Access HDD with NTFS Partition and TimeCapsule


Recommended Posts

Hello friends,

 

I'm having an issue trying to access my external HDD that I connected to my Time Capsule.

 

Basically, what I want is to have my extra external HDD of 1TB to be accessible via Finder, so I can manage the files manually.

 

This is my setup:

MacBook Pro, OS X Mavericks.

TimeCapsule 2TB currently used for Time Machine

Extra External HDD 1TB (the one I want to use to store manually my personal data)

 

Note: the HDD is NTSF format, I know Time Capsule supports FAT32 and other format of Mac. HOWEVER I have files that are around 8GB size or so on, that I need to backup and FAT32 does not support that file size sadly. I also have some Virtual Machines I want to manually backup, but FAT32 file size is a problem.

 

Any solution or ideas for this?

 

 

Thanks in advance

From the sounds of it the issue is that your mac isn't reading the NTFS drive? The odd thing is that it should support reading of an NTFS partition without an issue, normally writing is the problem. For that you can look for NTFS-3G which should resolve the problem.

I've just looked at my Time Capsule partition and it's formatted to HFS+? I don't think that has the same restrictions as FAT32...

Well, my external HDD is connected via USB to the Time Capsule. Not directly connected to the Mac. Basically I want to be able to access my HDD wireless.

 

Note: when I connect my HDD directly to the macbook pro, no issues at all, I can navigate into the folders and files without issues.

 

Probably this helps to clarify my issue.

Oh wait, are you talking about the Airport Time Capsule, rather than just using any HDD to save your Time Capsule data?

Hmm, I've not used the Airport Time Capsule before, although I do see that it mentions that you should be able to share a HDD through it. That doesn't explain why it can't read the drive though, seeing as - as I mentioned earlier - Mac should be able to read NTFS without an issue.

I'll have a look around and see if I can find something.

EDIT: Found it, although you're not going to like the answer, I'm afraid. According to this you can only browse an External HDD connect to your Time Capsule if it is formatted in Mac's Extended Journal file system.

Interesting that you mention that, as over the past few days I've been strugging with file systems. I own a Mac, I'm currently using Linux, and everyone I know normally uses Windows. Because of that I've been trying to find a file system that everything would recognise. The only real solution is either NTFS or UDF (and UDF is a pain for me to deal with at the second, but that's another matter.)

However, for your particular situation neither file system will work. You'll have to switch it to Mac Extended if you want to connect to it through Time Capsule.

  On 12/08/2014 at 19:10, Nick H. said:

Interesting that you mention that, as over the past few days I've been strugging with file systems. I own a Mac, I'm currently using Linux, and everyone I know normally uses Windows. Because of that I've been trying to find a file system that everything would recognise. The only real solution is either NTFS or UDF (and UDF is a pain for me to deal with at the second, but that's another matter.)

However, for your particular situation neither file system will work. You'll have to switch it to Mac Extended if you want to connect to it through Time Capsule.

 

Yeah. Seems like there is no other way sadly.

 

I'll try to research in the dark world so see if I can find a hint or something.

 

Thanks for the help.

  On 12/08/2014 at 18:56, Nick H. said:

Oh wait, are you talking about the Airport Time Capsule, rather than just using any HDD to save your Time Capsule data?

Hmm, I've not used the Airport Time Capsule before, although I do see that it mentions that you should be able to share a HDD through it. That doesn't explain why it can't read the drive though, seeing as - as I mentioned earlier - Mac should be able to read NTFS without an issue.

I'll have a look around and see if I can find something.

EDIT: Found it, although you're not going to like the answer, I'm afraid. According to this you can only browse an External HDD connect to your Time Capsule if it is formatted in Mac's Extended Journal file system.

Then that is a HARDWARE restriction of the Airport itself - I have a Netgear WNDR3700v4 with a USB port, and I can access any USB drive connected to it, as long as it is in a format that OS X recognizes, and yes, that includes NTFS.

 

While I can't WRITE to an NTFS partition without a third-party utility (such as Paragon NTFS), that's fine - that means I can download files in Windows, and use them on OS X - without having to worry about cross-OS file corruption.

 

I'm more concerned about another issue that could cause conniptions - using a MyBook as a backup destination for both OSes, with a single drive split into two partitions - one NTFS for Windows and one HFS+ for OS X.

 

Since the MyBook won't be a boot drive, can this work?

  On 12/08/2014 at 19:10, Nick H. said:

Interesting that you mention that, as over the past few days I've been strugging with file systems. I own a Mac, I'm currently using Linux, and everyone I know normally uses Windows. Because of that I've been trying to find a file system that everything would recognise. The only real solution is either NTFS or UDF (and UDF is a pain for me to deal with at the second, but that's another matter.)

However, for your particular situation neither file system will work. You'll have to switch it to Mac Extended if you want to connect to it through Time Capsule.

 

The best solution is exFat.  Windows, Mac, and Linux all can write and right to that file format.

  On 12/08/2014 at 20:07, PGHammer said:

I'm more concerned about another issue that could cause conniptions - using a MyBook as a backup destination for both OSes, with a single drive split into two partitions - one NTFS for Windows and one HFS+ for OS X.

 

Since the MyBook won't be a boot drive, can this work?

I can only comment on what I have tried in the past. I had a 3TB External HDD split in to two partitions: One is HFS+ (for Time Capsule) and the other was in ExFat. Time Capsule had no problem backing up to the HFS+ partition, and Mac had no problem reading ExFat.

So yes, you should be able to do that without a problem. (Y)

 

 

  On 12/08/2014 at 20:08, #Michael said:

The best solution is exFat.  Windows, Mac, and Linux all can write and right to that file format.

I agree, and as I mentioned in my reply to PGHammer I had an External HDD formatted in ExFat which worked between Windows and Mac without an issue. Once I started using Linux though, something went screwy with the permissions and Linux no longer allowed me to write to the ExFat partition. A few guys on Neowin and myself tried various things for a majority of the day before I gave up.

I've now formatted the ExFat patition to NTFS, that seems to have the least problems across all the systems. But again, that is my problem that I'm facing, not the problem of this discussion. ;)

  On 12/08/2014 at 20:50, acido00 said:

exFat supports larger file sizes? and if you say that it is supported in windows and Mac and Linux, then that is perfect.

 

Can I format it then using Disk Utility?

Well hang on, read what I wrote again. Yes, all three OS's are supposed to be able to read and write ExFat (using FUSE, I think) but I did have problems when it came to Linux. We still aren't sure exactly what caused it, but it may have been to do with disconnecting the drive without properly ejecting it. Who knows, It's not my problem anymore. :p

ExFat supports larger file sizes, yes. But again, in your situation you'll be better off sticking with NTFS (at least, in my opinion.) It won't fix your problem with the Airport Time Capsule, but neither will changing the filesystem to ExFat.

Airport Time Capsule will only read the Mac Extended Journaled file system. There doesn't seem to be two ways about it, I'm afraid.

  On 12/08/2014 at 20:54, Nick H. said:

Well hang on, read what I wrote again. Yes, all three OS's are supposed to be able to read and write ExFat (using FUSE, I think) but I did have problems when it came to Linux. We still aren't sure exactly what caused it, but it may have been to do with disconnecting the drive without properly ejecting it. Who knows, It's not my problem anymore. :p

ExFat supports larger file sizes, yes. But again, in your situation you'll be better off sticking with NTFS (at least, in my opinion.) It won't fix your problem with the Airport Time Capsule, but neither will changing the filesystem to ExFat.

Airport Time Capsule will only read the Mac Extended Journaled file system. There doesn't seem to be two ways about it, I'm afraid.

 

oh! I misunderstood then. OK, I'll follow your suggestion then.

 

Thanks.

exFAT is totally stable between OS X, Win and Linux. I use many drives for cross platform talk. For time machine you will need to use HFS+ but for everything else you can use exFAT. OS X writes natively to exFAT and the stupid 4GB File limit is gone and it can handle up to 16T file sizes now.

  On 12/08/2014 at 21:08, Sikh said:

exFAT is totally stable between OS X, Win and Linux. I use many drives for cross platform talk. For time machine you will need to use HFS+ but for everything else you can use exFAT. OS X writes natively to exFAT and the stupid 4GB File limit is gone and it can handle up to 16T file sizes now.

Again, I would have agreed before I moved to Linux. However, Linux will need a third party driver to read-write ExFat. OS X was the same until 10.6.5. (source)

And again, ExFat was working fine for me on Linux until...well, until it didn't. It didn't have a problem reading the drive, just writing to it. But again, that could have been something that I did wrong, and isn't the topic of the conversation. ;)

Maybe I'll start a discussion about file systems. There are lots of variations out there, each with their own pros and cons. For this thread though, acido00 is best of leaving his drive with the NTFS file system as far as I can see.

  On 12/08/2014 at 21:24, Nick H. said:

Again, I would have agreed before I moved to Linux. However, Linux will need a third party driver to read-write ExFat. OS X was the same until 10.6.5. (source)

And again, ExFat was working fine for me on Linux until...well, until it didn't. It didn't have a problem reading the drive, just writing to it. But again, that could have been something that I did wrong, and isn't the topic of the conversation. ;)

Maybe I'll start a discussion about file systems. There are lots of variations out there, each with their own pros and cons. For this thread though, acido00 is best of leaving his drive with the NTFS file system as far as I can see.

 

You should definitely start a conversation on file systems. All the linux builds ive used based off debian or arch and read exFat fine. We have ubuntu and centOS servers at work and they all read and wrtie to exFAT drives fine. I dont know many Snow Leopard which is why its not a thought in my mind when I mention exFAT is supported.

 

im looking for to this file system dicussion thread!

I think, I have an idea. Is it possible to create a partition probably of 1GB using (exFat or Fat32) and then the rest using the MAC OSX Format (HFS+)? this way when I connect it to my Airport Time Capsule it can be detected and I can write on it wireless

 

Any tutorial or guide?

 

I think if I can make it that way, I can put on the 1GB partition software like "MacDrive" or any other free that will allow me to read on Windows the HFS+ format, so basically I can install it on windows when needed and I can access the information.

 

What do you think?

Ok maybe I am missing something - why are you using ntfs, you don't list any windows machines - did I miss that?

Why don't you just format the disk in your mac book pro with apple filesystem, quite sure that supports large file sizes. Even really old 10.0 to 10.1 supports 2TB, etc.

  On 14/08/2014 at 14:41, BudMan said:

Ok maybe I am missing something - why are you using ntfs, you don't list any windows machines - did I miss that?

Why don't you just format the disk in your mac book pro with apple filesystem, quite sure that supports large file sizes. Even really old 10.0 to 10.1 supports 2TB, etc.

 

yes, it should wrok on windows machines.

  On 14/08/2014 at 12:47, acido00 said:

I think, I have an idea. Is it possible to create a partition probably of 1GB using (exFat or Fat32) and then the rest using the MAC OSX Format (HFS+)? this way when I connect it to my Airport Time Capsule it can be detected and I can write on it wireless

 

Any tutorial or guide?

 

I think if I can make it that way, I can put on the 1GB partition software like "MacDrive" or any other free that will allow me to read on Windows the HFS+ format, so basically I can install it on windows when needed and I can access the information.

 

What do you think?

So your Fat32 drive would have the installion file for Macdrive which you could then use on any machine to make the machine read an HFS+ partition, while the rest of the drive would be formatted in HFS+, allowing you to access those files through Time Capsule?

I can't see a problem with it in theory, although if you choose to do that you will have to have administrator rights on any machine that you wanted to connect your HDD to, in order to install the software.

As for a guide, what are you looking for? Any partition tool (GParted, for example) should be able to partition the drive for you and format each partition without an issue. Remember that it will format the drive though, so backup your data first!

  On 14/08/2014 at 16:56, Nick H. said:

So your Fat32 drive would have the installion file for Macdrive which you could then use on any machine to make the machine read an HFS+ partition, while the rest of the drive would be formatted in HFS+, allowing you to access those files through Time Capsule?

I can't see a problem with it in theory, although if you choose to do that you will have to have administrator rights on any machine that you wanted to connect your HDD to, in order to install the software.

As for a guide, what are you looking for? Any partition tool (GParted, for example) should be able to partition the drive for you and format each partition without an issue. Remember that it will format the drive though, so backup your data first!

 

Exactly what you just said is my idea. For admin permissions that is not a problem, wherever I will use my personal external HDD I will have the right permissions.

 

GParted sounds cool. I was also about to give it a try using Disk Utility to perform the partition following this guide: http://hints.macworld.com/article.php?story=20110422113851848

 

It should works as I think.

 

I'm backup up my external HDD, to give it a try and if it works, I'll let you know here on this post.

 

Thanks

If you just want read-only HFS+ access in Windows you can install the HFS+ drivers from Apple's BootCamp package. I use them here to have read-only access to my hackintosh partition.

 

There's an installer here. Basically it just copies the two driver files and sets up the registry. Reboot and your HFS drives should be visible.

Why should it work on windows - you didn't list any windows machines?

doesn't hfs explorer work? http://www.catacombae.org/hfsx.html

There are for sure ways to read and write hfs in windows machines. Why do you just buy another external if you need one for windows - and copy your files over the network to this disk be it ntfs or exfat, etc.

If this devices is going to be connect to your timecap -- then why would you use it for anything else?

  On 14/08/2014 at 19:56, BudMan said:

Why should it work on windows - you didn't list any windows machines?

Because he might want to unplug it, take it somewhere and plug it in to a Windows machine? The same reason I was looking in to UDF a while back.

  Quote

If this devices is going to be connect to your timecap -- then why would you use it for anything else?

Because the HDD isn't being used by Time Capsule as a backup. It's being used to hold files and folders that he would like to access wirelessly. The drive isn't a wireless drive, but he can connect it up to Time Capsule which would make it wireless.
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • NAPS2 (Not Another PDF Scanner 2) 8.2.0 by Razvan Serea NAPS2 is a document scanning application with a focus on simplicity and ease of use. Scan your documents from WIA- and TWAIN-compatible scanners, organize the pages as you like, and save them as PDF, TIFF, JPEG, PNG, and other file formats. NAPS2 creates fully text searchable PDF files that can be imported and indexed within your document management system. NAPS2 is currently available in 40 different languages. NAPS2 key features: Scan documents using WIA- and TWAIN-compatible scanners Scan as many pages as you like from glass or ADF, including duplex support Rotate, flip, remove, and rearrange scanned pages Save as PDF, TIFF, JPEG, PNG, or other file formats Directly email PDFs Search through text included in your PDFs by using optical character recognition (OCR), in any of over 100 languages. Configure brightness, contrast, resolution, and other scan options Save your configurations as profiles to be easily reused later Optional command-line interface (CLI) for automation and scripting MSI installer and application-level configuration available for group policy (GPO) deployment Portable/standalone archives available Translations: English, Català, Čeština, Dansk, Deutsch, Español, Français, Hrvatski, Italiano, Magyar, Nederlands, Polski, Portugues, Russian, Ukrainian, Hebrew NAPS2 8.2.0 changelog: NAPS2 is now available on the Microsoft Store. It costs a small fee to support the developer and provide automatic updates. NAPS2 will continue to be freely available at www.naps2.com Added "Edit with" under the "Image" menu for using an external image editor Added "Share even when NAPS2 is closed" option for Scanner Sharing This will show a system tray icon and restart on login Imported file names are now used as the default file name when saving The "Apply to all selected" checkbox now stays checked Escl: Increased maximum time searching for devices from 5s to 60s Escl: Scanner IPs are now cached for faster and more reliable scanning Windows: Added an arm64 installer Windows: Replaced the "No friendly name" device name from some drivers with "Unknown Scanner" Mac: Fixed an issue where saved files didn't always have the right extension Mac: Disabled the "Apple Mail" email provider when not the default email reader Mac: Updated icons for Split/Combine Linux: Fixed issues with the Save dialog Download: NAPS2 (64-bit) | 43.5 MB (Open Source) Download: Portable NAPS2 8.2.0 | 61.9 MB Link: NAPS2 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I still remember a prediction that in the future, the BIOS will have all the necessary drivers... for any OS. Still not there
    • No mandatory.... Once again the one-way approach (only incentives or only detractors, or as they say 'the carrot or the stick') has proven ineffective.
    • ScreenToGif 2.41.3 by Razvan Serea Screen, webcam and sketchboard recorder with an integrated editor. ScreenToGif is an open source program that lets you to record a selected area of your screen, live feed from your webcam or live drawings from a sketchboard. Afterward, you can edit and save the animation as a gif, apng, video, psd or png image. Also there's the Webcam Recorder and the Board Recorder. Features: Record your screen and save directly to a gif looped animation or a video. Pause and continue to record or start over by discard the recording. Move the window around to record what you want, it stays on top. You can add Text, Subtitles, Title Frames, Borders, Watermarks, Drawings, etc. Crop and Resize. Remove frames that you don't want. Select a folder to save the file automatically or select one before encoding. Add the system cursor to your recording. Very small sized and portable executable. What's new in ScreenToGif 2.41.3: Reduced app size and migrated to .NET 9. It's now easier to see the brush cursor when painting light or dark colors on background of same lightness (Editor and Board recorder). Add possibility of running the app having only newer versions of .NET by @nil4 in #1381 Updated Turkish translation by @luther09 in #1389 Added தமிழ் (Tamil) translation by @TamilNeram in #1387 Updated Greek Translation by @theoasima in #1346 Fixed Importing frames using FFmpeg v7 was getting stuck. Exporting partially using an expression was not following the frame ordering. Color picker was not selecting the correct hue. Download: ScreenToGif 64-bit | Portable 64-bit ~7.0 MB (Open Source) Download: ScreenToGif 32-bit | Portable 32-bit Download: ScreenToGif ARM64 | Portable ARM64 View: ScreenToGif Home Page | User Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Explzh 9.77 by Razvan Serea Explzh is a free Windows archive manager for creating, extracting and managing archives. The program supports many different types of archives, including zip, 7z, rar, tar, ace, lzh, arj, cab, iso, img, msi, sfx and more. Apart from archive creation and extraction, you will also be able to verify compressed data for errors, initiate repair routines, split data into multiple items, and more. It additionally allows you to password protect your data and attach digital signatures to files. Key features of Explzh: Explorer-like GUI and operability. LHA, ZIP (ZIPX), JAR, CAB, RAR, TAR, TAR.XXX, 7z, ARJ, WIM, CHM, PE, HFS, NSIS Format Installer, ISO, InstallShield, MSI, and several other formats... Support for more archive formats by introducing the integrated archiver DLL. Self-extracting archive creation function that can create high-performance automatic installers. Digital signature addition function to created self-extracting archive. Office 2007 or later document compression / image optimization re-archiving function. Supports compression and decompression of Unicode file names. Supports compression and expansion exceeding 4GB. AES encryption function. You can create a robust secure ZIP encryption archive. Thumbnail function of image file. In-library file search function. . Equipped with archive file conversion function. File split function. The split file has a self-consolidation function, and can concatenate files larger than 4GB. (No need for batch file or connection software) UU (XX) Encode, Base64 decode function. FTP upload function Supports Windows 11 shell integration extended context menu. Explzh 9.77 changelog: Added a "Reset" button to the [Special Color Settings] in [Options]-[Screen Color]-[Special Colors]. *After resetting, the colors will be set to the ones that AI judges to be most optimal for the current screen mode. Updated to Visual Studio 2022 v.17.14.4. Download: Explzh 64-bit | Explzh 32-bit | ~6.0 MB (Freeware) Download: Explzh ARM64 | 5.9 MB View: Explzh Home Page | Screenshot | Themes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Al_ earned a badge
      Week One Done
    • Week One Done
      MadMung0 earned a badge
      Week One Done
    • Reacting Well
      BlakeBringer earned a badge
      Reacting Well
    • Reacting Well
      Lazy_Placeholder earned a badge
      Reacting Well
    • Dedicated
      Epaminombas earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      477
    2. 2
      +FloatingFatMan
      273
    3. 3
      ATLien_0
      243
    4. 4
      snowy owl
      211
    5. 5
      Edouard
      182
  • Tell a friend

    Love Neowin? Tell a friend!