How much airflow does the Xbox one need?


Recommended Posts

I have a tv stand where the bottom is enclosed in the front and back.

I currently have my blu ray player on one side. Other side has my cable/DVR box.

Bottom has two full sides of blu rays and DVDs. I am thinking of buying a blu ray rack and put the Blu rays there and putting the xbox one whenever I get it in there. I have my xbox slim on top of the stand which it sits lower then my tv which is perfect. However the new one is bigger and taller so I will notice it and it will bug me.

However I don't want it to over heat.

Well if I have read correctly, nowhere near as much as the original 360 used to require however because of the issues in the past I would go for as much as possible. It is a pretty quiet unit so if you hear the fan ramping up then I would suggest it doesn't have enough.

 

I believe there is a safety feature which scales back performance if it starts to reach higher temperatures too.

The heat from the X1 comes mostly from the top, right half, so that area needs the airflow to carry the heat away. Its not as much about space as it is moving air, so having say 3-4 inches clearance all around it would be fine as long as you are not closing it up in the space.

So are saying that space it will be in has a closed back? Is there also a door that will cover the front of that space?

The heat from the X1 comes mostly from the top, right half, so that area needs the airflow to carry the heat away. Its not as much about space as it is moving air, so having say 3-4 inches clearance all around it would be fine as long as you are not closing it up in the space.

So are saying that space it will be in has a closed back? Is there also a door that will cover the front of that space?

Yeah it's enclosed front is a door, and the back is wood.  with a hole for wires.  hmm.  Guess it might just go up top.

What I did to my unit (similar by the sounds of it), is drill some holes at the back for air to escape. This was a 360 (not the newest but one before) And it was fine. I did think about adding a 140mm fan to the back with some kind of power converter so I could plug into mains, but it wasn't needed in the end.

If you're putting it in the same space you might have had a 360 in before which ran without issue then the XB1 will run just fine in it, though it might need more room to fit smoothly.  

Yeah it's enclosed front is a door, and the back is wood.  with a hole for wires.  hmm.  Guess it might just go up top.

Well what are the dimensions of the space?

If its small and enclosed, I would hesitate putting the X1 or any console in there. If its a rather large space, I might feel better. Luckily, my setup has doors but with an open back, so I can hide it away and still not worry.

If it was me in that situation, I would rather put it somewhere else vs putting it in a space that is enclosed and offers no airflow if possible.

If you're putting it in the same space you might have had a 360 in before which ran without issue then the XB1 will run just fine in it, though it might need more room to fit smoothly.

That's a good point. If it worked fine for the 360 it will certainly be fine for the X1

Well what are the dimensions of the space?

If its small and enclosed, I would hesitate putting the X1 or any console in there. If its a rather large space, I might feel better. Luckily, my setup has doors but with an open back, so I can hide it away and still not worry.

If it was me in that situation, I would rather put it somewhere else vs putting it in a space that is enclosed and offers no airflow if possible.

That's a good point. If it worked fine for the 360 it will certainly be fine for the X1

I would say if I set it on the bottom shelf, it has a 8 inch tall spot and maybe a foot sideways?  Maybe a foot an a half. then maybe 3 to 4 inches left in the back I'll have to measure it exactly.  

 

Hello,

Id remove the blu ray player. No point to it right?

Later, Id just destroy the back and make it open (or at least drill more holes to make it a bit more open). Makes no sense to have a closed back.

My blu ray player is connected to all my speakers for my home theater.   I cut probably cut some holes. 

 

If you're putting it in the same space you might have had a 360 in before which ran without issue then the XB1 will run just fine in it, though it might need more room to fit smoothly.  

The 360 sits ontop of the stand, so it doesn't have issues. 

I would say if I set it on the bottom shelf, it has a 8 inch tall spot and maybe a foot sideways?  Maybe a foot an a half. then maybe 3 to 4 inches left in the back I'll have to measure it exactly.

Hmm, well that is actually a nice amount of space around the console. The back doesn't need as much since the console doesn't vent much that way.

Well it wouldn't hurt anything to try it out in there. The key is to keep a close eye on it. Check the temp in the space after playing for a bit, maybe 30 minutes and then again an hour later. If the space feel pretty warm or hot, I would be concerned that its not allowing the console to move cool air across the hardware. If the space is room temp or cool, then it seems fine.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • These features described above are good, but far from what developers will like the most. The main feature that developers will care and love the most it's called "Bring Your Own Models". It gives us the ability to connect to LOCAL AI models running on Ollama. The feature it's located on GitHub Copilot tab -> On the model picker where you can select "manage models" instead of paid models and then it will show you the "Bring your own models" window where you can now select Ollama and the endpoint of your local server. So if you have a beefy spec machine you can now use your own model 100% local inside Visual Studio 2026 18.7.0
    • Microsoft Teams is getting a controversial location tracking feature that users may hate by Usama Jawad Image generated with Microsoft Copilot Earlier this year, Microsoft planned to roll out a controversial location tracking feature in Teams, but following customer feedback, it decided to delay its release. The bad news is that the company has decided to launch it later this year, but it's based on roughly the same design that was shared earlier, which means that many users still have good reason to worry. Basically, Microsoft Places and Teams have received workplace check-ins via Wi-Fi. The idea is that if an employee arrives at the office and connects to their enterprise network, their profile status indicator will show them as being present in the office. For example, if you arrive at work, open Teams on your PC, and connect to the "Studio B" company Wi-Fi network, your Teams profile will indicate that you are present in "Studio B", as shown below: Microsoft says that this feature is basically a replacement for physical workplace check-in peripherals, it reduces the need to manually update your status, and it also enables co-workers to know that you're at work so that they can coordinate in-person meetings with you. IT admins can enable this workplace check-in capability at a tenant level, and users have the ability to control whether they want to enable it or not. Of course, all of that sounds great on paper, but naturally, many Teams customers may still have concerns, as they did before. This is because it enables your reporting manager and other members of the organization to track if you are at the office, when you arrive at the office, and where you are right now. This could be problematic for people who work in what they consider to be flexible work environments or hybrid setups, and this kind of location tracking could be considered an invasion of privacy. Microsoft has tried to alleviate some of these concerns by letting users know that they can manually set their location easily, which essentially overrides workplace check-in if they feel uncomfortable with it. However, that doesn't really solve the problem because your organization could enforce a workplace policy that mandates that this feature remains enabled. The Redmond tech giant has also assured users that this capability does not store historical data and is only a real-time indicator of location. Finally, it only generates a signal when you connect to a corporate network, which means that if you are working from home and connect your PC to your personal Wi-Fi, it won't broadcast your location to your employer; you will simply be shown as "Remote". Microsoft has encouraged IT admins to prepare for this change and begin informing users so they know what to expect once it begins rolling out later this year.
    • Wow, Microsoft IS cooking lately... This only shows that they COULD improve, they just chose not to for whatever reasons. That obsession with AI was destroying them from the inside out.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      81
  • Tell a friend

    Love Neowin? Tell a friend!