PCI-E extension/riser cable


Recommended Posts

I'm currently in the process of building a new dual opteron workstation, and given the layout of the motherboard, I'm gonna need a PCI-Express x16 to x16 riser cable in order to mount the GPU. The only issue is, I can't seem to find a x16 to x16 cable that is long enough. I've found no end of longer x16 to x1 cables, although as far as I know, these are gonna be pretty much useless for what I'm trying to do (correct me if I'm wrong here, but I'm assuming that they're useless in this case.)

 

The motherboard is L shaped, so the GPU would sit roughly in the middle of the chassis, with nothing to mount it on. And if I'm honest, I'm not keen on having it just sitting freestanding in the slot, without any other kind of support. There is also an issue with all the slots being placed in a line, rather than next to one another, which makes it impossible to mount the cards anyway, as the other slots stop the card from sitting correctly. I'd also rather not have the back of the card resting against the conductive metal of the CPU cooler.

 

Does anyone have any suggestions/places to buy them from? I've scoured the internet, but as of yet I've had no success.

Link to comment
https://www.neowin.net/forum/topic/1255818-pci-e-extensionriser-cable/
Share on other sites

What kind of case and motherboard are you using? This sounds interesting.

 

There was a project on overclockers where a guy built a PC on a wall with x16 ribbon cables that he had to wrap with emi shielding so they would work. Just found the cable he was using.

 

Cable I used for my steambox: http://www.amazon.com/PCI-E-Express-Extender-Flexible-Extension/dp/B008BZBFTG

Cable the guy used on his build: http://www.mouser.com/ProductDetail/3M/8KC3-0726-0250/?qs=sA3qAAQcQeGUg2lxOdGD%252bA%3D%3D&kpid=940325120&gclid=CjwKEAjw96aqBRDNhM6MtJfE-wYSJADiMfggD7Qe6RUCZrsA5lIi7DOd5i9b36UGOEzg3VulvMsfIxoCa0nw_wcB

 

This is what your looking for correct?

Sure, I'm using a Supermicro H8DGU-F

 

H8DGU_spec.jpg

 

with an OCUK Professional 4U rackmount case (pretty sure that this is just a generic unbranded product that they resell)

 

SA-005-OP_79196_350.jpg

 

Just gotta finish setting some stuff up, and I'll see if I can get a photo of the inside, to make what I'm actually trying to do clearer.

 

 

 

 


What kind of case and motherboard are you using? This sounds interesting.
 
There was a project on overclockers where a guy built a PC on a wall with x16 ribbon cables that he had to wrap with emi shielding so they would work. Just found the cable he was using.
 
Cable I used for my steambox: http://www.amazon.com/PCI-E-Express-Extender-Flexible-Extension/dp/B008BZBFTG
Cable the guy used on his build: http://www.mouser.com/ProductDetail/3M/8KC3-0726-0250/?qs=sA3qAAQcQeGUg2lxOdGD%2bA%3D%3D&kpid=940325120&gclid=CjwKEAjw96aqBRDNhM6MtJfE-wYSJADiMfggD7Qe6RUCZrsA5lIi7DOd5i9b36UGOEzg3VulvMsfIxoCa0nw_wcB
 
This is what your looking for correct?

 

Yeah, that's definitely the right sort of thing. The issue is just finding one long enough.

  • 3 weeks later...

How long does it need to be?

 

Off the top of my head, I'd say about... 50-60 cm. I've found a place that sells suitable 30 cm riser cables, but they're not quite long enough. This is probably a stupid question, but... Would plugging one riser cable into another be a bad idea? While, I can't see why it wouldn't work.. I'm not sure if daisy chaining cables to connect a

Off the top of my head, I'd say about... 50-60 cm. I've found a place that sells suitable 30 cm riser cables, but they're not quite long enough. This is probably a stupid question, but... Would plugging one riser cable into another be a bad idea? While, I can't see why it wouldn't work.. I'm not sure if daisy chaining cables to connect a

Anything longer then 30cm starts to compromise the signal, kinda like ethernet cables max out at roughly 100m. That expensive one is probably a really high quality cable to offset signal loss/ interference. You could try chaining powered risers together as they are so cheap its worth a shot....

  • Like 1

http://www.digikey.com/product-detail/en/8KC3-0726-0500/3M12026-ND/3641403.

 

Like Sikh said, it's the longest one I was able to find as well.

 

http://www.overclock.net/t/1427731/pci-express-extender-cables-benchmarked

 

You can try daisychaining a couple to see if it works.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
    • One of the strangest galaxies in our Universe could help answer some long overdue questions by Sayan Sen Image by Pixabay via Pexels | Not representative An international team of astronomers led by the Department of Astronomy at Tsinghua University has discovered an unusually metal-poor galaxy that may contain signs of first-generation star formation. The galaxy, named Metal-Pristine Galaxy COSMOS Redshift 3 (MPG-CR3), or CR3, was identified using observations from the James Webb Space Telescope (JWST), the Very Large Telescope (VLT), and the Subaru Telescope. The findings, published in The Astrophysical Journal Letters, describe CR3 as the most metal-poor galaxy known from the period known as "cosmic noon," around 11.5 billion years ago. Cosmic noon refers to a period when the universe was producing stars at its highest rate and galaxies were growing rapidly. In astronomy, "metals" refers to all elements heavier than helium, including oxygen, carbon, and iron. Because CR3 contains so few of these heavier elements, researchers say it closely resembles what scientists expect the earliest galaxies in the universe may have looked like. The discovery is significant because it could offer clues about Population III (Pop III) stars, the first generation of stars thought to have formed after the Big Bang. These stars are believed to have formed from gas made almost entirely of hydrogen and helium, before heavier elements were created inside stars and spread across the universe through supernova explosions. Hence this is why CR3 has been referred to as a "living fossil." Scientists have long believed that Population III stars existed only in the very early universe. As more generations of stars formed and died, they enriched surrounding gas with heavier elements, making the conditions needed for metal-free star formation increasingly rare. Because of this, researchers expected the formation of such stars to have largely ended after the epoch of reionization, a period when radiation from the first stars and galaxies transformed the neutral hydrogen filling the universe and made it largely transparent to ultraviolet light. CR3 appears to challenge that idea. The galaxy was observed at a redshift of z = 3.193 ± 0.016. Redshift measures how much light from a distant object has been stretched as the universe expands and helps astronomers determine how far back in time they are looking. In this case, the redshift corresponds to roughly 11.5 billion years ago during cosmic noon. Although the universe was already several billion years old by that point, CR3 shows characteristics more commonly associated with much earlier galaxies. Observations revealed exceptionally strong emissions from hydrogen and helium, including Lyα, Hα, and He I λ10830. Lyα, or Lyman-alpha emission, is a specific wavelength of light produced by hydrogen and is widely used to study distant galaxies. Hα emission is another hydrogen signature commonly used to trace active star formation, while He I λ10830 is produced by helium and can indicate the presence of very hot, young stars. The measured equivalent widths of EW₀(Lyα) = 822 ± 101 Å and EW₀(Hα) = 2814 ± 327 Å are among the highest ever observed in star-forming galaxies. Equivalent width is a measure of the strength of an emission line relative to the surrounding light, and such large values are typically associated with intense and very recent star formation. At the same time, researchers found no statistically significant detections of metal emission lines, including [O III] λλ4959, 5007 and C IV λλ1548, 1550. Emission lines act as chemical fingerprints that reveal which elements are present in a galaxy. Oxygen and carbon lines are commonly seen in galaxies that have already undergone significant chemical enrichment. Their absence in CR3 suggests an unusually pristine environment. Using abundance calibration methods developed with JWST observations, the team placed a 2σ upper limit on the galaxy's gas-phase metallicity of 12+log(O/H)<6.52, corresponding to less than 0.7% of the Sun's metallicity (Z < 7 × 10⁻³ Z⊙). Gas-phase metallicity measures the abundance of heavy elements in a galaxy's gas. A 2σ upper limit indicates that the true value is very unlikely to be higher than the quoted threshold. Even when accounting for uncertainties in the calibration methods, the most conservative limit remains 12+log(O/H)<6.95, making CR3 the most metal-poor galaxy identified at cosmic noon. The galaxy also appears to contain very little dust. Researchers measured a Lyα/Hα flux ratio of 13.9 ± 2.5, a result that suggests negligible dust attenuation, meaning very little of the galaxy's light is being absorbed or scattered by cosmic dust. Because dust is usually produced by earlier generations of stars, this finding further supports the idea that CR3 has experienced very little chemical enrichment. Further analysis using spectral energy distribution modelling, a technique that compares observed light with theoretical models, suggests that CR3 contains an extremely young stellar population only around 2 million years old. The modelling, which used Population III stellar templates, also indicates the galaxy has a stellar mass of approximately 6.1 × 10⁵ M⊙. The symbol M⊙ represents one solar mass, or the mass of the Sun. One of the key questions raised by the discovery is how such a chemically primitive galaxy could exist in a universe that had already spent billions of years producing heavier elements. To investigate this, the researchers examined CR3's surroundings. Their analysis suggests the galaxy may lie in a slightly underdense environment, with a density contrast of roughly δ ≈ −0.12. An underdense region contains less matter and fewer galaxies than average. The team suggests that this relative isolation may have helped preserve pockets of pristine gas. Metal-rich material expelled from nearby galaxies may never have reached CR3, while the lower rate of galaxy mergers and interactions could have slowed the mixing of enriched gas into the system. If future observations confirm these findings, CR3 could provide some of the strongest evidence yet that first-generation star formation continued well after the epoch of reionization. Such a result would challenge the conventional view that pristine star formation ended by z ≳ 6 and suggest that small pockets of metal-free gas survived much longer than previously thought. Researchers stress that more observations will be needed to determine the galaxy's true nature. Future spectroscopic studies with higher resolution and better signal quality could help confirm whether CR3 is genuinely hosting Population III star formation. The discovery is also expected to encourage searches for other similar galaxies, which could help astronomers better understand how the first stars formed and how galaxies evolved in the early universe. Source: Tsinghua University, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • "I think in the immediate absence of a partner to apply relief" In the words of Sterling Archer... "Phrasing!"
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!