Recommended Posts

 

You will need some good NICs in your ESXi server. Also, don't bother with a hardware firewall, pfSense is far better than that TPlink and perfectly suited to your ESXi box.

For reference, below is my ESXi server.

As for the components you've listed. Definitely avoid the Crucial MX series. Awful firmware and a lot of problems with them.

https://www.google.co.uk/#q=crucial+mx100+bsod

 

 

I'd go with Supermicro instead of MSI motherboards.

Hard disks, yes, as others have stated, avoid Seagate and go WD for HDD, and Samsung 850 (Pro) or SM951 for SSD.

 

ESXi 6.0 box:

1x Lian Li PC-V2130 case (holds 15x 3.5" + 4x SSDs) - PC-V2130B

1x Supermicro X10DRi-T motherboard (DP and 2x Intel10GbE) - MBD-X10DRi-T
1x Antec HCP1300 Platinum PSU (Platinum rated and quiet!) - HCP1300 Platinum
2x Crucial 32GB (16GB x2) CL15 DDR4-2133 ECC 1.2V - CT2C16G4RFD4213
2x Intel Xeon E5-2620V3 6 Core CPU - BX80644E52620V3
2x Noctua NH-U12DX i4 heatsink/fan (Narrow ILM) - NH-U12DX i4
1x LSI 8 Port 6Gbps MegaRAID SAS 9261-8i with BBU (from previous server) - LSI00212
1x LSI 8 Port 6Gbps MegaRAID SAS 9271-8i (from previous server) - LSI00331
1x Noctua NF-A4x10 FLX 40mm fan (for LSI RAID card) - NF-A4x10 FLX
1x Samsung 850 Pro 512GB SSD
2x Intel I350-T4V2 4-port Ethernet Server Adapter (from previous servers) - I350T4V2BLK
1x Kingston DataTraveler Ultimate G3 32GB USB 3.0 (ESXi boot disk) - DTU30G3/32GB
3x Lian Li HD-07A hard drive trays - HD-07A
1x Akasa Siliconized Rubber Fan Pins - 20 Pack (to silence rear fan) - AK-MX003
2x Powercool 20cm Male molex 4pin to 4x SATA Power Braided Cable - Black - M4XSATA
2x Noctua NF-S12A PWM Case Fan 120 mm (to replace noisy Lian Li rear case fans) - NF-S12A
1x Akasa AK-CBUB19-10BK USB 3.0 to USB 2.0 Adapter Cable - AK-CBUB19-10BK
1x Startech 6 inch USB A Female to USB Motherboard 4-Pin Header USB 2.0 Cable (to plug in ESXi boot disk inside case) - USBMBADAPT

 

I was going to get the NICs after I first got it built. When it comes to NICs, I'm fairly lost. I'm behind the times on things, and even BudMan is pulling hair out some times. I looked at pfSense, and their website doesn't seem to do anything. Maybe it's just the network here at work.

Is this an example of what you were referring to;

http://store.pfsense.org/SG2220/

 

 

 

 

I bought over 250 of those MX100s for work and not one issue so far. Been a year or so. After the 840 EVO issues, not sure I'd recommend Samsung. I have an 840 Pro and like it but we bought many 840 EVOs and do see slowness in those after a while.

 

Ironically, the 840 and 850 pro have been deemed the #1, at least as far as Google Searches and SSD Benchmark tests are concerned.

If you think you need massively powerful hardware for virtualisation, you are somewhat missing the point of virtualisation.  My 'server' spends most of its time running at about 200Mhz of utlilisation.  It has a dual core processor and comfortably will run about 10 virtual machines - the roadblock I hit with running more is not so much processor, but RAM (I only have 16GB).

 

My 'server' has a processor that isn't much more powerful than the sort of Atom processors you find in modern tablets.

 

Ultimately it is your money, to spend as you wish.... seems like you have plenty of it to be buying this for a lab...

 

Mm.. I was going to run a number of different things. A few of them would be learning, but some would have live applications on them.

OS1: Server 2008 - Educational

OS2: Server 2012 - Eduacational

OS3: RHEL5.x+ - Educational

OS4: RHEL7.x - Game Host Testing (Friend and I are working on converting a game server from Windows to Linux)

OS5: Windows 7

OS6: Windows 8.x

OS7: Windows 10.x

OS8: RHEL7 - Database/Educational/PHP/HTML/CSS etc..

OS1 - 4, & 8 would be online and running 24/7, the other ones would be more for Educational. Things that could be shut down.

only thing i would add on what all the other guys have said is i would have dual or triple NIC's and break the vmkern out onto one of its own

 

That's the plan boss, i was going to look at grabbing one or two dual or triple port NICs for it. As for the vmkern, I'll cross that bridge when I get to it. :p

My 2cents. I have Intel 4690s, quad core at 3.2GHZ (upto 3.9Ghz) using 65watt (and yes thats not all the time) Running my Server2012 with 6 Hyper-V VMs and is also my Steam InHome Streaming Server (with the help of my GTX750Ti Video Card). I have a 256GB SSD for VM - OS (10-30gb each) and HD Drive for Data VHDX. Have 16GB of memory. Recommand you get MEMORY and Storage Space. SSD is great but for Lab work get a HD. i7 will not help with anything so i think the i5 is your best bet. And nothing everything needs lots of memory and cpu. Most of mine are single core with 1-2GB memory, and some of my linux are just 512MB (TImeMachine). Also visit Reddit.com/r/homelab some great help there.

 IF the motherboard supports all the xeon features.

 

I guess it comes down to what you are doing. Most of my VMs are doing number but having the power of quad core for Steam InHome Streaming helps me alot.

Well, I do a lot of video encoding, and storing. Much like a lot of people in this day and age, I do pirate music/movies/tv-shows. I was looking at building a storage server specifically to host all my data, but Budman pointed out that it wouldn't be necessary. I have a massive media collection. I have 2 types of media, FLAC / MP3 (320kbps), I download tv-shows that I'm interested in, and things my family would enjoy. We don't really watch movies, but my brother loves my media collection. I wanted my Media Server to serve as an encoding platform, as well as a massive storage system. From what BudMan and sc302 have told me, Windows VMs should have 3GB of memory, while Linux/Unix can roll 1 - 2GB and still function properly. I'll have 32GB of Memory for my ESX server.

 

Anyways, I'm looking at refurbished servers for a temporary solution.

I'll swap the MX100 out of my build, and make a note of it.

Dude pull my hair out over nics?  More like your nonstop questions ;)

 

I just answered your PM that ts140 for $369 looks like a good start if you ask me, some memory, quad nic and ssd and your rocking your first esxi box for under $750 that I am sure will be sweet!!  Sent you some links to parts that should work in the PM.

 

intel server quad port $100, 16GB mem for $150 and Samsung 250 850 evo for $120 and think your screaming..

 

That memory stuff was from sc302, I run my storage windows vm with 2GB and it serves up files just fine.. my linux vm has 256MB, my unifi controller vm ubuntu 14.04 is 512, etc..  You don't need 32GB starting out.. 16 is more than enough.. And if you wanted to save a couple of bucks get a 4GB stick and add to that ts140 4GB it comes with and your out the gate to get playing.

 

I have 6 vms running - and I only hav 8GB of ram total.. they are running 24/7/365..  I just updated the w10 vm to build 74 so you can see the memory usage of that on the graph..

 

post-14624-0-34744300-1430826509.png

 

You can always update to more mem if have issue.. You don't need to max everything out at the get go..

 

Keep in mind you can over subscribe as well..  Most of the time your vms are not going to be using all the ram you allocated to them so if your vms add up to more memory than you really have its not going to bring everything down, etc.  While sure we would all want to have 512GB of ram for our VMs on our play/home/lab esxi boxes..  You can have lots of fun/use with lots less..

Dude pull my hair out over nics?  More like your nonstop questions ;)

 

I just answered your PM that ts140 for $369 looks like a good start if you ask me, some memory, quad nic and ssd and your rocking your first esxi box for under $750 that I am sure will be sweet!!  Sent you some links to parts that should work in the PM.

 

intel server quad port $100, 16GB mem for $150 and Samsung 250 850 evo for $120 and think your screaming..

 

What a boss.. My reference to hair pulling was in direction of my non-stop questions. :p

I thnk what we could do on neowin is a guiid on how to setup a ESXi box for a VM test lab as there seems to be a lot of threads getting made here by people who dont quite understand how virtualiation works.

mabey budman and hagis can help out with this.

 

BudMan started one I believe, it just never got pinned and was pushed down the list. I originally suggested this to him. I believe it was a "Post your Build" topic. I wouldn't mind a virtualization topic, explaining thoroughly how to go about it, suggested builds. i.e. dollar ranges, what you need to primarily build for. It'd be Hyper-V too. I'll be doing a similar topic for Water Cooling, because that's what my PC will have on it.

BinaryData, pfSense is a software firewall. You just need to allocate 2 nics from your VMware box and you have a full featured and very powerful firewall.

Here's the download link.

https://www.pfsense.org/download/

There are plenty of install guides on the web but be aware that the latest version 2.2 should use ESXi vnics of type vmxnet3 and not E1000. You also don't need to install VMware tools. Other than that, most guides out there will help.

BinaryData, pfSense is a software firewall. You just need to allocate 2 nics from your VMware box and you have a full featured and very powerful firewall.

Here's the download link.

https://www.pfsense.org/download/

There are plenty of install guides on the web but be aware that the latest version 2.2 should use ESXi vnics of type vmxnet3 and not E1000. You also don't need to install VMware tools. Other than that, most guides out there will help.

 

I would ask sc302 or budman ;)

This topic is now closed to further replies.
  • Posts

    • I sort of agree with you on that. I had a telescope - a real hefty thing, although only around 500CHF - that got me so fascinated about the stars and planets. I would stare for hours, amazed that I could see the craters of the moon or the rings of Saturn in "realtime" (quotations because, y'know, speed of light and whatnot). A friend of mine has a telescope like the one mentioned in the review, and the pictures are amazing to look at. But there is something missing for me. I may as well just go to NASA's website and look through their gallery.
    • As opposed to catching bad press because it's the engine's fault? You didn't really think this through did you? lol. The engine has all the tools a dev needs to optimize their game, Epic isn't gonna hold their hand to make sure they use them. Also, Epic isn't forcing anyone to use Lumen, Nanite or super high resolution meshes and textures. Just because Nanite can render meshes with millions of polygons doesn't mean you should use it like that, in fact, Epic recommends you avoid doing that. Most of the stuttering can easily be fixed by cutting down on unique shaders by using master materials and generating a PSO cache and compiling every shader before loading the game and managing what must be loaded and unloaded at runtime, it's up to the developer to set all that up properly.
    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!