Recommended Posts

 

You will need some good NICs in your ESXi server. Also, don't bother with a hardware firewall, pfSense is far better than that TPlink and perfectly suited to your ESXi box.

For reference, below is my ESXi server.

As for the components you've listed. Definitely avoid the Crucial MX series. Awful firmware and a lot of problems with them.

https://www.google.co.uk/#q=crucial+mx100+bsod

 

 

I'd go with Supermicro instead of MSI motherboards.

Hard disks, yes, as others have stated, avoid Seagate and go WD for HDD, and Samsung 850 (Pro) or SM951 for SSD.

 

ESXi 6.0 box:

1x Lian Li PC-V2130 case (holds 15x 3.5" + 4x SSDs) - PC-V2130B

1x Supermicro X10DRi-T motherboard (DP and 2x Intel10GbE) - MBD-X10DRi-T
1x Antec HCP1300 Platinum PSU (Platinum rated and quiet!) - HCP1300 Platinum
2x Crucial 32GB (16GB x2) CL15 DDR4-2133 ECC 1.2V - CT2C16G4RFD4213
2x Intel Xeon E5-2620V3 6 Core CPU - BX80644E52620V3
2x Noctua NH-U12DX i4 heatsink/fan (Narrow ILM) - NH-U12DX i4
1x LSI 8 Port 6Gbps MegaRAID SAS 9261-8i with BBU (from previous server) - LSI00212
1x LSI 8 Port 6Gbps MegaRAID SAS 9271-8i (from previous server) - LSI00331
1x Noctua NF-A4x10 FLX 40mm fan (for LSI RAID card) - NF-A4x10 FLX
1x Samsung 850 Pro 512GB SSD
2x Intel I350-T4V2 4-port Ethernet Server Adapter (from previous servers) - I350T4V2BLK
1x Kingston DataTraveler Ultimate G3 32GB USB 3.0 (ESXi boot disk) - DTU30G3/32GB
3x Lian Li HD-07A hard drive trays - HD-07A
1x Akasa Siliconized Rubber Fan Pins - 20 Pack (to silence rear fan) - AK-MX003
2x Powercool 20cm Male molex 4pin to 4x SATA Power Braided Cable - Black - M4XSATA
2x Noctua NF-S12A PWM Case Fan 120 mm (to replace noisy Lian Li rear case fans) - NF-S12A
1x Akasa AK-CBUB19-10BK USB 3.0 to USB 2.0 Adapter Cable - AK-CBUB19-10BK
1x Startech 6 inch USB A Female to USB Motherboard 4-Pin Header USB 2.0 Cable (to plug in ESXi boot disk inside case) - USBMBADAPT

 

I was going to get the NICs after I first got it built. When it comes to NICs, I'm fairly lost. I'm behind the times on things, and even BudMan is pulling hair out some times. I looked at pfSense, and their website doesn't seem to do anything. Maybe it's just the network here at work.

Is this an example of what you were referring to;

http://store.pfsense.org/SG2220/

 

 

 

 

I bought over 250 of those MX100s for work and not one issue so far. Been a year or so. After the 840 EVO issues, not sure I'd recommend Samsung. I have an 840 Pro and like it but we bought many 840 EVOs and do see slowness in those after a while.

 

Ironically, the 840 and 850 pro have been deemed the #1, at least as far as Google Searches and SSD Benchmark tests are concerned.

If you think you need massively powerful hardware for virtualisation, you are somewhat missing the point of virtualisation.  My 'server' spends most of its time running at about 200Mhz of utlilisation.  It has a dual core processor and comfortably will run about 10 virtual machines - the roadblock I hit with running more is not so much processor, but RAM (I only have 16GB).

 

My 'server' has a processor that isn't much more powerful than the sort of Atom processors you find in modern tablets.

 

Ultimately it is your money, to spend as you wish.... seems like you have plenty of it to be buying this for a lab...

 

Mm.. I was going to run a number of different things. A few of them would be learning, but some would have live applications on them.

OS1: Server 2008 - Educational

OS2: Server 2012 - Eduacational

OS3: RHEL5.x+ - Educational

OS4: RHEL7.x - Game Host Testing (Friend and I are working on converting a game server from Windows to Linux)

OS5: Windows 7

OS6: Windows 8.x

OS7: Windows 10.x

OS8: RHEL7 - Database/Educational/PHP/HTML/CSS etc..

OS1 - 4, & 8 would be online and running 24/7, the other ones would be more for Educational. Things that could be shut down.

only thing i would add on what all the other guys have said is i would have dual or triple NIC's and break the vmkern out onto one of its own

 

That's the plan boss, i was going to look at grabbing one or two dual or triple port NICs for it. As for the vmkern, I'll cross that bridge when I get to it. :p

My 2cents. I have Intel 4690s, quad core at 3.2GHZ (upto 3.9Ghz) using 65watt (and yes thats not all the time) Running my Server2012 with 6 Hyper-V VMs and is also my Steam InHome Streaming Server (with the help of my GTX750Ti Video Card). I have a 256GB SSD for VM - OS (10-30gb each) and HD Drive for Data VHDX. Have 16GB of memory. Recommand you get MEMORY and Storage Space. SSD is great but for Lab work get a HD. i7 will not help with anything so i think the i5 is your best bet. And nothing everything needs lots of memory and cpu. Most of mine are single core with 1-2GB memory, and some of my linux are just 512MB (TImeMachine). Also visit Reddit.com/r/homelab some great help there.

 IF the motherboard supports all the xeon features.

 

I guess it comes down to what you are doing. Most of my VMs are doing number but having the power of quad core for Steam InHome Streaming helps me alot.

Well, I do a lot of video encoding, and storing. Much like a lot of people in this day and age, I do pirate music/movies/tv-shows. I was looking at building a storage server specifically to host all my data, but Budman pointed out that it wouldn't be necessary. I have a massive media collection. I have 2 types of media, FLAC / MP3 (320kbps), I download tv-shows that I'm interested in, and things my family would enjoy. We don't really watch movies, but my brother loves my media collection. I wanted my Media Server to serve as an encoding platform, as well as a massive storage system. From what BudMan and sc302 have told me, Windows VMs should have 3GB of memory, while Linux/Unix can roll 1 - 2GB and still function properly. I'll have 32GB of Memory for my ESX server.

 

Anyways, I'm looking at refurbished servers for a temporary solution.

I'll swap the MX100 out of my build, and make a note of it.

Dude pull my hair out over nics?  More like your nonstop questions ;)

 

I just answered your PM that ts140 for $369 looks like a good start if you ask me, some memory, quad nic and ssd and your rocking your first esxi box for under $750 that I am sure will be sweet!!  Sent you some links to parts that should work in the PM.

 

intel server quad port $100, 16GB mem for $150 and Samsung 250 850 evo for $120 and think your screaming..

 

That memory stuff was from sc302, I run my storage windows vm with 2GB and it serves up files just fine.. my linux vm has 256MB, my unifi controller vm ubuntu 14.04 is 512, etc..  You don't need 32GB starting out.. 16 is more than enough.. And if you wanted to save a couple of bucks get a 4GB stick and add to that ts140 4GB it comes with and your out the gate to get playing.

 

I have 6 vms running - and I only hav 8GB of ram total.. they are running 24/7/365..  I just updated the w10 vm to build 74 so you can see the memory usage of that on the graph..

 

post-14624-0-34744300-1430826509.png

 

You can always update to more mem if have issue.. You don't need to max everything out at the get go..

 

Keep in mind you can over subscribe as well..  Most of the time your vms are not going to be using all the ram you allocated to them so if your vms add up to more memory than you really have its not going to bring everything down, etc.  While sure we would all want to have 512GB of ram for our VMs on our play/home/lab esxi boxes..  You can have lots of fun/use with lots less..

Dude pull my hair out over nics?  More like your nonstop questions ;)

 

I just answered your PM that ts140 for $369 looks like a good start if you ask me, some memory, quad nic and ssd and your rocking your first esxi box for under $750 that I am sure will be sweet!!  Sent you some links to parts that should work in the PM.

 

intel server quad port $100, 16GB mem for $150 and Samsung 250 850 evo for $120 and think your screaming..

 

What a boss.. My reference to hair pulling was in direction of my non-stop questions. :p

I thnk what we could do on neowin is a guiid on how to setup a ESXi box for a VM test lab as there seems to be a lot of threads getting made here by people who dont quite understand how virtualiation works.

mabey budman and hagis can help out with this.

 

BudMan started one I believe, it just never got pinned and was pushed down the list. I originally suggested this to him. I believe it was a "Post your Build" topic. I wouldn't mind a virtualization topic, explaining thoroughly how to go about it, suggested builds. i.e. dollar ranges, what you need to primarily build for. It'd be Hyper-V too. I'll be doing a similar topic for Water Cooling, because that's what my PC will have on it.

BinaryData, pfSense is a software firewall. You just need to allocate 2 nics from your VMware box and you have a full featured and very powerful firewall.

Here's the download link.

https://www.pfsense.org/download/

There are plenty of install guides on the web but be aware that the latest version 2.2 should use ESXi vnics of type vmxnet3 and not E1000. You also don't need to install VMware tools. Other than that, most guides out there will help.

BinaryData, pfSense is a software firewall. You just need to allocate 2 nics from your VMware box and you have a full featured and very powerful firewall.

Here's the download link.

https://www.pfsense.org/download/

There are plenty of install guides on the web but be aware that the latest version 2.2 should use ESXi vnics of type vmxnet3 and not E1000. You also don't need to install VMware tools. Other than that, most guides out there will help.

 

I would ask sc302 or budman ;)

This topic is now closed to further replies.
  • Posts

    • It's amazing that anyone still uses this bloated trash.
    • @Sayan...I have defended you at various points as I hope you know. This headline however is utter trash...shame on you sir!
    • An actual cosmic "Eye of Sauron" had been looking straight at us all along by Sayan Sen Image by Kovin P. Vasquez via Pexels | Not representative An international team of researchers has solved a long-standing mystery surrounding a distant blazar known as PKS 1424+240, helping explain why it produces some of the brightest high-energy gamma rays and cosmic neutrinos ever observed despite appearing to have a relatively slow-moving jet. The findings were published on June 6 in Astronomy & Astrophysics Letters. The study addresses a broader challenge in astrophysics: understanding how extreme cosmic objects accelerate particles to very high energies and produce very high-energy (VHE) photons and neutrinos. PKS 1424+240 is located billions of light-years from Earth. It has attracted attention for years because it is both a powerful source of VHE gamma rays and the brightest known neutrino-emitting blazar in the sky, according to observations by the IceCube Neutrino Observatory. It is also associated with one of the strongest peaks in IceCube's nine-year neutrino sky map A blazar is a type of active galactic nucleus powered by a supermassive black hole that pulls in surrounding matter and launches jets of plasma moving close to the speed of light. What makes blazars unique is their orientation. One of their jets points almost directly toward Earth, making them appear exceptionally bright across the electromagnetic spectrum and allowing scientists to study some of the most extreme physical processes in the Universe. The scientists exclaimed it's like the 'Eye of Sauron' in deep space. Usually, the brightest gamma-ray-emitting blazars are expected to have jets that appear to move very quickly. However, radio observations of PKS 1424+240 suggested that its jet was moving much more slowly, creating a contradiction that became part of a long-running problem known as the "Doppler factor crisis." To investigate, researchers analyzed 15 years of observations from the Very Long Baseline Array (VLBA), a network of 10 radio antennas spread across the continental United States, Hawaii and St. Croix. Using a technique called Very Long Baseline Interferometry (VLBI), astronomers combine signals from widely separated radio telescopes to create a virtual Earth-sized telescope capable of revealing extremely fine details. The team combined 42 polarization-sensitive radio images collected between 2009 and 2025, creating a much deeper and more detailed view of the jet than had previously been possible. The observations were carried out as part of MOJAVE (Monitoring Of Jets in Active galactic nuclei with VLBA Experiments), a long-running program that studies the brightness, polarization and magnetic field structures of jets produced by active galaxies. The project aims to better understand how activity near supermassive black holes is linked to high-energy radiation and neutrino emission. “When we reconstructed the image, it looked absolutely stunning,” said Yuri Kovalev, lead author of the study and Principal Investigator of the European Research Council-funded MuSES project at the Max Planck Institute for Radio Astronomy. “We have never seen anything quite like it — a near-perfect toroidal magnetic field with a jet, pointing straight at us.” The image revealed an unusual geometry. The researchers found that Earth lies almost directly in line with the jet, with a viewing angle of less than 0.6 degrees. In simple terms, astronomers are looking almost straight down the jet. This turned out to be the key to the mystery. Because the jet is aimed almost directly at Earth, a relativistic effect called Doppler boosting dramatically increases its apparent brightness. The study found that this effect boosts the emission by a factor of about 30 while also making the jet appear slower than it actually is. “This alignment causes a boost in brightness by a factor of 30 or more,” said Jack Livingston, a co-author at the Max Planck Institute for Radio Astronomy. “At the same time, the jet appears to move slowly due to projection effects — a classic optical illusion.” The nearly head-on view also gave scientists a rare look at the jet's magnetic field. Using polarized radio signals, they detected a clear toroidal, or doughnut-shaped, magnetic field component. The observations suggest the jet carries an electric current and that its magnetic field helps launch, shape and stabilize the flow of plasma. Researchers believe this magnetic structure may also play a key role in accelerating particles to energies high enough to produce both gamma rays and neutrinos. “Solving this puzzle confirms that active galactic nuclei with supermassive black holes are not only powerful accelerators of electrons, but also of protons — the origin of the observed high-energy neutrinos,” Kovalev said. The research was conducted under the MuSES (Multi-messenger Studies of Energetic Sources) project, which investigates how active galactic nuclei accelerate particles and generate different cosmic signals, including light and neutrinos. Scientists say understanding how protons are accelerated and linked to neutrino production remains one of the major unanswered questions in astrophysics. The findings help explain why some blazars can appear to have slow jets while still producing extremely bright high-energy emissions. More broadly, the study strengthens the link between relativistic jets, magnetic fields, gamma rays and high-energy neutrinos. Researchers say the results provide new clues about how some of the Universe's most powerful natural particle accelerators work and offer important insights for multimessenger astronomy, which combines different types of cosmic signals to study extreme events in space. Source: European Research Council, EDP Sciences This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Gotenks98 is right... Outlook (new) is absolute trash. Doesn't Mozilla have an Enterprise Version of Firebird?
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      PsYcHoKiLLa
      273
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      72
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!