Recommended Posts

Doom revealed at QuakeCon 2014, and here's what we saw

Ian Birnbaum at  

02:02 on 18 July 2014

 

doom4.jpg

 

In the ten years since Doom 3 was released, Doom 4 has been fabled, rumored, delayed, and scrapped and started over at least once. Id finally pulled back the curtain on Thursday during an exclusive reveal at QuakeCon 2014. In front of a packed auditorium at the 19th annual LAN party/PC game convention, id played a pair of live gameplay demos (running on PC) showing very different parts of the game. As a thanks to fans here in Dallas, the reveal wasn?t streamed online and was for attendees only.

 

The game, for one thing, will not be called Doom 4, but simply Doom, and it will take place on Mars. According to Executive Producer Marty Stratton, the game will be going back to what made the original great: fast action, run-and-gun, inventive and creative combat. He also dropped the news that Doom will be running on id Tech 6, a much-needed update to the years-old technology that has run previous games from id (and struggled with texture pop-in and other technical problems).

 

 

There was a lot of combat on display, and all of it was vicious and full of strafing. The game shows off the verticality we?ve seen in a lot of titles, like Crysis 3, with double-jumps and jetpacks allowing the player to cross gaps and find high ground. Large crates and gaps can be climbed to reach new areas or just to escape from attacking enemies.

 

The mechanic that everyone?s going to be talking about for the rest of QuakeCon, though, is the hand-to-hand finishing moves. After significantly damaging an enemy, they?ll flash and highlight. By stepping close, the player is able to start a variety of combat moves that would be more at home in Mortal Kombat than most shooters. We saw lower jaws pulled off, skulls stomped on, and hearts torn out with the level of detail usually reserved for those slow-mo bullet cams in the Sniper Elite series. Unfortunately, in the ten minutes of gameplay I saw a few repetitions. Given the fullness of time, will we get tired of repetitive killing moves? Maybe, but the first few times will probably be a lot of fun.

 

Also making a triumphant return are massive weapons. We never saw the fabled BFG, but id is taking a lesson from Wolfenstein: The New Order?s jumbo-sized arsenal. All of the guns are huge and clanking. The plasma rifle, in particular, took a few seconds to boot up and engage its various fans and heatsinks. It was a bit showy, but the weapon had a visible knock-back that made it valuable when rooms got crowded with enemies.

 

Doom4-reveal.jpg

 

Speaking of the enemies, there were a ton of them on display. Small demons made themselves annoying while the larger beasts and Hell Knights stomped in to finish the job. All in all it was a fast, chaotic experience that played out with the same stomping, crashing gore that I remember from the glory days of Doom 2.

 

Id showed off two gameplay demos, and it made me think that the game is much further along than we?d previously guessed. This is just speculation, but I wouldn?t be surprised if we see the game released in the same late-spring window that Wolfenstein just enjoyed.

 

Tonight?s reveal was tantalizing, but we don?t know everything about the game yet. Like all fans we do have a wishlist?a few of which we saw tonight. For the others, though, here?s everything we want out of Doom 4.

 

http://www.pcgamer.com/2014/07/18/doom-revealed-at-quakecon-2014-and-heres-what-we-saw/

  • Like 3

In the ten years since Doom 3 was released...

Holy crap, it's been 10 years since Doom 3 was released?

 

The mechanic that everyone?s going to be talking about for the rest of QuakeCon, though, is the hand-to-hand finishing moves. After significantly damaging an enemy, they?ll flash and highlight. By stepping close, the player is able to start a variety of combat moves that would be more at home in Mortal Kombat than most shooters.

This sounds awful. Particularly the bold part. That does NOT belong in a Doom game in my opinion.

  • Like 1

Holy crap, it's been 10 years since Doom 3 was released?

Makes ya feel a bit older doesnt it? Shoot, i remember getting my hands on the leaked Doom 3 alpha code back in 2001/2002. Pretty amazing at the time. It ran on my shiny new Geforce 3 :D

  • Like 2

This sounds awful. Particularly the bold part. That does NOT belong in a Doom game in my opinion.

 

Totally agree, and I hope this doesn't turn out to be a game engine demo to show off tech 6. Like the way most games are going these days.

Not impressed. id Software used to push the boundaries when it came to PC games but that all changed with RAGE, when PC gamers were thrown under the bus. Even Doom 3 was a disappointment in comparison to Far Cry, which was released months earlier. This is going to have to be spectacular for me to even consider it, as id Software never did get round to adding the ending to RAGE. The early concept art for the new Doom was terrible.

  • Like 3

Holy crap, it's been 10 years since Doom 3 was released?

 

This sounds awful. Particularly the bold part. That does NOT belong in a Doom game in my opinion.

John Carmack please come back.

John Carmack please come back.

To be fair I'd rather have him pushing the limits of VR tech at Oculus than wasting his time on another mediocre game at id Software.

  • Like 5

we need to remember that id is basically a graphics engine company that licenses their tech, but occasionally makes a game that shows off the engine's capabilities. 1. graphics engines 2. games.

The last time id Software majorly licensed engines was back in the days of Quake 3 and id Tech 3. The Doom 3 engine (id Tech 4) was only licensed for a handful of third-party games (Prey, Quake Wars and Brink) and it was stated that they weren't interested in licensing the id Tech 5 engine.

Run-and-Gun

Doom 3 was dark and moody like a teenager?s Evanescence-themed bedroom, and that was fun for a little while. After a bit, though, enough is enough. Having to creep around, choosing between a flashlight and a shotgun is anathema to what Doom should be all about. We?re not in a Ridley Scott movie here?we?re battling the forces of hell on earth. Put a shotgun in our hands and let us sprint through clouds of demon blood! We don?t want to hide in a closet, we want to strap a nuke to our foreheads and headbutt Satan into orbit.

 

Run-and-Gun

Doom 3 was dark and moody like a teenager?s Evanescence-themed bedroom, and that was fun for a little while. After a bit, though, enough is enough. Having to creep around, choosing between a flashlight and a shotgun is anathema to what Doom should be all about. We?re not in a Ridley Scott movie here?we?re battling the forces of hell on earth. Put a shotgun in our hands and let us sprint through clouds of demon blood! We don?t want to hide in a closet, we want to strap a nuke to our foreheads and headbutt Satan into orbit.

That last sentence. LOL. epic.

Makes ya feel a bit older doesnt it? Shoot, i remember getting my hands on the leaked Doom 3 alpha code back in 2001/2002. Pretty amazing at the time. It ran on my shiny new Geforce 3 :D

 

A bit older?   A bit?      I played original Doom same year it came out.   Original Wolfenstein 3D too!   :cry: :cry: :cry:

 

 

 

Can't wait to play this one,  however MK style finishing moves and flashing dying enemies sound wrong for this type of game.

A bit older?   A bit?      I played original doom same year it came out.   Original Wolfenstien too!    :cry: :cry: :cry:

Can't wait to play this one,  however MK style finishing moves and flashing dying enemies sound wrong for this type of game.

Agreed, doesn't belong in a shooter.  (And I still got my original Wolfenstein disks around somewhere heh)

 

Hopefully this time around they remember that duct tape exists too.

A bit older?   A bit?      I played original doom same year it came out.   Original Wolfenstien too!    :cry: :cry: :cry:

 

 

 

Can't wait to play this one,  however MK style finishing moves and flashing dying enemies sound wrong for this type of game.

 

Eh! i played ET on Atari 2600 the day it came out XD

  • Like 3

Eh! i played ET on Atari 2600 the day it came out XD

 

LOL.   So I am young then :)       Thanks!

 

 

Seriously though,  Doom 3 was a bit of a disappointment, and I am not getting my hopes up for new one too much...

A bit older?   A bit?      I played original Doom same year it came out.   Original Wolfenstein 3D too!   :cry: :cry: :cry:

 

 

 

Can't wait to play this one,  however MK style finishing moves and flashing dying enemies sound wrong for this type of game.

Me too cough cough. How old were you then?  :shifty:

@xrobwx - Yeah, Doom 3 was pretty annoying. It tried to do a story but failed; it tried for tension but resorted to cheap tricks, like limiting flashlight use and monsters jumping out of closets; it tried to push graphics but everything ended up looking plasticy with over-the-top shadows, unlike Far Cry. It was thoroughly mediocre, which was disappointing for a company like id Software.

 

I don't have a problem with id Software going down the survival-horror route rather than action-shooter but it has to do it well. If you want to see how tension should be done then you only have to look at games like Amnesia or STALKER. Based on the information released so far I'm concerned that they're going in completely the wrong direction.

  • Like 2

LOL.   So I am young then :)       Thanks!

 

 

Seriously though,  Doom 3 was a bit of a disappointment, and I am not getting my hopes up for new one too much...

 

Doom 3 was not a bad game (not great either). But it was not Doom. I'll never understand why companies don't start a new ip instead of milking an old ip when they want to make something new.

  • Like 1

I don't have a problem with id Software going down the survival-horror route rather than action-shooter but it has to do it well. If you want to see how tension should be done then you only have to look at games like Amnesia or STALKER. Based on the information released so far I'm concerned that they're going in completely the wrong direction.

 

Actually,   Dead Space are more like it for a space marine horror, and, unlike Doom 3, they do it better. 

This topic is now closed to further replies.
  • Posts

    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ah. La Fontana De Incontinentia ! Bella ! Bella !
    • Hi everyone, I'm planning a small network upgrade and was wondering how others prepare their networks for future needs. Do you usually invest in higher-speed switches and better cabling from the start, or do you upgrade only when necessary? I'd be interested in hearing what has worked well for you and any lessons you've learned over time. Thanks!
    • Greetings and welcome!!
  • Recent Achievements

    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
    • Apprentice
      Asgardi went up a rank
      Apprentice
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      93
    5. 5
      macoman
      67
  • Tell a friend

    Love Neowin? Tell a friend!