Computer won't boot after new CPU cooler and gets into reboot


Recommended Posts

I just installed a new CPU cooler. Everything is attached again to my mobo (I think ok - haha)

When booting my PC gets into a loop and I cannot log into Windows. A clicking sound is made and than boots again.

The BIOS can be reached. I already have set everything to its default values, without success.

The CPU is recognized as well as the SSD that boots. The Windows 8.1 bootup screen is displayed and than a loop.

Afterwards the Repair mode is coming up.

What can be the issue for this reboot loop? Have I overlooked something or maybe not connected the right way?

I think it's the PSU dying or already dead... (the PSU is 5 years old and almost constantly on)

damn!

 

The sound is a clicking sound, and my computer gets in a constant reboot.

 

Question is, since I'm already thinking of getting a new PC, will I just get a new PSU or now a complete new PC, mobo/CPU and everything...?!

Don't expect a reply in here in 8 hours.

 

PSU's can often overload components, therefore creating electric whines.

 

Get a new PSU. You can use it for your next build.

I installed the new 860W Corsair PSU.

However, problem is still there.

 

What I see:

- the BIOS is displayed

- the Windows 8 bootcircle

- 2 clicks

- Windows bootcircle continues spinning

- that the reboot

 

After that a screen is displayed "Preparing Automatic Repair" which cannot repair anything....

 

Help! What might be the issue here?

It's a cold boot after a day or so not used. Overheating can still happen than?

Before replacing my CPU cooler Windows did boot normally, although the clicks were still there (that's why I initially replaced only the CPU cooler)

I'd check all your connectors in case something got knocked loose in the process (fans, usb, SATA, whatever,) reset the BIOS, and if still no go reseat the proc and HSF (possible too much pressure, possible too much goo and it got onto the components)

 

920s are twitchy beasts.  I gave up on mine.

 

(If the PSU definitely isn't the problem I'd find a way to check the SSDs too.)

have you tried putting the original cpu cooler back on to see if it boots?

 

with your new cpu cooler did it come pre-applied with thermal paste or did you apply it when you switched out the coolers?

Disconnect the power connection for the new CPU Cooler (Fan?) to the motherboard and then try boot the system.

 

If it fixes the issue its the CPU Cooler.

 

p.s Just disconnect it for testing, don't keep using the computer as the CPU will probably overheat without the cooler with prolonged use.

I had a cooling fan that was plugging into a laptop causing the light to just blink but not turn on. After unplugging the cooling fan the laptop turned on. So maybe the fan is shorting it out or something.

Have you tried booting into safe mode to rule out windows being the problem?

http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/

 

Where are these 'Clicks' coming from? hardware inside? speakers??

 

 

Also, does your graphics card have a separate power feed and is it plugged in correctly?

 

 

Whatever you do, do NOT try and turn on the PC without a heatsink attached.

 

 

Resetting the bios can sometimes also cause more problems. i.e it might disable SATA AHCI and revert to old IDE mode which will make windows fail to load if it is expecting it to be AHCI compatible.

  On 13/08/2014 at 22:12, kiddingguy said:

I just installed a new CPU cooler. Everything is attached again to my mobo (I think ok - haha)

When booting my PC gets into a loop and I cannot log into Windows. A clicking sound is made and than boots again.

What can be the issue for this reboot loop? Have I overlooked something or maybe not connected the right way?

I would triple check the hard drive connections.

 

Both the power connection and data cable -- including the cable to the motherboard.

 

You might swap out the data cable too, in case it is bad.

  On 15/08/2014 at 15:14, f1ux said:

Resetting the bios can sometimes also cause more problems. i.e it might disable SATA AHCI and revert to old IDE mode which will make windows fail to load if it is expecting it to be AHCI compatible.

True, though I'd expect people modding their comp to be aware of that and change it to the right setting, since they had to when they set up the comp in the first place.

  On 15/08/2014 at 14:55, GotBored said:
GotBored, on 15 Aug 2014 - 16:55, said:

Disconnect the power connection for the new CPU Cooler (Fan?) to the motherboard and then try boot the system.

 

If it fixes the issue its the CPU Cooler.

 

p.s Just disconnect it for testing, don't keep using the computer as the CPU will probably overheat without the cooler with prolonged use.

 

I tried this, but the BIOS error I get is that the CPU fan must be connected. No boot at all.

 

The old fan isn't working any more, so that won't be an option.

Tomorrow I will place the CPU once again and see if it's working. In the BIOS it's recognized. I applied the paste myself.

Keep you all posted.

I think it might have something to do with AHCI and IDE and some BIOS setting.

When quickly changing AHCI the clicks were gone, but an error message popped up that My computer/Windows has ran into trouble.

 

I will dig in this further tomorrow.

 

Thanks so far for the feedback!

If you're booting to windows it's not your PSU. The motherboard checks for sufficient power before even attempting to boot. If you have insufficient power, you might just hear fans running. An improperly mounted or insufficient heat sink would cause a thermal shutdown, not a reboot loop into Windows. If the CPU was damaged you wouldn't POST or get past the BIOS. I suspect you're hitting a blue screen in regards to the disk controller and the machine is configured to reboot on stop errors, hence the loop. Can you access the Windows boot options before it loads windows? Can you get into safe mode?

I've seen this issue recently, and it turned out that one of the RAM sticks was loose.  It occurred after cleaning dust out the case, so changing the orientation knocked it loose.

 

Not sure if it's the same issue you're seeing, but it's quick and easy to check.

  On 15/08/2014 at 15:50, kiddingguy said:

I tried this, but the BIOS error I get is that the CPU fan must be connected. No boot at all.

 

The old fan isn't working any more, so that won't be an option.

Tomorrow I will place the CPU once again and see if it's working. In the BIOS it's recognized. I applied the paste myself.

Keep you all posted.

 

That's good, one of the fault conditions which will cause the system to boot cycle (or shutdown) is if the CPU Fan is not detected. Your BIOS gives you a warning message when this happens so its safe to say the fan is being recognized and doesn't have an internal short or open cct which could be causing the failures. Make sure no cables are getting stuck in the fan during operation and that it spins freely and you can rule out the cpu fan.

 

  On 15/08/2014 at 16:09, kiddingguy said:

I think it might have something to do with AHCI and IDE and some BIOS setting.

When quickly changing AHCI the clicks were gone, but an error message popped up that My computer/Windows has ran into trouble.

 

I will dig in this further tomorrow.

 

Thanks so far for the feedback!

 

Does it still try to do a boot cycle or is it staying in Windows now with an error message?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Linux Mint is finally getting native fingerprint login support by David Uzondu In the latest monthly news roundup from the Linux Mint team, the developers announced a feature that users have wanted for a long, long time. The famously user-friendly distribution is finally getting proper, integrated support for fingerprint login. For a distro that has built its reputation on providing a comfortable, "it just works" experience for people new to Linux, the absence of this convenient security feature has been a noticeable gap, especially on modern laptops. The new feature will arrive in Linux Mint 22.2, powered by Fingwit, a brand new XApp built by the Mint developers. It handles detecting your fingerprint reader and recording your prints. Once configured, you can use your fingerprint for the login screen, the screensaver, authenticating sudo commands, and any other administrative actions that pop up a password dialog (pkexec). What makes this particularly interesting is how it deals with situations where a fingerprint just will not work. Fingwit uses fprintd for the backend work, but the Mint devs say its custom authentication module is clever enough to detect tricky cases. For instance, if your home directory is encrypted, you absolutely need your password to decrypt it at login. Just using a fingerprint would lead to a crashed session. Fingwit sees this coming and dynamically prompts for your password instead. The Mint team says Fingwit will be able to run "in any desktop environment and on any Linux distribution." A significant driver for this development has been the team's ongoing work with Framework. Testing the company's hardware has pushed the Mint team to better support the features packed into modern laptops. This partnership is also the reason Mint 22.1 got power profiles and why Mint 22.2 will ship with a newer HWE (hardware enablement) kernel. The team also announced a slew of other changes for the upcoming release. As part of this work, core applications like gnome-calendar, simple-scan (the document scanner), and baobab (the disk usage analyzer) will be upgraded to their newer libAdwaita versions. To solve the long-standing frustration of libAdwaita apps ignoring system themes, the developers have patched the library. Taking it a step further, they have forked it entirely into a new project called libAdapta. On a final, critical note, the team also had a serious warning for users of older versions. The Linux Mint 20.x series, which includes versions 20, 20.1, 20.2, and 20.3, officially reached its End of Life in April 2024. Your system will continue to function, but it will no longer receive any security updates from the official repositories, leaving it vulnerable. The team laid out two options. The recommended path is a fresh installation of a newer release (22.1), which provides support until 2029 and is the cleanest way forward. Alternatively, you can attempt a long and complicated in-place upgrade, which is a multi-step process from 20.x to 21.3.
    • hey all. i recently upgraded my pc: i rma my old motherboard and got a B550 board so i had to get a new cpu.   this is what i have right now. Ryzen 7 5800x( seperate cheap cooler) B550M PRO-VDH MSI 2x16gb DDR4 3600mhz 256GB SSD nvme 1.81TB Games drive 465GB backup Drive 1.36TB Games Drive 2x 2TB MyBook USB Drives RTX 3050 8gb OC Aura case with glass 1000 watt MSI Mag PSU 1650x1050 22" Dell monitor( got it for free off of facebook) everything is canadian prices i might get a 4k monitor next year SO i was planning to get a new gpu then some  items were on sale on amazon canada. Canadian Prices total budget is 864.05   i can either get upgrade too: i would return the cpu, ram(have to anyway) and gpu 5900x( without cooler, will use my cooler that i have here from my old 2700x)- 314.10 ddr4 3600mhz( i have to return them and get another one because there is something wrong with the ram- getting blue screens)-68.33 ASUS Dual Radeon™ RX 7600 EVO OC Edition 8GB GDDR6 -370.79 total 845.26 with 5.00 off amazon coupon   or keep my 5800x with the fan return my gpu and get a better gpu. the rtx 3050 8gb is my current one i have until june 16 to return it.   these are the gpus that i can afford with keeping the cpu with fan but getting new ram. MSI Gaming RTX 5060 8G Shadow 2X OC Graphics Card - 439.99 MSI Gaming GeForce RTX 3060 12GB 15 Gbps GDRR6 - 427.69 ZOTAC Gaming GeForce RTX 4060 8GB Solo DLSS 3 8GB GDDR6 -- 446.20 ASUS Dual Radeon™ RX 7600 EVO OC Edition 8GB GDDR6 - 370.39 Sapphire 11310-01-20G Pulse AMD Radeon RX 6600 Gaming Graphics Card with 8GB GDDR6, AMD RDNA 2- 382.18 Sparkle Intel Arc B570 Guardian OC Graphics Card, 10GB GDDR6- 437.39
    • Wi-Fi 6E in 2025? Why? Everything should have Wi-Fi 7 by now, IMO.
    • OK Microsoft, can you please fire the entire Windows team and hire those 20 Xbox developers instead to work on Windows? We'd all pretty much want to have a light and bloat free Windows!
    • Call of Duty: Black Ops 7 is out this year, landing with a "mind-bending" co-op campaign by Pulasthi Ariyasinghe A surprise Call of Duty announcement landed during the Xbox Game Showcase event today, with Treyarch and Raven Software unveiling Call of Duty: Black Ops 7 as the next entry in the massively popular FPS franchise. While many were expecting the 2025 entry to be a Modern Warfare game, this will be the first time in the history of the series that two Black Ops games will be releasing back to back. Watch the teaser trailer above. Black Ops 7 will be set 40 years after the events of Black Ops 6, taking players to 2035 for a more futuristic experience. "Wielding cutting-edge technology, David Mason and his team must fight back against a manipulative enemy who weaponizes fear above all else," says the company. "The Black Ops universe is amazing. The creativity and imagination that goes into the storytelling, the rich character depth, and the incredible moment-to-moment gameplay across all modes is really exceptional," says Matt Cox, General Manager of Call of Duty. "As a team, our vision from the start was to create a back-to-back series experience for our players that embraced the uniqueness of the Black Ops sub-franchise." In another twist, the complete campaign will be playable in co-op in addition to offering solo play like usual. The story will follow a world that's on the brink of chaos, according to Treyarch, where violent conflicts and psychological warfare are rampant. Of course, a complete multiplayer portion with new maps and weapons, as well as another dose of round-based Zombies in the Dark Aether will be included in the package too. The complete reveal for Call of Duty: Black Ops 7 will be releasing later this year before the full launch The title is coming to PC, Xbox Series X|S, Xbox One, PlayStation 5, and PlayStation 4. Game Pass subscribers are gaining access on day one too.
  • Recent Achievements

    • Dedicated
      Epaminombas earned a badge
      Dedicated
    • Veteran
      Yonah went up a rank
      Veteran
    • First Post
      viraltui earned a badge
      First Post
    • Reacting Well
      viraltui earned a badge
      Reacting Well
    • Week One Done
      LunaFerret earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      472
    2. 2
      +FloatingFatMan
      265
    3. 3
      ATLien_0
      235
    4. 4
      snowy owl
      224
    5. 5
      Edouard
      174
  • Tell a friend

    Love Neowin? Tell a friend!