Forward the Internet connection to a second router for network management (Bridge vs DMZ)


Recommended Posts

Hi,

For optical fiber, a particular ISP I'm interested in, installs a ONT+Router all-in-one device (Huawei) which does not support bridge mode (maybe the router itself supports it but the functionality was probably removed by the ISP). But I don't like this router, I want to use my own (Asus AC68U) to manage my whole LAN. Usually, one would connect the Huawei to the Asus in bridge mode and have the Asus manage everything. But like I said, there's no bridge mode in the Huawei.

I believe the Huawei supports DMZ and I can redirect all the traffic from the Huawei to the Asus and still have the Asus manage everything. However, my question is, in practical terms, what exactly is the difference between redirecting all the traffic with bridge mode and redirecting all the traffic with DMZ. I'm really looking for practical pros and cons. Like "in mode X you can do this but not that".

Would I be able to achieve what I want - have the Asus manage the Internet connection to my LAN (like NAT, Firewall, Port Forwardin, DDNS, VPN, etc...) - with DMZ? Or is there anything that would only be possible in bridge mode?

What model of Huawei is it? Usually when ISP's do things like this, you find the MAC and clone it onto your own device. That's what I have done in the past with an ISP over here in the UK.

The problem with double nat.. For one is a performance hit, be it slight - it still a hit. You prob could have issues with isakmp since this a static port and headers prob going to get messed up in the double nat.  This is used in IKE which is IPSEC vpn connections mostly.. Do you do any of that?  That can make it more complicated, but should still be able to get around it.

Normally you would avoid a double nat as much as possible..  If not in the dmz of the first router it becomes a real pain to control port forwarding, stuff like UPnP would not work.  But if in the dmz you should not have all that many issues other than the slight performance hit of a double nat.  You could have issues with ftp for sure depending on the routers and ftp helpers, if no helper trying to do active or run a ftp server behind could be broken..  Passive could even be a problem if 1st router doesn't have a helper for ftp..  I wouldn't worry about that too much, unless you run a ftp server to the public.. Or use it all the time - its really a deprecated protocol and sftp should be used anyway.

Normally a DMZ is not a bridge, depending on the router it might not forward specific traffic or might do something weird with some ports being listened on the 1st router and not forwarding correctly.  Like I said should be avoided!!!!  But if you have to do it, its not the end of the freaking world.. More than likely you can get everything to work..

Is this a business line or home connection.  Business I would think you could demand bridge mode..Do you plan on playing lots of say console games behind this setup?  Stuff that does with UPnP and or likes static source ports could have problems, but since dmz in first router you should be ok.. For example if console game says via UPnP hey make sure you use source port X on when you nat because who I am connecting too expects that but then outside router just nats it to some random port that is open in its state table.  Where you connecting might say hey that is wrong source port.

Dmz is not the same as actual public IP, the router is doing forwards and napt and ports are going to get changed twice, this could cause issues since while it only done once and depending on the router you could have control over this When you do your specific forwards.  But since its being done twice and outer one is just in auto mode with everything being forwarded to first router..

I would really push for bridge mode on the isp device.  But if a no go, its a slight performance hit..  Why exactly do you want your own router?  To run your wifi, just use it as access point and just use the isp to control forwards, now only 1 nat.  Do you run multiple network segments?  Why do you feel you can not just use the isp device as your edge router?

Another issue that can happen, is just crappy device given by isp and when its doing nat and having to keep track of a lot of connections (p2p for example - especially if multiple users of it) the isp device nat falls down.. But if it was just bridging the connection the user could use a better device that can handle the number of states and not have an issue, etc..

 

 

Edited by BudMan
  On 10/11/2015 at 08:35, John Teacake said:

What model of Huawei is it? Usually when ISP's do things like this, you find the MAC and clone it onto your own device. That's what I have done in the past with an ISP over here in the UK.

Huawei HG8247H. If by cloning the MAC you mean you'd only use my own device, that will not work. I still need to use the ISP's device for IPTV and VoIP. Also, I believe my credentials are builtin in the device, not sure about this though.

  On 10/11/2015 at 13:02, BudMan said:

The problem with double nat.. For one is a performance hit, be it slight - it still a hit. You prob could have issues with isakmp since this a static port and headers prob going to get messed up in the double nat.  This is used in IKE which is IPSEC vpn connections mostly.. Do you do any of that?  That can make it more complicated, but should still be able to get around it.

I'm not sure... I want to have the VPN service on the Asus turned on so I can connect to my LAN and access my internal services. I do not want VPN to forward all my traffic through my home connection. I'd like to have the possibility though, but I probably won't use it.

  On 10/11/2015 at 13:02, BudMan said:

Normally you would avoid a double nat as much as possible..  If not in the dmz of the first router it becomes a real pain to control port forwarding, stuff like UPnP would not work.

For security purposes I usually turn UPnP off and open the required ports as necessary for any games I play (which are not that many to be honest).

  On 10/11/2015 at 13:02, BudMan said:

But if you have to do it, its not the end of the freaking world.. More than likely you can get everything to work..

I'm afraid I do because the bridge functionality is disabled and I'm not sure anybody has yet found a way to enable it (if the router supports it, I believe it does).

  On 10/11/2015 at 13:02, BudMan said:

Is this a business line or home connection.  Business I would think you could demand bridge mode..Do you plan on playing lots of say console games behind this setup?  Stuff that does with UPnP and or likes static source ports could have problems, but since dmz in first router you should be ok.. For example if console game says via UPnP hey make sure you use source port X on when you nat because who I am connecting too expects that but then outside router just nats it to some random port that is open in its state table.  Where you connecting might say hey that is wrong source port.

Home. I'm not in a position to demand anything. And the only way to request something is after signing the contract, which makes it worse. AFAIK, they no longer have the old ONT+Router combo available anymore, they install the new Huawei for all new clients. Like I previously said, I prefer to disable UPnP and forward all the needed ports. Do you see any issues with this setup?

  On 10/11/2015 at 13:02, BudMan said:

I would really push for bridge mode on the isp device.  But if a no go, its a slight performance hit..  Why exactly do you want your own router?  To run your wifi, just use it as access point and just use the isp to control forwards, now only 1 nat.  Do you run multiple network segments?  Why do you feel you can not just use the isp device as your edge router?

Because the ISP router sucks and doesn't have all the features I want. I've read many reviews on the Asus routers and they have exactly what I want and like in a router. It's not just the wifi, it's everything. To name a few, VPN Server, DDNS, dual wireless, QoS and proper IP/MAC management (they usually suck on those ISP routers). Also, the Asus has constant firmware development and there's the excellent Merlin firmware with extra features that I need (for one, DDNS to run a custom script so I can have my own custom domain). I just wanted to delegate the Internet/LAN management to the Asus as much as possible and leave the ISP router for IPTV and VoIP only.

Thanks for the long and descriptive post, that's exactly the kind of answer I was looking for :)

"proper IP/MAC management"

What is this exactly - setting a reservation?  While I agree with you some very limited dhcp servers in many soho routers...  I don't recall seeing one that doesn't do a reservation.  What I have seen is the lack of setting any other options like changing the gateway or dns, or other options you can set with dhcp, etc.

Again double nat would not be the preferred setup, but it is a very workable solution if you don't have the choice.

I have a modem with Time Warner that I couldn't get bridged (hidden menu and nothing I could find would get me into it).  I just called them up, asked to be transferred to Tier 2 support, and them accessed it and bridged it for me.  Then I connected my own gear.  Try giving them a call if you haven't.

  On 16/11/2015 at 12:59, BudMan said:

"proper IP/MAC management"

Like, machine A has MAC A:B:C:D and static IP 1.2.3.4 and it's named "My Personal Device (on the router itself) than I can forward ports, control network access and stuff like that per machine identified by the name I previously selected instead of trying to identify the device I want by MAC or IP address. It's very basic but a lot of devices fail having a good interface to manage stuff like this.

  On 16/11/2015 at 13:12, farmeunit said:

I have a modem with Time Warner that I couldn't get bridged (hidden menu and nothing I could find would get me into it).  I just called them up, asked to be transferred to Tier 2 support, and them accessed it and bridged it for me.  Then I connected my own gear.  Try giving them a call if you haven't.

Yeah, I'm gonna try that but unfortunately the kind of technical support we get around here is not very good, they are not very comprehensive. In other words, they really don't care.

So that is simple dhcp server reservation..  And then ability to use an alias in firewall rules, etc. That would not really be a reason to use one device over another if you ask me..   . But sure if you like that feature of a firmware then ok..

You asked me why I wanted to use my own device and I gave you a few reasons, that's just one of them. But it's certainly not the most important. I wouldn't buy and use my own device just for that.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I enjoy using Discover Weekly. I have found new music using it. Just sometimes it goes off the rails and doesn't remember I don't like rap. I'm not sure this update is anything helpful, but I guess I'll try it if it comes to free accounts.
    • Yep, I got 250 mbps down / 50 mbps up on Qatar last week and about a 30 ms ping.
    • Here are all the new features added to Microsoft 365 Copilot in June 2025 by Usama Jawad Towards the end of each month, Microsoft publishes a roundup of the features that it added to some of its popular software in the previous four weeks. We have already talked about the new capabilities introduced in Excel and Teams during the month of June 2025, and now, it's time to talk about Microsoft 365 Copilot. We'll start off with admin-facing capabilities since there are only a few of them. For starters, the usage metrics for Copilot in the Copilot Analytics tool now have new prompt categories that give more insights as to how users are engaging with Copilot. This feature has just begun rolling out, but another enhancement to the usage metrics that is already available is dedicated statistics for intelligent meeting recaps. Finally, Microsoft 365 admins can now view and manage their inventory of agents and connectors and also have more granular control over costs and billing policies. On the user side of things, we have intelligent assistance in Copilot Chat, powered by ContextIQ. This layer of intelligence can scope prompts to internal (SharePoint, OneDrive) and external data sources, find files in the chat, and proactively offer relevant suggestions as you type. In the same vein, the Copilot mobile app is being updated so you can talk to the AI in a natural manner using your voice. In addition, users can also get access to deep reasoning agents such as Researcher and Analyst for more complex and research-oriented needs. The Create experience in the app is also being updated with the ability to generate stories and branded templates. Other interesting Copilot capabilities rolling out to Edge customers are the ability to prompt the AI through the search bar, access agents from within the browser, and take advantage of Copilot's impressive text summarization capabilities. That's not all though, other features in tow include: Enhancements to Copilot in Outlook: Schedule meetings through Copilot chat, summarization of email attachments, a new sidebar experience in the classic Outlook app, meeting preparation, and automated meeting invite creation Improved image generation and large file handling in Copilot Chat: More photorealistic image generation with better text depiction, ability to generate longer summaries from bigger files, and PDF scanning capabilities for insights Memory in Copilot: Copilot will now remember certain items from your conversation and you can modify or delete them Transferred calls summary with Copilot in Teams Phone: Generate a summary of a call and transfer it to a target New file extension for Copilot Pages: Copilot Pages will now have .page extension with an updated file icon Copilot Notebooks availability in OneNote: We already covered this in detail here Seamlessly add brand-approved images with Copilot in PowerPoint: Integration of Copilot with SharePoint Organization Asset Library (OAL) and Templafy asset libraries Explain formulas on the grid with Copilot in Excel: Self-explanatory, exactly what it says on the tin Expanded availability for the Microsoft 365 Copilot app: Availability of the Microsoft 365 Copilot app on Mac You can read more details about each of the aforementioned features here.
    • Damn, I blocked OldGuru a long time ago and you have to go and quote them so I have to read that creepy a$$ take. LOL Anyway 100% that dude can't find women that will have sex with him.
    • OneNote for Windows gets support for Dynamic DPI by Usama Jawad OneNote for Windows (part of Microsoft 365) is a pretty useful app if you're actively engaged in note-taking activities and also appreciate some rich text formatting capabilities. In fact, it also offers some decent integrations with Copilot, which make it an important piece of software in productivity-based environments. Now, Microsoft has introduced a feature that will likely make people with multi-monitor setups very happy. The OneNote for Windows application now supports Dynamic DPI (dots per inch). What this means is that you can use OneNote across any screen and it will scale according to the display's resolution, and you won't get a disconcerting and distracting blurring effect. You can extend your display to a high-resolution monitor and shift OneNote across displays without a hitch or any distraction. This is similar to the UX that is already present in Word, Excel, and PowerPoint. This Dynamic DPI support not only extends to the main text area but also to the section tabs, the Notebooks pane, drop-down menus, and Copilot Notebooks. All of these should look crisp and polished moving forward, without any manual adjustment or even an app restart required from the user's side. Microsoft has highlighted that it was encouraged to work on this capability after receiving user feedback from customers in this area. Dynamic DPI is now available to Current Channel (CC) customers on OneNote for Windows, running Version 2504 (Build 16.0.18827.20042) or later. That's not all, though. Another smaller enhancement present in OneNote moving forward is a revamped setup experience when you launch OneNote on a new Windows device for the first time. You will now receive a list of your five most recently used (MRU) notebooks that will open instantaneusly with a click. If you have more than five notebooks, you can pick and choose the files that you want to open. That said, Microsoft is looking to expand and improve on this experience in the future since it is fairly limited right now.
  • Recent Achievements

    • Week One Done
      dennis Nebeker earned a badge
      Week One Done
    • One Year In
      timothytoots earned a badge
      One Year In
    • One Month Later
      CHUNWEI earned a badge
      One Month Later
    • Week One Done
      TIGOSS earned a badge
      Week One Done
    • First Post
      henryj earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +FloatingFatMan
      194
    3. 3
      ATLien_0
      163
    4. 4
      Xenon
      78
    5. 5
      Som
      73
  • Tell a friend

    Love Neowin? Tell a friend!