Are OEM's Giving AMD a bad name?


Recommended Posts

I have an acer w500 tablet an it has an AMD c-50 CPU.. It's not that bad.. For a x86 tablet anyway.but also has a ssd.. For an actual computer it would probably suck.

Err it's a c-50 so it's before E... So it must be slower right?

It's made for win7 but i bought it to test Windows 8 rc on. Looking back on it I was going to try Android x86 on it again last week but it's sooooooooo thick.. I looked at and thought Meh

I'm running a Llano upstairs, a Llano in my brothers laptop, and an A10-7850K in this box.  As long as you know what you're getting AMD is good, the C, Z, and E stuff can be skipped for sure.

 

AM1 stuff as a baseline and current A* stuff should be good.

 

And yes, at least with laptops the OEMs are definitely not helping.

Before I made this thread I had a gateway computer in my office it had a

 

E1-1500 CPU

8GB of ram

Windows 8.1

hardly any crapware

500GB 7200RPM drive.

 

Ran like complete dog ####.

 

I work at a small computer shop much like the one you own i believe.

our basic system comes with:

AMD A4-5300 3.2Ghz Dual Core

4GB DDR3 RAM

500GB Hard Drive

going any lowing with the CPU side normally leaves the customer unhappy

people forget how much they spend a lot quicker than how slow their computer is. i feel its best to try and get them spending a bit more and that way they are more likely to buy their next computer from you because they were happy with their last one.

Hello,

 

this is quite interesting, in another post a few weeks ago i mentioned a similar situation: my mother-in-law bought a new Asus notebook and asked me in install all the software she needs; the laptop was brand new but it was incredible unusual: it was so slow that it was unbearable to do anything at all. I immediately find that weird and started to troubleshoot: high CPU usage, high disk usage, memory wasn't filled to the max but something didn't add up. So after seeing the process that was leaving this brand new notebook in such a state that it was impossible to do anything at all (to put in perspective: the last time i saw such a slow machine it was my good ol' Pentium MMX @ 200 mhz), i figured it out that the the power options was capping the CPU; when i activated the Performance option the CPU high usage stopped, but still the notebook was slow. Then i saw the specs: 5400 RPM HDD, lots of memory - that's good i thought, but then again it was very slow memory - and some Asus software that was running in the background and was consuming CPU and lots of disk access. Also i saw a very big design fault: not a single exhaust vent was underneath the notebook, leaving it incredible hot after a few minutes, just a exhaust for the CPU but clearly it wasn't enough.

 

So i did a last thing: installed a clean Windows 8 version to compare: this time the notebook was more functional but still the same Asus software was the leaving the notebook more slow then it should be. I asked my mother in law to exchange that crap notebook for other one and pay the difference, it's was worthy because one can't have a problematic and slow tool for work, like that notebook was being.

 

Conclusion: I contacted Asus and told them because of their stupidity they lost a costumer: my mother in law because so dissatisfied with this incident that she didn't bought another Asus equipment. So they lost a costumer and gained negativity for their brand, bravo!

 

Now i'm not bashing Asus; it just the low end and cheap notebooks / laptops from ALL the OEMs are severely capped, bad QC and poorly designed, resulting in incidents like this one. And it's the OEM that suffers with this, so i don't get their stupidity: it's better to receive the clients money and give him a poor experience? Contrastingly, the high end Asus stuff is great: I'm posting on a Asus Vivobook, all aluminum and incredible fast and stable, but it wasn't cheap.

going any lowing with the CPU side normally leaves the customer unhappy

people forget how much they spend a lot quicker than how slow their computer is. i feel its best to try and get them spending a bit more and that way they are more likely to buy their next computer from you because they were happy with their last one.

 

 

It's a simple rule of business but i found incredible that many OEMs are so greedy and have such a poor vision that forget the experience the end user is going to get: a poor, enervating and problematic one.

What about the hardware? This could easily be a failing drive that can make a system super slow. I have never had a bad experience with AMD. Not saying I am a fan boy but generally its something else. If the processors defective that could be an issue too.

 

I don't think so, because theres an incredible amount of complaining users; sure not all the HDD are dieing...

it's just poor hardware choces from the OEM: getting a low end CPU tied with crap HDD, RAM and more and the result is crap.

Budget machines cut corners through more parts than the CPU. Expect a slower hard drive, slower RAM, a worse chassis, worse display, crappy battery, slow charger, and more bloatware. These things are everything you'd expect from a netbook, cleverly disguised as a normal laptop. The entire package is designed to be as cheap as possible, resulting in poor performance.

AMD is more competitive/cost-effective in the lower end of performance, and so OEMs typically source hardware configs around these budget processors, resulting in everything being tarred and feathered with the same brush.

  • Like 3

Personally I always figured if people don't know what they're buying before they get it, they should probably not get it.

 

that's what retail clerks exist for! problem is: most of them know jack and sell the biggest POS to count as a sale. :/

I haven't really seen or used any AMD chips in while.  I have a 5400+ BE for several years, but they just can't compete with Intel anymore.  In most cases at least.  Unless you need better integrated graphics, then I'd go AMD.  The new 3740 Atoms run GREAT. 

 

Computers get lower-powered and are technically faster per clock, but they end up being not much faster to the user.  Plus, SSDs just aren't in mainstream laptops, so there just isn't decent performance.  Not to mention all the crap software, malware, greayware, or whatever else is installed.

Computers get lower-powered and are technically faster per clock, but they end up being not much faster to the user.  Plus, SSDs just aren't in mainstream laptops, so there just isn't decent performance.  Not to mention all the crap software, malware, greayware, or whatever else is installed.

An SSD really does give a speed boost. I once reinstalled Windows on a Laptop onto a spare SSD while I was waiting for her new hard drive to arrive from HP. She had to leave for the weekend so I let her take the laptop with the SSD. When she came back, she said, I don't want the HP replacement, Order me one of these solid state drives LOL

AMD's E1 processors really are not meant to be used for anything more than very basic use, same target audience as Atom processors (and they're pretty pants as well)

For all of you complaining about slow OEM computers with bloatware - have you never heard of PC Decrapifier ?

 

People have been saying these OEM's with the AMD E CPU's are slow as crap even on a clean install.

  • Like 3

I personally prefer intel and there is no specific reason to it. I have a laptop with AMD cpu and I don not have any issue with it. I recently purchased a $400 ASUS laptop with pentium 2117U processor and it works fine. I think some of the bottlenecks specially in laptops are coming from 5400 RPM hard drive. No matter how fast your CPU is, if you have slow hard drive then it's going to pull whole system down. It is misconception among the people that if their system is slow, it is because of their CPU. I replaced my laptop with a SSD and now system runs like a horse. Not bad performance for under $400 laptop. 

 

I remember when I purchased my first laptop in year 2004. It was HP with intel pentium 4 processor on it and it cost me around $1800. Then two year later my friend purchased a Toshiba laptop for $1,200 which I though was excellent deal and now I even think $500 laptop is expensive. I guess, I am getting too spoiled by price of laptop coming down. 

  • 1 month later...

Moments ago I was remotely connected to a PC cleaning it up. I'm like.. MAN this computer is running like ball sack (even after I cleaned it up). Checked the CPU ... E2-1800

 

Between GotoAssist, Avast and CCleaner we are using around 89% CPU

 

CCleaner is using 14 - 20%

post-4927-0-28374800-1401291215.jpg

Moments ago I was remotely connected to a PC cleaning it up. I'm like.. MAN this computer is running like ball sack (even after I cleaned it up). Checked the CPU ... E2-1800

That image isn't really relevant considering.  An E2 would be comparable pricewise to older Atoms, not an i3.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This is weird. Mythos is more unrestricted compared to Fable. Technically it poses more risk!!
    • This is a great thing, I always have issues with Verizon while inside of certain football stadiums due to the saturation and walls blocking signal so a LOS way to connect would be great. Verizon was supposed to be offering sat data this year but I've not heard a word of it lately. Dude is sending rockets into space in a cheap manner, low waste foot print and has a great product with solar/battery tech. We would be so far behind China right now if not for him and a push to get back into space.
    • illegally? Proof of that? Seems you are posting misinformation or well a pure straight up lie cause there is zero proof of such a thing. But I get it...
    • KillerPDF 1.6.0 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~15 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.6.0 changelog: A big release: major new features, a full visual refresh, and an internal rewrite. New Tabbed documents - open several PDFs at once, each restoring its page, zoom, and view OCR built into the exe (Tesseract) - OCR a page or dragged region to the clipboard, make a scan searchable, or extract all text; extra languages download on demand Digital signatures with a cloud certificate (Certum SimplySign), reusable signatures, and click-to-sign form fields Transform tool - rotate, scale, flip, and straighten a crooked scan, with live preview Edit existing text by double-clicking a line (the original is cleanly covered) Line tool, refreshed draw/highlight bars, resizable word-wrapping text boxes, and a full RGB color picker with eyedropper Print options (scale, position, margins, two-sided), page-number stamping, folder/.zip import, Document Info (F12), and recent files with file-type icons Translations: Bengali, Turkish, Simplified Chinese, German, French. Changed New logo, icons, fonts, and colors throughout Six themes with per-theme accent colors; sidebar docks left or right; toolbar style picker Internal rewrite: the ~15,000-line main window split into ~40 focused files (no behavior change) Fixed True 300 DPI printing, encrypted/damaged PDFs open on a background thread with a repair fallback, form fields render in every view mode, and undo is one item per press Download: KillerPDF 1.6.0 | 14.6 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      217
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!