Recommended Posts

Hello,

 

I'm a student and have to configure a captive portal for my project using pfsense.

 

My project is to configure a '' WAN network '' but on a private lab. For that, I need to configure a UNREAL Tournament game server on a DMZ, and the clients are separated from it by another router and can access it in order to play it.

 

 

It's simpler with a picture so the network I have is the following : 

 

 

  post-519605-0-33871900-1399981945.png

 

 

 

 

So, what I want to do, is telling the clients that as long as they are not authenticated by the captive portal, they can't access to the network and therefore they can't access the game.

 

The problems are : I dont have a dedicated machine to run pfsense so I have to run it on VMs, and my all network doesnt have internet access.

 

I've managed to do this so far : 

 

post-519605-0-12312300-1399982431.png

 

 

NIC1 is my WAN interface and NIC2 is my LAN interface.

 

I can access the webConfigurator.

But from the LAN I can't ping the WAN interface.

 

THe LAN interface is setup as 192.168.1.1, DHCP Disable because I have my own DHCP server on the ROUTER 1

 

The WAN interface is setup statically as 192.168.10.2 and upstream gateway is 192.168.10.1.

 

I'm pretty sure the problem is from this WAN interface setup but I don't know how to fix it really so some help would be nice.

 

Thank you

 

 

 

 

 

 

 

 

 

 

 

 

 

"and my all network doesnt have internet access."

 

What does this mean - you clearly have internet.. Since you posted this?

 

What does the internet have to do with anything if "your" running the game server?  This could be all done on vm..  So both routers are pfsense?  Everything even the clients could be vms

 

You show 2 routers, and your pfsense vm?  So there are 3 routers?  So this router1 and router2 and the game server all reside in physical?

 

And the host your on is on this 192.168.10.0/24 network?  And your clients that need to get to the game server are going to be physical or vms?

This means, my host machine has internet access but I can't allow VMs to have the access because this is an university network with so much restrictions.

 

No both routers are ciscos, the only reason I'm using pfsense is to do the captive portal.

 

Kinda hard to explain but I hope it's understandable.

 

 

And yeah everything is physical except the clients who plays the game from Virtual Machines and the pfsense 

Is your host connected to this switch that is the 192.168.10.0/24 network?  From the drawing its not.

 

You have a line from the 192.168.10.0/24 switch to pfsense -- but to what?

 

You say your lan can not ping what wan?  Pfsense 192.168.10.2?  Can pfsense ping 192.168.10.1?

The host machine is not connected to the 192.168.10.0/24 network because I can't touch any ethernet interfaces -.-

 

I forgot on the drawing that the VMs are connected to the switch, all of them.

 

Also I need to know, with my setup , the VM clients should have an IP address like 192.168.10.x with 192.168.10.1 gateway or 192.168.1.x with 192.168.1.1 gateway ?

 

Sorry i'm new to this and really confused.

 

When my VM client has the address 192.168.10.x I can ping the WAN interface but not the lan and vice-versa.

 

Pfsense can't ping 192.168.10.1

"The host machine is not connected to the 192.168.10.0/24 network because I can't touch any ethernet interfaces -.-"

 

Then how and the F is pfsense suppose to be able to talk with 192.168.10.1 ??  So that it can then talk to the game server??  Magic??

 

So you have no wire that runs from this switch to the host box that pfsense is running vm on?  Then how do you show a wire from that switch to pfsense??

 

The host that is running your VM software, that pfsense is a vm on has to have a physical connection to that switch 192.168.10.0/24 or it is not possible for pfsense to be connected to that network - yet you show a line..  Your pc does not have to have an IP in that network.. But it needs a physical connection so that your vm can connect.

 

what are the current connections on your host machine?

Here like this

 

post-14624-0-33109000-1399987608.png

 

BTW that 172.108 is a public IP space.. rfc1918 space that starts with 172.16-31.x.x

 

BTW why are you doing nat on the other routers?  Are you not just pretending those are internet services - the nat is of no point when everything is rfc1918 space..  Is that really 172.108 public IP space?

Ok that was pretty stupid from me. I did the config with my personal laptop, which means I don't have internet access though :

 

WAN Interface : Bridged : Configured by DHCP ( because the ROUTER 1 does DHCP server ) : address 192.168.10.7 , gatewway : 192.168.10.1.

                                                                                                                       

LAN Interface : Internal network intnet : 192.168.1.1. 

 

so pfsense can now ping 192.168.10.1. 

 

Although, from my client VM which is setup as 192.168.10.8 with 192.168.10.1 gateway. The VM is on my personal laptop and is in Internal network intnet.

 

When i try to ping the WAN interface of pfsense ( which is now 192.168.10.7 ) it says " Destination host unreachable. "

 

So now, is this a route problem or something else ? I'm so lost with VMs

 

( I also tried with VM setup as 192.168.1.8 and gateway 192.168.1.1 , because it makes more sense, and it says Request timed out )

 

 

EDIT : Didnt see your last post, 172.108 is a public space but the lab where i'm working is like isolated from the rest so i can put any IP addresses I want, this part will actually be a DMZ later on

"172.108 is a public space but the lab where i'm working is like isolated from the rest"

Still VERY VERY BAD!!! Practice to use external public IP space that is not owned by you on your network. There is plenty of rfc1918 space - there is no reason to use public IP space that is not owned you on your own network. And even if owned by you, using it what is clearly a private network makes for confusion.

Now I currently don't show any whois for 172.108, the 172.16/12 is rfc1918, but for example 172.0/12

NetRange: 172.0.0.0 - 172.15.255.255

CIDR: 172.0.0.0/12

OrgName: AT&T Internet Services

You should not be using this address space - it is a VERY BAD habit to get into pulling address space out of thin air and using it.

Ok if the router for 192.168.10.0/24 is handing out dhcp - you can not just use static.. That could cause all kinds of problems (how do you know there is not another device using that IP?). In your vm software if you bridge physical interface that is connect to this 192.168.10.0/24 network, your physical machine should get an IP. And then the virtual machines with interfaces on this network should also get an IP from the dhcp server on this network. Since the VM virtual nic bridged to your physical would have its own mac.

Now you mention this is school and you can not connect vms to the internet? Who owns this router for the 192.168.10.0/24 network and this switch. If it is running any sort of nac or nap, port security - its possible that only the mac it first sees on a port is allowed an IP, etc. Or registered macs can get an IP, etc.

In a nutshell. On your pfsense vm, on its wan interface that is bridged to your physical interface connected to the 192.168.10.0/24 network - you should be able to set it to dhcp and get a IP. If it doesn't then your never going to get this to work. And you need to contact who admins that router, etc. If pfsense can not talk to its wan gateway - then no vms you put behind it would be able to talk out the wan, etc.

If your physical host can ping to the 192.168.10.1 router - then your pfsense wan via dhcp should also be able to ping this 192.168.10.1 address.

Hm actually I had to find a free captive portal solution , considering most of the computers in the lab are using windows I thought of Firstpot but it was not free and then I found pfsense which seemed pretty simple to use. Then my supervisors agreed with that solution even if they didn't know pfsense can be used as a captive portal lol

  • 3 weeks later...

Well, the project is not finished yet and I have another problem and I don't know how to fix it again -_-

 

So, once I did the captive portal and radius everything works fine if I have internet, but considering in my test lab I don't have internet, I can't use the ISP DNS so the redirection to the captive portal does not work.

 

That's why I installed the bind service. I configured it like this http://ejnetwork.wordpress.com/2014/01/17/blocking-domains-with-pfsense-using-bind/.

 

I am really new to DNS configurations and I still don't know if it is possible to redirect every http or https request to the captive portal. For now if a user enter an IP address in the URL I am able to redirect it but if he types in any domain name like "rjwiepjpweihgpwerihgew" for exemple it doesn't work.

 

So I think it's coming from the DNS server that I configured badly but I don't really know.

 

Sorry again and thank you in advance 

And why can you not just use the built in dns of pfsense, you can create host over rides for anything you want..  This would be the common setup for using pfsense..  Yes you would have pfsense forward to something for public dns like your isp or googledns, opendns, etc..

 

But for testing you can create whatever host records you need.. For example if you want www.google.com to resovle to 1.2.3.4 its a simple over ride.  While I love Bind, and it is the golden standard for dns - its not something you start using without some decent understanding of the underlaying principles of dns, etc..

 

I really would suggest you use pfsense built in dns..

 

C:\Users\BudMan>ping www.google.com

Pinging www.google.com [1.2.3.4] with 32 bytes of data:
Control-C
^C

 

post-14624-0-81083600-1401803320.png

 

I use bind because I have basic linux knowledges and the point of my project is to know more about this, my supervisors just said " use bind " so I did lol

 

THe only point of that is actually this :

 

A client will access our game server, but he can't access it as long as he doesn't authenticate himself on the captive portal.

 

So i saw that on BIND I can modify the file /etc/hosts and tell him like this : " 172.108.10.2 gameserver "

 

So then, if i try to connect onto 172.108.10.2, does the captive portal webpage is supposed to pop ?.

you would not be editing any /etc/hosts file in bind.. Where did you see that?

/etc/hosts is a local file for name resolution - has nothing to do with bind at all.

BIND is a recursive or authoritative name server.. Or both.. If all you want is a host to resolve something.domain.tld to some IP then sure you could edit on linux the /etc/hosts file - or on windows you could do the same thing under C:\Windows\System32\drivers\etc there is hosts file you could edit.

Not sure what you think that has to do with a captive portal.. Captive portal can require you to auth yes, but it redirects where ever your going to the "portal" part.. Does not matter if your going to www.google.com, www.neowin.com or whatever.. The captive portal redirects wherever your trying to go to the portal.. Then once you auth, then it lets you go to where you were starting to go. Or some other landing page, etc.

Where do you want your client to go, your game server? What is the fqdn of this name server, and what are you using for local dns so that it resolves? I would assume your systems are using pfsense for dns.. Since this is how it works out of the box and is the common 99.9% of the time setup.

If you are pointing your client to something else for dns, then sure any FQDN you want to go to be it on the internet or you local network should resolve. If your not using local dns, and you need your client to resolve something for a local type fqdn, something.foo.tld then sure you could use a host file.

Oh ok i definitely didn't understand a damn thing ahah thank you.

;

Yes my client needs to go on my game server. His fqdn is GameServer-HP. I wanted to use the pfsense bind package as a local DNS to resolve it.

 

But if i understood everything correctly, which I am really not sure, if the clients wants to connect to the gameserver he will be redirected to the captive portal webpage if I set up the host file ? I don't even need a local DNS ??

 

I'm really sorry for all these questions and I'm really grateful for all the help budman thank you !

Why would you need bind on pfsense, unless you were going to do something really fancy like zone xfer, etc.. Bind is way over the top for resolving a fqdn to an IP. The builtin dnsmasq can do this with a simple host override.

gameserver-hp is not a fqdn btw. gameserver-hp.something.tld would be a fully qualified domain name.

To be redirected your host doesn't have to resolve anything, you could go http://ipaddress and it should be redirected to the captive portal. If you want to go http://gameserver-hp that resolves to ipaddress on your box that is fine. But it has little to do with the redirection mech of a captive portal.

does not matter where you try to go, the captive portal redirects you to its landing page. Once you auth, put in payment, use a voucher, etc. And the captive portal accepts it then it will send you on to where you really were wanting to go. Does not matter if you can really get there or not. The captive portal does not need to even be able to resolve this.

BTW your trying to hit a http or https site right, running some game software that connects to some gameserver port in some game software is not going to get redirected. The captive portal is going to only redirect http or https requests.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • In the way that you framed it incorrectly. You wrote: "The constant need to close all browser sessions and wait for a new version to install" There's no "constant need to close all browser sessions". That's factually incorrect. The browser downloads its updates in the background and installs them when you open it again. Silently. And there's no "wait for a new version to install", updates are small and take 2-3 extra seconds AT MOST, if any. If you have an SSD, there's zero extra time. Also, every mainstream browser operates this way. Firefox, the FOSS go-to browser, the default on almost every Linux distro, does exactly the same. Also, you don't need to constantly restart Edge for updates to install, you can completely ignore them and it doesn't even ask you to handle them, it's all silent and automatic. So I don't understand what else do you want.
    • DuRoBo Krono Review: Portable E-Ink reader with great ideas that need a bit of improvement by Taras Buria Phone-sized e-readers are gaining traction these days, with more people treating them as a getaway device to cure phone addiction (or at least they are trying to) or having a more pocket-friendly reader that is easier to carry and hold. The market now has plenty of such readers to choose from, and DuRoBo is the latest addition, a new player that offers a more interesting approach to the idea. The Krono is a $279 e-reader with an interesting twist, which tries to make the device more fun and ergonomic. Here is my review. Disclaimer: DuRoBo provided the review sample without any editorial input or pre-approval. The Krono comes in a phone-sized box with pink accents. Inside, you get the device itself, a short user manual, and a USB cable. The cable is a bit old-fashioned, Type-A to Type-C, which is a bit disappointing. Hot take: I would rather have no cable in the box rather than another Type-A cable that gets immediately thrown into my box full of similar cables I never use. The Krono also has no charger in the box, as it relies on accessories you already own, which is fine with me. Here are the specs: Dimensions 154 x 80 x 9.0 mm or 6.06" x 3.15" x 0.35" 173 g or 6.10 oz Materials Black or White plastic Display 6.13-inch E-Ink Carta 1200, 1,648 x 824 pixels, 300 ppi Touch-capacitive. Dual-tone frontlight. Processor 8-core Qualcomm Snapdragon 690 (QTI SM6350) 2 performance cores at 2.07 GHz 4 efficiency cores at 1.71 GHz Memory 6 GB Storage 128GB, non-expandable ~104GB available out-of-the-box Operating system Android 15 with a custom launcher Connectivity Wi-Fi and Bluetooth Battery 3,950 mAh battery Buttons and port USB Type-C port Power button, Volume button, Smart Dial Breathing Lights Audio Mono Speaker and Dual microphones In the box The Krono, a Type-A to Type-C cable, user manual Price $279 on Amazon First impressions Right off the bat, no, this is not a phone replacement. Do not approach this device thinking it can serve you as a dumb phone to cure your TikTok addiction. In addition to the fact that the Krono has no cellular connectivity, I strongly believe that no amount of extra devices can fix your phone addiction until you put some serious effort into it. The Krono is a phone-sized e-reader, a companion for your phone dedicated to reading without distractions. The DuRoBo Krono is made of plastic with a very fine texture. It is hardly premium, but I also cannot say it feels cheap. The device is also a bit thick, quite dense, and well-built without rattling or cracking. You get to choose between two colors: white and black. The front has quite thick bezels, which is hardly surprising for an e-ink device. These things use front light, with LEDs usually placed on the screen perimeter. While I do not mind thicker bezels, the notably larger chin cheapens the look a little. What I mind is a notable seam between the display and the main case, which, after just two days of use, collected plenty of dust and specks. The back of the Krono is what makes the device stand out. There is a cylinder (DuRoBo calls it the Axis) embedded in the back of the reader, housing three elements: a power button on the right edge, a Smart Dial on the left edge, and "Breathing Lights" on the back. An etched DuRoBo logo sits below the cylinder, and it is the only piece of branding you can find on the device. Overall, the design and materials are very unassuming, but the cylinder with additional control elements certainly elevates the look and makes it more interesting. Other physical elements include two microphones (one on the top edge and one on the bottom edge), a USB Type-C port, a volume rocker, and a single mono speaker. There is no fingerprint reader, so if you want to protect your device, a PIN is your only option. The official TPU case is not the most premium-looking Display The Krono has a 6.1-inch E-Ink Carta 1200 touchscreen display with a resolution of 1,648 x 824 pixels (300 ppi). The display is front-lit, and you can adjust the brightness and temperature from cool to warm. Unfortunately, the Krono lacks automatic brightness and temperature adjustments, and you cannot set a custom schedule for the frontlight. However, you can set it to always enable frontlight so that you can see what is happening on the screen when turning it on in a dark environment. On the bright side (get it?), the front light can get extremely dim so that the screen is barely readable in a pitch-dark room. The front light is also uniform across the screen, with no noticeable temperature gradients. I am very susceptible to uneven front light, and it is very easy for me to notice it, but the Krono is doing a very good job in this area. I also like that the edge shadow is not very prominent and barely visible in the black variant. E-Ink Carta 1200 is not the newest generation (there are Carta 1250 and 1300), but it is still a good display. It supports three modes: Clarity, Speed, and Quality. In Clarity mode, text is very sharp and easy to read, but you trade that for more ghosting, a slower refresh rate, and more artifacts when the display changes images. Speed mode, as the name suggests, boosts refresh rate and reduces ghosting, but fine print and text become more jagged. Finally, Quality mode is only available in Android apps. It has the lowest refresh rate, but in return, you get much better visuals, improved gradients, and more. Like brightness and temperature, you can toggle modes from the control center. It is available when swiping from the top-right corner of the screen (the top-left is for notifications). I also like that the Krono can work as a desk clock when not in use. It has a bunch of screensavers, including horizontal clocks with time, date, and current battery level. The screen refreshes once per minute, and battery drain is extremely low (not even 1% in 24 hours). It is a great use of the technology, and another thing I wish more e-ink devices featured. Smart Dial The Smart Dial is Krono's main party trick. It sits on the left side of the device and serves multiple purposes. You can twist or press it to perform various actions, depending on the current use case scenario. When reading books, twisting the dial flips through pages, and pressing it refreshes the screen. On the home screen, the dial adjusts the brightness, and holding the dial pressed launches voice note recording. Finally, a quick double press launches the DuRoBo AI chatbot. While the dial scroll is not notched, it is very smooth and has haptic feedback that confirms your actions, which feels very nice. As a long-term Apple Watch user, I love the idea behind the dial. It feels very natural and oddly satisfying to use, especially with that subtle haptic feedback. I never liked flipping pages with touch input, and I strongly believe each e-reader should come with some sort of physical controls for turning pages. The Krono has both volume buttons (which also work as page turners) and the dial, so you are free to use whichever you prefer. With that said, the dial is not perfect. For one, it sticks out of the case way too far for my liking, raising concerns about durability and longevity when carrying the Krono around in a pocket (it is a pocket-sized device after all). Also, it has too much wobble, which cheapens the experience and makes it feel a bit flimsy and unsecured. While there are two plastic guards on the Krono's case, they are way too small for any kind of protection. I also think DuRoBo should let users customize dial actions (the only available customization is scroll direction), particularly for long and double presses. Not everyone needs voice notes, and DuRoBo AI does not work without an active internet connection, leaving the long press essentially useless when offline. I do not mind these features, and I genuinely think they are useful, but I would rather have the ability to toggle between screen modes, turn the frontlight on/off, or launch my favorite app. I also agree with people on Reddit asking developers to let users adjust the dial sensitivity. I hope this is something DuRoBo can implement with a software update to make the experience more personalized (it is a Smart Dial, after all) and incentivize users to fiddle with the Dial more often. The Dial is a fantastic idea, so please, guys, improve it a little. As for ergonomics, they are mostly fine, but the dial's position may feel a little awkward and way too high. When I use a phone or a phone-sized gadget, I tend to rest one of its corners on my palm for a more secure grip. With the Krono, such a grip is impossible because you cannot reach the dial even with big hands. You have to lower the reader a bit and hold it like a bottle without any extra support for the bottom edge. Such a grip is not necessarily uncomfortable (the Krono is also light enough for it), but it requires a bit of muscle retraining. Sometimes, I do not bother with the dial and hold the Krono like my phone, flipping through pages with volume buttons, as they are perfectly positioned for my right-hand thumb. Interestingly, when testing the Krono, I would often find myself thinking that a roller embedded in the long plastic cylinder on the back of the device would have been a much more comfortable solution. There is a free idea for you, guys. Software The Krono runs Android 15 with a very minimal launcher on top. The home screen presents you with a list of apps, a scrollable list of widgets, and your user profile. Widgets can display time, calendar, or recent books for quick access. You can also add or remove apps from the home screen to keep the most useful stuff around without tapping "Apps." I like this minimalistic approach; it looks clean, easy to understand, and light. I understand that some may find the list of all apps way too clean, but fortunately, DuRoBo lets you switch to traditional icons. The reader also has a bunch of preinstalled apps: Read: The default app for reading. Browser: A Chromium-based browser. Files: A simple file manager. Music: A simple music player. Spark: A voice recorder with transcription support and AI summarization DuRoBo AI: A built-in AI chatbot. Transfer: An app for file transfer over Wi-Fi. If that is not enough, there is the Google Play Store, where you can download all the extra apps you need, alternative readers, podcast apps, chatbots, and more. DuRoBo is not trying to give you an all-in-one device. The standard software experience is quite minimal, which makes it easy to approach and learn. The standard reader supports EPUB, EPUB3, AZW3, MOBI, PDF, TXT, DOC, and DOCX, which is more than enough to let you read most books without third-party software. As for customizing the reading experience, you can select one of five built-in fonts, adjust size and thickness, adjust margins and spacing (only three variants for each), change text alignment and direction, toggle the reading status bar, and switch to dark mode. There is also text-to-speech, which utilizes Android's default TTS tech. While I like the simplistic approach, I cannot help but feel DuRoBo could have made the built-in reader a bit more customizable. However, I am not going to bog down on this, as you can always install any other reader you prefer using the Play Store or by sideloading an APK. Getting books to the Krono is very simple. Given that the device is an Android smartphone without cellular connectivity, you can transfer files via a USB Type-C cable, download them using the built-in browser, share them over Bluetooth, or use cloud storage. My favorite was the built-in Transfer app. It is simple, reliable, and very well-designed. I was surprised by how well-designed the web portal is. It is fast, pretty, and properly categorized. Well done! Once you have your books loaded, you can highlight or underline text, add annotations, bookmark pages, check the table of contents, and ask AI about the selected text. Unfortunately, the Krono has no built-in vocabulary, but again, that is something a third-party reader could fix. Overall, the built-in reader is light and snappy, with just the minimum amount of features for a regular user to enjoy reading books. The Krono has no built-in reading tracking, so stat nerds will have to look for third-party reading apps. However, you can set a daily reading goal, and the reader will notify you when you reach it (for example, one hour). You can also set a reminder to read at a certain time, and when the time comes, the Krono will light up its back LEDs and unlock itself to nudge you. Other than that, the rear LEDs do nothing, not even showing charging progress, which is an unfortunate misopportunity if you ask me. Quirks aside, Krono's Android runs quite snappily and bug-free. Early reviews of the Krono criticized its Android 13-based software quite a lot, but now, the reader runs Android 15, and its software has fixed plenty of initial complaints. I never experienced any issues with built-in apps. AI attempts The DuRoBo Krono comes with a built-in AI chatbot. There is no information on what model powers this thing, but the system says it was "trained by Google." You can launch the bot from the app list or by double-pressing the dial. It works just like any other chatbot, and you can ask it anything by typing or using voice input. The AI saves your chats, and you can rename, export, or delete them. DuRoBo AI requires an active internet connection, and it does not work offline. Its reach and capabilities are also limited. You can only chat in the app and use it in the reader app as a makeshift vocabulary. However, the implementation is kinda awkward. You can only send a selected portion of text to AI without giving it any requests or instructions. I highlighted the word "dumb," and it apologized to me for not being useful. You also cannot ask follow-up questions or send the generated response to a separate chat. The chatbot is also slow, even with fast Wi-Fi, making the overall experience quite frustrating, which makes me again wish for the ability to remap the double press to something else. Spark, the standard voice recording app, also uses AI for note summarization and transcribing. Neither feature works offline, unfortunately. Spark records notes up to 30 minutes using Krono's dual microphones, and you can rename or export notes. Transcription quality is decent, and the speed is alright, but you can find much better solutions in the Google Play Store. What I like about Spark is that transcribed notes are not locked, and you can always type more to elaborate on your ideas, which is handy. Overall, I like that the Krono is not shoving AI down my throat, but to be honest, there is really not that much to shove. AI features here feel raw and need improvements to be more useful. Battery Life Like most E-Ink readers, the Krono has fantastic battery life. Even with a clock as a screensaver, its standby power consumption is incredibly low. And when in use, you can get weeks of reading on a single charge. Without the front light, my unit never sipped more than one or two percent of battery during a one-hour reading session. It was nice to see plenty of battery-related settings. You can limit charging at 80% to protect battery health long-term, check the number of charging cycles, manufacturing/first-time use date, battery health, and the maximum capacity. Additionally, the Krono lets you select what hardware remains enabled when sleeping. This lets you keep Wi-Fi and Bluetooth on (say, if you want to receive notifications, for some reason) and keep audio playing when locked. Turning these features off effectively eliminates any standby battery drain. I left my Krono sitting for 24 hours with a clock screensaver on, and it did not drop a single percent. The pretty big 3,950 mAh battery justifies the device's thickness and ensures you do not have to charge it for long periods. Speaking of charging, it is capped at only 10W, which is a bit disappointing, as getting such a big battery to 100% takes a notably long time in the era of super-fast charging smartphones. DuRoBo Moodi The Moodi is a standalone, optional accessory for your Krono. It is a wireless remote with two customizable buttons that you can use to flip pages, control media, or scroll webpages. The accessory connects via Bluetooth. Despite having a built-in rechargeable battery, it is extremely light. While the Moodi's shape and form factor is not what I would call particularly ergonomic, it is not uncomfortable to hold and use. The Moodi comes with six removable magnetic buttons with various smiley faces. Buttons sit securely, and they have nice-feeling, albeit a little loud, clicks. It is a cute touch that adds a little more fun and character to the device. There is also an accented power button and a single status LED. The latter displays charging status and connection mode. The Moodi supports three modes: Reading: Buttons work as volume buttons, allowing you to flip pages in the built-in reader or other apps that support page turning with volume buttons. Media: Buttons work as skip forward/backward, which is useful when listening to audiobooks, podcasts, or music. Scroll: The third mode lets you scroll pages in the web browser or any other application The Krono properly detects the Moodi and presents you with an on-screen guide when you connect it for the first time (it also displays the battery level). However, you can only change modes by holding both buttons for a few seconds. It is also worth noting that the Moodi works with other devices. I connected it to my iPhone and it let me adjust volume or control media playback. Sadly, the scroll did not work, so you cannot use it to waste time scrolling TikToks. Overall, the Moodi is a cute little accessory, which I can recommend for those who read a lot. It is very useful for remote page flipping when you do not want to burden your hands by holding the Krono all the time. I only wish DuRoBo included a lanyard for the built-in loop. As for the battery life, after using the Moodi for a few days, I only managed to drop several percent of its 90 mAh battery. Despite the small size, it is rated for weeks of use, which is pretty impressive. At $35.99, I cannot say the Moodi is a must-have accessory, but I see the appeal. I prefer using the Krono with its Smart Dial, as I rarely read for more than 40-60 minutes in one sitting. However, if you have a stand and like reading for long periods, the Moodi is the right thing to have. It is a bit more expensive than regular page flippers on Amazon, but it is on par with similar products from Kobo or BOOX. Plus, it has a little more fun to it with removable buttons and better integration into the Krono. Conclusion At the end of the day, DuRoBo Krono is a nice pocket-sized e-reader. Its software focuses on the main things without trying to be everything at once. The smart dial idea is unique and great, and I wish more manufacturers had something similar in their devices. The display is also good, with an even frontlight and "always-on" support. I did not notice any deal-breaking issues with the Krono. However, you can feel that the idea needs some improvements, such as a slightly stiffer dial in a more ergonomic location, perhaps a little more premium materials, and better software customization. I hope the company won't give up on the idea and improve the dial and ergonomics in the second generation. Buy DuRoBo Krono Black - $279.99 on Amazon Buy DuRoBo Krono White - $279.99 on Amazon Buy DuRoBo Moodi - $35.99 on Amazon As an Amazon Associate, we earn from qualifying purchases.
    • In what way is any of what I said incorrect? To install an update you need to close all browser instances, upping it from once a month to once a fortnight is an inconvenience for users. Particularly when updates don't offer functionality that users want (notably copilot). Security updates should come as they are needed, not on a release schedule
    • Dopamine 3.0.6 by Razvan Serea Dopamine is an awesome free audio player which tries to make organizing and listening to music as simple and pretty as possible. Dopamine has been designed for Windows 7, Windows 8.x and Windows 10 and plays mp3, ogg vorbis, flac, wma and m4a/aac music formats quite well. The best part? It's created by long-time Neowin member, Raphaël Godart. If you’re looking for a music player to handle a large music collection, you should definitely give Dopamine a try. Dopamine 3.0.6 changelog: Fixed Manually edited album covers are overwritten on the next collection refresh Fixed AppImage package not working on modern GNU/Linux distributions Deleting song from playlist sometimes fails Playback controls only work when clicking on upper half of the buttons It's unclear that files must be tagged with an external ReplayGain scanner (for example rsgain) before normalization can take effect. Change to Artist or Album tags is not reflected in the song list view nor in the Now Playing information ReplayGain issues Smart playlist filters ignore text containing accents or other special characters Some MP3 files trigger an "MPEG header not found" error due to a too-narrow initial MPEG header scan range Changed Updated the Vietnamese translation Download: Dopamine 3.0.6 | 122.0 MB (Open Source) Links: Home Page | Forum Discussion | Screenshot | Other OSes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      194
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!