Recommended Posts

Hi everyone, I've got an issue that I hope someone can enlighten me on.

 

I have a 64GB SanDisk Cruiser Fit USB drive that I copy my music too (in .mp3 format) and then use in my car.  My Radio can see the USB drive and plays the music directly from it.  I format this drive to FAT32 (the only file system the car can read) using an external tool.

 

I have about 6500 track on it, with 119 folders.  Everything is organized by Artist.  The car IS ABLE to see and play everything perfectly.

 

MY ISSUE: When I add a NEW FOLDER, the car never sees it (yet my PC does).  However, if I add mp3's to a folder that already exists, the car DOES see and plays them fine.  So, whenever I add a new artist (folder), I need to RE-FORMAT the drive, then copy everything, including the new folder, back to the drive.  Once this is done the car sees the new artist along with the older stuff.

 

The process of re-formatting and re-copying 6500+ tracks takes about 3 hours and is a real pain.  I don't understand why the car doesn't see folders added but does see tracks added to existing folders.

 

I use the RidgeCrop Format tool (http://www.ridgecrop.demon.co.uk/) with a 4096 allocation size, each time I need to reformat the USB drive.

 

Any help would be appreciated.

Hello,

 

Have you tried changing the disk volume's label or serial number to see if that forces the car stereo to reindex the USB flash drive?

 

Also, you might want to check with the car stereo manufacturer for a firmware update (or report this as a bug).

 

Regards,

 

Aryeh Goretsky

I have had similar problems with my media device. The problem there was that the ASUS media player created a temp file that stored the listings of the USB when it was first inserted into the media player, after that, even if I added new media, it will not show it, until I formatted the drive. I then started deleting that temp file whenever I added new content, and it worked normally.

 

Once you have a fresh copy of media stored on the USB, unhide all folders/files to make sure there are no hidden folders/files on the drive, after that plug it in your car stereo, play a few songs randomly, disconnect, and connect back to the computer and see if you can any hidden files that are created, if yes then deleted them should solve it for you.

I have had similar problems with my media device. The problem there was that the ASUS media player created a temp file that stored the listings of the USB when it was first inserted into the media player, after that, even if I added new media, it will not show it, until I formatted the drive. I then started deleting that temp file whenever I added new content, and it worked normally.

 

Once you have a fresh copy of media stored on the USB, unhide all folders/files to make sure there are no hidden folders/files on the drive, after that plug it in your car stereo, play a few songs randomly, disconnect, and connect back to the computer and see if you can any hidden files that are created, if yes then deleted them should solve it for you.

 

REALLY!!!!  Ok, thank you!  I never would have looked for a temp file created my my radio.  I'll check it out tonight.

I DO have "show all files" enabled on my PC, but I wonder if this is a system file, which is still hidden with "hide protected operating system files".

Was this file placed on the root of your device, or in a custom folder?

 

Thanks again!

Hello,

 

Have you tried changing the disk volume's label or serial number to see if that forces the car stereo to reindex the USB flash drive?

 

Also, you might want to check with the car stereo manufacturer for a firmware update (or report this as a bug).

 

Regards,

 

Aryeh Goretsky

I have only changed the volume label to try to get this to work. No dice.  

Also, it looks like there is a newer firmware version out there, but they are in the "replacement radios" and are not being applied to existing units.  ...which means I'm stuck with what I have.  Although, my unit works perfectly with exception to this isuue. ...which I think is more my issue than the unit's.

REALLY!!!!  Ok, thank you!  I never would have looked for a temp file created my my radio.  I'll check it out tonight.

I DO have "show all files" enabled on my PC, but I wonder if this is a system file, which is still hidden with "hide protected operating system files".

Was this file placed on the root of your device, or in a custom folder?

 

Thanks again!

 

Your welcome, I hope this solves it for you. The file was placed in the root of the USB. What you can do is copy a few music files to the USB and then connect it to the radio, skip through a few tracks, and then check on your computer.

Hey everyone, I have an update.

I found no additional files on the USB drive.  However, after turning on "Show Protected System Files", I saw a System Volume folder with a file inside.

I am unable to delete the folder or the file.  I can edit the contents of the file in notepad (looks like a serial number) but afterwards the car still doesn't show a folder I added as a test.

 

I really appreciate everyone's input.  Sadly, no dice.

I'm starting to wonder if the allocation size I format the drive to is an issue.  I choose 4096 each time.  (as I'm formatting a 64gb drive to fat 32)

I don't think it will be saved as a system file, just a regular hidden file. Try skimming through your folders and sort files by extension. The index file should stick out like a sore thumb amongst your mp3 files. Check the folder that would come first in alphabetical order. Failing that, try a wildcard search of your USB thumb drive for any .txt file or .dat file

I don't think it will be saved as a system file, just a regular hidden file. Try skimming through your folders and sort files by extension. The index file should stick out like a sore thumb amongst your mp3 files. Check the folder that would come first in alphabetical order. Failing that, try a wildcard search of your USB thumb drive for any .txt file or .dat file

Hi JJ,

I did try that and came up with nothing.  The only additional file on drive is the System Volume.

Hello,

 

I found a nice little write-up on changing the volume serial number here:  http://www.codeproject.com/Articles/5825/Changing-volume-s-serial-number

 

Perhaps that will be of use.

 

Regards,

 

Aryeh Goretsky

 

 

 

  • 5 months later...

Most car radios are dumb.  They scan a new device once its detected but not again.  Would it be easier to unplug your radio fuse and reprogram the radio stations?

I've had good luck with the BMW iDrive system. I use MediaMonkey to sync music to a 64 GB flash drive. Works flawlessly - I just create playlists in MediaMonkey, and the car recognizes those. Additionally, the iDrive system has a folder browser, so I can navigate to a specific folder and start playing tracks from there. It recognizes new tracks (or artists/albums/playlists) without any problems.

 

@OP, I recommend MediaMonkey to sync to the flash drive. 

  • 5 months later...

Try using AAC instead of MP3, MP3's are not good audio files.  If your car can play WAV format it is a losses format(big files).  Try not using so many folders. 

example: Beatles\Number 1's.  Instead copy music into one folder\Beatles-Number1's.  This way there will be less folders to read, less confusing. 

I am big into audio, I use WAV files in my car.  I understand that everyone may not be anal about sound.  AAC files are better than MP3's.  Don't convert MP3's into AAC files.  Just burn your CD into AAC files.  If you are using iTunes under preferences, advance change settings to AAC.  You can also select not to use VBR(don't use VBR).  Also select 256, 320 does not give you better sound.

 

Ciao.

  • 2 months later...

I am having a similar problem.  I have ripped some CDs into my computer, and then synched them to a flash drive to use in my car.  Some of the songs from the CDs show up and play just fine with the album cover, name of the song and artist, but others do not play at all.  When I go to the menu and select a song from that particular album, I get a symbol of a USB connection for a second or two on the display screen, and then nothing at all.  Song does not play, no name of artist, etc.

I have been using Windows Media Player to create the flash drive files, so that does not seem to be the problem, since all the songs play and show the title on my computers, and some of them play and show information on my car's display, but others do not.

Any suggestions.  I am using .wma format, and my flash drive is 32gb.  I am not even close to using 1gb yet due to this problem. 

I was hoping to put most or all of my CDs onto a flash drive since my newest auto a 2015 Prius only holds one CD at a time in the player unlike my 2010 Camry that holds up to 4 CDs at once.  Also a flash drive would save a lot of space compared to 50 or more CDs.  Adding a hard wired CD changer is out of the question since this car is leased, and after 3 years may exchange it for another car. 

Any help or suggestions will be most appreciated.  I am not a computer geek or techie, so do not overwhelm me with technical jargon.

BTW have tried two different brands of flash drives.  Same result on both.  Have also tried Windows Media Player on two different computers, same results there, so problem does not seem to be WMP, computers, or flash drives. 

Booda

 

 

 

 

 

 

  • 1 year later...

Hi Guys ! I got a multimedia in my car ! 

i would listen to music via usb flash , I upload some mp3 or wav or flac, but the multimedia loads all of the music twice ! I have tied everything but still not change !

thanks 

Keszi

Edited by keszi
  • Jason S. locked this topic
This topic is now closed to further replies.
  • Posts

    • Nvidia GeForce NOW gains support for Dark Scrolls, Empulse, and more by Pulasthi Ariyasinghe The final update of June for Nvidia's cloud gaming service GeForce NOW is now available, and it is touting support for six more games. The company is also drawing subscriber attention towards the summer sales kicking off across stores, so they can stock up on more cloud-supported titles. Of course, the Steam Summer Sale is the biggest promotion, which is kicking off later today. "Supported Steam games can be streamed across devices with GeForce NOW, making it easy to buy a game once, keep progress synced and pick up where the gameplay left off on PCs, Macs, handheld devices, phones, TVs and more," says the company. "In other words, the Steam Summer Sale brings the deals; GeForce NOW adds the flexibility." Don't forget that the GeForce NOW summer sale is still active as well. This limited-time offer drops the 12-month Performance membership from $99.99 to $64.99, saving members $35. At the same time, the 12-month Ultimate membership is currently going for $129.99, dropping the price by $70 from the original $199.99. Here are the games joining GeForce NOW's supported list this week: Dark Scrolls (New release on Steam, available June 22) SAND: Raiders of Sophie (New release on Steam, available June 22) Deer & Boy (New release on Steam, available June 23) EMPULSE (New release on Steam, available June 24) The Adventures of Elliot: The Millennium Tales (Steam) FATAL FURY: City of the Wolves (Steam) With the June expansions coming to an end, Nvidia should be announcing its July GeForce NOW plans next week. Keep in mind that, unlike subscription services like Game Pass or EA Play, a copy of a game must be owned by the GeForce NOW member (or at least have a license via PC Game Pass) to start playing via Nvidia's cloud servers. There is also a limit to how many hours subscribers can use the service per month.
    • Davinci Resolve 21.0.1 by Razvan Serea DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool! Its elegant, modern interface is fast to learn and easy for new users, yet powerful for professionals. DaVinci Resolve lets you work faster and at a higher quality because you don’t have to learn multiple apps or switch software for different tasks. That means you can work with camera original quality images throughout the entire process. It’s like having your own post production studio in a single app! Best of all, by learning DaVinci Resolve, you’re learning how to use the exact same tools used by Hollywood professionals! DaVinci Resolve is the only post production software designed for true collaboration. Multiple editors, assistants, colorists, VFX artists and sound designers can all work on the same project at the same time! Whether you’re an individual artist, or part of a larger collaborative team, it’s easy to see why DaVinci Resolve is the standard for high end post production and is used for finishing more Hollywood feature films, episodic television programing and TV commercials than any other software. Davinci Resolve 21.0.1 release notes: Addressed multiple DNG and Apple ProRAW color issues. Addressed issue with automatic smart bins after deleting keywords. Addressed issue with multiple linked audio in media management. Addressed multiple Resolve FX issues in photo page. Addressed issue with key shortcut to switch viewer in photo page. More consistent creation of new photo albums. Addressed color thumbnail refresh for photo transform indicator. Transcription now honors project settings language. Improved face recognition in IntelliSearch. Addressed exported bins not retaining generator and title properties. Addressed ease control display and sensitivity issues. Addressed keyframe issue when copying clips with Fusion effects. Addressed keyframe refresh for Fusion effects in the edit page. Addressed issue with 3D renders in Linux with non-English locales. Addressed Fusion viewer color issue for some RCM settings. Addressed issue with saturation limits in Fusion gradient controls. Addressed Fusion display issues with dual screen layouts. Addressed issue with non-English character inputs in Linux. Disabling MultiMaster now disables trim blanking controls. Addressed crash in some scenarios with CineFocus. Addressed lag when toggling bypass grades and Fusion effects. Addressed occasional issue with Fairlight loudness meters. Addressed data burn display of good take tag in upgraded projects. Addressed project manager scroll lag for large project libraries. Support for Sony Alpha 7R VI ARW RAW stills. Support for decoding Affinity RGB 16-bit formats. Addressed a color issue with MainConcept H.265 HDR renders. Addressed a color issue with Windows native H.265 HDR renders. RemoveMotionBlur API now uses correct encode parameters. Addressed character limit consistency in GenerateSpeech API. General performance and stability improvements. Download page: Davinci Resolve 21.0.1 | 3300 MB (Free, paid upgrade available) Links: DaVinci Resolve Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • There are so many of these apps now that do this, what do people recommend?
    • Just the price of doing business. The scamble to pull as much from the web as possible is happening, and it's happening before a case like this changes how or what is legal do to with AI in terms of data harvesting. But even then as we've seen with the likes of Google who ignore cookie requests and just accept the fact they'll get fined, it's built into their business price model now. AI is here, its not going away. Their reward if any from the court case would be best suited to trying to incorprate AI or licence their end points as authentic human verified content. The problem is, as we've seen these same news papers are using AI themselves.
  • Recent Achievements

    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!