blocking user agents via IPTables?


Recommended Posts

What proxy are you using. I don't see how you could do with that sort of thing without a proxy, or layer 7 type of firewall. So what are you using to filter/block? Or is this on your server and your wanting to block specific useragents from accessing your service/httpd?

You need Layer 7 support 

 

http://l7-filter.sourceforge.net/ might help with that.

 

If I remember rightly it uses REGEX to match which is a bit of pain to get right (Well that could just be I'm not very good at writing regex patterns)

  On 05/08/2014 at 13:54, BudMan said:

What proxy are you using. I don't see how you could do with that sort of thing without a proxy, or layer 7 type of firewall. So what are you using to filter/block? Or is this on your server and your wanting to block specific useragents from accessing your service/httpd?

correct this is my proxy server (squid), but everyone is going via the server to access the internet so there is a linux machine between the clients and the interwebs so I was going to use IP tables to block everything but (lets say safari) if they are not using safari not forwarding to the interwebs

 

to summarise to clear up confusion

 

user -> server (IPtables->squid) -> internet

in squid its simple acl that matches the UA you want to allow, and deny all others.

acl aclname browser [-i] regexp ...

# pattern match on User-Agent header (see also req_header below) [fast]

acl aclname req_header header-name [-i] any\.regex\.here

# regex match against any of the known request headers. May be

# thought of as a superset of "browser", "referer" and "mime-type"

# ACL [fast]

  On 05/08/2014 at 14:40, BudMan said:

in squid its simple acl that matches the UA you want to allow, and deny all others.

acl aclname browser [-i] regexp ...

# pattern match on User-Agent header (see also req_header below) [fast]

acl aclname req_header header-name [-i] any\.regex\.here

# regex match against any of the known request headers. May be

# thought of as a superset of "browser", "referer" and "mime-type"

# ACL [fast]

ok I will do it this way then thanks :) was actually just trying it out but I cannot seem to get it working... do you have an example (e.g.... MSIE?) or a useful link?

do google for blocking browser useragent squid and you should find a couple of walk thru's - you are running what version of squid? I recall a previous thread with you about squid and you were running really old version - but I think you updated?

  On 05/08/2014 at 15:23, BudMan said:

do google for blocking browser useragent squid and you should find a couple of walk thru's - you are running what version of squid? I recall a previous thread with you about squid and you were running really old version - but I think you updated?

*cough* I am still using squid 2.4 :D I have latest squid 3 on the system from the other thread but for now this one is using 2.4. I will most likely upgrade after I have the browsers blocked

Well 2.4 doesn't have the acls - believe they were added in 2.6, so like that last thread would explain why not working. At a loss to why anyone would be using such an old version?? 2.4 is like 2002 ;)

  On 05/08/2014 at 15:37, BudMan said:

Well 2.4 doesn't have the acls - believe they were added in 2.6, so like that last thread would explain why not working. At a loss to why anyone would be using such an old version?? 2.4 is like 2002 ;)

ah I meant i am using 2.7!? :p I am using the acls for blocking sites, but I cannot seem to get the blocking of browsers, just donot think I know enough about squid to block them/get it working http://gaugusch.at/squid.shtml i tried this guide but seemed to cause me issues

Well that should work then.. But still why not using current 3.4? At a loss why anyone - especially in security area type software would use outdated versions, I can see being a version behind or so.. But 2.7 was released in 2008, and last change I see to that branch was 2011

  On 05/08/2014 at 15:45, BudMan said:

Well that should work then.. But still why not using current 3.4? At a loss why anyone - especially in security area type software would use outdated versions, I can see being a version behind or so.. But 2.7 was released in 2008, and last change I see to that branch was 2011

 

I will be upgrading, very shortly once i work out exactly what I need to do, I do not want to upgrade half way through experimenting for it not to work and me be confused as to why once I have finished this task and have the my prototype setup I will upgrade and will only use squid3 from then on (I also used squid 2.7 caching as squid3 cache refused to work if you remember from my previous post, and I could not seem to solve it) either way! im going to have to keep trying this out

  On 05/08/2014 at 15:45, BudMan said:

Well that should work then.. But still why not using current 3.4? At a loss why anyone - especially in security area type software would use outdated versions, I can see being a version behind or so.. But 2.7 was released in 2008, and last change I see to that branch was 2011

got it working! (upgrading tomorrow)

  On 05/08/2014 at 16:39, BudMan said:

so what were you doing wrong for the next guy that might have same sort of issue?

ah good point probably should say, thank you for reminding me.

 

the httpd_accel comman in the guide was not liked by squid in a very much shortened version of his guide assuming you can connect via the proxy just put this in under acl CONNECT method CONNECT line tested on an older MSIE version and it 403 errored tried it on chrome worked fine

 

acl CONNECT method CONNECT

acl ie_browser browser ^Mozilla/4\.0 .compatible; MSIE 

acl bad_browser browser ^Gator

http_access deny bad_browser

http_access deny ie_browser

http_access allow manager localhost #you will have this bold config already in place do not copy this over your working config

http_access deny manager

http_access deny !Safe_ports

http_access deny CONNECT !SSL_ports

http_access deny to_localhost

http_access allow localhost

http_access deny all

http_reply_access allow all

icp_access allow all

cache_mgr hostmaster@mycompany.at

append_domain .mycompany.at

deny_info ERR_IEBROWSER ie_browser

wccp_router 172.16.0.1

ie_refresh on

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It's a 3v3 fighting system which Mortal Kombat has never done, unless you are talking about the hitstop animation and so on
    • Apple's future is glass-centric, and the new glassy UI is just the beginning  by Hamid Ganji Apple will unveil its overhauled UI experience at today’s WWDC event. The new UI will be available on all Apple devices, including iPhones, iPads, and Mac devices, and it will take most of its cues from visionOS. Bloomberg’s Mark Gurman has now provided us with new details about Apple’s new UI. The new interface is called Liquid Glass and has “sheen and see-through visuals of a glassy surface.” The name represents Apple’s approach to designing the new interface. The new UI also brings “transparency and shine effects in all of Apple’s tool bars, in-app interfaces and controls.” However, Gurman notes that the Liquid Glass interface will lay the groundwork for Apple’s future products, especially the 20th anniversary iPhone. It was already reported that Apple plans to unveil at least two new devices in 2027, which coincides with the iPhone’s 20th anniversary. The first model would be the long-awaited foldable iPhone. However, the second model, the 20th anniversary iPhone, is a glass-centric model that aligns with Apple’s new UI concept. According to Gurman, the 20th anniversary iPhone has curved glass sides and edges. It also features “extraordinarily slim bezels” and “no cutout section in the screen.” The phone is reportedly called “Glasswing,” which refers to the type of butterfly with transparent wings. Apple’s upcoming iOS 26 is the biggest overhaul to iPhone UI since the launch of iOS 7 in 2013. The new UI also hits iPadOS 26, tvOS 26, visionOS 26, watchOS 26, macOS 26. As a side note, the new “26” on the name of Apple’s operating system represents the year 2026.
    • Listen, adrynalyne - You're trolling me (I've known this for months). If you have something meaningful to say - say it, don't ask as if you know something, becauser you know sh*t. Ok?
  • Recent Achievements

    • Week One Done
      Al_ earned a badge
      Week One Done
    • Week One Done
      MadMung0 earned a badge
      Week One Done
    • Reacting Well
      BlakeBringer earned a badge
      Reacting Well
    • Reacting Well
      Lazy_Placeholder earned a badge
      Reacting Well
    • Dedicated
      Epaminombas earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      475
    2. 2
      +FloatingFatMan
      273
    3. 3
      ATLien_0
      242
    4. 4
      snowy owl
      211
    5. 5
      Edouard
      182
  • Tell a friend

    Love Neowin? Tell a friend!