Is it worth upgrading to an SSD or SSHD with this PC?


Recommended Posts

My sisters HP desktop PC's (Pavillion p7-1254) hard drive died and I would like to replace it with a faster drive (either an inexpensive SSD or a SSHD) but I don't know with it's motherboard if it will provide an improvement. Does it have to be SATA III to get the benefits? The spec sheet only says SATA so I don't know if it's worth it. I would appreciate your input. Here are the PC's specs:

 

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03135882&cc=us&dlc=en&lc=en

It's not a bad rig all in all.

Is the SSD going to become the OS drive? Because I would say yes, as my dino pc (dual core Athlon 3.2 with 8gb RAM) boots up in half the time it used to take when using a regular hdd (5400 rpm Maxtor I think) and I got a further 12-18 months of use from that rig before building this one.

Thanks! It will be the only drive. She doesn't need a lot of storage space. I figure since I have to change it I might as well get something that will improve its performance. So now the question is if I should get a SSD or SSHD. It's not an expensive PC to begin with so I don't want to go overboard.

 

Any suggestions for a drive? 128GB would be large enough as an SSD. How are the Seagate Momentus XT drives?

I have little knowledge of ssd drives, but I would like to throw in a consideration

The Kingston 128gb drives are decently priced, I'm using one, but as an only drive, it would depend on the amount of use the pc is going to get,

(personally I'd recommend getting a second hdd drive and only having your operating system on the ssd due to the finite read/write nature of ssd's)

Thanks! It will be the only drive. She doesn't need a lot of storage space. I figure since I have to change it I might as well get something that will improve its performance. So now the question is if I should get a SSD or SSHD. It's not an expensive PC to begin with so I don't want to go overboard.

 

Any suggestions for a drive? 128GB would be large enough as an SSD. How are the Seagate Momentus XT drives?

 

Pretty sure that a program like Speccy will tell you the type of SATA interface.

 

If you're going to throw money at an upgrade, and total capacity is not a big issue, then go for SSD rather than a hybrid.

  • Like 1

I would suggest a Samsung EVO. You can get a 120GB pretty cheap (84 bucks on newegg) and I think they come with a 3 year warranty.

 

Make sure you install the Magician software available from the samsung site. This will allow the firmware to be updated and offers other options you can tweak to your liking.

 

Edit: just because some people ask: when you install it, it won't fit in any bay. This doesn't matter, you can just tape it down or use something like blutack/velcro to hold it in place. If the case never gets moved, you mightn't even need to do this. I thought I would add this point in case you bought it and freaked out because it doesn't fit any of the bay sizes. :)

"freaked out because it doesn't fit any of the bay sizes."

 

Just buy an adapter to fit the bay

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16817997013

 

$7, they have dual bays for like $10, etc. etc.  Why would you not do this vs tape??

 

edit:  Here is one for $5

http://www.newegg.com/Product/Product.aspx?Item=N82E16817984021

Tape or any adhesive is a bad idea seeing as the system and SSD operating temps are going to be up to 35C.

 

Just use a single screw in any part of the case to mount the drive? - it's not like the damn thing is bothered about shock issues.

 

Our Hyper-v workstation server at work has 4 SSD's mounted like an oriental fan within the 5.25" enclosure. We're using the area where they would store extra screws within the case, not even the optical mounting points.

So your going to spend say 80$ plus for a SSD, maybe even 200+ depending on size, etc.  And you going to put in your machine with some tape or 1 screw? ;)  WTF people -- 5$ for a proper mount on even 80$ is less then the tax rate in most places ;)  And since your ordering online your saving the tax I would think..

 

Talk about CHEAP!!

  • Like 1

They have no moving parts. Nothing is going to happen to them even if they do move around.

 

I've seen some builds where the SSD is literally just hanging inside the case. 

lol using tape to fasten hard drive... which dimension you coming from buddy :)

If the machine isn't portable and has decent airflow, it should be fine.  Its not my preferred way of doing it, but it won't hurt anything.

lol using tape to fasten hard drive... which dimension you coming from buddy :)

 

 

A small square of double-sided tape would work fine. I'm not suggesting anyone duct tape it inside their case  :laugh:

So your going to spend say 80$ plus for a SSD, maybe even 200+ depending on size, etc.  And you going to put in your machine with some tape or 1 screw? ;)  WTF people -- 5$ for a proper mount on even 80$ is less then the tax rate in most places ;)  And since your ordering online your saving the tax I would think..

 

Talk about CHEAP!!

'Wait until you get a load of me'

:shifty:

I just want to say thanks. I went with the 120GB Samsung drive and an adapter. Amazon had the drive for a few dollars less than Newegg and I'll have it on Tues. I also ordered an adapter, Considering an HHD would cost around $50 to 60, and she doesn't need the higher capacity, for the extra $ I think this is a much better choice.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This seems backwards. You should have to explicitly authorize files for outside use. It shouldn't be the default.
    • Wow you are right, I never even noticed this until you said it! (870E Aorus Master) Before testing this card I had a TP-Link tx401 10GbE PCIe card in that slot (now using XikeStor 310 Thunderbolt to Ethernet adapter).
    • Lack of 5.1 makes this a no sale. What I really wish creative would make would be a USB version that supports 5.1 analog audio for speakers, can switch to headphone mode, and matches the specs of their top tier cards. The current X870E AMD motherboards dont have a great option for adding a PCIE x1 card without cutting down pcie lanes to the graphics card.
    • The Microsoft Office feature that time forgot by Usama Jawad I have been actively using Microsoft Word for the past couple of decades in academic, professional, and personal capacities. Although I used it through the perpetual version of Office apps at the start, I have been an active subscriber of Microsoft 365 Family subscription for over five years now. This means that my Word installation is regularly updated with new features, some of which I don't really like, but that's beside the point. As new features get continuously added, old ones that used to be a staple of Word have started to take a backseat. While I was reminiscing over my Windows experiences from my childhood today, I suddenly remember one such capability that I heavily used in my younger years but have not really touched in over a decade, and haven't seen in documents created by others either. That feature is WordArt. Just to clarify, WordArt is not a Microsoft product specific to Word, and is included in other Office apps like PowerPoint and Excel too. However, Microsoft Word is the app that I used Word Art in heavily, while making assignments or other deliverables for school. If you're unaware, WordArt offers a collection of styling techniques for text, introducing 3D effects like shadows and reflections in the text. It used to be one of the coolest things ever when I was at school and me and my classmates would often compete to ensure that our assignment's title in WordArt was truly the best and stood out above the rest. See some examples of WordArt, still present in the latest versions of Word below: Although WordArt is undeniably cool, it has taken a bit of a backseat, and has been relegated from the Home tab to the Insert toolbar, along with a bunch of other utilities, making it very easy to miss. This isn't exactly surprising because WordArt doesn't really have a place in academic and professional documents anymore, and while I have seen some creatives using it while developing promo material, even that sector has gravitated more towards dedicated graphic designing tools in the past years. For the vast majority of us, WordArt doesn't really exist, and that's alright. At least, it's still an option that can allow us to reminisce our childhood or even make some quick text stylization, if we really need it. Perhaps its usage has waned over time or the novelty has worn off, but I haven't even seen children use it in their academic assignments anymore. In fact, many don't even know that it exists. Maybe that's the fate of every beloved feature. What once felt cutting edge eventually becomes a relic, quietly tucked away as tastes, trends, and technology move on. WordArt may no longer dominate school assignments or decorate the covers of classroom projects, but for those of us who grew up with it, it remains a colorful reminder of a time when making text glow, bend, and cast giant shadows felt like the height of creativity. Hidden behind a few clicks in modern Word, it still survives not as a productivity tool, but as a small piece of computing nostalgia that refuses to disappear.
  • Recent Achievements

    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • One Month Later
      Genuinetonerink- Dubai earned a badge
      One Month Later
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      158
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      70
  • Tell a friend

    Love Neowin? Tell a friend!