Recommended Posts

I've just had my XFX R7850 begun showing up artefacts and crashing the computer, it's over two years old and out of warranty so I'm reluctantly left with no choice to stump up for a new card.

 

Ive paid no attention to the current range and so would just like some advice on choosing please.

I have a Gigabyte mobo.

 

Budget is around

Link to comment
https://www.neowin.net/forum/topic/1256784-graphics-card-suggestions-~/
Share on other sites

Any of the GTX750s would be a choice option - especially if you don't want to pony up for a new PSU atop the GPU change.

 

My current recommendation - ASUS GTX750 DirectCU Silent. http://www.asus.com/us/Graphics_Cards/GTX750DCSL2GD5/

 

Fanless and requires no extra power, either.  It even supports G-Sync and DX12.

On the site he linked, the warranty is 2 years.

 

As for choosing between the cards, I'd look for some review of that Powercolor model to see if it has any kinks. While I don't have any experience with the brand itself, it has been in the GPU business for a very long time.

 

Another thing to take note of, is that the 3xx series will launch next month and since anything not top end will (unfortunately) be a rebrand with higher clocks, they'll probably appear in shops very fast.

Yeah, I said most.

That's mostly in the US though. Can't say I've seen any lifetime warranties in the EU while glancing at their cards although I didn't thoroughly researched this.

If you're really on a budget you should get the Nvidia because the AMD uses more electricity at idle and for gaming and that will cost you more money down the road.

Yeah, an insignificant amount. (apply video logic to AMD vs NV)

 

That's mostly in the US though. Can't say I've seen any lifetime warranties in the EU while glancing at their cards although I didn't thoroughly researched this.

Yeah, an insignificant amount. (apply video logic to AMD vs NV)

 

 

Except the efficiency of the Nvidia over the AMD is much better than the efficiency of Intel vs AMD.

 

Nvidia cards also don't degrade and get artifacts and crazy glitches after a year like my AMD cards did.

  • Like 2

Except the efficiency of the Nvidia over the AMD is much better than the efficiency of Intel vs AMD.

 

Nvidia cards also don't degrade and get artifacts and crazy glitches after a year like my AMD cards did.

I doubt there's much difference when it comes to percentages. Regardless, it's still pocket change difference at the end of the year.

 

As for your second claim, I hope you have some proof of that being a widespread issue and that it affects current cards (if it happened at all the way you make it sound).

 

Fun fact about Nvidia: owners of previous generation cards are pretty ###### right now because Nvidia is neglecting them so much that a 780 Ti is equal at best to a 970 in Witcher 3 and Project Cars (Gameworks titles btw). Considering their next generation will be Pascal which will feature HBM memory (an even bigger difference than the one between Kepler and Maxwell), I'd expect Maxwell to go the way of the dodo once it's released. Say what you will about AMD, but they support their old cards.

I doubt there's much difference when it comes to percentages. Regardless, it's still pocket change difference at the end of the year.

 

As for your second claim, I hope you have some proof of that being a widespread issue and that it affects current cards (if it happened at all the way you make it sound).

 

Fun fact about Nvidia: owners of previous generation cards are pretty ###### right now because Nvidia is neglecting them so much that a 780 Ti is equal at best to a 970 in Witcher 3 and Project Cars (Gameworks titles btw). Considering their next generation will be Pascal which will feature HBM memory (an even bigger difference than the one between Kepler and Maxwell), I'd expect Maxwell to go the way of the dodo once it's released. Say what you will about AMD, but they support their old cards.

 

 

The support for ancient devices is why their drivers blow, you have to call it quits eventually, personally I thing 3 generations is more than enough to support, anything older is a waste of resources and AMD can't afford to be wasteful as it is

The support for ancient devices is why their drivers blow, you have to call it quits eventually, personally I thing 3 generations is more than enough to support, anything older is a waste of resources and AMD can't afford to be wasteful as it is

When's the last time you've used their drivers as the "their drivers blow" skit is a mummified horse by now. While I personally don't have any issues right now, from reading comment threads on both AMD and Nvidia driver release threads (on Guru3D), there are an equal amount of issues affecting both camps. While AMD may support too many generations (5 currently, although a good chunk are rebrands) it's still better for a consumer than just supporting only the latest one and crippling anything older.

When's the last time you've used their drivers as the "their drivers blow" skit is a mummified horse by now. While I personally don't have any issues right now, from reading comment threads on both AMD and Nvidia driver release threads (on Guru3D), there are an equal amount of issues affecting both camps. While AMD may support too many generations (5 currently, although a good chunk are rebrands) it's still better for a consumer than just supporting only the latest one and crippling anything older.

Not since 08, and everything I'm heading since makes me about them completely still

There's nothing wrong with AMD's drivers, ignore the silly fearmongering. I own an R9 280x, and before that I owned a 6950, a 5770, and a 4950 and the drivers were rock solid, I've had maybe 3 or 4 driver crashes in 6 years of AMD cards and most of those were caused by Valve's Hammer map editor.

I work a lot with AMD drivers for switchable graphics devices.

 

So from my experience it is best if you go with Nvidia. Especially if you are considering Windows 10.

 

Frankly speaking AMD was nearly down to a skeleton crew in terms of driver development.... and it shows in code, features and performance.

 

I wish it wasn't so. If you check the Windows Insider bug reports for drivers AMD is pretty much at the top with all sorts of interesting issues.

Not since 08, and everything I'm heading since makes me about them completely still

That sounds about right, the good ol' "I've used AMD cards when they were called ATI and nothing changed since then".

I work a lot with AMD drivers for switchable graphics devices.

 

So from my experience it is best if you go with Nvidia. Especially if you are considering Windows 10.

 

Frankly speaking AMD was nearly down to a skeleton crew in terms of driver development.... and it shows in code, features and performance.

 

I wish it wasn't so. If you check the Windows Insider bug reports for drivers AMD is pretty much at the top with all sorts of interesting issues.

See, I was with you when you started mentioning switchable graphics because that's where I've seen the bulk of current complaints about their drivers and where they are in a worse position than the competition (didn't mention the since this topic is about desktop GPUs), but then you go on and lie about code/features/performance. I guess the Omega driver, Mantle, TressFX, etc. never happened in your world.

 

By Windows Insider you mean W10 right which is unfinished right? And it's not like Nvidia's drivers are rock solid for it even though they have an "official" one out.

I work a lot with AMD drivers for switchable graphics devices.

 

So from my experience it is best if you go with Nvidia. Especially if you are considering Windows 10.

 

Frankly speaking AMD was nearly down to a skeleton crew in terms of driver development.... and it shows in code, features and performance.

 

I wish it wasn't so. If you check the Windows Insider bug reports for drivers AMD is pretty much at the top with all sorts of interesting issues.

 

I don't know why this has to be illustrated over and over again, but...

 

Windows 10 is UNFINISHED SOFTWARE.

 

Stable OSes... never had problems with AMD drivers.

 

See, I was with you when you started mentioning switchable graphics because that's where I've seen the bulk of current complaints about their drivers and where they are in a worse position than the competition (didn't mention the since this topic is about desktop GPUs), but then you go on and lie about code/features/performance. I guess the Omega driver, Mantle, TressFX, etc. never happened in your world.

 

By Windows Insider you mean W10 right which is unfinished right? And it's not like Nvidia's drivers are rock solid for it even though they have an "official" one out.

 

For threads sake I will glance over the point of you calling me a liar.

 

The amount of setups I come across isn't solely restricted to switchable cards but PXAI setups essentially allowed me to look into the code of CCC and into the kernel.

 

The first thing I advise you, is to understand that AMD as a company is short staffed, has a low employee retention rate and a bulk of their driver development team left over the years. Those Samsungs buyout reports aren't just fairy tales.

 

Currently the graphics division rides on creating new cards and fixating all their support on them. So the argument of AMD actively supporting older platforms is moot as Nvidia has a far deeper reache of support for older cards. Especially when it comes to supporting DX12 on much older Nvidia cards for Windows 10.

 

A huge shift in their strategy since the ATI days is to rely on their marketing. None the less Omega and TressFX is a huge part of that exact marketing campaign. I guess giving drivers special names is enough for some people these days. So all in all Mantle is one of the best techs to come out of AMD, unfortunately not without its issues.

 

Check out AMDs announcement on creating a "Tiger Team" which is supposed to respond to bug reports in a faster and more efficient way ( They are hiring now). Also a nice marketing move which was largely ridiculed by the community. Don't expect them to mention Tiger Team ever again.

 

One example of their marketing department doing "magic" is the "reintroduction" of GPUDownScalling features into their drivers with a nice new slogan of Virtual Super Resolution. Ensuring to the community that only new cards could support such a feature as it relies on an integrated special "chip".

 

Long story short... a quick changing of a few dwords showed everyone that everything down to an HD5000 supports this magic feature. Suffice to say that this backfired badly for AMD.

 

Now with the release of Windows 10122 Gabe Aul send out a tweet on how the recent AMD drivers cause quite a few issues for the OS and that AMD users should be aware of upgrading until AMD has a chance to fix it.

 

Unfortunately their fix failed and users are still reporting bugs with Edge/Spartan among other things.

 

Another example is the freesync driver for Crossfire setups. Wake me up when this happens.

 

Another personal example would be a current bug on AMD drivers that was reported 1,3 years ago which I have been looking into with an MS graphics tech.

 

AMD will hopefully fix it ... seeing as how they broke it for Windows 8.1 to begin with.

 

Nvidia had 4 WHQL drivers out for Windows 10. Guess how many WHQL drivers AMD had throughout all this year?!

 

 

 

PS. Next time watch your mouth.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!