal is weak or at 50% . I would rather see a hard wire run from your router to another wap but you are the only one to be able to tell if it is feasible.

 

I put the repeater where signal is at least 70%. I don't understand the hard wire thing!!!!!

 

 

As far as extending your signal to the outside, if your wireless supports the use of swapping antennas install a larger antenna to increase coverage area.

That, I can do.I have two detachable antennae.I will swap one with a stronger antenna.

move the devices around.  That is the best that you are going to be able to do with the resources available without purchasing new items.  This is what is known as being stuck between a rock and a hard place.  When you have exhausted location and frequency of the devices the only other option would be to purchase something.  I can tell you that with antennas you can increase range significantly, I can tell you putting in more waps would increase range as well.  Your goal is to increase range.  There isn't any more that you are going to be able to do without purchasing other than moving the devices around to get the coverage in the areas you want.

I have just paid to buy the Belkin N300 router and Access point.So, I have no available budget right now for a switch

 

If you just bought it like a week ago or two.. which you have up to 30 days before return...depends the return policy in your area. you can take it back and get a new one.. 

 

Belkin products suck.   You can try swap the antenna but I doubt they will help.

 

Ask Santa that you get Amped Wireless router for Christmas.... never hurt to try.

You do realize swapping with the right antenna apparatus could increase the range to miles vs feet, right? They have done this with crappy b routers and g routers you would buy at a store...spanning up to 50 miles, granted that is a directional beam vs omni directional, but it still impressive with a Soho router.

If you just bought it like a week ago or two.. which you have up to 30 days before return...depends the return policy in your area. you can take it back and get a new one.. 

 

Belkin products suck.   You can try swap the antenna but I doubt they will help.

 

Ask Santa that you get Amped Wireless router for Christmas.... never hurt to try.

 

Unfortunately, I am past the return time, so I am stuck with both of them

You do realize swapping with the right antenna apparatus could increase the range to miles vs feet, right? They have done this with crappy b routers and g routers you would buy at a store...spanning up to 50 miles, granted that is a directional beam vs omni directional, but it still impressive with a Soho router.

 

This is news to me, I will try to get a new stronger antenna.But which parameter should be bigger/stronger?

This topic is now closed to further replies.
  • Posts

    • Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!