Recommended Posts

So i've started having issues with my controllers where they don't sync with the PS3 until i connect them using a USB cable. They're ok after i unplug the cable but whenever i next turn on my PS3 again i still get the same problem.

 

It doesn't seem like a bluetooth issue because if i get one controller working using the above method then the other two sync straight away without even having to connect them by USB.

 

I tried the pin reset buttons on the back of the controllers and even going into safe mode and restoring the file system (it did say it was corrupt and would be rebuilt) but now i'm out of ideas as to what to do. Can anyone help?

Link to comment
https://www.neowin.net/forum/topic/1198785-ps3-controller-sync-issue/
Share on other sites

  On 30/01/2014 at 20:57, red. said:

So i've started having issues with my controllers where they don't sync with the PS3 until i connect them using a USB cable. They're ok after i unplug the cable but whenever i next turn on my PS3 again i still get the same problem.

 

It doesn't seem like a bluetooth issue because if i get one controller working using the above method then the other two sync straight away without even having to connect them by USB.

 

I tried the pin reset buttons on the back of the controllers and even going into safe mode and restoring the file system (it did say it was corrupt and would be rebuilt) but now i'm out of ideas as to what to do. Can anyone help?

 

Are they defaulting to the same number when you try to sync them without the USB cable?

  On 30/01/2014 at 21:14, D. S. said:

Are they defaulting to the same number when you try to sync them without the USB cable?

 

Whenever i press the PS button while the PS3 is on standby, it will turn the console on like normal bit the controller lights will just keep flashing and not sync from then on.

  On 30/01/2014 at 21:31, red. said:

Whenever i press the PS button while the PS3 is on standby, it will turn the console on like normal bit the controller lights will just keep flashing and not sync from then on.

 

Are they all assigned different numbers in Accessory settings? What happens if you press the PS button again while the lights keep flashing? No effect?

  On 30/01/2014 at 20:57, red. said:

So i've started having issues with my controllers where they don't sync with the PS3 until i connect them using a USB cable. They're ok after i unplug the cable but whenever i next turn on my PS3 again i still get the same problem.

 

It doesn't seem like a bluetooth issue because if i get one controller working using the above method then the other two sync straight away without even having to connect them by USB.

 

I tried the pin reset buttons on the back of the controllers and even going into safe mode and restoring the file system (it did say it was corrupt and would be rebuilt) but now i'm out of ideas as to what to do. Can anyone help?

 

I bought 3x supposedly broken PS3 controllers off of eBay recently and 2/3 of them (older model DS3) had similar issues to this with my PS3 (CECHC04).

Here's what fixed it for me:

  • Turn on PS3 via power button
  • Plug in PS3 controllers via USB simultaneously (I had 4x DS3 on 4 separate USB cables for mine)
  • Turn them on, one by one
  • Let them charge for a moment each
  • Power down each controller in turn via holding the PS button, select turn off controller
  • Shut down PS3
  • Test each controller
  On 30/01/2014 at 21:34, D. S. said:

Are they all assigned different numbers in Accessory settings? What happens if you press the PS button again while the lights keep flashing? No effect?

I haven't checked the settings with all controllers plugged in. If I press the PS button while USB is plugged in then it successfully syncs but if not plugged in then it continues to flash all 4 lights.

  On 30/01/2014 at 21:49, Aergan said:

<p>

I bought 3x supposedly broken PS3 controllers off of eBay recently and 2/3 of them (older model DS3) had similar issues to this with my PS3 (CECHC04).

Here's what fixed it for me:

  • Turn on PS3 via power button
  • Plug in PS3 controllers via USB simultaneously (I had 4x DS3 on 4 separate USB cables for mine)
  • Turn them on, one by one
  • Let them charge for a moment each
  • Power down each controller in turn via holding the PS button, select turn off controller
  • Shut down PS3
  • Test each controller

Thanks. I'll try this tomorrow. I got fed up and gave up for tonight.

  On 30/01/2014 at 21:49, Aergan said:

 

I bought 3x supposedly broken PS3 controllers off of eBay recently and 2/3 of them (older model DS3) had similar issues to this with my PS3 (CECHC04).

Here's what fixed it for me:

  • Turn on PS3 via power button
  • Plug in PS3 controllers via USB simultaneously (I had 4x DS3 on 4 separate USB cables for mine)
  • Turn them on, one by one
  • Let them charge for a moment each
  • Power down each controller in turn via holding the PS button, select turn off controller
  • Shut down PS3
  • Test each controller

 

 

Just a quick question, how were you able to plug all the controllers in at the same time? As far as i can see the super slim only has 2 USB ports.

Try deregistering them, then one by one, plug them back into the ps3 via usb one at a time

 

assign a position for it (ie controller 1)

then use the ps button on the controller to turn off the ps3.......... after everything turns off, try turning on the ps3 via the ps button on the controller

 

once that's done, assign your subsequent controllers, and once all controllers are registered to the console, turn off again from the ps button from any controller this is important as mine used to do that too

the only fix I found that worked for me was to do this, it'll re assign controllers, nothing you can do about that, but it should then turn off and then back on from any of the controllers 


  On 31/01/2014 at 08:52, red. said:

Just a quick question, how were you able to plug all the controllers in at the same time? As far as i can see the super slim only has 2 USB ports.

on any ps3 that isn't gen 1 60 gig, you can't, (unless using a usb hub) the only way is to leave them on, and lets the console decide how it's going to handle them (I believe)

 

Hope this helps :)

Tried everything posted and nothing worked :( Strangely if i go into safe mode the controllers sync fine, when it boots normally it doesn't.

 

Also, when i go to repair the filesystem, it keeps saying it's corrupt and needs fixing. I've done it twice and it doesn't seem to be changing.

  On 31/01/2014 at 20:48, red. said:

Tried everything posted and nothing worked :( Strangely if i go into safe mode the controllers sync fine, when it boots normally it doesn't.

 

Also, when i go to repair the filesystem, it keeps saying it's corrupt and needs fixing. I've done it twice and it doesn't seem to be changing.

Sounds like the controllers might not be your issue, do you have a suitable flash drive to download the latest firmware from the sony website to reformat the console?

and back stuff up etc...?

  On 03/02/2014 at 11:03, red. said:

Strangely, without me doing anything, the controllers are syncing again. Not sure what's changed but just as suddenly as it stopped working it's now working again. :s

 

Gremlinelectricql8.jpg

  On 01/02/2014 at 09:56, red. said:

I do, I was hoping avoid backup and formatting as I have a lot of stuff on the hard drive and the Super slim doesn't seem to be able to pick up my USB powered external hard drive.

(I feel your pain bro, and when my slim does, it for no reason restarts the hard drive's spoolup process for no reason)

This topic is now closed to further replies.
  • Posts

    • I think you forgot there's a ugly huge bar carved in the top of the screen.
    • There won't be any major changes from beta to release.
    • Having been using Windows for 30 years and 3 Surface Pros in the meantime (4,6,9) and recently bought a 15" macbook air m4. The OS is indeed a big deal. Hardware wise the surface pro feels as nice as macbook air, but Windows...man it's it's own enemy now
    • 2013 to 2017...wtf, is Steve on the wacky tabacky? Never heard of this or this Nathan guy in Australia.
    • Dell says it can't be blamed for Windows Night Light breaking on its Arm PCs by Usama Jawad Night Light is a very handy feature that is available by default in Windows 10 and Windows 11. Essentially, when you toggle it on, Windows reduces the emission of blue light from the display which in turn decreases the stress on eyes and can potentially aid in better sleep too. While this feature generally works quite well, this hasn't been the case so far on some Dell PCs. Now, Dell has acknowledged the issue in a recently published support document. As the situation currently stands, Night Light does not work on the secondary display on certain Windows Arm PCs when an external monitor is connected to them. This happens on the following PC models: Inspiron 14 5441 Inspiron 14 Plus 7441 Latitude 5455 Latitude 7455 XPS 13 9345 Now, Dell has confirmed that this is not due to any hardware or software issue on its side, it's just a limitation of the Qualcomm Oryon chipset. In essence, this is a problem that is outside the control of Dell. What this means is that while customers can utilize built-in and third-party tools to adjust the color profiles of their displays, Dell can't really get Windows Night Light to work as-is on external displays connected to any of the Arm PCs listed above. The company has emphasized that there are no plans to support Windows Night Light on its existing Arm PCs, and that customers will just have to make do with what they have. However, this feature will likely work as designed with the "next generation" of Arm computers, which will presumably leverage a chipset that is not held back by this limitation. Windows on Arm has enjoyed decent support from software developers in recent times; Microsoft will be hoping that it can keep the momentum going with its next Snapdragon PCs.
  • Recent Achievements

    • Week One Done
      moojay67 earned a badge
      Week One Done
    • Dedicated
      lethalman earned a badge
      Dedicated
    • Week One Done
      B4dM1k3 earned a badge
      Week One Done
    • One Month Later
      adnan.hebibovic earned a badge
      One Month Later
    • Week One Done
      adnan.hebibovic earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      595
    2. 2
      ATLien_0
      219
    3. 3
      Michael Scrip
      198
    4. 4
      +FloatingFatMan
      144
    5. 5
      Xenon
      135
  • Tell a friend

    Love Neowin? Tell a friend!