Will a Sound Card REALLY Improve Quality?


Recommended Posts

I have a 5/6 year old PC currently being used as my HTPC.

Looks great on the (4 year old) TV I have at the moment, which will be upgrade shortly if I can find the funds.

 

Part of the upgrade will be some Logitech Z906 speakers, which I have just purchased at ?50 less than yesterdays price.  My aging Creative iTrigue 5600 speakers have served me well over the last 6 years but are showing wear and tear.  This got me thinking about optical output and if my PC even has an on-board out socket!  However will optical out from the PC make any difference when each satellite will be connected with the standard cables?

 

Sound cards aren't expensive (I was thinking buy a ?40 or less) but will one really improve the sound I get from the machine?  At the moment it's good but nothing to blow my socks off.  So I am thinking with a dedicated sound card, optical out (from the PC) and the new speakers will increase the quality but I am thinking the gains won't be worth the money.

 

Any ideas or advice?

In my opinion, not really. A dedicated card will be better than a built-in solution for sure, unless you have a high-end motherboard. I could be wrong, but the quality of the sound chip won't matter in this case as you are sending it digitally to a speaker set that has a dedicated audio processor.

Cease all that self-proclaimed audiophile placebo at once. Output quality of optical S/PDIF will not differ between soundcards no matter how much money you shell out. It either works or it doesn't (same with DVI, HDMI etc.). Copper wire digital, yes, ground loop is guaranteed, even if often inaudible. Optical, no, it's impervious to all interference. No, before you object, jitter is complete bogus.

 

In shared mode (recommended for daily work) mixing of streams is done by Windows itself and in exclusive mode (recommended for entertainment) your audio player directly feeds the speakers' DAC, transmitting ones and zeros exactly as they appear in the PCM (or Dolby DTS, if supported) data.

 

The problem might remain with codec (unless it's DTS), resampling (shared mode) and quality of speakers' DAC and amp (always), but optical output is 100% pure.

  • Like 4

Cease all that self-proclaimed audiophile placebo at once. Output quality of optical S/PDIF will not differ between soundcards no matter how much money you shell out. It either works or it doesn't (same with DVI, HDMI etc.).

As far as I understand and I have been wrong more than once.

You are right when it comes to transferring audio from one device to another optical the same as digital, it will not lose any quality and does not do anything with the signal as it is sent digitally.

However, what is done with the sound before it is sent to the output that is also important.

If you have a bad on board or cheap soundcard that muffles the sound, fails badly on the signal-to-noise ratio then the bad sound is just going to be sent when converted to digital to be sent.

That is my understanding anyway.

But in this instance in reply to the original post it would not make much audible difference, unless you convince yourself.

If you are using SPDIF or TOSLINK the quality depends on your receiver, same with HDMI. If you are getting out the audio from the output jack of your computer then IT REALLY depends on your soundcard, motherboard sound is never good, you can try the Creative Z OEM version, which is not that expensive and DOES improve the sound, however the real deal is at external DACs, but they are known to be quite expensive (and they do even a better job than soundcards)

You are talking about audio processing with software incapable of offloading encoding to the audio card like via OpenAL. its the same with graphics, you either get crap graphics rendered on the CPU with low FPS or you have a dedicated card that gives you the performance. My card does dolby DTS on its chip.

 

I'm definitely not. Performance has nothing to do with quality. There's no argument that dedicated solutions offer vastly better *analog* reproduction quality. Usually they do.

Hardware processing, on the other hand, is a fairly valid point. While Windows' own resampler is rather good, any hardware SRC and mixing (and effects - but why would anyone want to use them?) will be even better. But afaik this is available only since Windows 8, is it not?

 

Then there's also ASIO, a step above WASAPI exclusive mode, because it's actually bit-perfect whereas with WASAPI one must take several precautions for it to be so.

 

Now, the problem is with connecting PC to Logitech Z906 amp using optical and then amp to speakers using *unbalanced wiring*, because Z906 doesn't have balanced outputs. *That* is suboptimal... but passable. Still better than if PC were to be connected using any electrical wire.

  • Like 2

 Output quality of optical S/PDIF will not differ between soundcards no matter how much money you shell out. It either works or it doesn't (same with DVI, HDMI etc.).

 

Last time i checked (a while go) most integrated sound card did not support DDL and DTS connect though.

Cease all that self-proclaimed audiophile placebo at once. Output quality of optical S/PDIF will not differ between soundcards no matter how much money you shell out. It either works or it doesn't (same with DVI, HDMI etc.). Copper wire digital, yes, ground loop is guaranteed, even if often inaudible. Optical, no, it's impervious to all interference. No, before you object, jitter is complete bogus.

 

In shared mode (recommended for daily work) mixing of streams is done by Windows itself and in exclusive mode (recommended for entertainment) your audio player directly feeds the speakers' DAC, transmitting ones and zeros exactly as they appear in the PCM (or Dolby DTS, if supported) data.

 

The problem might remain with codec (unless it's DTS), resampling (shared mode) and quality of speakers' DAC and amp (always), but optical output is 100% pure.

 

the problem with that is that you get sound drops, when audio switches, you get beeps and bops and other annoyances, whereas a quality sound card that encodes to DTS Live or the DD equivalent, will take all the windows sounds encode them and send them out. no switching between streams and formats on the amp/receiver and thus no drops, no beeps no bops. 

 

As for quality, from a movie no, from interactive sources, a sound card will give better sound, if it's worth it... eh...

My bad I didn't notice the SPDIF part but, the audio processor of some cards will enhance the quality of the sound even before it becomes analogue.

 

Not really if it's just a passthru i think.

 

I might be wrong i did not use SPDIF output for a while (using HDMI and PowerDVD) but if i remember corectly to get 5.1 via SPDIF from a PC you needed DDL or DTS Connect in most of the cases. If i remember correctly that's why i bought my X-FI prelude a while ago as i could not get the SPDIF output of my onboard sound card to output anything but stereo sound. My memory could be wrong though.

I have an ASUS ROG Xonar Phoebus and yes the quality is significantly better than the onboard realtek 7.1 with all the enhancements.

The other benefit of the ASUS sound cards is that they truly offload audio processing to the audio card which means less CPU utilisation.

Creative have lost the plot with their drivers since the audio stack in windows was re-written back in vista and audio drivers no longer execute in kernel memory space causing performance issue and playback issues (like a scratched CD). They also fail to release compatible audio drivers on time for new versions of Windows.

I'd love to blind test you, I doubt you could tell the difference.

Also, CPU utilisation is a moot point these days. All CPUs are insanely powerful.

i used my Creative X-Fi sound card (the original one) for like 7 years. The sound difference was amazing, but that was at a time when on-board sound was not very good. Upgraded this year and the on-board sound is very good. no need for the old card anymore. plus, i dont think my board even has PCI anymore...

It's still true, but (my subjective opinion) they're both bad ideas anyway.

 

Who cares these days anyway. You can just get a video card with HDMI passhtru and be done with it ;) Unless i'm mistaken most media player softwares will "bitsteam" thru the HDMI port. Anyway using PowerDVD i get dolby sound from the HDMI port of my video card and it sounds really good. But from my own past exp of many years ago DDL was better than the stereo sound the SPDIF output of my onboard sound card gave me. But it was many years ago (probably around 6 or even 7 years ago) so things are probably different today. Back then you did not want to use onboard audio for an HTPC.

Not sure what you mean by this

 

DTS Audio pass-through.

 

 

the problem with that is that you get sound drops, when audio switches, you get beeps and bops and other annoyances, whereas a quality sound card that encodes to DTS Live or the DD equivalent, will take all the windows sounds encode them and send them out. no switching between streams and formats on the amp/receiver and thus no drops, no beeps no bops. 

 

Not sure what you mean by "audio switches". When would that happen? The only single time I do keep hearing such an annoyance is on the Welcome screen when good part of the startup sound gets dropped. As I've come to understand, my speakers need a great deal of time to detect what kind of data I will be sending.

Audio quality depends on all the components in the system (not to mention the source and the environment).

 

If you output to PC type of speakers, it won't be worth it.

 

If you output to an A/V receiver and a real speaker system, then, in this case, certain advantages can be realized like on-the-fly stereo to 5.1 DTS or Dolby conversion (if your current solution doesn't support it already) and a higher sample rate (no downsampling).

 

I've been using ASUS Xonar HDAV 1.3 Deluxe card since 2008 and it has served me really well. Have it paired with a Pioneer Elite A/V receiver and a set of PSB speakers.

DTS Audio pass-through.

 

 

 

Not sure what you mean by "audio switches". When would that happen? The only single time I do keep hearing such an annoyance is on the Welcome screen when good part of the startup sound gets dropped. As I've come to understand, my speakers need a great deal of time to detect what kind of data I will be sending.

 

Watxch a movie with DTS sound. drop out to the MC software menu and if it has nav sounds, they're not going to be DTS or DD and the computer will send another audio stream, causing the receiver to switch and you get sound drop and a pop. sometimes you will get a pop for every nav sounds and the software/windows insist on switching back to DTS or DD all the time.  Same if windows for some reason decides to give you a ding or something in the background. or in any other situation where you can switch between different times of audio streams(more often than you think in a htpc)

I have an ASUS ROG Xonar Phoebus and yes the quality is significantly better than the onboard realtek 7.1 with all the enhancements.

The other benefit of the ASUS sound cards is that they truly offload audio processing to the audio card which means less CPU utilisation.

Creative have lost the plot with their drivers since the audio stack in windows was re-written back in vista and audio drivers no longer execute in kernel memory space causing performance issue and playback issues (like a scratched CD). They also fail to release compatible audio drivers on time for new versions of Windows.

 

I'm using Asus Xonar DX and it sounds better on my speakers then on-board. I do have an inexpensive Logitech 5.1 Speaker System.

I'm connected via standard analogue speaker connector, not optical / digital. 

It also sounded better (to me) compared to the Creative Labs X-Fi titanum I had on there before as well. 

 

You can also test you sound card with this program

http://audio.rightmark.org/index_new.shtml

using a male to male wired connection. 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Qmmp 2.3.3 by Razvan Serea Qmmp (Qt-based MultiMedia Player) is a free, open-source audio player that delivers a classic music listening experience with a modern foundation. Inspired by the legendary Winamp, Qmmp features a familiar, customizable interface that supports both Winamp and XMMS skins, making it instantly recognizable to long-time users. It handles a wide variety of audio formats including MP3, OGG Vorbis, FLAC, WAV, AAC, and many others, ensuring smooth playback across diverse music libraries. In addition to basic playback, Qmmp offers advanced features such as a 10-band equalizer, crossfading, gapless playback, and audio visualization plugins. Users can manage playlists efficiently, create and save multiple lists, and even enable streaming from online sources. Plugin support extends the player’s capabilities, allowing integration of features like lyrics display, ReplayGain, and more. Built with the Qt framework, Qmmp runs smoothly and efficiently, making it ideal even for older systems. 10 great QMMP features you might not know: Global Hotkeys Support – Control playback using customizable system-wide keyboard shortcuts. CUE Sheet Support – Automatically detects and plays tracks from CUE files for full album playback. Last.fm Scrobbling – Integrated support for sending playback data to Last.fm. Audio CD Playback – Play music directly from audio CDs. Command Line Interface – Control Qmmp via command-line options for scripting or automation. System Tray Integration – Minimize to and control playback from the system tray. MPRIS Support – Integration with desktop media player controls via the MPRIS (Media Player Remote Interfacing Specification) interface. Spectrum Analyzer and Oscilloscope – Built-in visualizations for real-time audio feedback. Configurable Notifications – Custom pop-ups for track changes and playback status. Multiple Output Backends – Support for ALSA, PulseAudio, JACK, and more, offering flexible audio routing. Qmmp 2.3.3 changelog: fixed build with PipeWire versions less than 0.3.50; fixed settings dialog layout; fixed default CUE encoding; fixed possible null pointer dereference; fixed tracks order when added using drag and drop (2.3.3 only); fixed uninitialized structure usage; improved sid plugin: added libsidplayfp 3.0 support; added feature to build without residfp engine; fixed memory leak; fixed displaying audio information; updated Japanese translation (2.3.3 only). Download: Qmmp 64-bit | 24.0 MB (Open Source) Download: Qmmp 32-bit | 24.1 MB View: Qmmp Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • BATorrent 3.0.3 is out.
    • The current Statcoungter desktop numbers has Google Chrome increasing it's market share this past year and currently commanding 75% share. Everybody else is just making up the numbers with even MS Edge losing 3% this past year and has dipped just below 10% share which is staggering considering it's default on every Windows deviced purchased. If these numbers are correct that terrible Edge number is both devastating and embarrassing for MS especially when you add in the terribly low Bing market share. This leads me to ask a couple of questions as the default browser holding just less than 10% market share seems really weird. It used to be that all Chromium browsers were being counted as Google Chrome in some cases.  Is this still happening? Do these high Google Chrome numbers contains some Edge user numbers?
    • Yeah, all web browsers seem to have some junk in them these days. The regular Brave browser has a lot of unnecessary stuff in it, similar to Microsoft Edge, so I don't see any benefits of using Brave over Microsoft Edge if you already have Microsoft Edge fully set up with ad blockers and that. The cleanest or best free browser outside of 'Microsoft Edge' I’ve tried so far is 'Samsung Browser'. It has very little bloat and is a nice-looking web browser with an inbuilt 'Ad blocker'. I also really like the web browser called 'Floorp' that is based on Firefox. This browser can also install Chrome extensions. I have a system wide Ad blocking program for Windows 11 that doesn't just blocks ads in the web browser, but over the whole system. I don't really need a web browser with an inbuilt ad blocker because of that.
  • Recent Achievements

    • Rookie
      moog19 went up a rank
      Rookie
    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      491
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      Skyfrog
      75
    4. 4
      Steven P.
      68
    5. 5
      FloatingFatMan
      63
  • Tell a friend

    Love Neowin? Tell a friend!