Show us your Servers - 2015 Edition


Recommended Posts

Welcome to the server photos thread. In this thread you may post pics of your server.

Please be mindful of our members on dial-up and try to keep the dimensions of the pics and the size of the files to a respectable size for 1024 x 768 viewers. Please refrain from quoting images in your replies.

I will also ask that you link to images on your own space, as much as possible.

The usual forum rules also apply.

The last thread can be found here.

Link to comment
https://www.neowin.net/forum/topic/1241720-show-us-your-servers-2015-edition/
Share on other sites

Yeah having a NAS is great for storing media for streaming to htpc's. It's also very handy to have all that extra space for backups and file sharing. I like the easy to use web based OS as opposed to dealing with Windows Server. I will say that I wish there was a good backup solution for such large storage as 30TB. I'd probably shoot myself if I had you're-rip 600 blu Rays.

P.S. What is 100PB?

Edit: Ah, petabytes. ;-)

  • 2 weeks later...
File Server:
Intel i5 2500k Processor
Gigabyte Z77X-D3H Motherboard
8GB Corsair Dominator DDR3-1600
90GB Corsair ForceGT SSD [OS Drive]
20TB usable storage (FlexRAID with 2-drive redundancy, all WD Green 1TB/2TB)
Ceton InfiniTV 4
Rocketfish Case (modded to hold 20 hard drives)
Highpoint DC-7280 Datacenter HBA
Sans Digital TowerRAID 8-bay eSATA Enclosure
Zalman 850w Heatpipe Cooled PSU
WHS 2011
Apps installed: MyMovies Server, Media Center Master, MediaBrowser Server, Ubiquiti UniFi Video Server, FlexRAID RAID-F, Ceton InfiniTV network bridge, Trigone System Monitor, etc. Everything is also setup with remote notifications in case a process stops or a hard drive dies.. I get a text and an email notifying me.
 
PC290013.jpg
 
PC290014.jpg
 
PC290010.jpg
 
flexraid_1-15-2015.png
 
The rack:
3x HTPC's
ProAudioVideo 22u / 1000mm Deep Rack
Belkin PF60 Power Center
Zyxel 24port Gigabit Switch
Asus RT-N16 running DD-WRT (Linux Kernel 3.10.2)
Motorola SB6121
Everything is on a CyberPower 1500VA UPS (about 25mins in a power outage, with PC shutdown scripts via USB)
 
PC290015.jpg
 
PC290021.jpg
 
PC290022.jpg
 
PC290020.jpg
 
HTPC's:
3 of each...
MSI P67A-G43 Motherboard
Intel i3 2100 Processor
PNY 4GB (2x2GB) DDR3-1600 Memory
Corsair Force 3 60GB SSD
Galaxy GTS 450 Graphics Card
NMediaPC Pro-LCD 5.25'' Screen
Corsair CX430 Power Supply
Rosewill R4000 4U Rackmount Case
Monoprice HDMI to Ethernet Converters to the TV's
Monoprice USB to Ethernet to the IR Receivers mounted under the TV's (power up/down of the PC and control WMC)
Recordings all get archived to the WHS via the home server storage plug-in, so the 60GB SSD's are sufficient)
All HTPC's run Win7 x64 with MediaBrowser. They have been tested with almost every media file I have, and the codecs are all setup properly and it runs flawless, including 1080p 3D SBS Blu-ray encodes with FLAC audio. I will be transitioning to Media Browser Theater soon. I've been testing it on my test box computer and it is pretty impressive and I think I have the setup tweaked properly to run everything so I can just copy over the config.
 
IMG_20111008_214108.jpg
 
IMG_20111009_180639.jpg
 
IMG_20111022_174534.jpg
 
IMG_20111022_174545.jpg
 
IMG_20111022_174606.jpg
 
IMG_20111022_174632.jpg
 
And the test server environment.. I'm currently testing SnapRAID under Windows 7 and Windows 8.
 
AMD FX6300 6 Core

GIGABYTE GA-78LMT-USB3 mATX

Crucial 8GB DDR3-1600

Rosewill 600w PSU

MicroFly mATX Case

160GB Maxtor Diamonmax Plus 9 ATA133 HDD (OS Drive)

Sans Digital TowerRAID TR8M+B w/ 6 Seagate 750GB HDDs (Data Volume)
 
test-box.jpg

 

File Server:
Intel i5 2500k Processor
Gigabyte Z77X-D3H Motherboard
8GB Corsair Dominator DDR3-1600
90GB Corsair ForceGT SSD [OS Drive]
20TB usable storage (FlexRAID with 2-drive redundancy, all WD Green 1TB/2TB)
Ceton InfiniTV 4
Rocketfish Case (modded to hold 20 hard drives)
Highpoint DC-7280 Datacenter HBA
Sans Digital TowerRAID 8-bay eSATA Enclosure
Zalman 850w Heatpipe Cooled PSU
WHS 2011
Apps installed: MyMovies Server, Media Center Master, MediaBrowser Server, Ubiquiti UniFi Video Server, FlexRAID RAID-F, Ceton InfiniTV network bridge, Trigone System Monitor, etc. Everything is also setup with remote notifications in case a process stops or a hard drive dies.. I get a text and an email notifying me.
 
 
 
 
 
 
 
 
 
The rack:
3x HTPC's
ProAudioVideo 22u / 1000mm Deep Rack
Belkin PF60 Power Center
Zyxel 24port Gigabit Switch
Asus RT-N16 running DD-WRT (Linux Kernel 3.10.2)
Motorola SB6121
Everything is on a CyberPower 1500VA UPS (about 25mins in a power outage, with PC shutdown scripts via USB)
 
 
 
 
 
 
 
 
 
HTPC's:
3 of each...
MSI P67A-G43 Motherboard
Intel i3 2100 Processor
PNY 4GB (2x2GB) DDR3-1600 Memory
Corsair Force 3 60GB SSD
Galaxy GTS 450 Graphics Card
NMediaPC Pro-LCD 5.25'' Screen
Corsair CX430 Power Supply
Rosewill R4000 4U Rackmount Case
Monoprice HDMI to Ethernet Converters to the TV's
Monoprice USB to Ethernet to the IR Receivers mounted under the TV's (power up/down of the PC and control WMC)
Recordings all get archived to the WHS via the home server storage plug-in, so the 60GB SSD's are sufficient)
All HTPC's run Win7 x64 with MediaBrowser. They have been tested with almost every media file I have, and the codecs are all setup properly and it runs flawless, including 1080p 3D SBS Blu-ray encodes with FLAC audio. I will be transitioning to Media Browser Theater soon. I've been testing it on my test box computer and it is pretty impressive and I think I have the setup tweaked properly to run everything so I can just copy over the config.
 
 
 
 
 
 
 
 
 
 
 
 
 
And the test server environment.. I'm currently testing SnapRAID under Windows 7 and Windows 8.
 
AMD FX6300 6 Core

GIGABYTE GA-78LMT-USB3 mATX

Crucial 8GB DDR3-1600

Rosewill 600w PSU

MicroFly mATX Case

160GB Maxtor Diamonmax Plus 9 ATA133 HDD (OS Drive)

Sans Digital TowerRAID TR8M+B w/ 6 Seagate 750GB HDDs (Data Volume)
 
 

 

 

Good grief, that's sexy!

 

Only thing is that I read that the green drives are high unreliable for RAID environment. Seeing as how you went all out on everything else, why didn't you opt for Red NAS drive?

 

Also, how do you like MediaBrowser? I understand that the server end only runs on windows? I run Kodi on all my clients.

Edited by Haggis
removed pics in quote

I am running software RAID right now (FlexRAID) soon to move to SnapRAID.. so there are no issues. The issues people had with WD Green drives are on hardware RAID. So far it has been very reliable for me for years.

 

As far as Mediabrowser Server, it can run on all sorts of various platforms.. Windows, Linux, Mac, FreeBSD, FreeNAS, and OpenMediaVault. I have mine running on WHS 2011, and I have Android/Kindle/Win8 apps running on my mobile devices as well as MediaBrowser client apps running on the HTPCs. It works seamless and perfect so far. I'd definitely recommend the platform to anybody. I love it. Also, MediaBrowser server supports Kodi now, so you're all set for it to manage your backend metadata and TV tuner plugins.

 

Mindovermaster - I assume you're talking about the rackmount chassis? The HTPC cases are Rosewill R4000 4U rackmount cases and they are housed in the ProAudio 22u/1000mm depth rack.

Case - http://www.newegg.com/Product/Product.aspx?Item=N82E16811147154

Rack - http://www.proaudiostash.com/product/19-inch-rack-cabinets/free-standing-rack-cabinets/pre-assembled-rack-cabinets/19-server-rack-enclosure-600mm/23-62-wide-glass-door/11198.shtml

Instead of showing those 8 pictures again, you quote:

 

 

 

File Server:
Intel i5 2500k Processor
Gigabyte Z77X-D3H Motherboard
8GB Corsair Dominator DDR3-1600
90GB Corsair ForceGT SSD [OS Drive]
20TB usable storage (FlexRAID with 2-drive redundancy, all WD Green 1TB/2TB)
Ceton InfiniTV 4
Rocketfish Case (modded to hold 20 hard drives)
Highpoint DC-7280 Datacenter HBA
Sans Digital TowerRAID 8-bay eSATA Enclosure
Zalman 850w Heatpipe Cooled PSU
WHS 2011
Apps installed: MyMovies Server, Media Center Master, MediaBrowser Server, Ubiquiti UniFi Video Server, FlexRAID RAID-F, Ceton InfiniTV network bridge, Trigone System Monitor, etc. Everything is also setup with remote notifications in case a process stops or a hard drive dies.. I get a text and an email notifying me.
 
<snip>
 
The rack:
3x HTPC's
ProAudioVideo 22u / 1000mm Deep Rack
Belkin PF60 Power Center
Zyxel 24port Gigabit Switch
Asus RT-N16 running DD-WRT (Linux Kernel 3.10.2)
Motorola SB6121
Everything is on a CyberPower 1500VA UPS (about 25mins in a power outage, with PC shutdown scripts via USB)
 
<snip>
 
HTPC's:
3 of each...
MSI P67A-G43 Motherboard
Intel i3 2100 Processor
PNY 4GB (2x2GB) DDR3-1600 Memory
Corsair Force 3 60GB SSD
Galaxy GTS 450 Graphics Card
NMediaPC Pro-LCD 5.25'' Screen
Corsair CX430 Power Supply
Rosewill R4000 4U Rackmount Case
Monoprice HDMI to Ethernet Converters to the TV's
Monoprice USB to Ethernet to the IR Receivers mounted under the TV's (power up/down of the PC and control WMC)
Recordings all get archived to the WHS via the home server storage plug-in, so the 60GB SSD's are sufficient)
All HTPC's run Win7 x64 with MediaBrowser. They have been tested with almost every media file I have, and the codecs are all setup properly and it runs flawless, including 1080p 3D SBS Blu-ray encodes with FLAC audio. I will be transitioning to Media Browser Theater soon. I've been testing it on my test box computer and it is pretty impressive and I think I have the setup tweaked properly to run everything so I can just copy over the config.
 
 
<snip>
 
 
And the test server environment.. I'm currently testing SnapRAID under Windows 7 and Windows 8.
 
AMD FX6300 6 Core

GIGABYTE GA-78LMT-USB3 mATX

Crucial 8GB DDR3-1600

Rosewill 600w PSU

MicroFly mATX Case

160GB Maxtor Diamonmax Plus 9 ATA133 HDD (OS Drive)

Sans Digital TowerRAID TR8M+B w/ 6 Seagate 750GB HDDs (Data Volume)
 

<snip>

 

So if you quote someone, you are not reloading all those pics. Believe me, it really helps the dial-up people, if any.

Love the pictures, great setup!

 

My "servers" are what I can make due with using old hardware :)

 

My file server is an old HP Pavilion specked out as follows: 

 

CPU: Pentium Dual Core E2160

RAM:3GB DDR2

Mobo: Intel 945G based motherboard

Storage: 3 1TB SATA drives in RAID 5

Video: NVidia GeForce 8500 GT

OS: Windows Storage Server 2008 Basic SP2 x86

Data on the RAID 5 array is backed up to an external 2TB USB drive.

 

Its old but it gets the job done as all it does is serve files and media

 

My media server is a slightly newer Dell Inspiron N5040 with a bad display

 

CPU: i3 M390

RAM: 4GB DDR3

Storage: 5400 RPM 500GB

Video: i3 HD onboard

OS: Windows 8.1 Pro x64

This machine runs Plex Media Server along with IIS for my personal playing and development.

Data for Plex is pulled from the file server.

 

Rounding it all out is a DLink DNS-321 NAS with 2 1TB drives in RAID 1 to backup the Dell "server" along with my family's data on their personal laptops.

 

Not real servers but it meets my requirements

Yeah old hardware is perfect for making servers. I had originally put together an AMD FX based server with 4TB and was going to use unRAID. I also tried FreeNAS but both took forever to set up and configure and then to run the parity check. Additionally, I knew that the space would be too small and the hardware was too high end to waste in a server. So, I made it into a gaming PC for my brother and opted for the Synology. I like the Synology because of the terrific web based OS and the ease in creating a volume. It still took days to do the parity check but I just found the setup and maintenance via the OS very easy. That plus the various apps made it a no brainer for me. Another big selling point was the expansion boxes that add 5 drives at a time. I started out with just the Diskstation and as the space filled up, I bought the expansion box and added 5 drives. I'm only 68% full so I don't have to upgrade for some time. The nice thing is that I can keep adding expansion boxes and adding more space. I couldn't figure out a good way to add a lot of space with my own build without trying to find a huge case where I could have 10+ drives. I use my Synology to host all my media for Kodi using SQL for database management plus iTunes server.

 

I only hope that the volume never crashes because it was SO much work to rip all my movies and TV shows. The drive fault tolerance is great and I had 2 drives fail at different times and just had to replace it, run the parity check, and then I was good. Those bad drives were Seagate Barracuda drives. I had someone point out that I'd have much more stability with drives made for NAS's so I opted to gradually switch them all over to WD Red.

mine is just a baby compared to most of yours lol

 

HO Microserver N54L Gen 7

 

Running ESXi 5.5 just now

 

1 vm with Arch Linux for playing about with

1 vm with debian on it which has file storage and plex

 

in the next few week another VM will be added with pfsense

 

 

It will have its normal gigabit port and i am adding a dual gigabit port to it

 

8Gb Ram

and has a little under 2Tb of space just now

 

post-229387-0-18398900-1421693960.jpg

Well here is a screenshot of some of the specs. It is in my loft, some people are asleep and the loft ladder is squeaky - I will go up there tomorrow and get a few photos of it to add to this post. As you can see it is a bit cold tonight in my loft (7C).

 

The server has 64GB extra memory added to make it 72GB now, 8x 1TB midline HP SAS drives, one (240GB?) OCX Vertex 3SATA SDD and an AMD FirePro W7000 graphics card on it for the virtual desktop VMs to share.

 

We use LG CBV42-B Tera2 PCoIP zero clients to connect to the desktop VMs - saves quite a bit of space. It also works well for gaming.

 

post-63221-0-14464100-1421964210.png

post-63221-0-45182900-1421964447.png

 

Pics of the loft of doom to follow.

I finally managed to get a few photos of the mess in my loft. I forgot to take the key for the bezel up there, so I will have to get a photo of the server with the front and side panel removed when I next have to dig out some random item.

 

Most of the equipment:

WP_20150127_20_10_45_Pro.jpg

 

Router/Firewall/AP/AP Controller, Cable Modem, excess cable loop and spilt oil stain (not water from a leak!):

WP_20150127_20_11_25_Pro.jpg

 

Patch panel, spaghetti cable, dumb gigabit switch, smart gigabit Ethernet switch, UPS and part of server:

WP_20150127_20_11_50_Pro.jpg

 

IP PBX, Voicemail, power strip connected to UPS, and the world's shittiest phone:

WP_20150127_20_11_59_Pro.jpg

 

As above with Server:

WP_20150127_20_12_13_Pro.jpg

 

Flashy lights:

WP_20150127_20_12_37_Pro.jpg

 

Three UK Femtocell, bright fluorescent light:

WP_20150127_20_12_59_Pro.jpg

Where did you get your Three Femtocell from?

I called up Three customer services when I was at the pub, explained that I had to go into my garden when at home to make a phone call and asked if they could send me one of their Three Home Signal boxes. The woman explained that I'd have to answer a few questions as it is the standard procedure, then she took some details, played an automatic terms and conditions recording, then the call ended. I still had most of my pint left it was that quick. It arrived the next day.

 

You don't have to register phones to them anymore - any Three mobile will use the signal from the Femtocell when in range. I cant remember if the limit is 20 or 50 devices. It also provides 2G, 3G and 3.5G signals.

I finally managed to get a few photos of the mess in my loft. I forgot to take the key for the bezel up there, so I will have to get a photo of the server with the front and side panel removed when I next have to dig out some random item.

 

 

As a former fellow attic equipment dweller, I would put something over the top of your equipment in case of a leaks / humidity / condensation build up in the roof & arachnids/insects. You'd be surprised at what dies and falls down onto it!

If possible, get it off the caber flooring onto something above floor level too to help against dust/particle build up.

 

Here's my old secondary domain controller / access point as an example (using an old drawer cabinet):

 

post-129876-0-70020600-1422567158.jpg

 

post-129876-0-16501800-1422567162.jpg

As a former fellow attic equipment dweller, I would put something over the top of your equipment in case of a leaks / humidity / condensation build up in the roof & arachnids/insects. You'd be surprised at what dies and falls down onto it!

If possible, get it off the caber flooring onto something above floor level too to help against dust/particle build up.

 

Here's my old secondary domain controller / access point as an example (using an old drawer cabinet):

 

SNIPPED IMAGES

 

That looks like a neat and tidy setup. I like the reusing of an old set of drawers to cover and raise the equipment.

 

I will be using your recommendations and raising/covering the equipment in my loft. It will have to wait a little bit though for now as I have to find a job that I can 'lose' the cost of the materials into. This is going to require some beefy supports! I am also going to have to add a thermostatically controlled extractor fan, as temperatures reach 35C max in the summer up there with no air circulation. I have not had that server there in the summer yet, so I have to get it fitted before then.

 

Have you got a smoke alarm in your loft? I fitted one with a 10 year-life battery in mine the other day just incase something decides to die up there, without killing us at the same time.

I called up Three customer services when I was at the pub, explained that I had to go into my garden when at home to make a phone call and asked if they could send me one of their Three Home Signal boxes. The woman explained that I'd have to answer a few questions as it is the standard procedure, then she took some details, played an automatic terms and conditions recording, then the call ended. I still had most of my pint left it was that quick. It arrived the next day.

 

You don't have to register phones to them anymore - any Three mobile will use the signal from the Femtocell when in range. I cant remember if the limit is 20 or 50 devices. It also provides 2G, 3G and 3.5G signals.

 

I am sure I tried that before and the "Customer Service Agent" had no idea what I was talking about. Granted that was about 2 years ago now.

This topic is now closed to further replies.
  • Posts

    • I'm still on Windows 10 22H2 because I didn't want to deal with all the issues in Windows 11, so I waited almost a week before installing the latest Patch Tuesday update (KB5094127), I went ahead and did it, and it was a huge mistake—ever since then, my File Explorer has seen a performance drop of about 30% when transferring large files... Once again, Microsoft has outdone itself! This update cannot be uninstalled, either through the Control Panel (via Settings) or by accessing Advanced Startup Options. The only possible alternative would be to use system restore points, but I’d have to reinstall all app and driver updates (and there’s no guarantee it would work). Or there’s the “nuclear option” of a in-place repair without losing files or apps, but even then, all my customizations would be lost! Microsoft just can’t help but mess everything up! Way to go, Microsoft! But I still don’t want your c****y Windows 11!
    • Microsoft: Windows 11 could finally solve a major issue across AMD, Nvidia, and Intel GPUs by Sayan Sen While Microsoft has been trying to improve it, Windows 11 is definitely not flawless, as even today some issues are taking a year to publicly acknowledge. However, one area of trouble that may finally see much better results soon is graphics driver crashes. Work on graphics driver timeouts, also called Timeout and Detection Recovery (TDR), is not new as the latest WDDM 3.2 also has specific improvements regarding it. Windows Display Driver Model (WDDM) version 3.2 is supported on Windows 11 24H2 and 25H2. However, with the upcoming version 26H2, TDR crash diagnosis could go to the next level as Microsoft is introducing a new DirectX 12 API feature called "DirectX Dump Files". Similar to how system memory dump files work when a system crashes or freezes or encounters any such major issue, DirectX Dump Files (DDF) will essentially record a snapshot of the GPU execution right at the moment a graphics-related crash or hang or freeze occurs, so that developers can better understand and diagnoze these TDR and timeout detection errors. The dump will be available as a .dxdmp file for analysis and it will be a comprehensive dump file generated with detailed insights about the hardware, drivers, Windows, as well as the affected application. This should be another welcome change in this department. Earlier at GDC 2026, when the technology was first debuted, Microsoft had shared more details regarding it. The company had explained how DDF is designed to gather data from every layer of the graphics stack into a single file, eliminating the need for developers to manually correlate logs from multiple tools. As mentioned above, the dump can contain a lot of useful details like GPU hardware state information such as register values, shader program counters, page fault virtual addresses, shader memory data, and command buffers. Alongside that, it also captures DirectX runtime and kernel information, including D3D objects, pipeline state objects, device error data, adapter details, and CPU call stacks. Microsoft says the feature has been built around two primary use cases: retail device removals and local device removals. The former allows developers to collect crash information from end users' systems in the field, while the latter helps QA teams and developers investigate issues on test machines. Developers will also be able to include up to 2 MB of custom application data through new D3D12 APIs, providing additional context for troubleshooting. In addition, Microsoft is introducing three dump collection modes ranging from zero-overhead capture, which has no runtime performance impact on supported hardware, to higher-detail modes that collect more vendor-specific debugging data. On compatible Tier 2 hardware, zero-overhead dumps will be enabled by default, meaning developers may begin receiving useful crash diagnostics without making any code changes. The table below explains the three tiers: Tier Description NO_OVERHEAD Enables crash capture with no runtime cost and is suitable for broad deployment MEDIUM_OVERHEAD Provides a balance, capturing additional diagnostic data with moderate impact HIGH_OVERHEAD Collects the most detailed GPU and driver state available, enabling deeper investigation at the cost of higher runtime overhead In terms of availability, the company expects broader release to be around the fall of 2026, which should be right around the time when Windows 11 version 26H2 lands. Right now, DirectX Dump Files are available as a preview and currently, only AMD has the compatible AgilitySDK Developer Preview driver version 26.10.07.02. You can find the official announcement post here on Microsoft's website.
    • And with SO much better perf than the laggy mess that is Files.
    • BrowserOS 0.46.0 by Razvan Serea BrowserOS is a free, open-source Chromium-based browser that runs AI agents natively, offering a smarter, more productive browsing experience. It supports Chrome extensions and integrates AI agents to automate tasks, fill forms, and streamline workflows. Your data stays on your computer: you can use your own API keys or run local models via Ollama, making it a privacy-first alternative to tools like Perplexity, Comet, or Dia. With built-in productivity tools and app integrations, BrowserOS boosts efficiency while keeping control firmly in your hands. Being Chromium-based, BrowserOS lets you effortlessly import your bookmarks, passwords, and Chrome extensions in just a few clicks. BrowserOS works with OpenAI GPT models, Anthropic Claude, Google Gemini, and local AI models via Ollama or LMStudio. You can use your own API keys and effortlessly switch between providers. BrowserOS Agent Your AI productivity assistant that organizes and manages your browsing effortlessly Quickly list, group, or close tabs Save and resume browsing sessions Search your history and organize bookmarks Switch instantly to the tab you need BrowserOS Navigator – Automate web tasks with ease Navigate websites and search automatically Interact with pages without manual effort Handle repetitive tasks in seconds What makes BrowserOS special Feels like home - same familiar interface as Google Chrome, works with all your extensions AI agents that run on YOUR browser, not in the cloud Privacy first - bring your own keys or use local models with Ollama. Your browsing history stays on your computer Open source and community driven - see exactly what's happening under the hood MCP store to one-click install popular MCPs and use them directly in the browser bar (coming soon) Built-in AI ad blocker that works across more scenarios! BrowserOS 0.46.0 changelog: Run Claude Code & Codex right in your browser — We've extended the agent harness to bring full coding agents into BrowserOS. Claude Code and Codex now come bundled and plug straight into the assistant, so you can drive your browser with the agent — and the subscription — you already use. A brand new experience — A redesigned new tab, a calmer composer, and a rebuilt command center for switching between agents. The whole assistant is cleaner, faster to reach, and easier to live in. New MCP tools — We rebuilt the browser tool surface from the ground up — a tighter, more reliable set of tools for agents to drive the browser. Plus one-click install of BrowserOS as an MCP server into the agents you already run, with automatic URL sync. Chromium 148 — Updated to the latest Chromium base with all recent upstream fixes and security patches. Streamlined — We've pulled back a few features that weren't getting much use — Skills, Soul, and Memory — so we can focus and ship better versions of them soon. Download: BrowserOS 0.46.0 | 181.0 MB (Open Source) Download: BrowserOS for macOS | 485.0 MB Links: BrowserOS Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      594
    2. 2
      +Edouard
      187
    3. 3
      PsYcHoKiLLa
      79
    4. 4
      Michael Scrip
      74
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!