Recommended Posts

If you are worried about desktop space why not wall mount it? 3m makes double sided tape that does not take the paint with it when you remove it. Or find an area to put you network at and mount it there. Hell, mount it to the side of you desk. No real reason for it to actually sit on your desk other than you really want to look arty it every time you sit at you desk.

The Dark Knight came out about the same time as the Dark Knight movie so i figured that was why but the Nighthawk just came out and i figured there were trying to clone Asus' success as much as possible.

I think the Dark Knight name was dropped when they came out with the white version (ASUS's webpage no longer references the name directly). Also, would the white version be called the White Knight? :-)

Here are some images. I have my AC66U sitting in there and barely fitting. The anthenas are bent all the way, this isn't possible if there is anyhting plugged in. Hence why anthenas are bad. I have tried shifting things around in there but it's the same ****. 

I am about to take out all the coax stuff since it's useless to me (no TV). 

 

As you may see, there is no modem to put in there. it's straight Ethernet coming in. 

 

2w5iy4n.jpg

2zivfxy.jpg

whbq01.jpg

Yup I agree that is a box -- in the back of a closet? Yeah not going to be the best place for a wireless AP/Router to provide coverage ;)

Antennas all crossing over themselves next to cables and metal.. Where are all these 15 connections to other rooms?

"so in mine, I got ~15is cable heads and this coax "switch/spliter"

Most of the cat cables are not going anywhere. There is a splitter there for coax, but I don't see any sort of multiple cat ports.. So that could run to 1 other port, or to a switch?

I would NEVER put my wireless router in there.. Lets not forget temp, some routers/ap can get warm.. Putting them in a closed up box not going to be best for what temps they run at, etc.

So question for you.. Does internet come in on the coax and that under the splitter is your modem, or is coax just for say TV and the internet comes in on cat, and you are just plugging in a wireless router here.

Again I would not put any networking equipment in that box be it wireless or not. Its closed up, no air flow..

Yup I agree that is a box -- in the back of a closet? Yeah not going to be the best place for a wireless AP/Router to provide coverage ;)

Yea it's tucked in there behind my clothing. with a metal plate covering it.... I dont' think they meant for wireless stuff to be put in there. 

Antennas all crossing over themselves next to cables and metal.. Where are all these 15 connections to other rooms?

"so in mine, I got ~15is cable heads and this coax "switch/spliter"

Yea 1 of each cable going to every room. multiple for common areas. they go out towards the top of the picture. 

Most of the cat cables are not going anywhere. There is a splitter there for coax, but I don't see any sort of multiple cat ports.. So that could run to 1 other port, or to a switch?

I would NEVER put my wireless router in there.. Lets not forget temp, some routers/ap can get warm.. Putting them in a closed up box not going to be best for what temps they run at, etc.

I was hoping to leave the door open and have it be fine. but I see your point. this may not be a great idea. 

So question for you.. Does internet come in on the coax and that under the splitter is your modem, or is coax just for say TV and the internet comes in on cat, and you are just plugging in a wireless router here. that's usually how most buildings in seattle are built. Cat3 for older buildings and cat5/e for new buildings. ISPs often use Ethernet and put their switches in the telco closets. 

Again I would not put any networking equipment in that box be it wireless or not. Its closed up, no air flow..

"Yea 1 of each cable going to every room. multiple for common areas. they go out towards the top of the picture. "

Really? Looks like to me those are just cables that don't terminate to anything

post-14624-0-09835300-1390068413.png

See the ends of cat cables just there not going to anything (red boxes around them)

I see what looks like 3 coax going out the top.. But don't really see cat cables other than some ends not connected and 1 in and out of that center of the box (green box around it)

If you think those cat cables out the top (red arrow) go to other rooms in the house -- what are the ends terminated too that that provide ethernet connection (switch/hub). Looks like they are just loose cables to me. You can not just split a cat cable and provide multiple connections like you can with a coax connection your splitter there.

While you can run say cable TV into a splitter and then have a coax connection in multiple rooms in the house.. You can not really do that with ethernet. Your connection would have to go into a network switch, and then sure you could have multiple connections off it. I am not seeing that in this box anywhere to be honest.

Again - IMHO, I would not put any sort of networking equipment in there.. Is there power inside this box even? To plug in your wireless router? I am not seeing any sort of electrical connection inside that box.. Which if designed for equipment you would think would be in there?

"Yea 1 of each cable going to every room. multiple for common areas. they go out towards the top of the picture. "

Really? Looks like to me those are just cables that don't terminate to anything

You see that punch card on the bottom right? The cat5 are usually attached to that thing. I ripped them out and am in the process of putting on those little rj-45 tips on the cables. 

 

You are right about the network switch, I believe it's kind of a bring your own switch situation. (I am quite ignorant of what the punch card thing is). it used to be the "splitter?" but I was told that if I want wired internet in every room, I would need to put a router in there. 

 

Otherwise, I can't think of any way to fire up the other 3 plugs in the apartment. 

 

here is a picture of one of the rj-45 jacks in a public area. I believe that is #4. it does say Voice-4 so maybe that punch card is good for voice applications and I need something more sophisticated for internet? 

 

 

2zi4l7q.jpg

Yeah voice wouldn't use all 8 wires in the connection.. Phone is just 1 twisted pair..

So better check the other end of the jack on the wall - highly unlikely they wired the cable pairs if it was just voice.. And normally if it was "voice" they would of put a rj11 jack on the wall, ie phone not rj-45

Sure if they have cat cable running through your walls, then by all means I would take advantage of using it. But I would not really put the switch in a box in the wall that you close up ;)

Sure if they have cat cable running through your walls, then by all means I would take advantage of using it. But I would not really put the switch in a box in the wall that you close up ;)

They do have Cat5 running through my walls. My router is currently in a different room and the wiring is exactly the same. Those cables I stripped to put tips on have 4 twisted pairs so it's all good. 

 

If you don't recommend I put network equipment in the box, how else can I fire up the rest of the ports?

Putting a piece of electronics that produces heat, be it however so little into a sealed box with no airflow just does not seem like the best of choices to me ;) Can just not put that cover on the box? That would be better.

Putting a piece of electronics that produces heat, be it however so little into a sealed box with no airflow just does not seem like the best of choices to me ;) Can just not put that cover on the box? That would be better.

oh absolutely, that's exactly how I would do it. closet doors are sliding doors so they allow sufficient airflow and are never shut all the way anyways. 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I have a Motorola, one of the lower end ones, it works fine. It is possible to get rid of the Gemini app and also to disable googles assistant , but A.i is still apps. I try to avoid all LLM A.I, is i can, I use no Ai duck duck go.
    • Free Software Foundation Europe pushes EU to force Google to allow AI uninstalls on Android by Paul Hill Credit: Pexels Users should be able to fully uninstall AI-based features from Android devices and be able to access interoperability functions, free from Google’s verification requirements, the European Commission has heard as part of an Android interoperability consultation under the Digital Markets Act. These measures were proposed by the Free Software Foundation Europe (FSFE) last week when it submitted its documentation. The FSFE noted that Google had started silently installing AI models without telling users. It noted that the EU’s DMA requires companies like Google to allow users to uninstall pre-loaded software from their devices, but in the case of the AI models Google is installing, they reinstall if you delete them, contravening the DMA. To get Google back under control, the FSFE has told the European Commission that there needs to be improvements within the Android Open Source Project (AOSP). First, it said that users should be able to fully remove pre-loaded AI components from their devices, with companies being prohibited from silently reinstalling or reactivating them. Second, access to Android interoperability features should not be contingent on registration, authorization, or contractual relationships with Google. This pertains to Google’s attempt to force developers to register with Google, even to publish apps to alternative app stores like F-Droid. Discussing its submission, Lucas Lasota, FSFE Legal Programme Manager, said: Google is planning to roll out its Android Developer Certification in September 2026. This will force every Android app developer to register with Google before their software can be installed on certified Android devices, but it should affect those who have removed Google Apps from their device. The program is controversial because it entails the signing of contracts and payment of account fees to Google, as well as the handing over of the identities of developers. It said: The FSFE said that if the Commission’s draft measures remain unchanged, then Google will be allowed to make developers verify their identity. The FSFE believes that asking developers to register is contrary to the text and spirit of the law. In summary, the FSFE has told the Commission that no developer should need a Google account, a Play Store presence, or any agreement with Google to access Android’s interoperability features.
  • Recent Achievements

    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      188
    3. 3
      PsYcHoKiLLa
      87
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      72
  • Tell a friend

    Love Neowin? Tell a friend!