CPU fan speeds up during gameplay out of the blue

By mudslag
in Hardware Hangout

 Share

Recommended Posts

Grand Master

mudslag

Posted
Posted

Normal use, non-game playing and everything is fine but within a few mins of playing, TF2/skyrim/ect then my cpu fans start speeding up and this is all out of the blue. No hardware changes or software change/updates. Even if I tab out of the game the fan speeds slow down. Not sure what could be the issue. Below is a screen shot of HWMonitor/CPU-Z/GPU-Z. Any help would be appreciated.

VXgK649.png

Grand Master

The Evil Overlord

Posted
Posted

Sounds like it's fine, a lot of rigs adjust fan speed depending on how much is being demanded from components, (mine goes from near silent to a jet engine taking off, depending on the game or application) it's getting hotter, so more cooling is required.

Grand Master

mudslag

Posted
  • Author
Posted

Sounds like it's fine, a lot of rigs adjust fan speed depending on how much is being demanded from components, (mine goes from near silent to a jet engine taking off, depending on the game or application) it's getting hotter, so more cooling is required.

 

 

It just never acted like this, had the pc since 2012, which is why I started to get concerned. 

Grand Master

The Evil Overlord

Posted
Posted

It just never acted like this, had the pc since 2012, which is why I started to get concerned.

Actually Decrypter has a point, dust can cause heating issues also, and come to think of it, I haven't cleaned my new rig since I built it, so I should do that too.
Grand Master

Draconian Guppy

Posted
Posted

Clear any dust out if you're concerned, but the CPU fans spinning up under load is normal, it's what they're supposed to do.

This.

 

Dust builds up in heatsinks, causing fans to have to spin up higher in order to cool.

Grand Master

mudslag

Posted
  • Author
Posted

the CPU cores are in their 60's.... what would you expect? youre saying the fans would never speed up before even when the cores are 60C+??

 

No it's never been an issue before.

 

 

Yeah clean the dust out of the heatsink/fan and also remove the heatsink/fan and reapply new thermal paste.

 

Going to reset the heatsink this weekend. 

Grand Master

Mando

Posted
Posted

Could be the drying of the heatsink thermal compounds on the CPU and GPU, I always replace my hs compound annually, it dries out being heated/cooled cycle for 2 years mate.

Also clean all your heatsinks of dust, any surface dust on components act like a dusty cosy blanket and will raise case ambient temps also.

 

Flow of air through the case is as important as the actual heatsinks, the lower the ambient air temperature in the case, the more effective your cooling is on heatsinked items (active & passive)

Also clean any dust sponge filters your fans have on the case, doesn't take that much to reduce airflow, allowing ambient temperatures to build up, affecting efficiency of your cooling, resulting in higher temps especially under load.

Grand Master

mudslag

Posted
  • Author
Posted

I think I got it solved. I took the heatsink down and took off the fans to give it a better cleaning. Even did all updates that I could just in case it was software related. Seems to be back to normal for the most part. Thanks for all the help.

Grand Master

Mando

Posted
Posted

I think I got it solved. I took the heatsink down and took off the fans to give it a better cleaning. Even did all updates that I could just in case it was software related. Seems to be back to normal for the most part. Thanks for all the help.

Your welcome mate, while your at it review your case cooling and free pathways for the intake fans etc
This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed

      By PsYcHoKiLLa · Posted

      If Valve refused to let them make the case, I wonder if they've already partnered with someone else to do it? The fact that they didn't seek permission/licence before diving straight in is incredible though
    • Google pitches Spanner as one database for all AI agents with these new featues

      By Stup0t · Posted

      All your data's belong to us.
    • OpenClaw now has native mobile apps on iOS and Android

      By Karthik Mudaliar · Posted

      OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues

      By Karthik Mudaliar · Posted

      Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5

      By Copernic · Posted

      Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie

  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!