ipod in windows that started in Mac


Recommended Posts

yes, you need to format the ipod for windows, using windows. I too have an Ipod and i love it dearly.. lol. But you need to format it under windows to make it run in windows. Basically, i cannot take my ipod and try it on a mac because it doesn't recognize it. Hope that helps ya

  Nestea_M@n said:
yes, you need to format the ipod for windows, using windows. I too have an Ipod and i love it dearly.. lol. But you need to format it under windows to make it run in windows. Basically, i cannot take my ipod and try it on a mac because it doesn't recognize it. Hope that helps ya

Wait, here, you confused me a little bit. So I formatted the thing in Windows and that did not help.

Am I supposed to format it in Windows with an Apple utility?

I don't know what you guys are talking about, but when I first got my iPod, I formatted it on my Mac, and now I take it inbetween my Mac and PC and it is flawless. I use it on both with no problem. I have also used it on both with a windows format. It does not matter what computer you used to format.

The only thing I noticed is that whatever computer you format it on, needs to be the same computer that you use to update the software on the iPod when a software update comes out.

Well that is very interesting, because my dad first used it on our mac, then brought it to the windows computer and for some strange reason it won't work at all. We even went as far as reformatting the whole disk in FAT 32 in Windows and I just plugged it into the Mac again and none of those files were actually erased!

Could someone walk an idiot through this? I have no trouble whatsoever with Windows native applications and hardware. I have personally never experienced as much difficulty trying to get something to "work right."

Thanks for all of your help thus far!

I really appreciate it.

  adamp2p said:
Man! Let me tell you something. As an owner of a Mac and Windows PC's Mac users know so much less about their computers than windows, ****!

It takes 100X longer to get a response here than on any other forum!

You're kidding, right? First post was at 14:45 (what it says), first response 4min later, that's not bad. Are you just waiting around for an answer to do this?

Oh, and you are asking to format a Mac formatted iPod over to Windows, wouldn't this be more apporiate maybe in the normal hardware section? =P The PDA, Tablet & Mobile Devices forum is where a lot of the iPod posts are at now. =P That and you also have to figure in that there are less Mac users here than Windows users, thus the response time might be a little on the slow side.

Did you try going to Apple's website and downloading the iPod software? http://www.apple.com/ipod/download/ is your link for the download.

You have to be a bit more patient than what you are, you only waited a little over an hour to post again to complain about the response time. =P

  adamp2p said:
Well that is very interesting, because my dad first used it on our mac, then brought it to the windows computer and for some strange reason it won't work at all. We even went as far as reformatting the whole disk in FAT 32 in Windows and I just plugged it into the Mac again and none of those files were actually erased!

Could someone walk an idiot through this? I have no trouble whatsoever with Windows native applications and hardware. I have personally never experienced as much difficulty trying to get something to "work right."

Thanks for all of your help thus far!

I really appreciate it.

I really didn't do anything special. I just plugged the iPod into my Mac, ran it through the setup and then began copying files over. After all my music was there, I went over to my windows machine, installed the iPod software and iTunes. Opened iTunes, connected the firewire cord, the little tooltip popped up saying that an iPod was found. It then worked flawlessly.

This is a third generation iPod we are talking about right?

  • 3 weeks later...

You question has been answered already, yet you seem to be still in search for one.

You also show anger and impatience, and these gratuitous comments will only make people less willing to help you. Be patient.

As I said, the answer to your question is already right before your eye: Download the iPod software updater for Windows and format the iPod using that. Pay attention, it shall serve you right.

  KeR said:
yes you do....every time you use it on a different computer or mac you will need to re-format.

NO NO NO! So incorrect.

The generation of the iPod doesn't matter. 1st and 2nd gen came pre-formatted to fat32 for windows and HFS+ for OSX. The 3rd Gen ipod doesn't come formatted. Whatever system you plug it into first...windows or osx...it will automatically format to that file system. Also, OS X will read FAT32, NTFS and HFS+, but windows will not read HFS+.

If you have an iPod formatted with HFS+, it will not work with windows unless you have certain 3rd party software. I used EphPod in this situation and it worked perfectly.

http://docs.info.apple.com/article.html?artnum=60920#faq6

Read questions 6, 7, and 8.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Good bit of updates, if they keep this up until the new hardware lands we could be in for some good surprises.
    • Scientists explain how bigger does not mean better for electric vehicles during colds by Sayan Sen Image by Blomst via Pixabay A new study by Cornell University researchers, working with Tompkins Consolidated Area Transit (TCAT), has found that electric buses use a lot more energy in cold weather, especially in places like Ithaca, where the roads are hilly and winters can be harsh. TCAT started testing seven battery-electric buses (BEBs) in 2021 as part of a pilot program funded by a federal grant. Over two years, the buses ran on 41 different routes in Tompkins County.However,t the buses had issues during colder months, with lower driving range and performance. To understand why, researchers looked at real-world data and developed what they called “Optimal Temperature Zone” (OTZ) models—these models show how much energy the buses would have used in ideal temperatures between 16°C and 30°C. When temperatures dropped to between −4°C and 0°C, the buses used about 48.0% more energy, including both power used to drive and energy regenerated through braking, compared to OTZ predictions. Even in the wider range of −12°C to 10°C, energy use still jumped by 28.6%. Half of this extra energy went into heating the batteries themselves. These bus batteries work best at about 24°C, so when it’s cold, they need extra power to warm up before the bus can even get moving. The other major factor was the cabin’s heating system, especially on urban routes where doors open and close often, letting in cold air. “With an all-electric vehicle, the battery is the only onboard energy source,” said Max Zhang, senior author of the study and a professor at Cornell. “Everything has to come from it.” The study also found that regenerative braking—the process that lets the battery recharge a bit while the bus slows down—didn’t work as well in cold conditions. One reason is that these bus batteries are huge, about eight times bigger than typical electric car batteries, and it’s harder to keep the temperature even across all the battery cells. To improve the buses' performance in winter, the researchers suggested a few short-term fixes: parking them indoors to keep them warmer, charging batteries while they’re still warm, and reducing the length of time the doors stay open during stops. On a bigger scale, cities might need to rethink their transit infrastructure. That includes checking how many charging stations they have, whether buses can be kept in heated garages, and how to adjust routes and schedules. “You have to try to optimize the schedule of all of the buses and to consider the capability of your infrastructure – how many charging stations you have, and if you have your own garage,” said lead author and PhD student Jintao Gu. The team found that rural routes, which have fewer stops, use less extra energy in cold weather than urban ones. That could help transit agencies decide which routes are better for electric buses during colder months. “One of the lessons we’ve learned is that these buses should be designed for the whole country, including states with colder climates,” said Zhang. “But any lessons are good lessons. This helps us learn as a society and do better.” Source: Cornell University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act of 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • Appears to be 150W PSU (Core Ultra 9) so most power delivery ports wouldn't even support it.
  • Recent Achievements

    • Dedicated
      tesla maxwell earned a badge
      Dedicated
    • Dedicated
      Camlann earned a badge
      Dedicated
    • Week One Done
      fredss earned a badge
      Week One Done
    • Dedicated
      fabioc earned a badge
      Dedicated
    • Week One Done
      GoForma earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      636
    2. 2
      Michael Scrip
      224
    3. 3
      ATLien_0
      219
    4. 4
      +FloatingFatMan
      142
    5. 5
      Xenon
      136
  • Tell a friend

    Love Neowin? Tell a friend!