Recommended Posts

Hello everyone!

 

I recently tried to format one of my HDD's. I did it with the manager in windows. Using fast format option it went thou, but while I selected full format, the drive started to scratch around 1%-2%. Since previously I had corrupted or more so unacceptable files on the drive. I did a S.M.A.R.T check and the drive failed it. Now I removed the drive, but I would like to use the drive, coz it's a 1.5GB drive and only about 30GB on the drive is bad/unacceptable. Is there any option to fix this error? Or how can I "reserve" these sectors so the drive doesn't goes there any more?

 

Thanks for helping.

You could run an error check, using Windows.

 

Check the box to 'repair' bad sectors.

 

You could try using Spinrite.

 

But a drive that damaged, I would just rescue what data you can, then toss it.

 

If the heads are scratching the disks, it is toast.

post-37120-0-75380000-1390032760.png

If it is truly scratching, then it is toast.  I assume by 1.5GB you meant 1.5TB
 

If it is scratching, then the control arm is digging grooves and spreading shrapnel all over the platters.

Why do you want to keep this thing ?   t.


Hardware errors are usually the thing that kills a drive.  You can get the drive rebuilt possibly by a data recovery place.

There they take the drive apart in a clean room, dip the platters in a liquid that brings out the tiny grooves, then use good hardware to rebuild it.  It cost about $1000 - since you are sweating a $65 drive, I think $1000 is probably out of your budget.

 

Hum is correct in suggesting CHKDSK/R and SpinRite 6.0 - they are very good at what they do.  But they cant do anything for failing hardware.

  On 18/01/2014 at 08:14, He said:

I had some damage to sectors on an old 30Gb drive, I successfully used the tool, HDD regenerator to "repair" the damage, and got a few months extra use from it.

But once its scratching its prolly best to acquire a new HDD

 

But I'm definitely going to try this. I hope it will do something.

 

  On 18/01/2014 at 08:17, Hum said:

^ Windows Tools -- right click on the bad drive, Properties, Tools, Error checking ... see picture above. ^

 

Oh, sry, didn't see the picture. Well, now it's completely blank drive, so no error's are found.

 

Btw, it only scratches when I try to access those bad sectors. Not generaly.

post-121358-0-29629100-1390034467.png

Are hard drives more expensive than gold in Hungary ?  I simply dont understand why you are wasting 5 seconds on this.  You know its failing, you cant trust anything you put on there - why mess with it ?

If you say "well Im only 14 and too young to work, and my parents wont help" then I understand.

  On 18/01/2014 at 08:00, Class said:

Hello everyone!

 

I recently tried to format one of my HDD's. I did it with the manager in windows. Using fast format option it went thou, but while I selected full format, the drive started to scratch around 1%-2%. Since previously I had corrupted or more so unacceptable files on the drive. I did a S.M.A.R.T check and the drive failed it.

 

 

Don't fiddle with it, get a new drive and trash this one as it is a goner. S.M.A.R.T. error are meant to tell you the drive is dying and needs to be replaced. Trying to fix it will only increase usage a lot and expedite the pending failure.

Copy the data to another HDD before trying to fix this! You are after all trying to use it while the platters are getting scratched constantly. The only reason it's still running and you're able to access the data is because it is a 1.5 TB HDD; your stuff is all over those platters.

 

Just get a new HDD.

So the drive has been having issues for 3 years? How come you didn't run the makers diag tools the day it started doing it.. If the drive had problems while under warranty you could of gotten replacement.

What specific disk is this, Seagate, Western Digital, Toshiba, etc. And we can point you to where to get the makers tools to test the drive.

Example here is seagate tools

http://www.seagate.com/support/downloads/item/seatools-win-master/

http://www.seagate.com/support/downloads/item/seatools-dos-master/

Dos version you can boot from a CD and test, etc.

If you would of run this test before the warranty was up and it fails, you could of replaced. Make sure you run the long version of the test, etc. What specific smart info is reporting bad?

If the drive is showing signs of failure "clicking for example" Yeah get your data off you can that you need if any, and get a new disk..

Smart failed and makes noise... I'd throw it away.  

 

There was a person I worked with who would bring home all the "smart failed" drives that didn't make bad noises or were "repaired' by manufacturer tools.  He used them in an unraid server (nearly 15 drives in all) and they've been going strong for a few years now.  He keeps adding failed drives to it and he has never had any issues.  Not sure how he bypasses the SMART Failure warning, but he does.  Not sure you can disable it on the drive, might be able to disable it in bios on the computer you're using.

This topic is now closed to further replies.
  • Posts

    • KDE brings Wayland PiP to Plasma 6.5, adds finishing touches to 6.4 as release nears by David Uzondu The KDE team has released its This Week in Plasma update, showing the final polish being applied to Plasma 6.4 ahead of its June 17 release. Last week, the KDE team brought performance upgrades, and this week the team is continuing that with improvements like faster loading for System Monitor components in Plasma 6.4. Future work for Plasma 6.5 is already underway, and it includes a feature that many have probably been waiting for: proper Picture-in-Picture support on Wayland. This uses an experimental version of the Wayland PiP protocol, which means applications like Firefox that also implement it can finally display PiP windows correctly. It is a long-overdue addition that moves the Wayland session closer to feature parity with X11. The devs also merged KWin's Background Contrast effect into the Blur effect. Virtual desktops can now be re-ordered from the Pager widget, a feature previously missing. Invert and Zoom settings have been moved into the Accessibility page, which is a more sensible place for them than the Desktop Effects page was. The team also brought consistency to the Breeze application style, with animated effects for checkboxes and radio buttons now working in QtQuick-based apps. Other small cleanups include standardizing the section headers in the Disks & Devices, Networks, and Bluetooth widgets. For those who do a lot of screen recording, Spectacle now makes it much clearer how to stop a recording, both in its notifications and shortcut names. As for the immediate future, Plasma 6.4 and its first point release are getting accessibility and user interface tweaks. The team improved text contrast for labels used in secondary roles throughout Plasma, making things like brightness indicators much easier to read. The Kicker Application Menu in 6.4 can now scroll horizontally when a search returns a ton of results, so you can actually see all of them. The team also delivered some stability improvements in Plasma 6.4.0, most notably fixing a long-standing issue where adding widgets to oversized panels could freeze the entire shell. Discover also got a much-needed fix for a crash that occurred when suggesting replacements for unsupported Flatpak apps. On the usability side, dragging files into a Folder View widget no longer causes glitchy visuals, and Open and Save dialogs from Flatpak-based browsers now properly allow the preview pane to open. Printing from Flatpak GTK apps now respects correct sizing, and installing or removing apps no longer wipes out your search input in Kicker or Kickoff while you're using it. Other notable fixes include: Selection rectangles on the desktop now render properly when using custom fonts or sizes (Plasma 6.3.6) A crash in System Monitor charts used by apps and Plasma components has been resolved (Frameworks 6.15) Switching process views in System Monitor no longer causes crashes (Frameworks 6.16) Open and Save dialogs no longer close when hovering over specific files (Frameworks 6.16) A thumbnailer crash on X11 caused by certain widget styles has been fixed (KDE Gear 25.04.3) Frameworks 6.15 also speeds up System Monitor by delaying tree view arrow loading There are still 3 high-priority Plasma bugs holding out, and the list of quick-win "15-minute bugs" has grown to 23.
    • Hasleo Backup Suite Free 5.4.2.0 by Razvan Serea Hasleo Backup Suite Free is a free Windows backup and restore software, which embeds backup, restore and cloning features, it is designed for Windows operating system users and can be used on both Windows PCs and Servers. The backup and restore feature of Hasleo Backup Suite can help you back up and restore the Windows operating systems, disks, partitions and files (folders) to protect the security of your Windows operating system and personal data. The cloning feature of Hasleo Backup Suite can help you migrate Windows to another disk, or easily upgrade a disk to an SSD or a larger capacity disk. System Backup & Restore / Disk/Partition Backup & Restore Backup Windows operating system and boot-related partitions, including user settings, drivers and applications installed in these partitions, which ensures that you can quickly restore your Windows operating system once it crashes. Viruses, power failure, or other unknown reasons may cause data loss, so it is a good habit to regularly back up the drive that stores important files, you can at least recover lost files from the backup image files in the event of a disaster. System Clone / Disk Clone / Partition Clone Migrate the Windows operating system from one disk to another SSD or larger disk without reinstalling Windows, applications and drivers. Clone entire disk to another disk and ensure that the contents of the source disk and the destination disk are exactly the same. Clone a partition completely to the specified location on the current disk or another disk and ensure that the data will not be changed. File Backup & Restore Back up specified files(folders) instead of the entire drive to another location to protect your data, so you can quickly restore files(folders) from the backup image files when needed. Incremental/Differential/Full Backup Different backup modes are supported, you can flexibly choose data protection schemes, which can improve backup performance and save storage space while ensuring data security. Delta Restore Delta restore uses advanced delta detection technology to check the changed blocks on the destination drive and restore only the changed blocks, so it has a faster restore speed than the traditional full restore. Universal Restore This feature can help us restore the Windows operating system to computers with different hardware and ensure that Windows can work normally without any hardware compatibility issues. Hasleo Backup Suite 5.4.2.0 changelog: Added backup image delete feature Added storage path management feature Improved file backup feature Show application notifications in Windows Notification Center Various other bug fixes and feature improvements Download: Hasleo Backup Suite 5.4.2.0 | 34.4 MB (Freeware) Links: Hasleo Backup Suite Website | Hasleo Backup Suite Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Fresh leak suggests OnePlus Pad Lite in the works, key specs revealed by Sagar Naresh Bhavsar OnePlus recently unveiled the mid-range OnePlus 13s and the OnePlus Pad 3 Android tablet in India (the tablet is also coming to the U.S.). Now, it appears that the company is working on another tablet, this time, a budget model called the OnePlus Pad Lite. Supposedly, it will be the successor to the OnePlus Pad Go, which launched in the U.K., India, and European countries. According to the leaked images, OnePlus Pad Lite follows the same design elements as earlier OnePlus tablets. The tablet is shown to have a circular camera at the center of the rear panel, with the logo sitting in the middle. The USB-C port and speaker grills are located on the right side frame of the tablet. The alleged OnePlus Pad Lite measures 254.9 x 166.5 x 7.4mm and weighs 539 grams, which is slightly taller, wider, and thinner, but weighs less compared to the OnePlus Pad Go. The tablet, courtesy of 91Mobiles and OnLeaks, is displayed in blue, which could be the only color option. One image shows the tablet with a cover that doubles as a kickstand, but may be sold separately. Gallery: OnePlus Pad Lite Based on the leaked specs, the OnePlus Pad Lite could feature an 11-inch LCD 1920x1080 resolution 90Hz display. It could be powered by the MediaTek Helio G100 processor and paired with the Mali G57 GPU. The tablet may come with 6GB of RAM and 128GB of onboard storage, with more storage and RAM options available at launch. Reportedly, the OnePlus Pad Lite could feature a 5MP primary camera and a 5MP selfie camera. Under the hood, it could be juiced by a 9,340 mAh battery. On the software side, OnePlus Pad Lite may come with OxygenOS 15.0.1 based on Android 15 out of the box. There is no clarity on which market OnePlus plans to launch the OnePlus Pad Lite in. However, the report suggests that it could be priced under ₹20,000 (roughly $231). Images by 91mobiles x OnLeaks
  • Recent Achievements

    • One Month Later
      5i3zi1 earned a badge
      One Month Later
    • Week One Done
      5i3zi1 earned a badge
      Week One Done
    • Week One Done
      julien02 earned a badge
      Week One Done
    • One Year In
      Drewidian1 earned a badge
      One Year In
    • Explorer
      Case_f went up a rank
      Explorer
  • Popular Contributors

    1. 1
      +primortal
      544
    2. 2
      ATLien_0
      227
    3. 3
      +FloatingFatMan
      160
    4. 4
      Michael Scrip
      113
    5. 5
      +Edouard
      102
  • Tell a friend

    Love Neowin? Tell a friend!