Recommended Posts

Hello everyone!

 

I recently tried to format one of my HDD's. I did it with the manager in windows. Using fast format option it went thou, but while I selected full format, the drive started to scratch around 1%-2%. Since previously I had corrupted or more so unacceptable files on the drive. I did a S.M.A.R.T check and the drive failed it. Now I removed the drive, but I would like to use the drive, coz it's a 1.5GB drive and only about 30GB on the drive is bad/unacceptable. Is there any option to fix this error? Or how can I "reserve" these sectors so the drive doesn't goes there any more?

 

Thanks for helping.

You could run an error check, using Windows.

 

Check the box to 'repair' bad sectors.

 

You could try using Spinrite.

 

But a drive that damaged, I would just rescue what data you can, then toss it.

 

If the heads are scratching the disks, it is toast.

post-37120-0-75380000-1390032760.png

If it is truly scratching, then it is toast.  I assume by 1.5GB you meant 1.5TB
 

If it is scratching, then the control arm is digging grooves and spreading shrapnel all over the platters.

Why do you want to keep this thing ?   t.


Hardware errors are usually the thing that kills a drive.  You can get the drive rebuilt possibly by a data recovery place.

There they take the drive apart in a clean room, dip the platters in a liquid that brings out the tiny grooves, then use good hardware to rebuild it.  It cost about $1000 - since you are sweating a $65 drive, I think $1000 is probably out of your budget.

 

Hum is correct in suggesting CHKDSK/R and SpinRite 6.0 - they are very good at what they do.  But they cant do anything for failing hardware.

  On 18/01/2014 at 08:14, He said:

I had some damage to sectors on an old 30Gb drive, I successfully used the tool, HDD regenerator to "repair" the damage, and got a few months extra use from it.

But once its scratching its prolly best to acquire a new HDD

 

But I'm definitely going to try this. I hope it will do something.

 

  On 18/01/2014 at 08:17, Hum said:

^ Windows Tools -- right click on the bad drive, Properties, Tools, Error checking ... see picture above. ^

 

Oh, sry, didn't see the picture. Well, now it's completely blank drive, so no error's are found.

 

Btw, it only scratches when I try to access those bad sectors. Not generaly.

post-121358-0-29629100-1390034467.png

Are hard drives more expensive than gold in Hungary ?  I simply dont understand why you are wasting 5 seconds on this.  You know its failing, you cant trust anything you put on there - why mess with it ?

If you say "well Im only 14 and too young to work, and my parents wont help" then I understand.

  On 18/01/2014 at 08:00, Class said:

Hello everyone!

 

I recently tried to format one of my HDD's. I did it with the manager in windows. Using fast format option it went thou, but while I selected full format, the drive started to scratch around 1%-2%. Since previously I had corrupted or more so unacceptable files on the drive. I did a S.M.A.R.T check and the drive failed it.

 

 

Don't fiddle with it, get a new drive and trash this one as it is a goner. S.M.A.R.T. error are meant to tell you the drive is dying and needs to be replaced. Trying to fix it will only increase usage a lot and expedite the pending failure.

Copy the data to another HDD before trying to fix this! You are after all trying to use it while the platters are getting scratched constantly. The only reason it's still running and you're able to access the data is because it is a 1.5 TB HDD; your stuff is all over those platters.

 

Just get a new HDD.

So the drive has been having issues for 3 years? How come you didn't run the makers diag tools the day it started doing it.. If the drive had problems while under warranty you could of gotten replacement.

What specific disk is this, Seagate, Western Digital, Toshiba, etc. And we can point you to where to get the makers tools to test the drive.

Example here is seagate tools

http://www.seagate.com/support/downloads/item/seatools-win-master/

http://www.seagate.com/support/downloads/item/seatools-dos-master/

Dos version you can boot from a CD and test, etc.

If you would of run this test before the warranty was up and it fails, you could of replaced. Make sure you run the long version of the test, etc. What specific smart info is reporting bad?

If the drive is showing signs of failure "clicking for example" Yeah get your data off you can that you need if any, and get a new disk..

Smart failed and makes noise... I'd throw it away.  

 

There was a person I worked with who would bring home all the "smart failed" drives that didn't make bad noises or were "repaired' by manufacturer tools.  He used them in an unraid server (nearly 15 drives in all) and they've been going strong for a few years now.  He keeps adding failed drives to it and he has never had any issues.  Not sure how he bypasses the SMART Failure warning, but he does.  Not sure you can disable it on the drive, might be able to disable it in bios on the computer you're using.

This topic is now closed to further replies.
  • Posts

    • Apple: lets take our inspiration from Windows 7/Vista and call it innovative
    • Nice! My $100 refurbished iPad 8 that I bought last year for a small project (and still runs like new cuz it's been mostly in storage the past several months) will get this v26 upgrade. I'm definitely gonna scope out OS26 on this device before upgrading my also-supported refurbished iPhone SE 3rd Gen (only got it for the 5G UW support).
    • Hello, The separate discussion about VLC has been moved to its own thread at  Regards, Aryeh Goretsky  
    • Hello, I am guessing this is the result of using a third-party tweaking tool instead of changing things within Windows settings. Windows 11 has a decent set of configuration options for the display, but they tend to be scattered throughout the operating system due to fragmentation of product ownership/inconsistent standards being applied by Microsoft. There are a few places in Windows 11 where you can modify the various display settings in order to get them to your liking: Under Settings → System → Display you can stroll down to the Scale & layout section and change the Scale and Display resolution settings to whatever you prefer.  For the Scale option, you can click on the text box to choose between the various pre-populated settings.  If none of those are exactly what you are looking for, click on the caret ("") caret to open the Custom scaling setting (also available under Settings → Display → Custom scaling).  I would recommend this as an option of last resort as this can cause display issues in various programs. I strongly recommend using the screen's native Display resolution here; it should show up as the "(Recommended)" resolution.  If it does not, you may need to install your monitor's profile information file (basically, a device driver for your monitor) to get the correct setting. Another place to look at making changes to fonts is under Accessiblity → Text size.  There is a slider bar for changing the text size from 100% to 225% there. You can try making changes to the ClearType settings.  It's a little bit finer-grained than the others, but it may make the text easier to view on the display.  Run the ClearType Text Tuner (filename: CTTUNE.EXE) and go through the wizard. You may want to do this several times under different lighting conditions or times of the day to figure out what works best for you overall. Lastly, you may want to look into using a dedicated assistive screen technology program from a third-party.  Microsoft provides a Screen Magnifier and a Narrator for text-to-speech, but they provide only basic functionality, and you may find that a third-party program works a lot better.  The pros of this is that third-party assistive technology programs tend to work quite well under Windows; Microsoft has historically worked closely with third-party developers of assistive technologies.  The cons of this are that such tools tend to be on the expensive side, since they are often sold to schools, businesses, or paid for by insurance companies, not individuals. Regards, Aryeh Goretsky  
    • Totally agree with you. I think people, especially on tech sites, need to realize that they’re the minority. Microsoft isn’t going to waste time on things that, in the big picture, don’t matter to the majority.
  • Recent Achievements

    • Dedicated
      MadMung0 earned a badge
      Dedicated
    • Rookie
      CHUNWEI went up a rank
      Rookie
    • Enthusiast
      the420kid went up a rank
      Enthusiast
    • Conversation Starter
      NeoToad777 earned a badge
      Conversation Starter
    • Week One Done
      VicByrd earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      267
    3. 3
      +FloatingFatMan
      257
    4. 4
      Edouard
      203
    5. 5
      snowy owl
      178
  • Tell a friend

    Love Neowin? Tell a friend!