Recommended Posts

Firstly thanks to ASUS for providing me with this sample to review! :)

 

This is a new high end sound card from ASUS that has a lot to offer!

 

Features:

 

  • Industry-leading 124dB SNR (signal-to-noise ratio) audio quality inherited from the revolutionary and widely-acclaimed Xonar Essence ST/STX
  • Ultra-low jitter with premium TCXO clock source
  • Clean and consistent power supply thanks to high-fidelity low-dropout (LDO) regulators and WIMA? capacitors for uncompromising sound
  • Top-notch headphone amplifier supports up to 600ohm-headphone impedance with additional gain for in-ear monitors (IEMs)
  • Exclusive op-amp swap kit includes three op-amps and tool for easy tone tuning
  • Celebrated MUSES op-amps deliver true-to-life musicality
  • Ultra-fidelity (120dB SNR) 7.1-channel output via the exclusive daughterboard

 

For more information on this sound card, visit here.
 
Packaging:

 

The sound card and accessories come in a nice attractive box with detailed information printed on most areas of the box.
 
i1uUgNK.png

 

Once the box is removed, we are presented with this gorgeous looking main sound card furnished with a gun metal brushed finish and a lion shaped insignia.

 

lWzzH2X.png

 

We also get another small package inside the main box, which contains the daughter board and accessories; IDE cable, 3.5mm to 6.3mm adapter, Op-amp swap kit, 3.5mm to RCA adaptor cable, S/PDIF TOSLINK optical adapter

 

HfuQz1Z.png
wyb2EtR.png
 
Under the padding, we have a CD, which contains software/drivers, user manual and a quick start guide:

 

zNXGiucl.jpg

 

Installation:

 

Installing this sound card was straight forward and quick thanks to the easy to follow quick start guide. An IDE cable is used to connect the daughter board and main card and a molex power cable is required to power the sound card.

 

myuv6Kn.png

 

The daughterboard + sound card take up two PCI slots, only one PCI express slot is required though.

 

R947p1Ql.jpg

 

Software:

 

With the soundcard and software installed, lets have a look at control panel.
 
UihStBU.pngZ6BJGvw.png5HBuVA6.png

 

As you can see, there are plenty of options to mess around with and be able to fine tune the sound to your liking.

 

Personally, I find the software "overall" a little dated looking especially when you compare it to ASUS's networking software/control panel for their wireless adapters and routers.

 

Sound Quality:

 

Onto the most important area now and unfortunately, you need powered analogue speakers to use with this sound card. Besides, I wasn't able to use my Creative T6100 5.1 setup due to the front right speaker using a DIN connection anyway so had to use a Yamaha TSS-1 5.1 + amplifier setup connected via the S/PDIF connection.

 

I tried various audio files out i.e. DTS, FLAC, MP3

 

Using the yamaha TSS-1 5.1 + amplifier system connected via S/PDIF provided an amazing surround sound experience, clarity was superb and the surround effect couldn't be any more immersive. However, to my ears, there was not much difference between my motherboard's (GA-P55-UD3) onboard S/PDIF connection and the S/PDIF connection on the sound card, however, by using the ASUS S/PDIF connection you gain access to more controls/settings, which would allow you to further fine tune the sound to your liking.

 

I wasn't able to test out the Plantronics 780 headset since it uses a USB connection thus it would bypass the sound card completely, however, I tried out Sennheiser HD 202 headphones, which provided a superb listening experience, truly blows my Plantronics 780 headset away! The clarity and just sheer quality was mind blowing, I could also hear more ambient noises in films and games.

 

For the true audiophiles out there, ASUS have given you even more options to adjust the tones by providing three additional op-amps (2 x LME49720 & 1 x MUSES8820)

 

9Fcl5LPl.jpg

 

EDIT:
 
Just to provide a bit of an update.
 
I have only recently been able to make proper use of this sound card. I bought the Edifier RT1600 speakers about 3/4 months ago and had been using them with my motherboard's onboard sound and thought they sounded amazing compared to my previous yamaha and creative speakers.
 
In the last week, I reinstalled the ASUS essence STX II soundcard and connected the Edifier speakers to it and wow! The difference in quality is truly amazing, as you can probably imagine, it is hard to describe how something sounds  :p I would say the most noticeable differences are clarity and depth. The experience of watching content on the PC has now excelled as the soundcard greatly enhances the immersive nature of the audio content. There is a much more dynamic audio environment, imbuing tones with a greater punch and depth, whilst enhancing background sounds with nuanced subtleties.
 
Watching the opening scene of Star Trek Into Darkness was a great way to demonstrate the sound i.e. the volcanic ash noise, the bristling of the leaves, and the creatures making funny noises in the red jungle setting.
 
Lately, I have also been playing Alien Isolation, lets just say, the sound effects in this game with this setup are sending goosebumps down my spine.....
 
I have spent a few days playing around with settings and reading up on what other people's settings are and have settled with this config now:
 
ktnLS9Y.png
 
I watch films and play games more than listening to music. There are a lot of different opinions out there when it comes to sample rate, the majority use 44.1KHz for music and 48KHz for films, personally I find the default setting of 96KHz to sound the best "overall"
 
I also messed around with the EQ, dolby virtual surround sound settings again and whilst they all sound nice in their own way, I have decided to stick with HI-FI mode so that there is no alterations to the sound i.e. you are getting as close to the original recording as possible.
 
Like I said in my review, sound is a very personal thing so you will just have to play about and choose what sounds the best to your ears. I am still in the process of learning and trying to understand the subtleties myself!

 

Conclusion:

 

Unfortunately the lack of powered analogue speakers didn't allow me to experience the full potential of this sound card, however, using the Sennheiser HD202 headphones with this soundcard provides an amazing listening experience for all types of media, it makes my plantronics 780 headset sound awful in comparison, which I originally thought were superb.

 

I am sure with better headphones such as the Creative Aurvana Live, the sound experience would be even better!

 

If you are using satellite speakers, you "need" to have an amplifier as well, otherwise the volume is far too low.

 

As for pricing, there is no official word yet.... but I would expect it to come in at around ?200

 

For now, I can definitely recommend this card for headphone users and people who like lots of ways to fine tune their sound.

 

Pros:

 

  • Amazing quality using headphones and Active speakers
  • Plenty of software features
  • Swappable op-amps

 

Cons:
 
  • Software UI could be better designed
  • Not able to "drive" satellite speakers, need an amplifier to have acceptable volume levels
Link to comment
https://www.neowin.net/forum/topic/1215991-asus-essence-stx-ii-71-review/
Share on other sites

Thanks for the review. I want to buy a good sound card in a few months and I will add this one to my options.

 

From the pictures posted there is no support for low profile brackets, right? Did you swapped those amps to see how they sounded? I'm also interested in knowing if there's any difference in sound quality when using the SPDIF-to-Toslink adapter.

 

The card's design is great. The software looks ugly as hell. I wonder when will be the last time we see this kind of UI in high end motherboards, video cards, sound cards and other system utilities provided by the manufacturers. I don't keep my hopes up too much, sadly.

Thanks for the review. I want to buy a good sound card in a few months and I will add this one to my options.

 

From the pictures posted there is no support for low profile brackets, right? Did you swapped those amps to see how they sounded? I'm also interested in knowing if there's any difference in sound quality when using the SPDIF-to-Toslink adapter.

 

The card's design is great. The software looks ugly as hell. I wonder when will be the last time we see this kind of UI in high end motherboards, video cards, sound cards and other system utilities provided by the manufacturers. I don't keep my hopes up too much, sadly.

Afraid it doesn't support low profile brackets.

 

I didn't swap the op-amps as in order to notice a difference (the differences would be very subtle), you really need true high end audio equipment. When time and funds permit, I will upgrade my speakers/headphones and come back to update this review further.

 

Yup, I don't have much hope that ASUS will update the software UI any time soon either :(

Have you tried seeing what the difference is between Dolby Digital Live and Pro Logix IIx? My experience with integrated audio is that Dolby Digital Live does the same as Pro Logic IIx, encoding all stereo sources to 5.1 channels. OEMs normally provide Digital Live only and not both.

Very nice review. Well done!  (Y)

Thanks :)

 

Have you tried seeing what the difference is between Dolby Digital Live and Pro Logix IIx? My experience with integrated audio is that Dolby Digital Live does the same as Pro Logic IIx, encoding all stereo sources to 5.1 channels. OEMs normally provide Digital Live only and not both.

Sorry wasn't able to test the onboard audio options, the realtek drivers/software for my motherboard don't play nice with W8.1 64 bit :(

 

From my understanding, pro logic IIx should only be used when you have more than 5 speakers i.e. 7.1 speaker setup (for this review, I only had 5 speakers so couldn't test it out)

  • 4 months later...
Just to provide a bit of an update.

 

I have only recently been able to make proper use of this sound card. I bought the Edifier RT1600 speakers about 3/4 months ago and had been using them with my motherboard's onboard sound and thought they sounded amazing compared to my previous yamaha and creative speakers.

 

In the last week, I reinstalled the ASUS essence STX II soundcard and connected the Edifier speakers to it and wow! The difference in quality is truly amazing, as you can probably imagine, it is hard to describe how something sounds :p I would say the most noticeable differences are clarity and depth. The experience of watching content on the PC has now excelled as the soundcard greatly enhances the immersive nature of the audio content. There is a much more dynamic audio environment, imbuing tones with a greater punch and depth, whilst enhancing background sounds with nuanced subtleties.

 

Watching the opening scene of Star Trek Into Darkness was a great way to demonstrate the sound i.e. the volcanic ash noise, the bristling of the leaves, and the creatures making funny noises in the red jungle setting.

 

Lately, I have also been playing Alien Isolation, lets just say, the sound effects in this game with this setup are sending goosebumps down my spine.....

 

I have spent a few days playing around with settings and reading up on what other people's settings are and have settled with this config now:

 

ktnLS9Y.png

 

I watch films and play games more than listening to music. There are a lot of different opinions out there when it comes to sample rate, the majority use 44.1KHz for music and 48KHz for films, personally I find the default setting of 96KHz to sound the best "overall"

 

I also messed around with the EQ, dolby virtual surround sound settings again and whilst they all sound nice in their own way, I have decided to stick with HI-FI mode so that there is no alterations to the sound i.e. you are getting as close to the original recording as possible.

 

Like I said in my review, sound is a very personal thing so you will just have to play about and choose what sounds the best to your ears. I am still in the process of learning and trying to understand the subtleties myself!

 

 

I shall keep updating this review whenever I get new audio equipment :)

  • 6 months later...
 

i'm curious, did you notice any difference versus on board audio and on what? (headphones, speakers etc, in games, listening to lossless, etc? )

 

Sorry, I only just seen your post now, for some reason, my "follow this topic" setting was removed!

 

I covered that in my review :p

 

In the last week, I reinstalled the ASUS essence STX II soundcard and connected the Edifier speakers to it and wow! The difference in quality is truly amazing, as you can probably imagine, it is hard to describe how something sounds   :p I would say the most noticeable differences are clarity and depth. The experience of watching content on the PC has now excelled as the soundcard greatly enhances the immersive nature of the audio content. There is a much more dynamic audio environment, imbuing tones with a greater punch and depth, whilst enhancing background sounds with nuanced subtleties.

 

 

I tried various audio files out i.e. DTS, FLAC, MP3

 
Using the yamaha TSS-1 5.1 + amplifier system connected via S/PDIF provided an amazing surround sound experience, clarity was superb and the surround effect couldn't be any more immersive. However, to my ears, there was not much difference between my motherboard's (GA-P55-UD3) onboard S/PDIF connection and the S/PDIF connection on the sound card, however, by using the ASUS S/PDIF connection you gain access to more controls/settings, which would allow you to further fine tune the sound to your liking.

 

Although I think it is only worth spending this much money on a soundcard if you have got some VERY good expensive speakers/headphones to use, if not, then you could probably get a soundcard for much cheaper that would provide just as good of an audio experience. Worth noting that I am also using a very old motherboard now so the newer motherboards will have better onboard audio than my GA-P55-UD3

 

I am thinking of getting myself some new headphones within the next month so will update the review again.

  • Like 1
This topic is now closed to further replies.
  • Posts

    • Hands-on with BOOX Tappy: cute little reading accessory by Taras Buria Page turners are quite popular accessories for e-readers, as they enable a hands-free reading experience, which is particularly useful with large readers featuring 10-inch or larger displays. The BOOX Tappy is a new accessory that was introduced earlier this year, and we took this cute-looking thingy for a spin. The Tappy comes in a small box, with two additional buttons and a user manual. The device is made of glossy green plastic and resembles old appliances from the nuclear age. Material quality is great, and each part feels quite premium. Plastic is high-quality, the switch is nice to flick, and the buttons are not rattly. At the bottom, four rubberized feet prevent slipping when used on a desk. Unfortunately, there are no color options, and the Tappy is only available in green. It looks good, but I wish there were other options as well. There are two removable buttons, an on/off switch, and an LED indicator that displays connection mode, charging status, and more. The buttons resemble those of an old typewriter, with quite a long travel distance and a pleasant clack. In the box, you have four buttons with different icons: heart, coffee, O, and X. You can easily swap buttons by simply pulling them upwards. Tip: buttons come with plastic covers, but they are quite tricky to remove. It is hard to call the Tappy the most ergonomic remote control, but after fiddling with it for a few hours, I managed to find a comfortable hand position. Attaching a lanyard to it can make it more comfortable in use without the fear of dropping it, but unfortunately, the Tappy does not come with one. The Tappy connects via Bluetooth 5.2, and it works in three modes, which you can toggle by pressing and holding both buttons for about five seconds: Reading Mode Multimedia Mode Browsing Mode Next / Previous page Next / Previous Track Up / Down scroll If you pair the Tappy with a BOOX device (I tested it with the BOOX Go 10.5 Gen 2 Lumi), you will get small pop-ups indicating the current mode. Plus, you can customize what each button does when pressed one time, two times, or held for a few seconds. The list of available actions and features you can use is massive, and I like that BOOX lets you map stuff like brightness adjustment, app launching, screenshot-taking, screen rotating, navigation, and more. Note, however, that while you can use the Tappy with other readers, its customization is only available on BOOX devices running firmware version 4.2 and newer. I could not connect the Tappy to my computer (Windows 11 claims a driver error when I try), but it worked with the DuRoBo Krono that I recently reviewed. My Kindle Paperwhite refused to work with the Tappy, though, just like my iPhone. The Tappy uses a non-removable Li-Ion battery, which can be recharged with a Type-C cable. BOOX rates the remote for "weeks of use," and I can say that it indeed has very good battery life. While there are no battery indicators on the remote, you can see the current level in the status bar or in Input settings in the BOOX firmware. After a few days of active use, mine still shows about 95%. Overall, the Tappy left a nice impression. It is well-made, and the integration with BOOX devices is great. I also like that BOOX decided to have some fun with its design and swappable buttons. I cannot say I am a fan of its odd shape, though. Still, I managed to find a way to use it comfortably. And when not in use, it just looks neat sitting on the table doing nothing or serving you as a small clacky fidget. Buy BOOX Tappy - $29.99 on Amazon US As an Amazon Associate, we earn from qualifying purchases.
    • AdGuard Family lifetime deal now only $14.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 91% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $14.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $14.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!