MacBook Pro spill cleanup


Recommended Posts

So, still talking about the same MacBook Pro.

The laptop lid was closed at the time the spill. Water was then sucked into the laptop through the fans and the laptop immediately lost power.

Obviously, what she should have done was to take it immediately to me.

Anyway, from the under side (the side visible from removing the cover), I was able to find three spots of corrosions: two spots close to one fan and one spot close to the other fan. (One spot is under a transistor)

Since I don't have the right screwdrivers, I am currently unable to remove the motherboard so it's possible there are more corrosions on the other side.

----

What's my best options here?

I plan to remove the motherboard and wipe the affected spots with isopropyl alcohol and cross my fingers.

Link to comment
https://www.neowin.net/forum/topic/1279074-macbook-pro-spill-cleanup/
Share on other sites

All you can do, is take it part and inspect the logic board the best you can.. You are on the right track.. Macbook Pros also have a metal housing under the keyboard to help with spills.. If someone spills something on the keyboard, it should catch it.. but speakers is another issue..

I was at a party a few weekends ago and a chick had a fireball gun that shot fireballs shots into peoples mouths.. She was talking to me and didn't realize that she was pulling the trigger down and it drenched my Macbook.. It didn't make it.. 

  • Like 1

Actually you can, and I have done this probably 50 times. that screwdriver is a 5 point torx, apple uses them in everything. If you can get the logic board out, take some johnsons baby shampoo, and some reg water, put the shampoo on the board, get it wet. scrub it good over the corrosion, and rinse the board off. Hit it with a hair dryer, or if you have it, a heat gun. Let it sit for 24/48 hours, put it back in and see if it works. I used to work for simply mac, and this is how i handled sticky stuff spilled in macbooks. You may need to buy a new topcase though, around 150$ on ebay, just make sure you get the right one

 

So, with the help of my EE friend, I was able to determined that the cause of the failure is a single blown capacitor on the motherboard (or logic board for you apple fans).

Apparently, there is someone who is willing to do components repair for $300. What should I advise her?

This is the Late 2011 MacBook Pro 17-inch with Intel Core i7 Sandy Bridge processor and 4 GB RAM.

The photos aren't great, but I can't see any obviously blown caps on the board...

Have you tried booting a minimal system? Try to boot (with the components outside of the casing) just the MLB and I/O board (there are power on pads you can short to turn it on). If that doesn't work, try just the MLB and battery. That's the easiest way to test whether the MLB is at fault.

The machine is at the point now where it's not worth repairing really. Unless you can work out which cap has blown and try to replace it yourself - $300 for what is likely a 50c cap and a few minutes with a soldering iron seems insane.

Unfortunately I don't think you'll get $300 for it working, let alone in the condition it's in. 

Best is to try and sell it for parts. People are still willing to pay a fair bit for the enclosures etc, and suggest she put the cost towards a new MacBook

Not worth repairing IMO. Dump it on Ebay "as-is" or have your computing department recycle it.

However, if you plan on trying a fix, note that PCBs in many modern portable devices are designed to absorb and distribute heat. This helps dump heat by allowing it to radiate across a large surface area. This also happens to make soldering on these boards an absolute nightmare, because it can be difficult to heat a small point up to the temperature necessary to melt the solder while not destroying the component that you want to swap. This board also almost certainly uses lead-free solder. This stuff may have a higher melting temperature than you might expect.

  • 1 month later...
4 minutes ago, illegaloperation said:

I have an update on this.

 

For whatever reason, the computer won't power on with the keyboard connected.

 

With the keyboard disconnected, I am able to power it on with the power-on pads on the motherboard.

Sounds like the cable on the board is shorted or the actual keyboard is shorted. Some keyboards on eBay come with the cable. 

26 minutes ago, fusi0n said:

Sounds like the cable on the board is shorted or the actual keyboard is shorted. Some keyboards on eBay come with the cable. 

Could still be the motherboard, whatever it uses to communicate with the keyboard.  Where's the picture of the blown capacitor?  I took an ASUS router with a blown capacitor to an electronics store and had the capacitor replaced for $20 in less than half an hour.

13 minutes ago, c.grz said:

Could still be the motherboard, whatever it uses to communicate with the keyboard.  Where's the picture of the blown capacitor?  I took an ASUS router with a blown capacitor to an electronics store and had the capacitor replaced for $20 in less than half an hour.

If you look at the top picture, you'll see a yellow spot.

 

In fact, the image below it, I've marked it in red (one on the right).

  • 4 weeks later...

It has been a few weeks since I've completed the repair (and also with a brand new battery as requested) and the laptop is running fine.

 

Annoyingly, she still hasn't pick up the computer nor paid me.

 

Every time I call her, she said that will get it "soon".

My contract gives her 90 days after the completion of the repair to get the computer so it looks like I will be waiting a while.

Stories like this make me glad my tech days are over.
Any repairs I do now are for friends and family so I dont have to worry about not getting paid as I dont charge them anything - 

But they also know I am quick with the "just go get a new one - you got your money's worth out of it"

But good job on the repair

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Who is paying for this 30x scale-up? Its sounds expensive.
    • Millions of users to benefit from Windows 11's new performance boost on Adobe Photoshop by Sayan Sen Despite the advent of AI-generated imagery, Adobe's Photoshop remains one of the most popular tools on this planet. Adobe does not have a publicly reported total user count but it's probably not wrong to assume there are millions. As of 2025, Adobe Creative Cloud has had approximately 41 million paid subscribers, many of whom likely use Photoshop. In addition, more than 166,000 companies worldwide are apparently also using the app. These figures are according to a very recent report by SQ Magazine. Out of them, it is fair to assume that many are probably running Windows. As such, there is good news for these users as Microsoft has announced Photoshop is getting a big 20% performance boost on x86-64 (AMD64) systems and a 13% bump-up on Arm devices. This is definitely great news for them as many have complained about the slow performance and general sluggishness of Photoshop on Windows 11 ever since the advent of the latter back in 2021. If you are wondering how Microsoft managed to do this, the answer lies in a combination of compiler-level optimizations and a technology called Sample Profile Guided Optimization (SPGO). According to Microsoft, Adobe worked closely with the company’s Visual C++ team and adopted the latest MSVC toolchain enhancements together with SPGO to squeeze more performance out of Photoshop’s CPU-bound workloads. Unlike traditional Profile Guided Optimization (PGO), which requires developers to create special instrumented builds and run lengthy training workloads, SPGO gathers performance data directly from optimized release binaries. This means Adobe could collect real-world usage information which gives a major advantage to this technique, as companies could leverage data collected from actual customer workloads rather than only relying on synthetic benchmark runs. In theory, this should allow optimizations to better reflect how users interact with software in the real world. Thanks to this, there are improvements to code layout, function inlining, hot-and-cold code separation, and other low-level tweaks that help processors execute instructions more efficiently. Essentially the compiler is better able to identify “hot” code paths, those which are most frequently executed, and optimize them accordingly.
    • "The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months¨ I'd prefer to see the lowest price in over a year
    • Glad these prices are starting to come down, but that is still crazy. I bought the 2TB 9100 Pro (slightly more expensive version with PCIe 5.0) last year for $240.
    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months by Sayan Sen Yesterday, we covered a really good deal wherein you can get a 4TB TeamGroup T-FORCE G50 NVMe PCIe Gen4 SSD for a low price of just $400 with a special discount coupon. That's just $100 per TB, making it a very good offer during these hard times. The deal is still live, so you can check it out in its dedicated article here if you do not want to miss out. Meanwhile, if you don't have that kind of budget but still wish to buy an SSD for a good price, the 2TB variant of the TeamGroup SSD at $280 its lowest price in over three months. Meanwhile, those seeking 2TB but faster performance can check out Samsung's 990 PRO, which has hit the lowest price also in the last quarter or so, as it's on sale for $370 (purchase links under the specs table down below). Thus, you want a faster drive, get the 990 Pro, or you want more capacity, grab the TeamGroup 4TB linked in the first para. The 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification TeamGroup T-FORCE G50 2TB Samsung 990 PRO 2TB Interface PCIe 4.0 x4, NVMe 1.4 PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 M.2 2280 Controller InnoGrit Controller Samsung In-house Controller NAND Flash 3D TLC 3D TLC DRAM Cache None (HMB supported) 2GB LPDDR4 Sequential Read (Max) 5,000 MB/s 7,450 MB/s Sequential Write (Max) 4,500 MB/s 6,900 MB/s Random Read (4K) Up to 600,000 IOPS Up to 1,400,000 IOPS Random Write (4K) Up to 700,000 IOPS Up to 1,550,000 IOPS TBW (Endurance) 1,300 TBW 1,200 TBW MTBF 3,000,000 hours 1,500,000 hours Operating Temperature 0°C to 70°C 0°C to 70°C Storage Temperature -40°C to 85°C -40°C to 85°C Shock Resistance 1,500G / 0.5ms 1,500G / 0.5ms Heatsink Patented Graphene Heat Spreader No Get them at the links below: Samsung 990 PRO SSD 2TB (MZ-V9P2T0B/AM): $369.99 (Sold and Shipped by Amazon US) TEAMGROUP T-Force G50 2TB SSD (TM8FFE002T0C129): $279.99 (Sold by TeamGroup, Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!