Recommended Posts

Hi, I am using creative SBLive Value. I just done an upgrade frm Win98 to WinXP. All my devices are detected in the system properties. However when i try to play mp3/audio cds, i could not hear a sound. It seems like the speaker icon has it muting on and off every second. Anyone who got their SBLive value to work?

Pls help me, thanks in advance.

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/
Share on other sites

I downloaded for liveware for win2k from creative website. When i run the setup, it gave the following error msg:

Setup could not detect any Sound Blaster Live! card on your system. Pls ensure that your Sound Blaster Live! hardware is properly installed before running the setup program. Setup will now exit

My PC specs are

AMD Athlon 900mhz

MSI K7T Turbo(No RAID)

Twinmos 256mb sdram

!BM 30 GB harddisk

MSI GeForce2 MX

Creative Sound Blaster Live Value.

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5076
Share on other sites

I done a clean install and i still have the same error message as above: "Setup could not detect any Sound Blaster Live! card on your system. Pls ensure that your Sound Blaster Live! hardware is properly installed before running the setup program. Setup will now exit "

Still no sound in XP.....

My speaker icon at the taskbar is still blinking and off the mute sign.

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5105
Share on other sites

I mention in my previous post that i done a clean install of winXP and done a liveupdate to update my driver. I d/l the win2k driver frm creative website and when i tried to install it gave me the error msg: "Setup could not detect any Sound Blaster Live! card on your system. Pls ensure that your Sound Blaster Live! hardware is properly installed before running the setup program. Setup will now exit".

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5187
Share on other sites

SBLive drivers come with XP. You should not have to download any drivers from SBLive.com. The liveware does not work yet due to that winXP isn't really released to the public so that is right that liveware will not think you have a SBLive card installed. If you need to change volume and what inputs are on and off just go to control panel and find the sounds and audio devices and change your stuff there under advance.

But remember, drivers for win2k are not for XP and until a liveware is released for XP i wouldn't try downloading and installing one for a different platform

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5366
Share on other sites

I got a problem myself with the soundblaster live value also.

Everything works just great. But when I play UT ...the voices break out. It kinda like crackles.

But music and everything else dont work very well.

Anyone else has that problem?

1. Yes fresh install

2. Yes did update

3. Yes reinstall UT

4. NO did not install drivers of soundblaster.

Thanks

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5415
Share on other sites

this is really wierd since i have this exact same card...yet is seems to work fine in XP (i'm running the RTM), except when i'm copying stuff off a CD or summit then it starts crackling.

I did a clean install and the sound card works perfect other than that.

dude, do you have ACPI enabled by any chance........that shitza is the devil! :D

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5432
Share on other sites

I did it yesterday and it work very well for me, now I have AudioHQ for my SBLive!Value, sweet. Maybe some of you will find it helpfull. I left the Microsoft drivers that came with WinXP alone and did as follow:

" WindowsXP How to add in AudioHQ in to WindowsXP.

1: Download the SBLive! 5.1 Series LW Package for Win2k it should be

Date: 010417 17,648,261 bytes

Sound Blaster Live! 5.1SBL5-WEB-W1-US

Save any were you like, run SBL51_W2k.exe it will unpack it self in same folder

move thoses file in to a new folder.

2: Open notepad add the line "sbl51 /w" without quotes save as run.bat in same folder where you put the unpack the drivers & applications at.

A big thank gose to Christopher Hill for the command line switch.

3: Dbl click on run.bat click next then stop rigth there useing the windows key

on key board with the Windows Explorer all ready open you need to go to

?:Documents and Settings(Computer Name)Local SettingsTemp folder copy the

SBL51 folder to c: then exit the installer you need clear out your temp folder

and any sub folder in there then empty Recycle Bin.

4: Go to ?:SBL51AudioEnglishSetup folder then dbl click on

AUDIO.INI scoll down in tell you see the line "WinDrv = 1" change it to

"WinDrv = 0" close notepad and save it.

5: run ?:SBL51AudioEnglishSetupsetup.exe do a custom install

"DO NOT mess with anything" just click next & install.

Everything should now work other then you will not have CL Launcher on top

dran but I live hehe."

Here is a link where I found it: http://shs-sound.paraknowya.com/

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5440
Share on other sites

Originally posted by Pero  

I did it yesterday and it work very well for me, now I have AudioHQ for my SBLive!Value, sweet. Maybe some of you will find it helpfull. I left the Microsoft drivers that came with WinXP alone and did as follow:

" WindowsXP How to add in AudioHQ in to WindowsXP.

1: Download the SBLive! 5.1 Series LW Package for Win2k it should be

Date: 010417 17,648,261 bytes

Sound Blaster Live! 5.1SBL5-WEB-W1-US

Save any were you like, run SBL51_W2k.exe it will unpack it self in same folder

move thoses file in to a new folder.

2: Open notepad add the line "sbl51 /w" without quotes save as run.bat in same folder where you put the unpack the drivers & applications at.

A big thank gose to Christopher Hill for the command line switch.

3: Dbl click on run.bat click next then stop rigth there useing the windows key

on key board with the Windows Explorer all ready open you need to go to

?:Documents and Settings(Computer Name)Local SettingsTemp folder copy the

SBL51 folder to c: then exit the installer you need clear out your temp folder

and any sub folder in there then empty Recycle Bin.

4: Go to ?:SBL51AudioEnglishSetup folder then dbl click on

AUDIO.INI scoll down in tell you see the line "WinDrv = 1" change it to

"WinDrv = 0" close notepad and save it.

5: run ?:SBL51AudioEnglishSetupsetup.exe do a custom install

"DO NOT mess with anything" just click next & install.

Everything should now work other then you will not have CL Launcher on top

dran but I live hehe."

Here is a link where I found it: http://shs-sound.paraknowya.com/

I tried to use that method which i read on the site, however my winxp freezes upon restart, can't even get to the logon screen.

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5649
Share on other sites

Originally posted by Ross D  

this is really wierd since i have this exact same card...yet is seems to work fine in XP (i'm running the RTM), except when i'm copying stuff off a CD or summit then it starts crackling.

I did a clean install and the sound card works perfect other than that.

dude, do you have ACPI enabled by any chance........that shitza is the devil! :D

I do not have any sound in XP, that is even worse. I think i have ACPI enabled. What should i do next? Could be due to IRQ sharing. I can't change my irq of my sound card as the menu/option to change it seems to be grayed out. Do i set my irq for the device manually in the Bios? Please advice. Thank u.

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5650
Share on other sites

you need to change the Hardware Abstraction Layer of the OS.

You can do this by changing the computer type to "Standard PC" instead of ACPI.

once you do this XP will redetect all your devices and assign them all individual IRQs wherever possible :ninja:

Good luck dude :)

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5705
Share on other sites

Originally posted by Ross D  

you need to change the Hardware Abstraction Layer of the OS.

You can do this by changing the computer type to "Standard PC" instead of ACPI.

once you do this XP will redetect all your devices and assign them all individual IRQs wherever possible :ninja:  

Good luck dude :)

May i know what is the difference between Standard PC and ACPI?

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-5804
Share on other sites

This is for Windows XP sound:

Right click on the speaker icon in taskbar.

Adjust Audio Properties.

Under Volume Tab

Device Volume, click Advanced.

Under Play Control - Options - Advanced Controls (Checked).

Hit the Advance Button Under Play Control.

Others Control - (Check) Digital Output Only.

Close.

Link to comment
https://www.neowin.net/forum/topic/1208-no-sound-in-winxp/#findComment-6019
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Dude, im talking about simply disable it from settings app. Because of the eu regulation, you could disable it here for years.
    • One big question about Mars was answered thanks to Einstein's 100 year old theory by Sayan Sen Image via DepositPhotos Scientists at the U.S. National Institute of Standards and Technology (NIST) have calculated how time passes on Mars compared with Earth, adding detail to how timekeeping would need to work beyond Earth’s orbit. The study, published in The Astronomical Journal, found that clocks on Mars run an average of 477 microseconds, or millionths of a second, faster per day than clocks on Earth. A microsecond is one millionth of a second, a very small unit used in precise scientific timing systems such as atomic clocks, which measure time using consistent atomic behavior. This difference is not constant. Because Mars moves around the Sun in a non-circular path (an eccentric orbit, meaning its distance from the Sun changes over time instead of staying fixed) and is affected by gravity from other bodies, the daily difference can vary by as much as 226 microseconds over a Martian year. The study also identifies smaller repeating changes of about 40 microseconds per day linked to synodic cycles (repeating periods that describe how planets line up with each other as they orbit the Sun from different positions). These longer patterns affect how time differences slowly rise and fall. To make these estimates, researchers compared Mars with Earth and the Moon. The work looks at relativistic proper time (the time actually measured by a clock depending on its speed and the strength of gravity where it is located, as described in Einstein’s relativity). This shows that each world has its own slightly different “rate” of time. This becomes more important as space missions expand into cislunar space (the region between Earth and the Moon) and toward Mars. On Earth, time systems rely on atomic clocks and satellites, which stay closely synchronized for navigation and communication. The study is based on Albert Einstein’s theory of relativity, which shows that time is affected by gravity and motion. Stronger gravity makes clocks run slower, while weaker gravity makes them run faster. “The time is just right for the Moon and Mars,” said NIST physicist Bijunath Patla. “This is the closest we have been to realizing the science fiction vision of expanding across the solar system.” A day on Mars is about 40 minutes longer than on Earth, and a Martian year lasts 687 Earth days. But the main question is not just about days and years, but how fast time itself passes. An atomic clock placed on Mars would function normally, but compared with one on Earth, the two would slowly drift apart due to differences in gravity and motion. This requires careful calculation of what is similar to a time-zone difference across planets. Researchers modeled Mars using a reference surface and included gravitational effects from the Sun, Earth, the Moon, and other planets. This includes a multi-body gravitational system (often described as a three-body or four-body problem, where predicting motion becomes difficult because multiple large objects all pull on each other at the same time through gravity). Mars also follows a Keplerian orbit (an idealized elliptical orbit based on simple gravitational laws that assume smooth motion, before adding real-world disturbances from other bodies). In addition, the researchers accounted for solar tides (small changes in gravitational force caused by the Sun that slightly distort planetary motion and timing, especially in systems involving Earth and the Moon). These combined effects are described as relativistic proper-time offsets (small but measurable differences in elapsed time between locations caused by gravity and motion), which must be included when comparing clocks across planets. “But for Mars, that’s not the case. Its distance from the Sun and its eccentric orbit make the variations in time larger. A three-body problem is extremely complicated. Now we’re dealing with four: the Sun, Earth, the Moon and Mars,” Patla explained. “The heavy lifting was more challenging than I initially thought.” Although the differences are extremely small, they matter for navigation and communication systems that depend on precise timing. Even modern networks on Earth, such as mobile systems, rely on timing accuracy at very small fractions of a second. Communication between Earth and Mars currently takes about four to 24 minutes or more depending on planetary positions, meaning signals are not real-time. A shared and accurate time system could help future missions reduce confusion in navigation and data exchange. “If you get synchronization, it will be almost like real-time communication without any loss of information. You don’t have to wait to see what happens,” Patla said. Researchers note that fully developed interplanetary communication networks are still far in the future. However, understanding how time behaves across planets helps prepare for those systems. “It may be decades before the surface of Mars is covered by the tracks of wandering rovers, but it is useful now to study the issues involved in establishing navigation systems on other planets and moons,” said Neil Ashby. “Like current global navigation systems like GPS, these systems will depend on accurate clocks, and the effects on clock rates can be analyzed with the help of Einstein’s general theory of relativity.” Patla added that the results also help improve understanding of time itself under relativity. “It's good to know for the first time what is happening on Mars timewise. Nobody knew that before. It improves our knowledge of the theory itself, the theory of how clocks tick and relativity,” he said. Source: NIST, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • TeraCopy 4.0 Build 26 by Razvan Serea TeraCopy is a compact program designed to copy and move files at the maximum possible speed, also providing you with a lot of features. Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. Pause and resume transfers. Pause copy process at any time to free up system resources and continue with a single click. Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer. Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files. Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual. TeraCopy is free for non-commercial use only. For commercial use you need to buy a license. The paid version of the program includes the following features: Copy/move to your favorite folders. Save reports as HTML and CSV files. Select files with the same extension/folder. Remove the selected files from the copy queue. TeraCopy 4.0 Build 26 changelog: Added support for receiving files via the LocalSend protocol. Improved exception handling and automated bug report upload. Fixed several minor bugs and small memory leaks. Build 26 (June 24) Fixed a rare exception when a transfer completed. Features added since version 3.17: Enhanced speed graph. New multi-threaded copy engine. Support for copying to multiple targets. Queue system for managing multiple copy operations. Support for receiving files via the LocalSend protocol. TeraCopy entry in the modern Windows Explorer context menu. Integrated toolbar in the title bar. Why receive LocalSend transfers with TeraCopy? Handle file conflicts: Skip, overwrite, or rename files when a file with the same name already exists. LocalSend always creates another copy, which can waste time and disk space, especially when resuming an interrupted transfer. Filter unwanted files: Apply ignore lists or remove files manually before accepting a transfer, so unnecessary files are not downloaded. Better performance on fast networks: In tests over a 10 Gbps connection, TeraCopy received files several times faster than the standard LocalSend app on Windows. Download: TeraCopy 4.0 Build 26 | 14.5 MB (Freeware, paid upgrade available) View: TeraCopy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Briefly used Turbo Pascal (and Turbo C++) in 97 and soon after that I bought PC magazine that included a full version of Delphi 2. I still use Delphi today, some 29 years later.
    • Age of Empires Mobile comes to PC, here's how to carry over progress from your phone by Ivan Jenic Image: YouTube/Microsoft Microsoft just released Age of Empires Mobile for PC. The game, officially called Age of Empires Mobile: PC Edition, is available for free on Steam and Microsoft Store, almost two years after its initial release for handheld devices. Age of Empires is one of those franchises that entire generations grew up with. The original came out in 1997, and immediately got people hooked to building civilizations and crushing their enemies on the battlefield. However, the franchise today is a far cry from its roots, as Age of Empires Mobile is, well, a game optimized for handheld devices, and not a classic RTS title we’ve all loved for years. And, of course, it includes in-game purchases. The PC version is still a mobile game at its core, but it’s been optimized for desktop play. There’s mouse control, full keyboard compatibility, and a refined UI. Microsoft also refreshed the visuals with some 4k textures, so the game should look better on larger screens. The game supports Crossplay, so you can switch between your phone, tablet, and PC without losing anything. But linked progress doesn’t come out of the box, as you have to enable it first. Here’s how to link your progress: On your mobile device, open Age of Empires Mobile. Go to Settings (Gear icon) > Account. Select Bind Account and choose a sign-in option. Once you enable account binding, sign in on PC using the same method, and your progress will be accessible across all your devices. Xbox Game Pass subscribers also get a bonus reward pack on PC, which includes: 1 Monthly Pass Token 1 Custom Resource Chest 10 Universal 60-Minute Speed-Ups 1,000 Empire Coins Exclusive Player Portrait Frame You can find more info about Age of Empires Mobile: PC Edition, as well as download links, on the Age of Empires official website.
  • Recent Achievements

    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      458
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!