Xbox One Power Brick - Loose Cord?

By MrBear5587
in Xbox

 Share

Recommended Posts

Grand Master

MrBear5587

Posted
Posted

Hi people,

 

Just wanted to test the water really.

I've had my Xbox One for a few weeks now, really happy no issues as such. However I noticed when setting it up, that the power cable doesn't really sit firmly into the power brick, in fact it's quite loose. There doesn't appear to be any damage to the inside of the power brick or the cable.

To clarify, the connection on the back of the console is fine, the loose part is the plug on the brick.
Does anyone else have this?

 

Thanks.

  • neoadorable
  • Like 1
Link to comment
https://www.neowin.net/forum/topic/1212643-xbox-one-power-brick-loose-cord/
Share on other sites
Mentor

Tidosho

Posted
Posted

It's probably just the leaf springs inside the kettle lead. The connector on the Xbox One doesn't have an Earth pin for extra snug fit security like a PC, so that's the reason it wiggles a little, the PSU's in the 360 and One use floating point grounds (internal ground circuitry in the PSU) so they don't use the lead's Earth to the mains socket.

 

EDIT: Mine does wiggle up and down a bit but that is definitely cause of the missing Earth, so you're fine, it isn't a defect :) It still takes quite a pull to pull it out.

Grand Master

DrunknMunky Veteran

Posted
  • Veteran
Posted

Hi people,

 

Just wanted to test the water really.

I've had my Xbox One for a few weeks now, really happy no issues as such. However I noticed when setting it up, that the power cable doesn't really sit firmly into the power brick, in fact it's quite loose. There doesn't appear to be any damage to the inside of the power brick or the cable.

To clarify, the connection on the back of the console is fine, the loose part is the plug on the brick.

Does anyone else have this?

 

Thanks.

 

First I've heard of issues with the X1 but it was certainly an issue with some Xbox 360 power bricks. They're supposed to be a tight fit and quite tough to separate.

 

What colour does the LED show?

 

Best to contact MS ASAP before it becomes a bigger problem later. They replaced 360 PSUs but they were quite costly if out of warranty ($150 IIRC?).

Grand Master

neoadorable

Posted
Posted

Hi people,

 

Just wanted to test the water really.

I've had my Xbox One for a few weeks now, really happy no issues as such. However I noticed when setting it up, that the power cable doesn't really sit firmly into the power brick, in fact it's quite loose. There doesn't appear to be any damage to the inside of the power brick or the cable.

To clarify, the connection on the back of the console is fine, the loose part is the plug on the brick.

Does anyone else have this?

 

Thanks.

 

Noticed this as well, it never seems to go all the way in and doesn't feel too secure in there - no perversion intended with that comment. It's normal. As Andrew said, so long as the lights are solid white/orange with no flickering, you're good. The connection to the power brick does feel a little spongy, but many electronics have this. Of course if the prongs are half out and you feel something blocking insertion (hmmm), then call the doctor, i mean MS support. But i think what you have is normal. She's just built that way :blushing:

Veteran

GotBored

Posted
Posted

350x700px-LL-57c5282e_Adaptor.jpeg

 

The plug point should not be loose, that goes for all electronics equipment. But as the power cable is the female plug for the power brick it doesn't become an electrical hazard if it falls off.

But as others have said call MS and start a warranty return for the powerbrick. It is very unlikely but the loose connection could cause more damage to the system.

  • DrunknMunky locked this topic
This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Report: Microsoft to use AWS to help GitHub deal with a major surge in demand

      By +LightEco · Posted

      Who is paying for this 30x scale-up? Its sounds expensive.
    • Millions of users to benefit from Windows 11's new performance boost on Adobe Photoshop

      By hellowalkman · Posted

      Millions of users to benefit from Windows 11's new performance boost on Adobe Photoshop by Sayan Sen Despite the advent of AI-generated imagery, Adobe's Photoshop remains one of the most popular tools on this planet. Adobe does not have a publicly reported total user count but it's probably not wrong to assume there are millions. As of 2025, Adobe Creative Cloud has had approximately 41 million paid subscribers, many of whom likely use Photoshop. In addition, more than 166,000 companies worldwide are apparently also using the app. These figures are according to a very recent report by SQ Magazine. Out of them, it is fair to assume that many are probably running Windows. As such, there is good news for these users as Microsoft has announced Photoshop is getting a big 20% performance boost on x86-64 (AMD64) systems and a 13% bump-up on Arm devices. This is definitely great news for them as many have complained about the slow performance and general sluggishness of Photoshop on Windows 11 ever since the advent of the latter back in 2021. If you are wondering how Microsoft managed to do this, the answer lies in a combination of compiler-level optimizations and a technology called Sample Profile Guided Optimization (SPGO). According to Microsoft, Adobe worked closely with the company’s Visual C++ team and adopted the latest MSVC toolchain enhancements together with SPGO to squeeze more performance out of Photoshop’s CPU-bound workloads. Unlike traditional Profile Guided Optimization (PGO), which requires developers to create special instrumented builds and run lengthy training workloads, SPGO gathers performance data directly from optimized release binaries. This means Adobe could collect real-world usage information which gives a major advantage to this technique, as companies could leverage data collected from actual customer workloads rather than only relying on synthetic benchmark runs. In theory, this should allow optimizations to better reflect how users interact with software in the real world. Thanks to this, there are improvements to code layout, function inlining, hot-and-cold code separation, and other low-level tweaks that help processors execute instructions more efficiently. Essentially the compiler is better able to identify “hot” code paths, those which are most frequently executed, and optimize them accordingly.
    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months

      By fernan99 · Posted

      "The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months¨ I'd prefer to see the lowest price in over a year
    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months

      By sphbecker · Posted

      Glad these prices are starting to come down, but that is still crazy. I bought the 2TB 9100 Pro (slightly more expensive version with PCIe 5.0) last year for $240.
    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months

      By hellowalkman · Posted

      The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months by Sayan Sen Yesterday, we covered a really good deal wherein you can get a 4TB TeamGroup T-FORCE G50 NVMe PCIe Gen4 SSD for a low price of just $400 with a special discount coupon. That's just $100 per TB, making it a very good offer during these hard times. The deal is still live, so you can check it out in its dedicated article here if you do not want to miss out. Meanwhile, if you don't have that kind of budget but still wish to buy an SSD for a good price, the 2TB variant of the TeamGroup SSD at $280 its lowest price in over three months. Meanwhile, those seeking 2TB but faster performance can check out Samsung's 990 PRO, which has hit the lowest price also in the last quarter or so, as it's on sale for $370 (purchase links under the specs table down below). Thus, you want a faster drive, get the 990 Pro, or you want more capacity, grab the TeamGroup 4TB linked in the first para. The 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification TeamGroup T-FORCE G50 2TB Samsung 990 PRO 2TB Interface PCIe 4.0 x4, NVMe 1.4 PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 M.2 2280 Controller InnoGrit Controller Samsung In-house Controller NAND Flash 3D TLC 3D TLC DRAM Cache None (HMB supported) 2GB LPDDR4 Sequential Read (Max) 5,000 MB/s 7,450 MB/s Sequential Write (Max) 4,500 MB/s 6,900 MB/s Random Read (4K) Up to 600,000 IOPS Up to 1,400,000 IOPS Random Write (4K) Up to 700,000 IOPS Up to 1,550,000 IOPS TBW (Endurance) 1,300 TBW 1,200 TBW MTBF 3,000,000 hours 1,500,000 hours Operating Temperature 0°C to 70°C 0°C to 70°C Storage Temperature -40°C to 85°C -40°C to 85°C Shock Resistance 1,500G / 0.5ms 1,500G / 0.5ms Heatsink Patented Graphene Heat Spreader No Get them at the links below: Samsung 990 PRO SSD 2TB (MZ-V9P2T0B/AM): $369.99 (Sold and Shipped by Amazon US) TEAMGROUP T-Force G50 2TB SSD (TM8FFE002T0C129): $279.99 (Sold by TeamGroup, Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.

  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      70
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!