32GB RAM being maxed out and page file going crazy on SSD; Get a dedicated HDD?


Recommended Posts

Hello,

A PC with 32GB of RAM is getting maxed out so we are upgrading to 64GB. Besides that (and right now) the Windows page file is being killed on the SSD. Besides the RAM, I was thinking of getting a HDD dedicated for the page file. Any drive 100GB would do as long as it is decent and fast (might go with a Raptor).

Good idea?

The question is what are you doing to max out 32GB RAM?

 

Putting the page file on a dedicated hard drive will help performance and save wear and tear on your SSD though

  • Like 2

The question is what are you doing to max out 32GB RAM?

 

Putting the page file on a dedicated hard drive will help performance and save wear and tear on your SSD though

I've always kept my page file on the SSD as that's the C: and is where Windows 8.1 is installed.

 

Should I move the page file to one of my secondary 7,200 RPM HDDs? :s

I've always kept my page file on the SSD as that's the C: and is where Windows 8.1 is installed.

 

Should I move the page file to one of my secondary 7,200 RPM HDDs? :s

It helps if you are maxing out your memory as it will be quicker to access on its on dedicated HDD, otherwise I would leave it be.

Why not just upgrade the RAM further (to 64GB) if your motherboard supports it? Paging really slows down performance.

 

And once again, what exactly is eating up all your RAM?

I would love to know what is maxing out your RAM as I do heavy 3D graphics and comp work in Nuke and im lucky to hit 12GB even when rendering. 
So yeah, what the hell are you running to max out 32GB exactly!?!

Hello,

The question is what are you doing to max out 32GB RAM?

Wow 32GB!

 

I have 8GB in my laptop and always use around 60% ish but that kind of use is insane for a PC? Is it running virtual machines or something?

And once again, what exactly is eating up all your RAM?

So yeah, what the hell are you running to max out 32GB exactly!?!

http://www.solidworks.com/sw/products/simulation/packages.htm

Software eats like a fat kid that loves cake.

Do you a WD2500HHTZ is good for this? Should I go for something else? Or, if budget permits it, go something enterprise-wise? (even though the SATA connection might be the bottleneck there, right)

I'd personally just buy a smallish cheap SSD and put the pagefile on there rather than a HDD. If you're paging that much, then the performance of the SSD will help - and if it's a cheap SSD which is there just for a page file, who cares if it dies relatively quickly.

With that much of RAM, is a paging file really necessary? I set a fixed size of 256 MB on systems with 4 GB and above, never had an issue.

Just did some googling based on the software you mentioned, memory will max out no matter how much you put in, especially when doing flow simulations. My advice? put in as much Ram as your mobo allows. A 4TB HD would help too for paging and would speed things up immensely if you need the sims done fast.

Hello,

LOL - Gonna have to use that.

Not mine. Heard it in a song. 

 

I'd personally just buy a smallish cheap SSD and put the pagefile on there rather than a HDD. If you're paging that much, then the performance of the SSD will help - and if it's a cheap SSD which is there just for a page file, who cares if it dies relatively quickly.

But a small cheap SSD with max out quickly and then what? Will it stop opening programs? Will it use the HDD as a SECOND page file? 

 

With that much of RAM, is a paging file really necessary? I set a fixed size of 256 MB on systems with 4 GB and above, never had an issue.

Yup. Like I said, the page file on the SSD is currently 40GB and growing... 

 

Just did some googling based on the software you mentioned, memory will max out no matter how much you put in, especially when doing flow simulations. My advice? put in as much Ram as your mobo allows. A 4TB HD would help too for paging and would speed things up immensely if you need the sims done fast.

So biggest cheapest no name HDD or or a 10000RPM? Im not leaning towards getting another SSD

Id go the no name, yes the SSD will be faster for I/O, but at the end of the day it wont matter, because your storing information to it, it will only get read when its completed the render of your sim. I only suggest a 4TB for HDD as that should be more than enough for even your most complex simulations, and using it as ure page file drive you can set that number to the size of the drive itself. So in essense, you would have a 4TB RAM drive. 

I have a similar setup for my 3D/Nuke stuff. 
32GB RAM
120GB SSD windows/programs
120GB SSD pagefile
2TB HDD data/movies/tvshows/porn 

Basically I got 152GB ram :) 

 

Hello,

Id go the no name, yes the SSD will be faster for I/O, but at the end of the day it wont matter, because your storing information to it, it will only get read when its completed the render of your sim. I only suggest a 4TB for HDD as that should be more than enough for even your most complex simulations, and using it as ure page file drive you can set that number to the size of the drive itself. So in essense, you would have a 4TB RAM drive. 

I have a similar setup for my 3D/Nuke stuff. 

32GB RAM

120GB SSD windows/programs

120GB SSD pagefile

2TB HDD data/movies/tvshows/porn 

Basically I got 152GB ram :)

But you use a SSD? First you recommend a normal 7200 HDD and you yourself use a SSD; Just in case you got confused.

I was thinking between the lowest sized 10000RPM HDD raptor drive and a regular 300GBish 7200 HDD drives. I wasnt thinking of anything huge.

Not sure what to do.

Hello,

But you use a SSD? First you recommend a normal 7200 HDD and you yourself use a SSD; Just in case you got confused.

I was thinking between the lowest sized 10000RPM HDD raptor drive and a regular 300GBish 7200 HDD drives. I wasnt thinking of anything huge.

Not sure what to do.

http://www.newegg.com/Product/Product.aspx?Item=N82E168221485

 

We have 4 of these in our server at work and they work admirably. We are running retail software with 3 terminal thin clients. It runs a huge customer and inventory sql database. 

But a small cheap SSD with max out quickly and then what? Will it stop opening programs? Will it use the HDD as a SECOND page file?

By small I mean a 128 or so GB one. And unless you're doing crazy stuff, i doubt you'll use 64GB ram and a 128GB page file!

Something like the M500. You can get the 120GB for about ?50, and the 240 for about ?80

Id go the no name, yes the SSD will be faster for I/O, but at the end of the day it wont matter, because your storing information to it, it will only get read when its completed the render of your sim. I only suggest a 4TB for HDD as that should be more than enough for even your most complex simulations, and using it as ure page file drive you can set that number to the size of the drive itself. So in essense, you would have a 4TB RAM drive. 

I have a similar setup for my 3D/Nuke stuff. 

32GB RAM

120GB SSD windows/programs

120GB SSD pagefile

2TB HDD data/movies/tvshows/porn 

Basically I got 152GB ram :)

 

 

 

SSD's run far slower than RAM, so unfortunately no, you don't have 152GB RAM. :P

  • Like 2

Hello,

http://www.newegg.com/Product/Product.aspx?Item=N82E168221485

 

We have 4 of these in our server at work and they work admirably. We are running retail software with 3 terminal thin clients. It runs a huge customer and inventory sql database.

SAS and SATA are compatible right? Just need a adapter for the connector

Ill problably look for a no name 15K HDD.

 

 

By small I mean a 128 or so GB one. And unless you're doing crazy stuff, i doubt you'll use 64GB ram and a 128GB page file!

Something like the M500. You can get the 120GB for about ?50, and the 240 for about ?80

We are currently maxing out 32GB and have a 40GB+ page file....thats 72GB already.

I wouldnt get a brand one (more being a SSD); Id also get a no name brand for the same thing; a SSD as a page file will die. Im scared for this SSD we currently have installed!!!

 

SSD's run far slower than RAM, so unfortunately no, you don't have 152GB RAM. :p

Page file is RAM but slower. :rolleyes: We all understood what he ment.

I use the SSD for my page file as I dont hit more than about 18GB of RAM when doing my 3D stuff. I rarely, if ever, access that SSD. If for whatever reason I do however, it will be a faster read/write than using a standard HDD, and I know id never go over about 64GBs of ram even if doing 3D particle simulations. I just have it there as a 'Just in case'. 

But from what you told us you are constantly maxing out your RAM with your simulations, therefore you would require more space than a cheap SSD provides. See where Im going now? :)

With your 32GB RAM + say a 3TB HDD, your looking at about 3.25TB of RAM, although slowish RAM, but netherless, that would be more than enough for sims I would think.

The page file is not RAM, its simply a place to put pages of memory aside so that it can quickly retrieve it when it needs it. So when memory is full it dumps a chunk it doesn't require instantly to the page file and then when it needs that bit again it dumps another chunk and reads the original one back in.

How much money can you throw at the solution?

 

If you're needing a massive page file, my initial thought is that a HDD isn't the way to go if you also need performance. The read/write times on a hard drive will nuke your processing performance if you start thrashing. If you're looking to mitigate that, I'd recommend picking up a couple of 64GB SSDs and putting them in RAID 0. You'll certainly still suffer I/O blocking, but it'll be much faster than a single HDD, or even a single SSD. SSD wear shouldn't be a big issue. Many SSD's run for longer than most equivalent hard disks would before the write limit is reached.

Never used that packadge, but does it have a memory limit setting anywhere? Most high end software you can say yeah I have 128GB of RAM but you only get to use 64GB of it ever.. we have to do this a lot with SQL Servers because they like to cache anything and everything in RAM... if you set max ram you'd never hit a page file since it would keep it from getting to the point it needed it

 

software like that you should never let eat up more then system memory - 4GB (keep 4GB open for the system that apps cant access) there's an equation to estimate this number... I just picked 4GB because most OS's generally want that amount... SQL server we have something similar to 4GB base for up to 16GB of RAM, each 4GB of system ram over that give .5GB to system reserved... etc..etc.. that's not the real equation we use but it's just an example

Hello,

How much money can you throw at the solution?

Cheapest possible

 

If you're needing a massive page file, my initial thought is that a HDD isn't the way to go if you also need performance. The read/write times on a hard drive will nuke your processing performance if you start thrashing. If you're looking to mitigate that, I'd recommend picking up a couple of 64GB SSDs and putting them in RAID 0. You'll certainly still suffer I/O blocking, but it'll be much faster than a single HDD, or even a single SSD. SSD wear shouldn't be a big issue. Many SSD's run for longer than most equivalent hard disks would before the write limit is reached.

Cost, speed and space. You gotta stop somewhere. If I didnt I would obviously go with the largest SSD in RAID0. But...

A single SanDisk SSD 64 GB I can pick up for about 50? Should I go with that instead of a 300GB+ 7200 or 15000 HDD?

 

 

Never used that packadge, but does it have a memory limit setting anywhere? Most high end software you can say yeah I have 128GB of RAM but you only get to use 64GB of it ever.. we have to do this a lot with SQL Servers because they like to cache anything and everything in RAM... if you set max ram you'd never hit a page file since it would keep it from getting to the point it needed it

 

software like that you should never let eat up more then system memory - 4GB (keep 4GB open for the system that apps cant access) there's an equation to estimate this number... I just picked 4GB because most OS's generally want that amount... SQL server we have something similar to 4GB base for up to 16GB of RAM, each 4GB of system ram over that give .5GB to system reserved... etc..etc.. that's not the real equation we use but it's just an example

Why would I limit the memory? This PC is only and exclusivally used as a terminal server for this program. It does absolutely nothing else. Limiting its RAM would be waste of components/money.

I want to point out that even with 32GB and paging like crazy, performance is still awesome.

BTW, it seems my company has had second thoughts about price to RAM ratio :laugh: We are gonna upgrade it to 40GB (4*8GB (32GB, quad) + 2*4GB (8GB, dual) )

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I heard from a lot of people that driver support for the latest games when RDNA first came out (Radeon 5000 series) was pretty bad, but if you didn't buy the card on day one, or were not trying to play the latest titles, then you were isolated from that issue. Other than that, it's been good and only getting better.
    • Meta launches new AI glasses in 26 styles and Muse Spark multimodal capabilties by Pradeep Viswanathan Meta today announced a new line of Meta Glasses in partnership with EssilorLuxottica. The new AI glasses build on the company’s existing smart glasses portfolio, which is sold under the Ray-Ban Meta and Oakley Meta brands. The new Meta Glasses start at just $299, are compatible with prescription lenses, and will be available in 26 styles across different colors, lenses, and frames. At launch, Meta Glasses will be available in three frame styles. The Meta Adventurer features a clean rectangular design and comes in Standard and Large sizes. The Meta Fury is a bolder frame for users who want a stronger look. Meta Glasses by Kylie is a slim oval frame designed in collaboration with Kylie Jenner. Similar to existing Meta AI Glasses, the new Meta Glasses include a dedicated action button that can be used to quickly access Meta AI or launch a favorite feature. They also feature open-ear speakers for calls, music, and more. Meta has also included a multi-mic array with wind noise reduction for calls and messaging. Users can capture photos and videos hands-free using voice commands. Meta claims more than eight hours of battery life, while the portable charging case can provide up to 40 additional hours. As expected, Meta Glasses come pre-loaded with Meta AI powered by Muse Spark from day one. Muse Spark is the first model from Meta Superintelligence Labs with improved multimodal capabilities. The same Meta AI upgrade is also now available on existing Ray-Ban Meta and Oakley Meta Glasses in the US and Canada via an update. With the Muse Spark-powered AI assistant, Meta AI in the new glasses can provide smarter answers, understand what the user is seeing, and help with daily tasks such as calendar management and navigation. Meta also announced an upcoming feature called the dynamic photo feature, which captures multiple frames and recommends the best one. Pedestrian navigation is also coming soon to these glasses. Meta is also adding support for 14 new live translation languages, including Japanese, Mandarin Chinese, Hindi, and Korean. The new Meta Glasses are available starting today through Meta.com, Best Buy, Amazon, LensCrafters, Sunglass Hut, and select retailers.
    • is that a personal preference? whether it is or isn't, i get where you're coming from. i try to get and use fully open sourced applications whenever i can but there are instances where i find a superior product that is closed sourced. in these cases i do my best to learn about the company, who operates it, their background, parent and sub structure etc. to some extent, depending on "the smell test". i really believe that Syncback is really and truly something great. even if you don't use it, it's always worth a recommendation to someone else, especially if that someone else is not very computer literate. for someone of your calibre you, you'll manage just fine with Syncthing, no doubt about it.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      +Edouard
      166
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!