8800 GTX is dying + couple other questions


Recommended Posts

I need a suitable replacement for my now faulty 8800gtx. I have this power supply:

http://www.newegg.com/Product/Product.aspx?Item=N82E16817151027

 

My other system specs include:

q6600

2gb ddr some corsair ram

GIGABYTE - Motherboard - Socket 775 - GA-P35-DS3L

 

 

I can currently boot into safemode, but I can see artifacts since BIOS, if I manage to boot into normal mode it just hangs. I removed completely the video card and I can hear boot up into normal mode without an issue, which is why I nailed it down to the video card.  The card runs perfectly fine in safemode, but this is pretty useless to me.  So which card would be on par with the 8800gtx AND run on my current system?

 

Also is buying more ddr2 be worth it at the current price ratio that DDR2 is at?

 

I don't want to buy a whole new system  up until october this year, so I just need to keep this one up and running for the time being.

 

Edit: Also please make any recommendations from amazon.com as this would be internationally  shipped. (And amazon accepts international credit cards).

You're looking to replace a former hi-end. Something that keeps up with it is probably going to be more expensive than expected despite whole 6 years having passed since G80.

 

An R7 250 or GTX 650 (non-Ti, non-Boost) would be a safe bet - both mid-range "not quite there" cards, pretty much alike (unless you mine guppycoins, then go for Radeon *cough*)

 

Or if you're inclined towards GeForce for any reason, you could probably invest in a superior card already (your PSU allows for, say, GTX 760, although you'll have to use Molex-to-PEG adapters). You'll bottleneck it terribly, but it will fit and run - PCI-Express is backwards compatible (mostly; in very rare cases it won't "take"). Litecoin miners are currently making shortages of high-end Radeons, so that might be worse choice.

 

To additional memory stick - unless you really feel running out of RAM all the time (say - it's paging all the time and hammering your HDD to hell), I'd wait out.

Amd R7 250

 

You're looking to replace a former hi-end. Something that keeps up with it is probably going to be more expensive than expected despite whole 6 years having passed since G80.

 

An R7 250 or GTX 650 (non-Ti, non-Boost) would be a safe bet - both mid-range "not quite there" cards, pretty much alike (unless you mine guppycoins, then go for Radeon *cough*)

 

To additional memory stick - unless you really feel running out of RAM all the time (say - it's paging all the time and hammering your HDD to hell), I'd wait out.

The ATI HD7790 seems to be on par performance wise and  has less thermal dissipation.

 

http://www.amazon.com/PowerColor-DisplayPort-PCI-Express-AX7790-1GBD5-DH/dp/B00C5916O8/ref=sr_1_1?ie=UTF8&qid=1390342171&sr=8-1&keywords=ati+hd+7790

 

And the AMD 260X seems to be on par as well:

 

http://www.amazon.com/XFX-RADEON-1075MHz-Graphics-R7260XCNF4/dp/B00FUR6FJ8/ref=sr_1_4?s=electronics&ie=UTF8&qid=1390342837&sr=1-4&keywords=amd+260

 

http://www.amazon.com/Gigabyte-GDDR5-2GB-2xDVI-Graphics-GV-R726XOC-2GD/dp/B00FONIOB0/ref=sr_1_6?s=electronics&ie=UTF8&qid=1390342837&sr=1-6&keywords=amd+260

 

But how can I find out if my PS has the juice and/or required connector for it ? As both the cards above are missing any 6 pin connectors from what I can see?

Why Don't you just get a cheap GFX card for now to tied you over until you get a new PC in October When Windows 9 is ready...

 

I found this on Newegg.com SAPPHIRE Radeon HD 6570 2GB DDR3 PCI Express 2.1x16 HDCP Ready Video Card for $64.99 which is a bargain of a price. and it will tied you over until October. I checked your MB to make sure it had PCIE and it does. For nearly $65.00 you can't go wrong.

Ok, what I'm about to recommend is RISKY!!!!

 

I have a 9800GT on my Home file server, and yes before anyone start's screaming I know it's overkill for something that manly does DNLA, Folder sharing and P2P.

 

Every 5 or 6 months i have to do this procedure for the last 2 years:

 

 

But hey only ? I spend are maybe 5 or 6 ? a year on thermal paste.

 

 

Works perfectly fine everytime and YEP IT'S A NVIDIA UNIVERSAL PROBLEM ON THE 8***/9*** GENERATION.

 

 

It's up to you to try and see if it fixes the problem.

 

By the way everytime my girlfriend watches me put the card on the oven she screams "It's Pizza time with a smell of burn electronics" :laugh:

Can't go just by numbers alone. Several architectures have come since G80 and often for the better, GCN taking the lead in that aspect.

 

But, of course, 260X is quite a letdown. In fact, whole Volcanic series seems like a letdown to me. If you see 7790 for a decent price, go for it.

 

Now, R7 250 and GTX 650 do *not* have any power connectors. They have up to 65W TDP each and so can happily live off the mainboard's power alone.

 

Higher cards have the same 6-pin thing. It hasn't changed. In most pictures they're not visible - they used to be at the back of PCBs, but now are on the front side. If you ask me, often unwieldy and often ugly, too, but hey...

 

And yes, your PSU will have enough power. Your old G80 used to eat up to 150W. New midrange cards do not exceed it. See my edit - using Molex adapters you can even run 200W card on that thing and that's high-end already. Power supply calculators are evil.

  • Like 1

To echo what others have said, priority number 1 is the PSU. Irregardless of its wattage rating, that PSU is probably at least 5 years old, if not more. Capacitors age and have less capacity than new. If not for supporting the rest of your system, plus your new GPU, do it for the safety of the rest of your perfectly working hardware.

2 GB is too minimal these days. I have a very similar mobo (and identical CPU, for that matter) and I think these things can take up to 8 GB which is plenty - 4 GB at minimum. Seeing the trend of computing these days, there's still plenty of life left in this setup so long as you aren't playing any super intensive games, or are penny pinching on your electricity bill ;)

As for the GPU. I replaced my 8800 GT with a 670 GTX in mid 2012 and things have been butter smooth. Moreso since I threw a SSD in there. I'm willing to bet your card, like mine, has micro cracks in the solder somewhere on the board that is causing these artifacts.

  • Like 1

I don't think the seasonic is going to have degraded to the point where a he'd need a replacement. Capacitor aging happens with high heat more than anything else (or just shotty caps). Corsair has a nice breakdown: http://www.corsair.com/us/blog/capacitor/

 

Also, I noticed his PSU has a MTBF of ~11 years if operated under full load in ambient conditions of 25C (room temperature). So, he should be fine based on those estimates.

  • Like 2

Get a cheap ass GFX and wait until you got more money to make a complete and better replacement; if you buy a high end card now by the time you have more money to invest on better CPU, SSD, RAM and such that card will be old; still capable, but not current gen.

 

Also October is not that far.

I don't think the seasonic is going to have degraded to the point where a he'd need a replacement. Capacitor aging happens with high heat more than anything else (or just shotty caps). Corsair has a nice breakdown: http://www.corsair.com/us/blog/capacitor/

 

Also, I noticed his PSU has a MTBF of ~11 years if operated under full load in ambient conditions of 25C (room temperature). So, he should be fine based on those estimates.

Interesting article. (Y) I replaced my 5-year-old Enermax 485W PSU at the 5.5 year mark in spring of 2011, believing the PSU to not be able to take in future upgrades without failing. Didn't realize until now that this particular PSU also has a ~11 year MTBF (100000 hours). Explains why it's powering a scaled down HTPC build just fine right now. :laugh:

  • Like 1

Ok, what I'm about to recommend is RISKY!!!!

 

I have a 9800GT on my Home file server, and yes before anyone start's screaming I know it's overkill for something that manly does DNLA, Folder sharing and P2P.

 

Every 5 or 6 months i have to do this procedure for the last 2 years:

 

 

But hey only ? I spend are maybe 5 or 6 ? a year on thermal paste.

 

 

Works perfectly fine everytime and YEP IT'S A NVIDIA UNIVERSAL PROBLEM ON THE 8***/9*** GENERATION.

 

 

It's up to you to try and see if it fixes the problem.

 

By the way everytime my girlfriend watches me put the card on the oven she screams "It's Pizza time with a smell of burn electronics" :laugh:

Yeah I need my current safemode card to last me until I get the replacement here. Afraid I might over cook it! might do it afterwards

 

Why Don't you just get a cheap GFX card for now to tied you over until you get a new PC in October When Windows 9 is ready...

 

I found this on Newegg.com SAPPHIRE Radeon HD 6570 2GB DDR3 PCI Express 2.1x16 HDCP Ready Video Card for $64.99 which is a bargain of a price. and it will tied you over until October. I checked your MB to make sure it had PCIE and it does. For nearly $65.00 you can't go wrong.

Well I want to match the performance of the 8800 gtx as  I don't want to lose my mind not being able to play games at least decently.

 

 

Can't go just by numbers alone. Several architectures have come since G80 and often for the better, GCN taking the lead in that aspect.

 

But, of course, 260X is quite a letdown. In fact, whole Volcanic series seems like a letdown to me. If you see 7790 for a decent price, go for it.

 

Now, R7 250 and GTX 650 do *not* have any power connectors. They have up to 65W TDP each and so can happily live off the mainboard's power alone.

 

Higher cards have the same 6-pin thing. It hasn't changed. In most pictures they're not visible - they used to be at the back of PCBs, but now are on the front side. If you ask me, often unwieldy and often ugly, too, but hey...

 

And yes, your PSU will have enough power. Your old G80 used to eat up to 150W. New midrange cards do not exceed it. See my edit - using Molex adapters you can even run 200W card on that thing and that's high-end already. Power supply calculators are evil.

What had me thinking was that higher end these days have 8 pin + 6 pin connectors.. 

Also forgot to add my main issue with ram, was editing large photos in lightroom, it just eats up ram and hangs the system, but it's not something I do on a daily basis so I guess I can live with it, since ddr2 is not as cheap anymore

 

 

I don't think the seasonic is going to have degraded to the point where a he'd need a replacement. Capacitor aging happens with high heat more than anything else (or just shotty caps). Corsair has a nice breakdown: http://www.corsair.com/us/blog/capacitor/

 

Also, I noticed his PSU has a MTBF of ~11 years if operated under full load in ambient conditions of 25C (room temperature). So, he should be fine based on those estimates.

 

 

Get a cheap ass GFX and wait until you got more money to make a complete and better replacement; if you buy a high end card now by the time you have more money to invest on better CPU, SSD, RAM and such that card will be old; still capable, but not current gen.

 

Also October is not that far.

Not looking to buy high end just something that matches performance without breaking the bank.

Also, slightly off topic and kind of beating a dead horse. How come I see artifacts from POST, won't boot into normal mode (win7) but safe mode + networking works like a charm?

 

 

To echo what others have said, priority number 1 is the PSU. Irregardless of its wattage rating, that PSU is probably at least 5 years old, if not more. Capacitors age and have less capacity than new. If not for supporting the rest of your system, plus your new GPU, do it for the safety of the rest of your perfectly working hardware. 2 GB is too minimal these days. I have a very similar mobo (and identical CPU, for that matter) and I think these things can take up to 8 GB which is plenty - 4 GB at minimum. Seeing the trend of computing these days, there's still plenty of life left in this setup so long as you aren't playing any super intensive games, or are penny pinching on your electricity bill  ;) As for the GPU. I replaced my 8800 GT with a 670 GTX in mid 2012 and things have been butter smooth. Moreso since I threw a SSD in there. I'm willing to bet your card, like mine, has micro cracks in the solder somewhere on the board that is causing these artifacts.

Problem is DDR2 is about the same price of ddr3, eg. 8gb cost around $70. What would benefit me more the SSD or more RAM?

 

Also, slightly off topic and kind of beating a dead horse. How come I see artifacts from POST, won't boot into normal mode (win7) but safe mode + networking works like a charm?

 

It will eventually happen, it just means you're half the way to almost unworkable.

 

On safe mode most things are turned off, and resolution is lower. (it will eventually look bad in safemode, some resolutions are less prone to show bad picture and the CPU is doing most of the work).

Alrighty then! Even if it does run not so cool, you're not going to feel it anyway as your old card was vastly more inefficient. I think Asus DirectCU version isn't using AMD reference design for PCB either, so they've just might have fixed layout of stuff or something.

 

Happy gaming (or whatever is that you'll be doing with it) :)

  • Like 1

Alrighty then! Even if it does run not so cool, you're not going to feel it anyway as your old card was vastly more inefficient. I think Asus DirectCU version isn't using AMD reference design for PCB either, so they've just might have fixed layout of stuff or something.

 

Happy gaming (or whatever is that you'll be doing with it) :)

Yeah, if I closed my room during the summer I could feel it warm up slightly :laugh:

Also, had not idea about the directCU stuff, cool beans!

DirectCU II is a dual-fan design - one standard, one using Asus' 'CoolTech' design - boasting a large heatsink connected to a single large 10mm heatpipe and numerous - although unspecified - smaller heatpipes. A VRM heatsink is also included, while the board itself enjoys non-reference power components including Digi+ voltage regulator modules using the company's Super Alloy Power (SAP) technology.

 

Card should be here by next week (friday or sat), since it is couriered to where I live :p I'll post as soon as I get it going.

 

 

Also:

 

This card works very nicely and has great cooling with the fans Asus placed on it. Don't forget to attach your 6 pin from your Power Supply.

 

 

It does use 6 pin connector! edit: nevermind you were talking about the  250  :wacko:

 

Also, slightly off topic and kind of beating a dead horse. How come I see artifacts from POST, won't boot into normal mode (win7) but safe mode + networking works like a charm?

 

Because in safe mode the GFX isn't using most of it (low VESA resolution, doesn't get hot and so on) so it can work...until it dies for good. I've had a dying GFX that had those same symptoms: only worked in safe mode and even then for only a small amount of time until it gone ape ######.

Because in safe mode the GFX isn't using most of it (low VESA resolution, doesn't get hot and so on) so it can work...until it dies for good. I've had a dying GFX that had those same symptoms: only worked in safe mode and even then for only a small amount of time until it gone ape ****.

That makes sense. As long as it lasts me to next friday, i'm good :P

This topic is now closed to further replies.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!