Show us your Servers - 2015 Edition


Recommended Posts

Welcome to the server photos thread. In this thread you may post pics of your server.

Please be mindful of our members on dial-up and try to keep the dimensions of the pics and the size of the files to a respectable size for 1024 x 768 viewers. Please refrain from quoting images in your replies.

I will also ask that you link to images on your own space, as much as possible.

The usual forum rules also apply.

The last thread can be found here.

Link to comment
https://www.neowin.net/forum/topic/1241720-show-us-your-servers-2015-edition/
Share on other sites

Yeah having a NAS is great for storing media for streaming to htpc's. It's also very handy to have all that extra space for backups and file sharing. I like the easy to use web based OS as opposed to dealing with Windows Server. I will say that I wish there was a good backup solution for such large storage as 30TB. I'd probably shoot myself if I had you're-rip 600 blu Rays.

P.S. What is 100PB?

Edit: Ah, petabytes. ;-)

  • 2 weeks later...
File Server:
Intel i5 2500k Processor
Gigabyte Z77X-D3H Motherboard
8GB Corsair Dominator DDR3-1600
90GB Corsair ForceGT SSD [OS Drive]
20TB usable storage (FlexRAID with 2-drive redundancy, all WD Green 1TB/2TB)
Ceton InfiniTV 4
Rocketfish Case (modded to hold 20 hard drives)
Highpoint DC-7280 Datacenter HBA
Sans Digital TowerRAID 8-bay eSATA Enclosure
Zalman 850w Heatpipe Cooled PSU
WHS 2011
Apps installed: MyMovies Server, Media Center Master, MediaBrowser Server, Ubiquiti UniFi Video Server, FlexRAID RAID-F, Ceton InfiniTV network bridge, Trigone System Monitor, etc. Everything is also setup with remote notifications in case a process stops or a hard drive dies.. I get a text and an email notifying me.
 
PC290013.jpg
 
PC290014.jpg
 
PC290010.jpg
 
flexraid_1-15-2015.png
 
The rack:
3x HTPC's
ProAudioVideo 22u / 1000mm Deep Rack
Belkin PF60 Power Center
Zyxel 24port Gigabit Switch
Asus RT-N16 running DD-WRT (Linux Kernel 3.10.2)
Motorola SB6121
Everything is on a CyberPower 1500VA UPS (about 25mins in a power outage, with PC shutdown scripts via USB)
 
PC290015.jpg
 
PC290021.jpg
 
PC290022.jpg
 
PC290020.jpg
 
HTPC's:
3 of each...
MSI P67A-G43 Motherboard
Intel i3 2100 Processor
PNY 4GB (2x2GB) DDR3-1600 Memory
Corsair Force 3 60GB SSD
Galaxy GTS 450 Graphics Card
NMediaPC Pro-LCD 5.25'' Screen
Corsair CX430 Power Supply
Rosewill R4000 4U Rackmount Case
Monoprice HDMI to Ethernet Converters to the TV's
Monoprice USB to Ethernet to the IR Receivers mounted under the TV's (power up/down of the PC and control WMC)
Recordings all get archived to the WHS via the home server storage plug-in, so the 60GB SSD's are sufficient)
All HTPC's run Win7 x64 with MediaBrowser. They have been tested with almost every media file I have, and the codecs are all setup properly and it runs flawless, including 1080p 3D SBS Blu-ray encodes with FLAC audio. I will be transitioning to Media Browser Theater soon. I've been testing it on my test box computer and it is pretty impressive and I think I have the setup tweaked properly to run everything so I can just copy over the config.
 
IMG_20111008_214108.jpg
 
IMG_20111009_180639.jpg
 
IMG_20111022_174534.jpg
 
IMG_20111022_174545.jpg
 
IMG_20111022_174606.jpg
 
IMG_20111022_174632.jpg
 
And the test server environment.. I'm currently testing SnapRAID under Windows 7 and Windows 8.
 
AMD FX6300 6 Core

GIGABYTE GA-78LMT-USB3 mATX

Crucial 8GB DDR3-1600

Rosewill 600w PSU

MicroFly mATX Case

160GB Maxtor Diamonmax Plus 9 ATA133 HDD (OS Drive)

Sans Digital TowerRAID TR8M+B w/ 6 Seagate 750GB HDDs (Data Volume)
 
test-box.jpg
  • Like 4

 

File Server:
Intel i5 2500k Processor
Gigabyte Z77X-D3H Motherboard
8GB Corsair Dominator DDR3-1600
90GB Corsair ForceGT SSD [OS Drive]
20TB usable storage (FlexRAID with 2-drive redundancy, all WD Green 1TB/2TB)
Ceton InfiniTV 4
Rocketfish Case (modded to hold 20 hard drives)
Highpoint DC-7280 Datacenter HBA
Sans Digital TowerRAID 8-bay eSATA Enclosure
Zalman 850w Heatpipe Cooled PSU
WHS 2011
Apps installed: MyMovies Server, Media Center Master, MediaBrowser Server, Ubiquiti UniFi Video Server, FlexRAID RAID-F, Ceton InfiniTV network bridge, Trigone System Monitor, etc. Everything is also setup with remote notifications in case a process stops or a hard drive dies.. I get a text and an email notifying me.
 
 
 
 
 
 
 
 
 
The rack:
3x HTPC's
ProAudioVideo 22u / 1000mm Deep Rack
Belkin PF60 Power Center
Zyxel 24port Gigabit Switch
Asus RT-N16 running DD-WRT (Linux Kernel 3.10.2)
Motorola SB6121
Everything is on a CyberPower 1500VA UPS (about 25mins in a power outage, with PC shutdown scripts via USB)
 
 
 
 
 
 
 
 
 
HTPC's:
3 of each...
MSI P67A-G43 Motherboard
Intel i3 2100 Processor
PNY 4GB (2x2GB) DDR3-1600 Memory
Corsair Force 3 60GB SSD
Galaxy GTS 450 Graphics Card
NMediaPC Pro-LCD 5.25'' Screen
Corsair CX430 Power Supply
Rosewill R4000 4U Rackmount Case
Monoprice HDMI to Ethernet Converters to the TV's
Monoprice USB to Ethernet to the IR Receivers mounted under the TV's (power up/down of the PC and control WMC)
Recordings all get archived to the WHS via the home server storage plug-in, so the 60GB SSD's are sufficient)
All HTPC's run Win7 x64 with MediaBrowser. They have been tested with almost every media file I have, and the codecs are all setup properly and it runs flawless, including 1080p 3D SBS Blu-ray encodes with FLAC audio. I will be transitioning to Media Browser Theater soon. I've been testing it on my test box computer and it is pretty impressive and I think I have the setup tweaked properly to run everything so I can just copy over the config.
 
 
 
 
 
 
 
 
 
 
 
 
 
And the test server environment.. I'm currently testing SnapRAID under Windows 7 and Windows 8.
 
AMD FX6300 6 Core

GIGABYTE GA-78LMT-USB3 mATX

Crucial 8GB DDR3-1600

Rosewill 600w PSU

MicroFly mATX Case

160GB Maxtor Diamonmax Plus 9 ATA133 HDD (OS Drive)

Sans Digital TowerRAID TR8M+B w/ 6 Seagate 750GB HDDs (Data Volume)
 
 

 

 

Good grief, that's sexy!

 

Only thing is that I read that the green drives are high unreliable for RAID environment. Seeing as how you went all out on everything else, why didn't you opt for Red NAS drive?

 

Also, how do you like MediaBrowser? I understand that the server end only runs on windows? I run Kodi on all my clients.

Edited by Haggis
removed pics in quote

I am running software RAID right now (FlexRAID) soon to move to SnapRAID.. so there are no issues. The issues people had with WD Green drives are on hardware RAID. So far it has been very reliable for me for years.

 

As far as Mediabrowser Server, it can run on all sorts of various platforms.. Windows, Linux, Mac, FreeBSD, FreeNAS, and OpenMediaVault. I have mine running on WHS 2011, and I have Android/Kindle/Win8 apps running on my mobile devices as well as MediaBrowser client apps running on the HTPCs. It works seamless and perfect so far. I'd definitely recommend the platform to anybody. I love it. Also, MediaBrowser server supports Kodi now, so you're all set for it to manage your backend metadata and TV tuner plugins.

 

Mindovermaster - I assume you're talking about the rackmount chassis? The HTPC cases are Rosewill R4000 4U rackmount cases and they are housed in the ProAudio 22u/1000mm depth rack.

Case - http://www.newegg.com/Product/Product.aspx?Item=N82E16811147154

Rack - http://www.proaudiostash.com/product/19-inch-rack-cabinets/free-standing-rack-cabinets/pre-assembled-rack-cabinets/19-server-rack-enclosure-600mm/23-62-wide-glass-door/11198.shtml

Instead of showing those 8 pictures again, you quote:

 

 

 

File Server:
Intel i5 2500k Processor
Gigabyte Z77X-D3H Motherboard
8GB Corsair Dominator DDR3-1600
90GB Corsair ForceGT SSD [OS Drive]
20TB usable storage (FlexRAID with 2-drive redundancy, all WD Green 1TB/2TB)
Ceton InfiniTV 4
Rocketfish Case (modded to hold 20 hard drives)
Highpoint DC-7280 Datacenter HBA
Sans Digital TowerRAID 8-bay eSATA Enclosure
Zalman 850w Heatpipe Cooled PSU
WHS 2011
Apps installed: MyMovies Server, Media Center Master, MediaBrowser Server, Ubiquiti UniFi Video Server, FlexRAID RAID-F, Ceton InfiniTV network bridge, Trigone System Monitor, etc. Everything is also setup with remote notifications in case a process stops or a hard drive dies.. I get a text and an email notifying me.
 
<snip>
 
The rack:
3x HTPC's
ProAudioVideo 22u / 1000mm Deep Rack
Belkin PF60 Power Center
Zyxel 24port Gigabit Switch
Asus RT-N16 running DD-WRT (Linux Kernel 3.10.2)
Motorola SB6121
Everything is on a CyberPower 1500VA UPS (about 25mins in a power outage, with PC shutdown scripts via USB)
 
<snip>
 
HTPC's:
3 of each...
MSI P67A-G43 Motherboard
Intel i3 2100 Processor
PNY 4GB (2x2GB) DDR3-1600 Memory
Corsair Force 3 60GB SSD
Galaxy GTS 450 Graphics Card
NMediaPC Pro-LCD 5.25'' Screen
Corsair CX430 Power Supply
Rosewill R4000 4U Rackmount Case
Monoprice HDMI to Ethernet Converters to the TV's
Monoprice USB to Ethernet to the IR Receivers mounted under the TV's (power up/down of the PC and control WMC)
Recordings all get archived to the WHS via the home server storage plug-in, so the 60GB SSD's are sufficient)
All HTPC's run Win7 x64 with MediaBrowser. They have been tested with almost every media file I have, and the codecs are all setup properly and it runs flawless, including 1080p 3D SBS Blu-ray encodes with FLAC audio. I will be transitioning to Media Browser Theater soon. I've been testing it on my test box computer and it is pretty impressive and I think I have the setup tweaked properly to run everything so I can just copy over the config.
 
 
<snip>
 
 
And the test server environment.. I'm currently testing SnapRAID under Windows 7 and Windows 8.
 
AMD FX6300 6 Core

GIGABYTE GA-78LMT-USB3 mATX

Crucial 8GB DDR3-1600

Rosewill 600w PSU

MicroFly mATX Case

160GB Maxtor Diamonmax Plus 9 ATA133 HDD (OS Drive)

Sans Digital TowerRAID TR8M+B w/ 6 Seagate 750GB HDDs (Data Volume)
 

<snip>

 

So if you quote someone, you are not reloading all those pics. Believe me, it really helps the dial-up people, if any.

Love the pictures, great setup!

 

My "servers" are what I can make due with using old hardware :)

 

My file server is an old HP Pavilion specked out as follows: 

 

CPU: Pentium Dual Core E2160

RAM:3GB DDR2

Mobo: Intel 945G based motherboard

Storage: 3 1TB SATA drives in RAID 5

Video: NVidia GeForce 8500 GT

OS: Windows Storage Server 2008 Basic SP2 x86

Data on the RAID 5 array is backed up to an external 2TB USB drive.

 

Its old but it gets the job done as all it does is serve files and media

 

My media server is a slightly newer Dell Inspiron N5040 with a bad display

 

CPU: i3 M390

RAM: 4GB DDR3

Storage: 5400 RPM 500GB

Video: i3 HD onboard

OS: Windows 8.1 Pro x64

This machine runs Plex Media Server along with IIS for my personal playing and development.

Data for Plex is pulled from the file server.

 

Rounding it all out is a DLink DNS-321 NAS with 2 1TB drives in RAID 1 to backup the Dell "server" along with my family's data on their personal laptops.

 

Not real servers but it meets my requirements

Yeah old hardware is perfect for making servers. I had originally put together an AMD FX based server with 4TB and was going to use unRAID. I also tried FreeNAS but both took forever to set up and configure and then to run the parity check. Additionally, I knew that the space would be too small and the hardware was too high end to waste in a server. So, I made it into a gaming PC for my brother and opted for the Synology. I like the Synology because of the terrific web based OS and the ease in creating a volume. It still took days to do the parity check but I just found the setup and maintenance via the OS very easy. That plus the various apps made it a no brainer for me. Another big selling point was the expansion boxes that add 5 drives at a time. I started out with just the Diskstation and as the space filled up, I bought the expansion box and added 5 drives. I'm only 68% full so I don't have to upgrade for some time. The nice thing is that I can keep adding expansion boxes and adding more space. I couldn't figure out a good way to add a lot of space with my own build without trying to find a huge case where I could have 10+ drives. I use my Synology to host all my media for Kodi using SQL for database management plus iTunes server.

 

I only hope that the volume never crashes because it was SO much work to rip all my movies and TV shows. The drive fault tolerance is great and I had 2 drives fail at different times and just had to replace it, run the parity check, and then I was good. Those bad drives were Seagate Barracuda drives. I had someone point out that I'd have much more stability with drives made for NAS's so I opted to gradually switch them all over to WD Red.

mine is just a baby compared to most of yours lol

 

HO Microserver N54L Gen 7

 

Running ESXi 5.5 just now

 

1 vm with Arch Linux for playing about with

1 vm with debian on it which has file storage and plex

 

in the next few week another VM will be added with pfsense

 

 

It will have its normal gigabit port and i am adding a dual gigabit port to it

 

8Gb Ram

and has a little under 2Tb of space just now

 

post-229387-0-18398900-1421693960.jpg

Well here is a screenshot of some of the specs. It is in my loft, some people are asleep and the loft ladder is squeaky - I will go up there tomorrow and get a few photos of it to add to this post. As you can see it is a bit cold tonight in my loft (7C).

 

The server has 64GB extra memory added to make it 72GB now, 8x 1TB midline HP SAS drives, one (240GB?) OCX Vertex 3SATA SDD and an AMD FirePro W7000 graphics card on it for the virtual desktop VMs to share.

 

We use LG CBV42-B Tera2 PCoIP zero clients to connect to the desktop VMs - saves quite a bit of space. It also works well for gaming.

 

post-63221-0-14464100-1421964210.png

post-63221-0-45182900-1421964447.png

 

Pics of the loft of doom to follow.

I finally managed to get a few photos of the mess in my loft. I forgot to take the key for the bezel up there, so I will have to get a photo of the server with the front and side panel removed when I next have to dig out some random item.

 

Most of the equipment:

WP_20150127_20_10_45_Pro.jpg

 

Router/Firewall/AP/AP Controller, Cable Modem, excess cable loop and spilt oil stain (not water from a leak!):

WP_20150127_20_11_25_Pro.jpg

 

Patch panel, spaghetti cable, dumb gigabit switch, smart gigabit Ethernet switch, UPS and part of server:

WP_20150127_20_11_50_Pro.jpg

 

IP PBX, Voicemail, power strip connected to UPS, and the world's shittiest phone:

WP_20150127_20_11_59_Pro.jpg

 

As above with Server:

WP_20150127_20_12_13_Pro.jpg

 

Flashy lights:

WP_20150127_20_12_37_Pro.jpg

 

Three UK Femtocell, bright fluorescent light:

WP_20150127_20_12_59_Pro.jpg

Where did you get your Three Femtocell from?

I called up Three customer services when I was at the pub, explained that I had to go into my garden when at home to make a phone call and asked if they could send me one of their Three Home Signal boxes. The woman explained that I'd have to answer a few questions as it is the standard procedure, then she took some details, played an automatic terms and conditions recording, then the call ended. I still had most of my pint left it was that quick. It arrived the next day.

 

You don't have to register phones to them anymore - any Three mobile will use the signal from the Femtocell when in range. I cant remember if the limit is 20 or 50 devices. It also provides 2G, 3G and 3.5G signals.

I finally managed to get a few photos of the mess in my loft. I forgot to take the key for the bezel up there, so I will have to get a photo of the server with the front and side panel removed when I next have to dig out some random item.

 

 

As a former fellow attic equipment dweller, I would put something over the top of your equipment in case of a leaks / humidity / condensation build up in the roof & arachnids/insects. You'd be surprised at what dies and falls down onto it!

If possible, get it off the caber flooring onto something above floor level too to help against dust/particle build up.

 

Here's my old secondary domain controller / access point as an example (using an old drawer cabinet):

 

post-129876-0-70020600-1422567158.jpg

 

post-129876-0-16501800-1422567162.jpg

As a former fellow attic equipment dweller, I would put something over the top of your equipment in case of a leaks / humidity / condensation build up in the roof & arachnids/insects. You'd be surprised at what dies and falls down onto it!

If possible, get it off the caber flooring onto something above floor level too to help against dust/particle build up.

 

Here's my old secondary domain controller / access point as an example (using an old drawer cabinet):

 

SNIPPED IMAGES

 

That looks like a neat and tidy setup. I like the reusing of an old set of drawers to cover and raise the equipment.

 

I will be using your recommendations and raising/covering the equipment in my loft. It will have to wait a little bit though for now as I have to find a job that I can 'lose' the cost of the materials into. This is going to require some beefy supports! I am also going to have to add a thermostatically controlled extractor fan, as temperatures reach 35C max in the summer up there with no air circulation. I have not had that server there in the summer yet, so I have to get it fitted before then.

 

Have you got a smoke alarm in your loft? I fitted one with a 10 year-life battery in mine the other day just incase something decides to die up there, without killing us at the same time.

I called up Three customer services when I was at the pub, explained that I had to go into my garden when at home to make a phone call and asked if they could send me one of their Three Home Signal boxes. The woman explained that I'd have to answer a few questions as it is the standard procedure, then she took some details, played an automatic terms and conditions recording, then the call ended. I still had most of my pint left it was that quick. It arrived the next day.

 

You don't have to register phones to them anymore - any Three mobile will use the signal from the Femtocell when in range. I cant remember if the limit is 20 or 50 devices. It also provides 2G, 3G and 3.5G signals.

 

I am sure I tried that before and the "Customer Service Agent" had no idea what I was talking about. Granted that was about 2 years ago now.

This topic is now closed to further replies.
  • Posts

    • That lens of history will burn if you hold it at the right angle... Warn users too late: Shame, Microsoft! That extremely minor update to an obscure Control Panel widget required 2 years of warning. Warn users too early: Shame, Microsoft! We've got better things to do. Pipeline and process be damned, we'll just always be disappointed, eh?
    • Microsoft Paint used to be my favorite Windows app as a kid, and it's still pretty good by Usama Jawad I have been using Windows since the early 2000s, when I was around 10 years old or so. I vaguely remember playing around with Windows 98 and Windows 2000, but that may have been on school PCs which had old operating systems installed. My main OS on the home PC, and the one I recall spending most time with, was Windows XP. At that time, I used the home PC to create Word and PowerPoint documents for school, but a lot of the time, I simply used it to play games. My dad would bring game discs which we would try and install on the PC, sometimes unsuccessfully, and sometimes, we would rely on flash games in the browser, like Bubble Trouble on Miniclip. However, the problem with the latter approach was the internet speed. On a good day, our dial-up internet would offer us speeds of 56 kbps, but on most days, it was closer to 33 kbps. This did not facilitate online gaming as I would often have to wait minutes for a game to load or "draw" on the screen, and trying to download pirated games wasn't simple either. I remember getting tired of waiting for online games to load and just downloading simulator games from the Big Fish Games website instead, only to be disappointed after finding out that I was just being given access to trial versions of the title, and I needed to fork out money to pay for the full version. All of this is to say that it wasn't very easy to find entertainment options on the home PC when I was a kid, due to a number of reasons, mostly outside of my control. This situation pushed me towards a rather unconventional ally: Microsoft Paint. Whenever the internet wasn't working as good as I expected, I would simply spin up Paint and draw complete rubbish on the canvas. Of course, that wasn't always the intention, but it usually happened when I messed up drawing a straight line or something, and then I would give up on that particular piece and simply draw a random collection of objects. Microsoft Paint was extremely accessible and easy to use. Even if you weren't an artist, you could quickly understand the tools at your disposal and how to leverage them on a canvas. The absolute breadth on offer ensured that each painting was truly unique, as you could utilize various combinations of tools like the pencil, paint, spray paint, and more to truly personalize your creation. Since I wasn't particularly good at drawing both on digital screen or a physical screen, I remember that my main style of art would be to insert a bunch of randomly intersecting lines and then fill them with random colors through the paint can. I have trying to replicate that art style in the latest version of Paint below, and as you can see, it's truly Pablo Picasso-esque. The human imagination truly knows no bounds Microsoft Paint kept me occupied for hours and was my best friend when video games on the home PC were inaccessible for one reason or the other. There was no academic or professional reason for which I would need to use Paint, but I still loved using it in my personal time, even if what I created wasn't worth being shown to anyone. It was simply fun. Fast-forward to today, and the situation is mostly the same. Now that I am almost 29 years old, and I still have no reason to use Microsoft Paint in a professional capacity. In fact, I don't even use it in a personal capacity, except to dabble with it from time to time, just to see if core functionalities are still intact. And I'm happy to say that I think Microsoft Paint still offers the same accessibility and inviting experience that it did to me a couple of decades ago, even though its UX has been refreshed and it's been integrated with Copilot features. Interestingly, things could have been a lot different, had Microsoft had its way. Microsoft Paint was marked for deprecation with the Windows 10 Fall Creators Update in 2017, and even began displaying a product retirement alert, urging customers to shift to Paint 3D instead. Fortunately, after consumer backlash, Microsoft reversed course on this decision, and Paint continues to be a native app inside Windows installations that can also be updated quite frequently through the Microsoft Store. Instead, Paint 3D ended up on the chopping block, which is for the better, I think. I have intermittently played around with Microsoft's refreshed Paint experience in the past few years, and I do think it has received worthwhile upgrades. the UI and the UX has been modernized while retaining core functionality, and the app is still fairly easy to use. It doesn't meet any of my use-cases, but I've never really had any use-cases ever, as described previously. Of course, the elephant in the room is the Copilot integration. Personally, I believe that this is one place where Copilot does make sense, environmental concerns aside. I know that a lot of creatives use AI to generate images, and while some may be using professional alternatives, Paint still offers a decent casual experience, with the power of Copilot. Of course, you do need to have a valid Microsoft 365 Copilot license and available credits to use it, but even if you don't, you still get the big Copilot button in the toolbar, unfortunately. All in all, I am glad that Microsoft Paint continues to be a native feature in Windows 11, and a piece of software that has evolved to meet modern needs without cutting off its own roots. It's just an iconic piece of Windows history that was an essential part of my childhood, and while I don't use it anymore, I'm just glad it is still there.
    • 2TB WD_Black SN7100 PCIe Gen4 NVMe SSD drops to its lowest price in over three months by Fiza Ali Amazon is currently offering the 2TB WD_Black SN7100 internal solid-state drive at its lowest price in over three months, so you may want to check it out, if you have been considering a storage upgrade, before the deal dries up (purchase link is toward the end of the article). Featuring a PCIe Gen 4.0 interface and M.2 2280 form factor, the SN7100 promises to deliver sequential read speeds of up to 7,250MB/s and sequential write speeds reaching 6,900MB/s, offering as much as a 35% improvement in performance compared with the previous generation. It also achieves random read speeds of 1,000,000 IOPS and random write speeds of 1,400,000 IOPS. The drive uses Western Digital’s TLC 3D NAND technology for reliable performance and is further supported by a five-year limited warranty. It also offers strong endurance, rated at up to 1,200TBW, making it suitable for demanding workloads such as gaming, content creation, and high-speed recording. Moreover, its DRAM-less architecture claims to improve power efficiency (the SSD relies on system memory for caching via HMB), while the WD_Black Dashboard software enables users to monitor drive health, install firmware updates, and activate Game Mode for potentially better performance. Finally, it operates within an operating temperature range of 0°C to 85°C, and can withstand storage temperatures from -40°C to 85°C. 2TB WD_Black SN7100 PCIe Gen4 NVMe SSD: $242.96 (Amazon US) Check this deal out if you want a 4TB option. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Hopefully this will fix the issue of no sound I have since last months stupid, and non-removable, Microsoft Corporation AudioProcessingObject Driver Update (1.0.3.56670)
    • It IS confusing! What channel are you in on each device? I'm guessing your 16GB device is on Experimental (formerly known as Dev) and your 128GB is on Beta.
  • Recent Achievements

    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • One Month Later
      Genuinetonerink- Dubai earned a badge
      One Month Later
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
    • One Year In
      hhgygy earned a badge
      One Year In
    • Week One Done
      AMV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      163
    3. 3
      PsYcHoKiLLa
      87
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!