Windows XP with chkdsk fail - need data rescue


Recommended Posts

Hello neowinians,

 

I'm looking for help, in a strange matter, well, not so strange, I've had this once before, long-long-time ago. (10+years)

 

I was fixing a hardware issue, I had to replace the PSU, coz the vent was old and very noise. (<--this has prolly nothing to do with the issue)

 

So, after starting up, I had to reset once and do 2 restart, coz I've heavent started the PC since 2-3 weeks, that's long it took me to replace a fan. Also, I had to update a bunch of stuff on it, and ofcource I had to set time, because the battery on the Mobo was empty and no PSU attached that time. Reset due to avast killing my PC, made XP frozen.

 

SUM: 2 restart 1 reset

 

Boot up after...

 

After GRUB loading XP, no sing of booting, PC just restarts after 2-3s of black screen. No message nothing. Again. So I've starter the backup OS, Xubuntu, running just because of "windows 5ucking" hard sometimes and I don't have to search for my liveCD-s.

 

In Xubuntu, I saw the windows xp (C:) drive, but i've to the message I can't access it, coz some1 else is using it. This ofcourse happens sometimes when windows wasn't properly shutdown. Since there is no option to shut down properly, I saw there must be a way around this, and I've done such think once, 10 years or so ago, the question is, how can I access my (C:) drive, without having to solve the windows XP issue.

 

*Sidenote, there a secondary partition beside (C:), with is accessable perfectly, every data is visible and recoverable. Partitions are ofcourse NTFS and not FAT.

 

Meanwhile, back to the windows XP, I was thinking, to boot up a windows xp install disc, to try to solve or restore windows maybe. I've booted into DOS. And started with the a common CHKDSK. And there kinda stopped everything. It took about ages. (2-3 hours) to go a certain percent, and then it sad:

 

post-121358-0-41361500-1415873095.jpg

"The volume appears to contain one or more unrecoverable problems"

 

Also if I try to access the drive, normally, dir /p

 

post-121358-0-75778600-1415873105.jpg

"An error occured during directory enumeration"

 

What's the matter with this partitions, does anyone had this before?

1. Is there anyhow I can access the drive to save my data?

2. Is XP dead for good? No chance to restore, by using restore point or whatever?

the second msg tells you that there is no directory with the name C:\P therefor it cannot enumerate it 

 

the first msg tells you your hdd is probably on it's way out if chkdsk is finding bad sectors it means your hdd has run out of spares to use so it's now showing up where as normally you wouldn't see them.Time to get a new HDD 

After GRUB loading XP, no sing of booting, PC just restarts after 2-3s of black screen. No message nothing. Again. So I've starter the backup OS, Xubuntu, running just because of "windows 5ucking" hard sometimes and I don't have to search for my liveCD-s.

Windows XP certainly sucks hard :huh: But it tends to be a lot worse with damaged drives.

 

You might see what TestDisk can do, not sure what else Linux has for recovery.

the second msg tells you that there is no directory with the name C:\P therefor it cannot enumerate it 

 

the first msg tells you your hdd is probably on it's way out if chkdsk is finding bad sectors it means your hdd has run out of spares to use so it's now showing up where as normally you wouldn't see them.Time to get a new HDD 

 

Oh, thanks, polly I inserted "/" instad or "\". Haven't used DOS command in a while, but before that I've got the same result if I just simply inserted "dir". So, does that also mean, my (C:) there is nothing?

 

Sure. I know that I need a fresh HDD or redo the HDD. But still doesn't help me to rescue data. ;)

 

Back up your data as soon as possible before the drive dies.

 

That's the quest. Thanks.

 

Windows XP certainly sucks hard :huh: But it tends to be a lot worse with damaged drives.

 

You might see what TestDisk can do, not sure what else Linux has for recovery.

 

Nope, since I have no possible way to boot into windows, therefore no TestDisk can be performed. 1st I need to access (C:). That's the 1st step.

"doesn't help me to rescue data."

 

I never understand why this is an issue - were you in the middle of working on a file when it shutdown the first time?  What could possible be on that disk that needs recovery?  Do you not have your critical files backed up?  The number 1 lesson you should take from this is BACKUP your ######!!!

 

Anything of critical nature (can not be recreated) to you, pictures, home videos - files you created (homework, thesis needed for graduation, etc.) needs to be backed up!  There should be nothing in need of rescue when a disk dies..  If there is - your backup plan is in need of work!

 

As to test disk, you can boot that off anything.  You could connect the disk to another system and run it there.  I would run the tools from the maker of the hard drive and see if passes its test, short and long - there is normally some repair features in there.  But I would either connect the drive to another machine, or boot a live CD and pull your files off you want/need if they are still good.

 

The next thing you need to do is work out a backup plan so that if ever a disk fails again its not a problem since your critical stuff is backed up correctly!!

  • Like 2

If all your trying to do it retrieve data and not rescue the system then plug the drive into another PC via a USB adaptor  and access data or repair the partitions from there

 

Or just boot any LiveCD, fire up Testdisk and see if you can recover anything at all (and if the files are valid, because recovering isn't just enough; the files must be 100% valid, not corrupt).

 

And yeah, that's one of the problems of fixing others peoples stuff: it can die any time, so I always ask if there's any backup of the data (so the person knows that it can die while I'm fixing, therefore it's not my responsibility for recovering stuff); if there isn't a valid backup then i just do a backup before even fixing whatever it needs to be fixed.

Additionally I get the impression from the original post that the master boot record or Grub install could have been corrupted ergo the inability to recognize partition data or boundaries.

 

 

*Sidenote, there a secondary partition beside (C:), with is accessable perfectly, every data is visible and recoverable. Partitions are ofcourse NTFS and not FAT.

Please define more clearly the number of drives in the system ,the partitioning and the types thanks.If you installed it on another PC you could used drive manager to give a clearer understanding of whats going on i.e. which partition were visable etc

Additionally I get the impression from the original post that the master boot record or Grub install could have been corrupted ergo the inability to recognize partition data or boundaries.

 

Please define more clearly the number of drives in the system ,the partitioning and the types thanks.If you installed it on another PC you could used drive manager to give a clearer understanding of whats going on i.e. which partition were visable etc

 

Sure. Give me a sec....

 

It's pretty much a classic partition table for dual boot, I don't have the sizes exactly. But it's something like:

20GB NTFS Primary MBR (XP system)

40GB NTFS Primary

 

Rest is about 500MB of a swap partition and rest of the 80GB drive in primary ext3 with the xub.

 

In GRUB there are a bunch of Xub loads, because every kernel update got his little entry + the famous "recovery mode". I think it was around 8 xubuntu entries and on the bottom the windows entry. (generaly was made automatically on the Xub install, it recognized the OS and made and entry, I just adjusted to boot up XP automatically and not Xub, and shortened the delay to 3s)

 

To me, it looks like to correctly go to XP on the boot, because there is a lot of black screen, but I will fire up the GRUB bootlist, and copy paste it. But I'm pretty sure XP is the rotten apple here. As sad, just before the it worked, but I really noticed serious lag, high CPU load, and ofcourse space was running low, etc. I even start a virus scan, coz I tought maybe some virus is the coz. Also anti-malwere. Then, I had to do the reset during the scan. Because it simply got stuck and stayed in 1 place for 1 night. Didn't even bother to restart for overload, etc. No mouse. No key. No HDD led sign, so I thought.

 

 

Or just boot any LiveCD, fire up Testdisk and see if you can recover anything at all (and if the files are valid, because recovering isn't just enough; the files must be 100% valid, not corrupt).

 

And yeah, that's one of the problems of fixing others peoples stuff: it can die any time, so I always ask if there's any backup of the data (so the person knows that it can die while I'm fixing, therefore it's not my responsibility for recovering stuff); if there isn't a valid backup then i just do a backup before even fixing whatever it needs to be fixed.

 

Which live version has testdisk pre-built?

 

"doesn't help me to rescue data."

 

I never understand why this is an issue - were you in the middle of working on a file when it shutdown the first time?  What could possible be on that disk that needs recovery?  Do you not have your critical files backed up?  The number 1 lesson you should take from this is BACKUP your ######!!!

 

Anything of critical nature (can not be recreated) to you, pictures, home videos - files you created (homework, thesis needed for graduation, etc.) needs to be backed up!  There should be nothing in need of rescue when a disk dies..  If there is - your backup plan is in need of work!

 

As to test disk, you can boot that off anything.  You could connect the disk to another system and run it there.  I would run the tools from the maker of the hard drive and see if passes its test, short and long - there is normally some repair features in there.  But I would either connect the drive to another machine, or boot a live CD and pull your files off you want/need if they are still good.

 

The next thing you need to do is work out a backup plan so that if ever a disk fails again its not a problem since your critical stuff is backed up correctly!!

 

True. It's important to back it up, but if you use old "metal" and outdated application, then it makes "on the fly" backup very difficult. But to name some stuff: docs, xls, accounting data, etc. Since the secondery partition the drive is fully in tact, some data is instantly saved. So yeah, this wasn't really planed, that XP will sink down. -_-

 

But I'm not sure. I've used TestDisk recently to restore a lost partition on one of my external HDD's. So did I get you right, system rescue is not possible by any means?! :/

 

If all your trying to do it retrieve data and not rescue the system then plug the drive into another PC via a USB adaptor  and access data or repair the partitions from there

 

Actually, that's not to bad of an idea, but I had in mind, that I prolly still won't be able to access then partition. But YES, definitely worth a try. Will get a PATA 2 USB hub then shortly.

 

TestDisk is an app for pretty much every OS out there.

 

Oh, I didn't know that. Will take a second look at the application then.

Where did I say system rescue wasn't possible?  Why bother is the question?  Your spinning cycles for what?  What is on that that is so important.. If you would of just checked the disk for issues from the maker and if passed redone it you would already be working again.

 

What does it matter the age of the system when it comes to backup of  your critical files??  That is a non sequitur

  • 3 weeks later...

Status: No solutions yet to rescue WinXP

 

Windows on that HDD was completely dead. F8 safe boot options and restore last knows good setting resulted the same, simple restart on boot up.

 

Status: Rescue Data

 

TestDisk, once again saved my ass and all the files, apart from a couple. Hooked up HDD to an external adaptor. Secondery drive was accessable easily. Primary, windows needed time (about 20-30minutes) then it showed up in the drives and could access everything except "Docs and Setting". For that I used TestDisk. Slowly, but could access everything through there.

 

Question: I this HDD completely useless or would a total format, etc help it?

This topic is now closed to further replies.
  • Posts

    • Microsoft releases major feature updates for stock Windows 11 apps by Taras Buria In addition to releasing new Windows 11 preview builds, Microsoft announced that inbox Windows apps now have dedicated release notes in the official documentation. At long last, users have access to all the release notes for each app, with changes listed in chronological order. Microsoft used to announce feature updates for stock apps with each build. Now, with Windows Insider release notes hosted on the Microsoft Learn website, each app has a dedicated space for its changelog, which is very useful for those who want to track new features and improvements. Alongside that, Microsoft dropped massive feature updates for six stock apps: Clock, Media Player, Calculator, Voice Recorder, Photos, and Paint. Each app packs quite a lot of changes and new capabilities, so here are the release notes. Here are quick notes so that you can jump to the app you are interested in the most: Calculator Camera Clock Media Player Paint Photos Sound Recorder Here is what is new for the Calculator in version 11.2605.9.0: More accurate square-root results — Fixed rare cases where a calculation that should equal zero (like sqrt(2.25) - 1.5) returned a tiny leftover value instead. Readable text in High Contrast themes — Settings text now shows the correct colors in the High Contrast Aquatic and Desert themes. Fixed layout for right-to-left languages — For languages like Arabic and Hebrew, the graph, number pad, equation fields, and scroll buttons now appear correctly oriented. Reliable launch after upgrading — Fixed an issue where upgrading from much older versions could leave outdated settings that stopped the app from opening. Here is what is new for the Camera app (version 2026.2605.7.0): Zoom slider works on more cameras — The zoom slider now works on the latest cameras, respects your system zoom settings, and updates instantly when you change those settings. Full range of zoom levels — Fixed an issue where the zoom slider only showed three steps on some devices that zoom in finer increments. Front camera works on more devices — Resolved a problem that blocked the front-facing camera on certain wide-angle devices. More video resolution choices — You can now pick video resolutions that were previously hidden; the app shows a heads-up warning instead of removing them. QR links you can still use — When a scanned QR code points to something with no matching app, the link is now copied to your clipboard (with a notification) while still offering a Store search. Smarter default settings — When you haven't set a preference, the app now follows your system settings by default. The Clock app has a massive changelog with the following improvements in version 11.2605.9.0: Timers keep counting after they hit zero — When a timer runs out, it now keeps counting up (for example, -00:27:31) so you can see how far past the time you've gone. You can turn off the daily goal — Focus Sessions now include an "Off" option so you can skip setting a daily goal entirely. New 15-minute snooze option — Alarms now offer a 15-minute snooze interval. Run up to 3 countdowns at once — The Countdown Widget now supports three simultaneous countdowns, up from two. Timer Widget notifications now appear — Fixed an issue where the "timer finished" notification didn't show when the timer was started from the widget. Less clutter in Focus Sessions — Tasks you've already completed no longer show up in the Focus Session task list. More accurate focus progress — Fixed a rounding issue that could show your daily focus progress as a minute short (for example, 49 minutes instead of 50). Smoother World Clock comparisons — The World Clock compare page now loads dates as you scroll, so it feels more responsive. Up-to-date World Clock locations — Refreshed country and city names to match their current names. Correct sun and moon icons during midnight sun — Fixed an icon that wrongly showed a moon during all-day daylight in polar regions. Fixed back-button behavior in clock comparisons — Pressing back once now takes you back as expected, instead of jumping the date to 1926. Corrected the Newfoundland time zone — Newfoundland now uses the right time zone (St. John's). Disabled alarms stay looking disabled — Editing a turned-off alarm no longer makes it appear turned on. Cleaner timer cards — The expand button is now turned off on timer cards that have no time set, preventing actions that wouldn't do anything. Clearer theme setting — Updated the wording to "Choose your preferred app theme." Smoother Settings links — The "About" links in Settings no longer trigger an unexpected "switch apps" prompt. Fixed spacing in Spotify settings — Corrected uneven spacing in the Spotify settings card. Better focus visibility in High Contrast — The focus highlight in World Clock is now clearly visible in the High Contrast Aquatic and Desert themes. No more double announcements — Screen readers no longer read the timer value twice. Countdown names read correctly — Screen readers now properly announce the name of each countdown. Keyboard focus stays put — Focus no longer disappears after you press the Timer Reset button. Clearer alarm toggle for screen readers — Tidied up how the alarm on/off switch is announced. The Media Player app received plenty of changes as well (version 11.2605.14.0): Custom captions — You can now personalize how closed captions appear, with caption styling tied to your Windows caption settings, plus a quick link to open those settings directly. "Indexing" banner in the play queue — When your media library is still being scanned, a banner now explains why some items may not appear yet. Fixed the look of selected items — Corrected a layout glitch with selected items in lists. Fewer playback failures — Improved how the app recognizes supported file types, so more files play without issues. Playlists need a name — You can no longer accidentally save a playlist with a blank name. Cleaner look for empty playlists — Improved how a playlist appears when it has no items yet. More stable play queue edits — Fixed a crash that could happen when changing the play queue while the app was switching between sessions. Clearer "missing codec" message — Improved the dialog that appears when a file needs a codec you don't have, with clearer guidance on what to do. A big update is also available for Paint in version 11.2605.61.0: Adjustable eraser transparency — You can now control how transparent the eraser is. Cleaner stamp brush strokes — Fixed visible color shifts and artifacts when using stamp-style brushes. JPEG photos save in place — Opening a rotated JPEG and pressing Save now overwrites the original instead of unexpectedly prompting "Save As." No more crash on bad image files — Opening a damaged or invalid image, from within the app, by double click, or commandline, now shows a clear error message instead of closing the app. Classic selection behavior restored — The selection outline now hides while you move, resize, or rotate a selection, just like in classic Paint. Tidier AI image panel — Fixed missing spacing at the bottom of the AI image generation panel for a cleaner layout. Visible button hover in light theme — Toolbar split buttons now show a clear hover highlight in the light theme. Snappier toolbar — Streamlined how the ribbon lays out, giving a small speed boost at startup. Fewer background crashes — Fixed a crash that could happen while background tasks were finishing up. Stable app shutdown — Prevented rare crashes when closing the app. Fixed layer removal glitch — Deleting the active layer no longer leaves the layers list in an inconsistent state. Here is what is new in the Photos app (version 2026.11060.2004.0): AI watermarking — AI-generated or edited images can now carry a visible Copilot watermark. You choose Never, Always, or Ask Every Time in Settings, with a confirmation when saving. The watermarking is off by default in settings. Better viewing of small images and pixel art — Tiny images (like 16×16 pixel art) now zoom in far more to fill the screen and stay crisp instead of looking blurry. Select scanned text with the keyboard — When text is detected in an image, you can now navigate and select it using the arrow keys, Shift+Arrow, Home/End, and Ctrl+A, with a clear focus highlight. Fixed a crash in text recognition — Resolved a crash that could close Photos while detecting text in images; the app now recovers gracefully. Easier keyboard navigation — Tabbing through the navigation bar no longer stops on hidden controls, so it takes a single Tab to move past it instead of three. And finally, here is the Sound Recorder (version 11.2605.1.0): Waveform shows with Bluetooth mics — The live waveform now displays correctly when you record using a Bluetooth audio device. No more stray scrollbar — A non-working horizontal scrollbar no longer appears at the bottom of the waveform unless you've zoomed in. Mark button ready right away — The Mark button no longer looks grayed out until you hover over it after opening the app. Markers hidden for WAV files — Markers are now turned off for WAV recordings, since that format can't store them — so they're no longer lost silently. Smoother deleting — Quickly pressing Delete and Enter to remove several recordings in a row no longer triggers a "file doesn't exist" error. Fixed a memory issue — Resolved a memory leak that occurred each time a recording started. You can find all these changelogs in the official documentation here.
    • again, an article about Microsoft Edge and ridicules hater's comments
    • From this very same article: "For organizations that prefer a “more deliberate pace”, the Extended Stable channel remains an option."
    • Or every other browser, because they all behave the same, at least the mainstream ones. Firefox does exactly the same: background updates, restart to install them. Haters gotta hate, I guess.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      166
    3. 3
      +Edouard
      162
    4. 4
      Steven P.
      85
    5. 5
      ATLien_0
      77
  • Tell a friend

    Love Neowin? Tell a friend!