Recommended Posts

I live in 3 floors home. My flat is 2nd floor.

 

My Belkin N-300 ADSL router is attached to ADSL line in the 3rd floor most west room.

 

My HP laptop (in signature) and my TP link TL-WA801ND Access point lies in the 2nd floor(center of it).I am using the access point as a WiFi repeater.

I have a laptop and a tablet in the center of the 1st floor, but getting no signal, unless I go extreme west, even in my garden just outside the house.

 

Router:

  Firmware Version

1.00.41(Jan 21 2011 11:10:33)    Boot Version V1.06               DHCP Enabled    Features   Firewall Enabled     security WPA/WPA2-Personal (PSK) UPnP Enabled Remote management Disabled WPS Disabled  

 

HPLaptop WLAN:  Intel Centrino Wireless-N 1030 BGN 1x2 HMC
 

Dell Laptop : Dell inspiron mini 1018. Tablet: BGN wifi chip

 

 

A) I don't think this signal is usual....right?
B) This repeater I bought,I think it is not helping.How can I use it well?

 

Get a repeater or extender from Amped Wireless which you get more coverage in the house.

 

Or replace the belkin router with a new router from Amped Wireless.

 

If you get a product from Amped Wireless, then you will be able to use anywhere in the house and outside.

Wireless signal travels up better than down. I live in a bi-level house and when I put my wireless on the second floor the signal on the first is very weak to non existent, but when I put the wireless on the first floor just about all of the second floor is covered.

When you use a repeater, you want to put the repeater where you get strong signal from the wap, you don't want it in an area where the signal is weak or at 50% . I would rather see a hard wire run from your router to another wap but you are the only one to be able to tell if it is feasible.

As far as extending your signal to the outside, if your wireless supports the use of swapping antennas install a larger antenna to increase coverage area.

Yes you can...  Place it order then fill your info and choose Egypt from the pull down list, then fill your payment method.

 

Edit: Check the screenshot:

attachicon.gifsamplefororder.jpg

I have just paid to buy the Belkin N300 router and Access point.So, I have no available budget right now for a switch

 

simple fix try another Chanel or you might be on busy one

um i live in a condo and the amount of wifi is ridicules but i work around it

lots of wifi analyzers out there.

 

I don't have too much networks, actually one or 2 max.

Maybe your channel have some interference. Use inSSIDer to find the best channel.

I tried it and changes channel, but in vain

 

Wireless signal travels up better than down. I live in a bi-level house and when I put my wireless on the second floor the signal on the first is very weak to non existent, but when I put the wireless on the first floor just about all of the second floor is covered.

When you use a repeater, you want to put the repeater where you get strong signal from the wap, you don't want it in an area where the signal is weak or at 50% . I would rather see a hard wire run from your router to another wap but you are the only one to be able to tell if it is feasible.

As far as extending your signal to the outside, if your wireless supports the use of swapping antennas install a larger antenna to increase coverage area.

 

ADSL router is hoocked to line in the 3rd floor.Ican't change that.I direct the two antenna downward.

 

 

When you use a repeater, you want to put the repeater where you get strong signal from the wap, you don't want it in an area where the signal is weak or at 50% . I would rather see a hard wire run from your router to another wap but you are the only one to be able to tell if it is feasible.

 

I put the repeater where signal is at least 70%. I don't understand the hard wire thing!!!!!

 

 

As far as extending your signal to the outside, if your wireless supports the use of swapping antennas install a larger antenna to increase coverage area.

That, I can do.I have two detachable antennae.I will swap one with a stronger antenna.

move the devices around.  That is the best that you are going to be able to do with the resources available without purchasing new items.  This is what is known as being stuck between a rock and a hard place.  When you have exhausted location and frequency of the devices the only other option would be to purchase something.  I can tell you that with antennas you can increase range significantly, I can tell you putting in more waps would increase range as well.  Your goal is to increase range.  There isn't any more that you are going to be able to do without purchasing other than moving the devices around to get the coverage in the areas you want.

I have just paid to buy the Belkin N300 router and Access point.So, I have no available budget right now for a switch

 

If you just bought it like a week ago or two.. which you have up to 30 days before return...depends the return policy in your area. you can take it back and get a new one.. 

 

Belkin products suck.   You can try swap the antenna but I doubt they will help.

 

Ask Santa that you get Amped Wireless router for Christmas.... never hurt to try.

You do realize swapping with the right antenna apparatus could increase the range to miles vs feet, right? They have done this with crappy b routers and g routers you would buy at a store...spanning up to 50 miles, granted that is a directional beam vs omni directional, but it still impressive with a Soho router.

If you just bought it like a week ago or two.. which you have up to 30 days before return...depends the return policy in your area. you can take it back and get a new one.. 

 

Belkin products suck.   You can try swap the antenna but I doubt they will help.

 

Ask Santa that you get Amped Wireless router for Christmas.... never hurt to try.

 

Unfortunately, I am past the return time, so I am stuck with both of them

You do realize swapping with the right antenna apparatus could increase the range to miles vs feet, right? They have done this with crappy b routers and g routers you would buy at a store...spanning up to 50 miles, granted that is a directional beam vs omni directional, but it still impressive with a Soho router.

 

This is news to me, I will try to get a new stronger antenna.But which parameter should be bigger/stronger?

This topic is now closed to further replies.
  • Posts

    • Microsoft updates Visual Studio Code with chat cost tracking and multi-agent chats by Paul Hill Microsoft has just launched Visual Studio Code 1.126, its latest weekly release. This time, the company has focused on letting you see the total cost of chat sessions to spot expensive conversations; enabling multiple chats per session that run side-by-side in one agent host Copilot session; and letting you browse new folders safely in restricted mode. We have now reached the stage where free AI in IDEs is coming to an end. To help you keep track of your costs, VS Code now lets you see the entire cost of a chat session, rather than just individual turns. This should give you more transparency about which sessions consume the most credits, so you can better manage your usage over time and spend less. For those of you using the Agents window, you know it is possible to run and manage multiple agent sessions at once. In this update, a Copilot session started from an agent host can hold several chats at once. Explaining how this feature works, Microsoft writes: Finally, from this update forward, Microsoft will remove the pop-up when opening an untrusted folder. When you open a new folder now, it will automatically open in Restricted Mode. You will see a banner that lets you manage the trust level of the folder. Microsoft has made this change so that it’s easier to start inspecting code without giving it trust right away. If you have VS Code, you can check for updates within the app now to get this new version. Otherwise, you can download it from the Visual Studio Code website.
    • Anthropic accuses Alibaba of using 25,000 fake accounts to copy Claude's capabilities by Karthik Mudaliar Anthropic has accused Alibaba of using nearly 25,000 fraudulent accounts to extract capabilities from Claude on a huge scale. According to a report from Reuters, Anthropic told US lawmakers that operators linked to Alibaba and the company’s Qwen AI team generated 28.8 million exchanges with Claude between April 22 and June 5, 2026. That is a lot of Claude conversations, but Anthropic says this was not ordinary chatbot use. The company believes the accounts were part of a coordinated effort to collect answers that could help train or improve rival AI systems. The alleged campaign reportedly focused on some of Claude’s most valuable skills, including software development, multi-step reasoning, and agentic tasks. In practical terms, that means getting an AI model to plan and complete work across several stages rather than simply answering a single question. This is called 'distillation,' where AI companies use outputs from a larger model to train a smaller and cheaper one. The smaller model learns to imitate useful parts of the more capable system without needing the same amount of computing power. The distillation process isn't automatically suspicious, but the problem comes when one company gathers another provider's outputs without permission and at an industrial scale. Also, this does not mean Alibaba obtained Claude’s source code, model weights, or original training data. Instead, Anthropic claims the accounts repeatedly asked Claude carefully designed questions and collected the answers. Those answers could then be used as training material for another model. Anthropic has made similar accusations against DeepSeek, Moonshot AI, and MiniMax earlier this year. As Neowin previously reported, Anthropic said those three companies collectively generated more than 16 million Claude exchanges through roughly 24,000 accounts. Anthropic says the new campaign produced almost twice as many exchanges in a matter of weeks. Anthropic reportedly told lawmakers that the campaign could help Chinese AI developers approach the capabilities of its Mythos Preview model. Mythos is focused on advanced cybersecurity work, including finding and exploiting complex software vulnerabilities. via Reuters | Photo via DepositPhotos.com
    • An Indian manufacturer that assembles roughly one-third of Apple's iPhones and supplies semiconductor components to Tesla confirmed Monday that attackers had stolen and publicly published a 630-gigabyte cache of confidential files — including engineering blueprints stamped "TRADE SECRET," a 52-page quality inspection document for iPhone circuit board components, and cryptographic certificates that security experts say could be weaponized in follow-on attacks. https://www.techtimes.com/articles/319019/20260624/apple-tesla-supplier-tata-electronics-confirms-630-gb-data-theft-iphone-specs-dark-web.htm
    • I don't think it was ever a big question. In fact, I don't think anyone ever asked about how clocks work on Mars.
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      133
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!