Recommended Posts

^ yup would be a an issue.. Kind of hard to get 120 if your wan is only 100.. Would of hoped you would of looked at that before buying that router.. Can you return it?

This is perfect example at the problem with marketing nonsense.. States on their website

"802.11ac dual-band wireless at up to 733 Mbps for high-performance wireless"  So that would be 300 on 2.4 and 433 on 5ghz.  Which kind of hard to get anywhere close to that then you connect the device via 100mbps wire..  So even if on 300 for the 2.4 and make that down to realistic /2 or 150 vs the 300PHY I still can not get anywhere close to that because the wire is limited to 100 or about mid 90's since you can never actually see full wire speed in real world performance because of overhead of protocols, etc..

And if your doing wireless to wireless that is automatic /2 of the bandwidth.. So where exactly is anyone getting anywhere close to those numbers.. Just kind of nonsense to make a device with 433 for 5ghz and then not even put in a gig interface.  So you could get the actual real world performance of 433 of about 200..

Edited by BudMan
  • Like 1

Well what is your budget?  And do you have any AC devices?  Or just N?  And your devices do 5ghz?  What is the layout of the place - 5ghz does have a lot of coverage area.  To be honest not really a big fan of any wifi routers for good wifi coverage.  To really cover a place in good wifi coverage you need multiple AP around the place.  Even here in the US where walls are very wifi friendly ;)  You should really look to something like unifi to get some cost effective AP what are POE and allow you to proper place them in the ceiling for good coverage.  The new AC line are very price friendly at range from 89 to 149 here in the US.

Now that you are getting to over 100mbps internet speed, kind of pointless if that all in one soho router gives you crap speeds where you most need wifi coverage in the house, etc.  And doesn't leverage that speed everyone in the house.  I just put a new uap-ac-lr in the kitchen to give me full coverage even out on the patio.  Max out my internet even on the patio now - my new 1st world problem is my older ipad wifi is not fast enough ;) hehehe

I have the 1043ND and I can say that it doesn't handle a lot of open connections very well but it would probably do what you need in terms of bandwidth.  Just expect to put limiters on torrent like programs.  You can also put DDWRT on it but it makes the wireless a bit slower. 

 

How's the compatibility and stability on that UAP-AC-LR?

I have the 1043ND and I can say that it doesn't handle a lot of open connections very well but it would probably do what you need in terms of bandwidth.  Just expect to put limiters on torrent like programs.  You can also put DDWRT on it but it makes the wireless a bit slower. 

 

How's the compatibility and stability on that UAP-AC-LR?

How many connections do you then have on torrents? Does DDWRT fix that? Before my connection upgrade I had a small TP-Link router which also dropped WiFi a lot of times, but I googled a bit and found a solution, had no problem after that, but it doesn't support that high speeds- 

If your running torrents over wifi - your doing it wrong!!  That protocol is so freaking chatty it would be horrific over wifi for anything else trying to use that wifi.. 

I have 2 iphones 5s and 5c, 3 laptops all with different wifi cards and my son's nexus all using it without any issues.  Along with harmony hub and nest thermostat that connect without any issues.

No this is all wired.  Only mobile, laptops and printers are on WiFi.  DDWRT helped with open connections but cuts your wireless in half I think.  As long as you don't push it with torrents it was a decent router.  I would leave the stock firmware because of the wireless performance.

If your running torrents over wifi - your doing it wrong!!  That protocol is so freaking chatty it would be horrific over wifi for anything else trying to use that wifi.. 

I have 2 iphones 5s and 5c, 3 laptops all with different wifi cards and my son's nexus all using it without any issues.  Along with harmony hub and nest thermostat that connect without any issues.

No I'm not doing that. I just had 4 phones and a laptop on WiFi. I'm actually seriously considering buying Asus RT-N66U now. It's a bit pricey but I hope it's worth the money!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • JetBrains is working to cut false positives in RustRover 2026.2 by David Uzondu Recently, JetBrains released the fifth EAP build of its dedicated IDE, RustRover 2026.2, bringing improvements like a Run gutter icon for criterion_main! macro benchmarking and a feature that alerts you when there are unused traits in your current scope. Now, the company is out with a blog post addressing one of the "most common" complaints from users: false positives. In RustRover, a false positive occurs when the editor incorrectly highlights something as an error even though the project compiles and runs successfully. This mismatch flags a gap between the IDE's internal intelligence and the actual compiler. When the editor flashes red warnings over perfectly valid code, developers lose trust in the tool, which stalls momentum. Traditionally, RustRover runs cargo check to detect compiler errors and warnings, but it also relies on its own code analysis engine to power real-time features. To provide quick feedback, this engine parses your source code into a syntax tree while inferring types and resolving names as you type. Because this engine must work on broken, half-written code and react instantly, its logic sometimes diverges from the compiler's, producing false positives that do not exist in the compiler's eyes. JetBrains said that it has a "dedicated task force" focused specifically on identifying and fixing false positives by analyzing user reports and examining large-scale open-source projects. To speed up this process, the team built an internal system modeled after Crater, the famous Rust project that compiles and runs tests for every single crate published on crates.io. This automated pipeline compares the diagnostics from RustRover's analysis with actual compiler output to catch discrepancies before they reach users, ensuring smoother workflows. RustRover, for those who're unaware, is a dedicated IDE designed specifically for Rust developers. It's been around for a couple of years now, providing features like built-in debugging via LLDB, seamless cargo integration, advanced macro expansion, and HTML support. JetBrains distributes the app under two licensing models: a paid commercial subscription and a free option for non-commercial use.
    • Last year I bought the 2TB variant for $114 on Amazon. That's crazy that the 1TB is now 67% more expensive for half the storage, even with the newer T9 already on the market. And that's considered a good deal.
    • You can disable all non needed features from Brave. There is also Brave Origin which removes them entirely and it is free for Linux.
    • I wish I could use Brave but the tab suspension feature is horrible. It doesn't suspend them like Edge does. Even after 2h open with 70+ tabs (same as Edge), it has 2GB more consumption than Edge for no reason.
    • TeamViewer 15.78.4.0 by Razvan Serea TeamViewer is the fast, simple and friendly solution for remote access over the Internet - all applications in one single, very affordable module. Remote control of computers over the Internet, Instantly take control over a computer anywhere on the Internet, even through firewalls. No installation required, just use it fast and secure. Training, sales and teamwork, TeamViewer can also be used to present your desktop to a partner on the Internet. Show and share your software, PowerPoint presentations etc. File transfer, chat and more, Share your files, chat, switch the direction during a teamwork session, and a lot more is included in TeamViewer. TeamViewer key features: Cross-platform remote access (Windows, macOS, Linux, Android, iOS, IoT) Attended and unattended remote control Secure file transfer between devices Remote printing to local printers Multi-monitor support with easy switching Wake-on-LAN for sleeping devices Session links for quick connections (no password sharing) Web client access (no installation needed) End-to-end encryption (AES-256) Two-factor authentication and access controls AI-powered session insights and reporting Mass deployment and device management tools Customizable allow/block lists for security Command line and script execution remotely Performance monitoring and analytics dashboards TeamViewer 15.78.4.0 changelog: Improvements Permissions inheritance has been improved, increasing reliability when permissions are assigned to user group managers. Bugfixes Fixed a bug where 'Show details' button was not showing up on command bar upon selection of a device group. Fixed a bug which was causing the legacy groups to disappear when applying hide offline filter in basic view. Fixed a bug where devices were loading infinitely after login. Fixed a bug which was causing crash in application. Download: TeamViewer 15.78.4.0 | 32-bit | Portable | Mac | ~70.0 MB (Free for personal use) View: TeamViewer Home Page | Release Notes | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      PsYcHoKiLLa
      231
    3. 3
      Edouard
      135
    4. 4
      ATLien_0
      88
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!