How much damage can I get hitting a speed bump slightly overspeed?


Recommended Posts

This weekend I took a drive out to Valley Forge Historic Park and while entering a parking lot I hit a very poorly marked speedbump. I was going probably 10 or 15mph over this bump, but the car definitely rocked up and down as I passed it faster than I was intended to...

 

I didn't hear any major scraping or feel anything serious. I looked under the car from the sides (not via a jack or lift) and couldn't see any major damage and I didn't have fluids leaking. The car also seemed to handle the drive back to Philadelphia. But I'm not sure if there is anything I should be checking to see what I could have damaged on this bump.

 

For you more seasoned drivers I'm sure this has happened at least once or twice. What do you normally check for and etc?

Lol, I used to hit those at speed. 

 

No scraping, no problem.  If you do it often though, you will eventually have issues with your shocks/struts.  No big deal just once though.

 

Let me know when you hit a curb, that has some checking to do if you hit above 5mph.  That can really screw your world up (bent tie rods, bent ball joints, steering rack, half shafts, rims...lots of stuff).

Lol, I used to hit those at speed. 

 

No scraping, no problem.  If you do it often though, you will eventually have issues with your shocks/struts.  No big deal just once though.

There was minor scrapping I saw on one side of the car (if I am good at figuring out minor), But I couldn't tell if this was new or not since I purchased the car used a little over 2 weeks ago.

in fact, you can do over them at much faster speed.... and you have to do it repeatedly many many many times, and then over the period of time,

you will finally have tangible results, in loose joints and gearings...

 

 

but it will not show up until many many more high speed hits.    so it is not something you should worry about at all, considering how new your car is.

  • Like 1

did you ride over it or did you side swipe it?

I rode over it. I realized it was the case as the car jumped up and it was too late to do much other than ride it out.

 

in fact, you can do over them at much faster speed.... and you have to do it repeatedly many many many times, and then over the period of time,

you will finally have tangible results, in loose joints and gearings...

 

 

but it will not show up until many many more high speed hits.    so it is not something you should worry about at all, considering how new your car is.

 

Thanks!

Depends on the bump.

There was one in my old home town that was like a rock face, you couldn't go over it at any speed without some nasty sounding noises.

In general though you should be all good.

i rode over big pothole at 50 mph, and had the tire blowout (extreme case -  yet, besides the tire, and the rims balancing, no serious consequence!)

 

tons of speed bump, etc...

 

after 2 year of heavy riding, some thing got a bit loose... and my (honest, not dealership scum) mechanic told me that some of the things are starting to move around, and the total cost to replace is a few hundred.

even then, he said i am good to go for another few month, before replacing, if i want to save money.

cars nowadays are build to handle all kinds of rough treatments, without serious issues, and newer Mercedes are a solid build machines.

 

the only thing is, the dealership mechanics think you are an idiot, and like to charge extra to replace parts that otherwise don't need replacement. 

the parts they can easily resell to the other used car mechanics at a premium.

in fact, it is sickening, just how much scam is happening in car repair world, if you come in uninformed!

 

 

 

 

unless you have free maintenance in your dealership..  i highly recommend you find someone who know cars, or someone who can recommend a trustworthy mechanic who deal in euro cars..

it will save you a ton of money in the long run!  

 

 

i have had BMW and AUDI and in both cases, the dealership i trusted, ripped me off for so much money, i hated it!   i should have went with trustworthy independent from day 1!

i have had BMW and AUDI and in both cases, the dealership i trusted, ripped me off for so much money, i hated it!   i should have went with trustworthy independent from day 1!

 

:/  You know that these dealers charge premium for any work they do outside of warranty, right?  I barely trust the mid tiered dealerships to do anything outside of warranty work.  They like to nickel and dime you to death and go beyond what is wrong to fix the issue. Oh you need an oil change, while I was changing your oil I noticed a hole in your exhaust pipe, it is about 4 inches long, we need to fix that for you....mfer that wasn't there before you got the car, wtf did you hit....nothing sir that was like it when you brought it in....I would think I would notice my car sounding like a truck......

  • Like 1

:/  You know that these dealers charge premium for any work they do outside of warranty, right?  I barely trust the mid tiered dealerships to do anything outside of warranty work.  They like to nickel and dime you to death and go beyond what is wrong to fix the issue. Oh you need an oil change, while I was changing your oil I noticed a hole in your exhaust pipe, it is about 4 inches long, we need to fix that for you....mfer that wasn't there before you got the car, wtf did you hit....nothing sir that was like it when you brought it in....I would think I would notice my car sounding like a truck......

 

exactly..     i cannot believe they would do something like that.   but hell yeah, they DO.

:/  You know that these dealers charge premium for any work they do outside of warranty, right?  I barely trust the mid tiered dealerships to do anything outside of warranty work.  They like to nickel and dime you to death and go beyond what is wrong to fix the issue. Oh you need an oil change, while I was changing your oil I noticed a hole in your exhaust pipe, it is about 4 inches long, we need to fix that for you....mfer that wasn't there before you got the car, wtf did you hit....nothing sir that was like it when you brought it in....I would think I would notice my car sounding like a truck......

oh heck, I still haven't had a steering issue fixed on my car that I bought brand new... 3yrs of warranty work they never fixed the problem... replaced every part of it but the wheel itself, still have a sound coming from the steering system like water running through a hose... they even replaced the steering pump multiple times... never fixed it... took it to another dealer since the independent shops won't look at it as it's a "dealer issue" that dealer went straight to "you need a new steering fluid pump" about banged my head on the desk when I said it's been changed multiple times now that's not the issue!......

Had a VW i owned totalled in AZ for hail damage.  I was able to drive the car home and had to park it at my house while a I wanted a few days for a trailer to come by and pick it up.  So I drove the card hard and went over speed bumps going 45mph.  Didnt damage the car any.

  • Like 1

Had a VW i owned totalled in AZ for hail damage.  I was able to drive the car home and had to park it at my house while a I wanted a few days for a trailer to come by and pick it up.  So I drove the card hard and went over speed bumps going 45mph.  Didnt damage the car any.

only your neck and spine :rofl:

oh heck, I still haven't had a steering issue fixed on my car that I bought brand new... 3yrs of warranty work they never fixed the problem... replaced every part of it but the wheel itself, still have a sound coming from the steering system like water running through a hose... they even replaced the steering pump multiple times... never fixed it... took it to another dealer since the independent shops won't look at it as it's a "dealer issue" that dealer went straight to "you need a new steering fluid pump" about banged my head on the desk when I said it's been changed multiple times now that's not the issue!......

3+ times at the shop for the same thing = lemon law.

3+ times at the shop for the same thing = lemon law.

Oh no... it was never the same thing because they always "fixed it" the problem would slightly change into another problem with the same system so they could get around the issue.. darn dealers and GM dragging their feet for 3yrs until Pontiac was dismantled as a consumer brand... then the dealer started doing the "they no longer exist" excuse even though GM said the warranties were still valid

  • 1 year later...

I found this forum because I was worried about my 2015 WRX. I was switching freeways and was driving 74 mph on the junction. The freeway was smooth until I hit a little bump or something and the car lifted up, not off the ground, and landed hard. I'm just glad I still had control. I'm just worried about premature wear and tear. I always drive fast on that junction, just not the lane I was on.

wheel alignment probably. 

 

how does it feel?  if it were a major issue you would certainly feel it.    On a straight road, like highway, when you take your hands off the wheel does it drift out of the lane?  How fast will depend on how out of whack your alignment is. 

 

If not out of whack, monitor your tire wear on the inside tread and outside tread of each tire.  This may take months to get to a noticeable difference, use a penny or other coin to check depth. 

  • 4 weeks later...

Firstly look where you are going in the future instead of playing with yourself!

 

As for any possible damage, if a US built car (which are all poorly built) there will be a fair bit of damage viz broken springs, muffler blowing, damaged wheel rims.

 

However the single major issue you will have is the chassis frame will be twisted, get it checked now!

Wtf is going on? A 1 poster who somehow found this forum to make a car post and then some other one poster who is trashing all US built cars (even though the first 1 post guy said it was a WRX) and telling the guy he twisted his chassis. Phenomenal.

  • 3 weeks later...
On 2/1/2016 at 2:13 PM, Fingringhoe said:

Firstly look where you are going in the future instead of playing with yourself!

 

As for any possible damage, if a US built car (which are all poorly built) there will be a fair bit of damage viz broken springs, muffler blowing, damaged wheel rims.

 

However the single major issue you will have is the chassis frame will be twisted, get it checked now!

don't know much about cars do you.  If you did you would know that all cars go through vigorous testing to be on the roads in the US.  A speed bump, at any speed, will not twist the frame.  Twisting the frame will require a different kind of impact.  Other things can get twisted, but the frame will not...if it did every car sold in the us would have that issue.  Now you want to talk about overall build quality, rattles, and other issues I have no problems with...that garbage you spewed is garbage. 

 

Lets go onto damaged wheels and rims, american vs everyone else.  This would come down to the the tire build, not the rim or the make of the vehicle, but again a speed bump at any speed will not harm them....now if he hit a curb or a pothole that could swallow the whole front end, well then the rims could get damaged and the tire would likely be blown (seen that happen). 

 

  If you had a low car, you could scrape the under carriage or bend/break something under there...but the likely hood of broken springs aren't so likely even if you hit a speed bump at 100 mph...other parts sure, springs not so much. 

 

So what exactly would break being that the only thing that is plausible in your statement is the muffler.  a arms might get tweaked (a unlikely might), tie rods could be shot, the ball joints may be effected (if hit enough times), the rack could be damaged if hit hard enough, shock/struts could be shot if this is repeated constantly (these will fail way before the springs will), probably screw up your mid pipe/catalytic converters and muffler if it is low enough and you hit it so hard that you really compress your suspension to the point you scrape or hit the speed bump with those parts.  Might screw up your controlling arm.

 

None of these parts are really stronger or weaker on American vs other cars....at least not to the point where they will fall apart.  They all have to pass stringent testing to be able to be put on the roads, all of they have had a model that has been totaled on purpose (yes even the veyron or whatever other expensive car you can think of). 

 

So what really is the issue with American cars, well their quality control is lacking for sure.  You may get squeaks and rattles and computer components that don't last as long as the foreign components which can lead to mechanical failure due to equipment operating out of spec.  This is the reason I will not own a dodge or Chrysler product again regardless of who owns it (fiat or anyone else).  Ford is hit or miss, probably on my last one now....started rattling way too soon.  Government Motors, will not purchase anything from those thieves.   Loved my 2 nissans, and like my toyota.  BMW, Audi and Mercedes do absolutely nothing for me (not really a german car fan), rather have a infiniti, lexus, or acura.  None will really fall apart like in the movies, well except Volkswagen (I swear that whole company puts gremlin eggs in their cars before they leave the assembly plant)....when there is an issue with one of them it is always an electrical issue that can't be tracked down.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AMD 26.6.2 driver brings FSR 4.1 support to RDNA 3 RX 7000 series graphics cards by Pulasthi Ariyasinghe A new driver is rolling out to Radeon graphics hardware owners, and alongside support for new games, AMD has just made its FSR 4.1 upscaling tech available to an entire generation of its products. Last month, AMD announced it is answering community requests to bring FSR 4.1 to past generations of its Radeon graphics cards. This would be starting with RDNA 3 RX 7000 products. Right on schedule, this is what's rolling out now with the AMD Software: Adrenalin Edition 26.6.2 driver containing official support for over 300 games. Following this, AMD is planning to bring out RDNA 2 (RX 6000 series) support for FSR 4.1 sometime in early 2027. As for the games, this Adrenalin 26.6.2 driver is a recommended install for anyone jumping into Ubisoft's upcoming Assassin's Creed Black Flag Resynced remake or id Software's DOOM: The Dark Ages' Revelations expansion. The two fixed issues in this release are these: Intermittent application crash or driver timeout may be observed while playing RoadCraft on Radeon™ RX 7000 series products. Purple screen may be displayed when using an HP Reverb G2 headset with SteamVR on Radeon™ RX 6000 series graphics products. The known issues AMD is still working on are the following: Intermittent application crash or driver timeout may be observed while playing Battlefield 6 on AMD Ryzen AI 9 HX 370. AMD is actively working on a resolution with the developer to be released as soon as possible. Texture flickering or corruption may appear while playing Battlefield 6 with AMD Record and Stream on some AMD graphics products. AMD FSR Upscaling and AMD FSR Frame Generation may show as inactive in AMD Software: Adrenalin Edition while playing Battlefield 6 when enabled on Radeon™ RX 9000 series graphics products. Failure to install may be observed while installing AI Bundle components in some regions with limited access to HuggingFace and GitHub. Model flickering or rendering failure may be observed in Maxon Cinema 4D and Blender on Radeon RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. Intermittent application crash may be observed on some models while running Blender on Radeon RX 7000 and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. The newly released AMD Software: Adrenalin Edition 26.6.2 driver is now available for download from the AMD Software app. Find the official changelog here.
    • How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy —was $28 now FREE by Steven Parker Claim your complimentary copy (worth $28) of "How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy" for free, before the offer ends on June 30. Description In today’s workplace, headlines about artificial intelligence can feel overwhelming. With headlines swinging between promises of utopia and warnings of mass unemployment, for most knowledge workers, the truth feels unclear. In this book, Sharon Gai cuts through the noise. Drawing from real-world examples and global insights, she explains how AI is reshaping the way we work—without hype or fearmongering. Instead of choosing between blind optimism or outright pessimism, she offers a practical, balanced perspective that helps readers make sense of the rapidly evolving AI landscape. You’ll learn how to: Reskill and future-proof your career in the face of AI disruption Identify which parts of your role can be automated, and which require human creativity and judgment Use proven frameworks to evaluate AI’s impact on your work and your organization Apply actionable tips and tools to boost productivity, make smarter decisions, and do more with less Gain clarity as a parent, leader, or professional navigating what this means for the next generation Whether you’re an employee anxious about your future, a parent concerned about your children’s opportunities, or a leader managing a lean team with tight budgets, this book provides the strategies and mindset you need to adapt so you can stop worrying and start preparing. How to download for free Please ensure you read the terms and conditions to claim this offer. Complete and verifiable information is required in order to receive this free offer. If you have previously made use of these offers, you will not need to re-register. Was $28, but is now FREE | Below free offer link expires on June 30. How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy The below offers are also available for free in exchange for your (work) email: The Vibe Coding Playbook: Building Your Tech Business with AI ($35 Value) FREE - Expires 6/23 The Persuasion Engine: How Any Business Can Use AI-Powered Neuromarketing to Understand and Win Customers ($28 Value) FREE - Expires 6/24 How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy ($28 Value) FREE - Expires 6/30 Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms ($131.95 Value) FREE - Expires 7/1 The Complete Free AI Learning: Master ChatGPT, Claude, Gemini & More ($21 Value) FREE How to Build an AI Design Workflow with Gamma ($21 Value) FREE The Ultimate Linux Newbie Guide – Featured Free content Python Notes for Professionals – Featured Free content Learn Linux in 5 Days – Featured Free content Quick Reference Guide for Cybersecurity – Featured Free content We post these because we earn commission on each lead so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin The above deal not doing it for you, but still want to help? Check out the links below. Check out our partner software in the Neowin Store Buy a T-shirt at Neowin's Threadsquad Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: An account at Neowin Deals is required to participate in any deals powered by our affiliate, StackCommerce. For a full description of StackCommerce's privacy guidelines, go here. Neowin benefits from shared revenue of each sale made through the branded deals site.
    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!