Recommended Posts

Hi everyone, I've got an issue that I hope someone can enlighten me on.

 

I have a 64GB SanDisk Cruiser Fit USB drive that I copy my music too (in .mp3 format) and then use in my car.  My Radio can see the USB drive and plays the music directly from it.  I format this drive to FAT32 (the only file system the car can read) using an external tool.

 

I have about 6500 track on it, with 119 folders.  Everything is organized by Artist.  The car IS ABLE to see and play everything perfectly.

 

MY ISSUE: When I add a NEW FOLDER, the car never sees it (yet my PC does).  However, if I add mp3's to a folder that already exists, the car DOES see and plays them fine.  So, whenever I add a new artist (folder), I need to RE-FORMAT the drive, then copy everything, including the new folder, back to the drive.  Once this is done the car sees the new artist along with the older stuff.

 

The process of re-formatting and re-copying 6500+ tracks takes about 3 hours and is a real pain.  I don't understand why the car doesn't see folders added but does see tracks added to existing folders.

 

I use the RidgeCrop Format tool (http://www.ridgecrop.demon.co.uk/) with a 4096 allocation size, each time I need to reformat the USB drive.

 

Any help would be appreciated.

Hello,

 

Have you tried changing the disk volume's label or serial number to see if that forces the car stereo to reindex the USB flash drive?

 

Also, you might want to check with the car stereo manufacturer for a firmware update (or report this as a bug).

 

Regards,

 

Aryeh Goretsky

I have had similar problems with my media device. The problem there was that the ASUS media player created a temp file that stored the listings of the USB when it was first inserted into the media player, after that, even if I added new media, it will not show it, until I formatted the drive. I then started deleting that temp file whenever I added new content, and it worked normally.

 

Once you have a fresh copy of media stored on the USB, unhide all folders/files to make sure there are no hidden folders/files on the drive, after that plug it in your car stereo, play a few songs randomly, disconnect, and connect back to the computer and see if you can any hidden files that are created, if yes then deleted them should solve it for you.

I have had similar problems with my media device. The problem there was that the ASUS media player created a temp file that stored the listings of the USB when it was first inserted into the media player, after that, even if I added new media, it will not show it, until I formatted the drive. I then started deleting that temp file whenever I added new content, and it worked normally.

 

Once you have a fresh copy of media stored on the USB, unhide all folders/files to make sure there are no hidden folders/files on the drive, after that plug it in your car stereo, play a few songs randomly, disconnect, and connect back to the computer and see if you can any hidden files that are created, if yes then deleted them should solve it for you.

 

REALLY!!!!  Ok, thank you!  I never would have looked for a temp file created my my radio.  I'll check it out tonight.

I DO have "show all files" enabled on my PC, but I wonder if this is a system file, which is still hidden with "hide protected operating system files".

Was this file placed on the root of your device, or in a custom folder?

 

Thanks again!

Hello,

 

Have you tried changing the disk volume's label or serial number to see if that forces the car stereo to reindex the USB flash drive?

 

Also, you might want to check with the car stereo manufacturer for a firmware update (or report this as a bug).

 

Regards,

 

Aryeh Goretsky

I have only changed the volume label to try to get this to work. No dice.  

Also, it looks like there is a newer firmware version out there, but they are in the "replacement radios" and are not being applied to existing units.  ...which means I'm stuck with what I have.  Although, my unit works perfectly with exception to this isuue. ...which I think is more my issue than the unit's.

REALLY!!!!  Ok, thank you!  I never would have looked for a temp file created my my radio.  I'll check it out tonight.

I DO have "show all files" enabled on my PC, but I wonder if this is a system file, which is still hidden with "hide protected operating system files".

Was this file placed on the root of your device, or in a custom folder?

 

Thanks again!

 

Your welcome, I hope this solves it for you. The file was placed in the root of the USB. What you can do is copy a few music files to the USB and then connect it to the radio, skip through a few tracks, and then check on your computer.

Hey everyone, I have an update.

I found no additional files on the USB drive.  However, after turning on "Show Protected System Files", I saw a System Volume folder with a file inside.

I am unable to delete the folder or the file.  I can edit the contents of the file in notepad (looks like a serial number) but afterwards the car still doesn't show a folder I added as a test.

 

I really appreciate everyone's input.  Sadly, no dice.

I'm starting to wonder if the allocation size I format the drive to is an issue.  I choose 4096 each time.  (as I'm formatting a 64gb drive to fat 32)

I don't think it will be saved as a system file, just a regular hidden file. Try skimming through your folders and sort files by extension. The index file should stick out like a sore thumb amongst your mp3 files. Check the folder that would come first in alphabetical order. Failing that, try a wildcard search of your USB thumb drive for any .txt file or .dat file

I don't think it will be saved as a system file, just a regular hidden file. Try skimming through your folders and sort files by extension. The index file should stick out like a sore thumb amongst your mp3 files. Check the folder that would come first in alphabetical order. Failing that, try a wildcard search of your USB thumb drive for any .txt file or .dat file

Hi JJ,

I did try that and came up with nothing.  The only additional file on drive is the System Volume.

Hello,

 

I found a nice little write-up on changing the volume serial number here:  http://www.codeproject.com/Articles/5825/Changing-volume-s-serial-number

 

Perhaps that will be of use.

 

Regards,

 

Aryeh Goretsky

 

 

 

  • 5 months later...

Most car radios are dumb.  They scan a new device once its detected but not again.  Would it be easier to unplug your radio fuse and reprogram the radio stations?

I've had good luck with the BMW iDrive system. I use MediaMonkey to sync music to a 64 GB flash drive. Works flawlessly - I just create playlists in MediaMonkey, and the car recognizes those. Additionally, the iDrive system has a folder browser, so I can navigate to a specific folder and start playing tracks from there. It recognizes new tracks (or artists/albums/playlists) without any problems.

 

@OP, I recommend MediaMonkey to sync to the flash drive. 

  • 5 months later...

Try using AAC instead of MP3, MP3's are not good audio files.  If your car can play WAV format it is a losses format(big files).  Try not using so many folders. 

example: Beatles\Number 1's.  Instead copy music into one folder\Beatles-Number1's.  This way there will be less folders to read, less confusing. 

I am big into audio, I use WAV files in my car.  I understand that everyone may not be anal about sound.  AAC files are better than MP3's.  Don't convert MP3's into AAC files.  Just burn your CD into AAC files.  If you are using iTunes under preferences, advance change settings to AAC.  You can also select not to use VBR(don't use VBR).  Also select 256, 320 does not give you better sound.

 

Ciao.

  • 2 months later...

I am having a similar problem.  I have ripped some CDs into my computer, and then synched them to a flash drive to use in my car.  Some of the songs from the CDs show up and play just fine with the album cover, name of the song and artist, but others do not play at all.  When I go to the menu and select a song from that particular album, I get a symbol of a USB connection for a second or two on the display screen, and then nothing at all.  Song does not play, no name of artist, etc.

I have been using Windows Media Player to create the flash drive files, so that does not seem to be the problem, since all the songs play and show the title on my computers, and some of them play and show information on my car's display, but others do not.

Any suggestions.  I am using .wma format, and my flash drive is 32gb.  I am not even close to using 1gb yet due to this problem. 

I was hoping to put most or all of my CDs onto a flash drive since my newest auto a 2015 Prius only holds one CD at a time in the player unlike my 2010 Camry that holds up to 4 CDs at once.  Also a flash drive would save a lot of space compared to 50 or more CDs.  Adding a hard wired CD changer is out of the question since this car is leased, and after 3 years may exchange it for another car. 

Any help or suggestions will be most appreciated.  I am not a computer geek or techie, so do not overwhelm me with technical jargon.

BTW have tried two different brands of flash drives.  Same result on both.  Have also tried Windows Media Player on two different computers, same results there, so problem does not seem to be WMP, computers, or flash drives. 

Booda

 

 

 

 

 

 

  • 1 year later...

Hi Guys ! I got a multimedia in my car ! 

i would listen to music via usb flash , I upload some mp3 or wav or flac, but the multimedia loads all of the music twice ! I have tied everything but still not change !

thanks 

Keszi

Edited by keszi
  • Jason S. locked this topic
This topic is now closed to further replies.
  • Posts

    • TeraCopy 4.0 Build 26 by Razvan Serea TeraCopy is a compact program designed to copy and move files at the maximum possible speed, also providing you with a lot of features. Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. Pause and resume transfers. Pause copy process at any time to free up system resources and continue with a single click. Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer. Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files. Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual. TeraCopy is free for non-commercial use only. For commercial use you need to buy a license. The paid version of the program includes the following features: Copy/move to your favorite folders. Save reports as HTML and CSV files. Select files with the same extension/folder. Remove the selected files from the copy queue. TeraCopy 4.0 Build 26 changelog: Added support for receiving files via the LocalSend protocol. Improved exception handling and automated bug report upload. Fixed several minor bugs and small memory leaks. Build 26 (June 24) Fixed a rare exception when a transfer completed. Features added since version 3.17: Enhanced speed graph. New multi-threaded copy engine. Support for copying to multiple targets. Queue system for managing multiple copy operations. Support for receiving files via the LocalSend protocol. TeraCopy entry in the modern Windows Explorer context menu. Integrated toolbar in the title bar. Why receive LocalSend transfers with TeraCopy? Handle file conflicts: Skip, overwrite, or rename files when a file with the same name already exists. LocalSend always creates another copy, which can waste time and disk space, especially when resuming an interrupted transfer. Filter unwanted files: Apply ignore lists or remove files manually before accepting a transfer, so unnecessary files are not downloaded. Better performance on fast networks: In tests over a 10 Gbps connection, TeraCopy received files several times faster than the standard LocalSend app on Windows. Download: TeraCopy 4.0 Build 26 | 14.5 MB (Freeware, paid upgrade available) View: TeraCopy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Briefly used Turbo Pascal (and Turbo C++) in 97 and soon after that I bought PC magazine that included a full version of Delphi 2. I still use Delphi today, some 29 years later.
    • Age of Empires Mobile comes to PC, here's how to carry over progress from your phone by Ivan Jenic Image: YouTube/Microsoft Microsoft just released Age of Empires Mobile for PC. The game, officially called Age of Empires Mobile: PC Edition, is available for free on Steam and Microsoft Store, almost two years after its initial release for handheld devices. Age of Empires is one of those franchises that entire generations grew up with. The original came out in 1997, and immediately got people hooked to building civilizations and crushing their enemies on the battlefield. However, the franchise today is a far cry from its roots, as Age of Empires Mobile is, well, a game optimized for handheld devices, and not a classic RTS title we’ve all loved for years. And, of course, it includes in-game purchases. The PC version is still a mobile game at its core, but it’s been optimized for desktop play. There’s mouse control, full keyboard compatibility, and a refined UI. Microsoft also refreshed the visuals with some 4k textures, so the game should look better on larger screens. The game supports Crossplay, so you can switch between your phone, tablet, and PC without losing anything. But linked progress doesn’t come out of the box, as you have to enable it first. Here’s how to link your progress: On your mobile device, open Age of Empires Mobile. Go to Settings (Gear icon) > Account. Select Bind Account and choose a sign-in option. Once you enable account binding, sign in on PC using the same method, and your progress will be accessible across all your devices. Xbox Game Pass subscribers also get a bonus reward pack on PC, which includes: 1 Monthly Pass Token 1 Custom Resource Chest 10 Universal 60-Minute Speed-Ups 1,000 Empire Coins Exclusive Player Portrait Frame You can find more info about Age of Empires Mobile: PC Edition, as well as download links, on the Age of Empires official website.
    • Apple Watch Series 11 GPS just crashed to 30% off in this fast-moving Prime Day deal by Karthik Mudaliar The Apple Watch Series 11 is available for $279, down from its $399 list price, saving buyers $120, or 30%. Amazon labels the offer as selling fast, so the current price may not remain available for long. This GPS model features a 42mm aluminum case, an Always-On Retina LTPO3 OLED display capable of reaching up to 2,000 nits, and an Ion-X glass surface with improved scratch resistance. Apple rates Series 11 for up to 24 hours of normal use or up to 38 hours in Low Power Mode, with fast charging providing up to eight hours of use from a 15-minute charge. Health and fitness tools include sleep scoring, temperature sensing, ECG support, heart-rate alerts, workout tracking, sleep apnea notifications, and hypertension notifications, where available. The watch also carries IP6X dust resistance and 50-meter water resistance. This configuration is best suited to iPhone owners who want comprehensive health tracking, notifications, contactless payments, and workout data without stepping up to a larger or cellular-equipped model. The smaller case should also appeal to buyers who prefer a lighter watch, while the S/M band fits wrists measuring 130mm to 180mm. With the current generation now significantly below its usual retail price, this is a strong time to replace an aging Apple Watch or buy a first model without compromising on Apple’s newest health and display features. Grab the discounted Apple Watch Series 11 (sold and shipped by Amazon) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!