Recommended Posts

Hi everyone, I've got an issue that I hope someone can enlighten me on.

 

I have a 64GB SanDisk Cruiser Fit USB drive that I copy my music too (in .mp3 format) and then use in my car.  My Radio can see the USB drive and plays the music directly from it.  I format this drive to FAT32 (the only file system the car can read) using an external tool.

 

I have about 6500 track on it, with 119 folders.  Everything is organized by Artist.  The car IS ABLE to see and play everything perfectly.

 

MY ISSUE: When I add a NEW FOLDER, the car never sees it (yet my PC does).  However, if I add mp3's to a folder that already exists, the car DOES see and plays them fine.  So, whenever I add a new artist (folder), I need to RE-FORMAT the drive, then copy everything, including the new folder, back to the drive.  Once this is done the car sees the new artist along with the older stuff.

 

The process of re-formatting and re-copying 6500+ tracks takes about 3 hours and is a real pain.  I don't understand why the car doesn't see folders added but does see tracks added to existing folders.

 

I use the RidgeCrop Format tool (http://www.ridgecrop.demon.co.uk/) with a 4096 allocation size, each time I need to reformat the USB drive.

 

Any help would be appreciated.

Hello,

 

Have you tried changing the disk volume's label or serial number to see if that forces the car stereo to reindex the USB flash drive?

 

Also, you might want to check with the car stereo manufacturer for a firmware update (or report this as a bug).

 

Regards,

 

Aryeh Goretsky

I have had similar problems with my media device. The problem there was that the ASUS media player created a temp file that stored the listings of the USB when it was first inserted into the media player, after that, even if I added new media, it will not show it, until I formatted the drive. I then started deleting that temp file whenever I added new content, and it worked normally.

 

Once you have a fresh copy of media stored on the USB, unhide all folders/files to make sure there are no hidden folders/files on the drive, after that plug it in your car stereo, play a few songs randomly, disconnect, and connect back to the computer and see if you can any hidden files that are created, if yes then deleted them should solve it for you.

I have had similar problems with my media device. The problem there was that the ASUS media player created a temp file that stored the listings of the USB when it was first inserted into the media player, after that, even if I added new media, it will not show it, until I formatted the drive. I then started deleting that temp file whenever I added new content, and it worked normally.

 

Once you have a fresh copy of media stored on the USB, unhide all folders/files to make sure there are no hidden folders/files on the drive, after that plug it in your car stereo, play a few songs randomly, disconnect, and connect back to the computer and see if you can any hidden files that are created, if yes then deleted them should solve it for you.

 

REALLY!!!!  Ok, thank you!  I never would have looked for a temp file created my my radio.  I'll check it out tonight.

I DO have "show all files" enabled on my PC, but I wonder if this is a system file, which is still hidden with "hide protected operating system files".

Was this file placed on the root of your device, or in a custom folder?

 

Thanks again!

Hello,

 

Have you tried changing the disk volume's label or serial number to see if that forces the car stereo to reindex the USB flash drive?

 

Also, you might want to check with the car stereo manufacturer for a firmware update (or report this as a bug).

 

Regards,

 

Aryeh Goretsky

I have only changed the volume label to try to get this to work. No dice.  

Also, it looks like there is a newer firmware version out there, but they are in the "replacement radios" and are not being applied to existing units.  ...which means I'm stuck with what I have.  Although, my unit works perfectly with exception to this isuue. ...which I think is more my issue than the unit's.

REALLY!!!!  Ok, thank you!  I never would have looked for a temp file created my my radio.  I'll check it out tonight.

I DO have "show all files" enabled on my PC, but I wonder if this is a system file, which is still hidden with "hide protected operating system files".

Was this file placed on the root of your device, or in a custom folder?

 

Thanks again!

 

Your welcome, I hope this solves it for you. The file was placed in the root of the USB. What you can do is copy a few music files to the USB and then connect it to the radio, skip through a few tracks, and then check on your computer.

Hey everyone, I have an update.

I found no additional files on the USB drive.  However, after turning on "Show Protected System Files", I saw a System Volume folder with a file inside.

I am unable to delete the folder or the file.  I can edit the contents of the file in notepad (looks like a serial number) but afterwards the car still doesn't show a folder I added as a test.

 

I really appreciate everyone's input.  Sadly, no dice.

I'm starting to wonder if the allocation size I format the drive to is an issue.  I choose 4096 each time.  (as I'm formatting a 64gb drive to fat 32)

I don't think it will be saved as a system file, just a regular hidden file. Try skimming through your folders and sort files by extension. The index file should stick out like a sore thumb amongst your mp3 files. Check the folder that would come first in alphabetical order. Failing that, try a wildcard search of your USB thumb drive for any .txt file or .dat file

I don't think it will be saved as a system file, just a regular hidden file. Try skimming through your folders and sort files by extension. The index file should stick out like a sore thumb amongst your mp3 files. Check the folder that would come first in alphabetical order. Failing that, try a wildcard search of your USB thumb drive for any .txt file or .dat file

Hi JJ,

I did try that and came up with nothing.  The only additional file on drive is the System Volume.

Hello,

 

I found a nice little write-up on changing the volume serial number here:  http://www.codeproject.com/Articles/5825/Changing-volume-s-serial-number

 

Perhaps that will be of use.

 

Regards,

 

Aryeh Goretsky

 

 

 

  • 5 months later...

Most car radios are dumb.  They scan a new device once its detected but not again.  Would it be easier to unplug your radio fuse and reprogram the radio stations?

I've had good luck with the BMW iDrive system. I use MediaMonkey to sync music to a 64 GB flash drive. Works flawlessly - I just create playlists in MediaMonkey, and the car recognizes those. Additionally, the iDrive system has a folder browser, so I can navigate to a specific folder and start playing tracks from there. It recognizes new tracks (or artists/albums/playlists) without any problems.

 

@OP, I recommend MediaMonkey to sync to the flash drive. 

  • 5 months later...

Try using AAC instead of MP3, MP3's are not good audio files.  If your car can play WAV format it is a losses format(big files).  Try not using so many folders. 

example: Beatles\Number 1's.  Instead copy music into one folder\Beatles-Number1's.  This way there will be less folders to read, less confusing. 

I am big into audio, I use WAV files in my car.  I understand that everyone may not be anal about sound.  AAC files are better than MP3's.  Don't convert MP3's into AAC files.  Just burn your CD into AAC files.  If you are using iTunes under preferences, advance change settings to AAC.  You can also select not to use VBR(don't use VBR).  Also select 256, 320 does not give you better sound.

 

Ciao.

  • 2 months later...

I am having a similar problem.  I have ripped some CDs into my computer, and then synched them to a flash drive to use in my car.  Some of the songs from the CDs show up and play just fine with the album cover, name of the song and artist, but others do not play at all.  When I go to the menu and select a song from that particular album, I get a symbol of a USB connection for a second or two on the display screen, and then nothing at all.  Song does not play, no name of artist, etc.

I have been using Windows Media Player to create the flash drive files, so that does not seem to be the problem, since all the songs play and show the title on my computers, and some of them play and show information on my car's display, but others do not.

Any suggestions.  I am using .wma format, and my flash drive is 32gb.  I am not even close to using 1gb yet due to this problem. 

I was hoping to put most or all of my CDs onto a flash drive since my newest auto a 2015 Prius only holds one CD at a time in the player unlike my 2010 Camry that holds up to 4 CDs at once.  Also a flash drive would save a lot of space compared to 50 or more CDs.  Adding a hard wired CD changer is out of the question since this car is leased, and after 3 years may exchange it for another car. 

Any help or suggestions will be most appreciated.  I am not a computer geek or techie, so do not overwhelm me with technical jargon.

BTW have tried two different brands of flash drives.  Same result on both.  Have also tried Windows Media Player on two different computers, same results there, so problem does not seem to be WMP, computers, or flash drives. 

Booda

 

 

 

 

 

 

  • 1 year later...

Hi Guys ! I got a multimedia in my car ! 

i would listen to music via usb flash , I upload some mp3 or wav or flac, but the multimedia loads all of the music twice ! I have tied everything but still not change !

thanks 

Keszi

Edited by keszi
  • Jason S. locked this topic
This topic is now closed to further replies.
  • Posts

    • Turbo Pascal was my first real programming experience more than 30 years ago at university. I mostly taught myself from the included examples and help documentation, because the university only taught the basic syntax and philosophy of Pascal, without going deeply into Turbo Pascal’s advanced features. I still remember when I discovered that I could embed assembly language directly into Pascal code, call BIOS functions, manipulate screen memory, use mouse interrupts, and control peripherals from my programs. That opened huge doors for me. Programming back then felt really fun, direct, and close to the machine. What I loved about Pascal was its readability and the almost instant compile time. Turbo Pascal was an amazing environment, but unfortunately Turbo Pascal for Windows 3 did not feel like it fully carried that legacy forward. Later, Delphi got things back on the right track after the messy transition to TP for Windows. Sadly, Delphi suffered from years of uncertainty as it moved from Borland to CodeGear and then to Embarcadero. That instability made many developers lose confidence in it, even though Delphi itself remained a powerful and productive tool. I still work with Delphi from time to time, but I definitely miss the old days of Turbo Pascal.
    • I hope this encodes in to AV1 or AV2 as currently tiktok uses h265 and h264.
    • Qualcomm reportedly in talks to build custom video chips for TikTok parent ByteDance by Karthik Mudaliar Qualcomm is reportedly in advanced discussions to provide custom chip-design services to Chinese tech giant ByteDance, the same company behind TikTok. According to a report from Reuters, Qualcomm could be involved in designing custom silicon tailored for ByteDance's massive data-center workloads. If it goes through, the deal would make ByteDance one of Qualcomm's early anchor customers for its fastly growing custom chip-design division, For years, Qualcomm was the king of making smartphone processors and modems. The company has also been moving into the PC ecosystem and other formats such as on-device AI for Android XR headsets. However, this particular deal is about Qualcomm's custom Application-Specific Integrated Circuits (ASICs). For a platform like TikTok, ByteDance needs hardware that can help it ingest, process, and serve billions of short-form videos daily. Generalised hardware is no longer the most cost-effective and efficient route, which is why ByteDance is trying to develop custom Video Processing Units (VPUs). VPUs designed specifically for ByteDance’s algorithmic needs could drastically reduce data-center power consumption and improve encoding speeds at an unprecedented scale. The underlying tech behind these processors is actually from Qualcomm's recent acquisition of AlphaWave Semi, a high-speed connectivity specialist company. By combining AlphaWave’s high-bandwidth IP with Qualcomm’s architectural expertise, the company could begin mass production by the end of 2026, if the talks go through. All this also comes at a time when U.S.-China tech relations have dwindled. Escalating trade frictions between Washington and Beijing have severely impacted the export of high-end AI chips from U.S. firms like Nvidia, AMD, and Lam Research. Yet, the Qualcomm-ByteDance discussions show that U.S. tech companies are still actively seeking growth avenues and are open to doing business with China, where regulators still permit. Reuters notes that the outcome of this deal could be uncertain, and ByteDance might also seek partners other than Qualcomm. via Reuters | Image via DepositPhotos.com
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      456
    2. 2
      +Edouard
      164
    3. 3
      PsYcHoKiLLa
      117
    4. 4
      Michael Scrip
      83
    5. 5
      Xenon
      69
  • Tell a friend

    Love Neowin? Tell a friend!