How to prevent Windows 10 from Automatically installing.


Recommended Posts

Microsoft has just moved Windows 10 from being an optional update to being a recommended  one.  

 

On a Windows 7 and Windows 8 System, the Windows 10 setup will start automatically. But you will be asked to confirm the setup process before Windows 10 actually installs.

 

If you DO NOT want the install to take place, there is a work-around. 

 

Because the setup of Windows 10 has to be confirmed, I would recommend that when you start to see the setup process, cancel it. Next you should be able to go into Windows Update and hide the Windows 10 recommended update. Of course, it is always possible that  Microsoft might someday  “unhide” your hiding of  the update..

To hide the update, follow the instructions below.  

 

Windows 7.   

 

1) Click Start (bottom left)
2) In the Search box, type in Windows Update 

3) At the top of the search box Left click "Windows Update"
4) At the top click “Import update is available”
5) Uncheck the recommended Window 10 upgrade and then right click it and select “Hide update”
6) Press OK

 

Windows 8.1
If not already on the desktop, left click the desktop tile on the start screen.

 

1) Right Click the Start button (bottom left) and left click on "Control Panel"
2) On the top right of the control panel where it says "view by",drop it down and make sure it says "Large icons"
3) At the very bottom of the control panel left click "Windows Update" .

4) At the top, click “Import update is available”
5) Uncheck the recommended Window 10 upgrade and then right click it and select “Hide update”
6) Press OK.

 

4 hours ago, warwagon said:

Microsoft has just moved Windows 10 from being an optional update to being a recommended one.

 

This means that on a Windows 7 and Windows 8.1 system, Windows 10 will be automatically installed with no user interaction. Go to bed with Windows 7, wake up with Windows 10.

 

On Windows 7 and Windows 8.1 here is fix which should prevent it from happening.

 

24759323676_9b111c966f_c.jpg

 

 

Windows 7.

 

1) Click Start (bottom left)

2) in the Search box type in Windows Update

3) Left Click Windows Update in the search results above

4) On the left hand side of Windows Update select "Change settings"

5) Uncheck "Give me recommended updates the same way I receive important ones"

6) Press ok

 

Windows 8.1

If not already on the desktop, left click the desktop tile on the start screen

 

1) Right Click the Start button (bottom left) and left click on "Control Panel"

2) On the top right of the control panel were it says "view by" drop it down and make sure it says "Large icons"

3) At the very bottom of the control panel left click "Windows Update"

4) On the left hand side of Windows update select "Change settings"

5) Uncheck "Give me recommended updates the same way I receive important ones"

4) Press ok

 

Automatically install and automatically download and launch installer are two different things. Windows 10 is not an unattended install which means user input is required to actually install and it is not automatic as you said. 

 

MS said as much themselves that user interaction is required to install. 

REG ADD "HKLM\SOFTWARE\Policies\Microsoft\Windows\Gwx" /v DisableGWX /d 1 /f
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate" /v DisableOSUpgrade /d 1 /f
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade" /v AllowOSUpgrade /d 0 /f
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade" /v ReservationsAllowed /d 0 /f
TASKKILL /IM GWX.exe /T /F

10 hours ago, Aheer.R.S. said:

Step 1, go to http://ultimateoutsider.com/downloads/

Step 2, install GWX control Panel

Step 3, (Optional) Remove all windows 10 files from computer

 

Done :p 

Does GWX Control Panel have an automatic update build in?

On 2/3/2016 at 10:15 AM, adrynalyne said:

Automatically install and automatically download and launch installer are two different things. Windows 10 is not an unattended install which means user input is required to actually install and it is not automatic as you said. 

 

MS said as much themselves that user interaction is required to install. 

Do they require user interaction before automatically downloading 6 GB of useless junk  installation files?

" On a Windows 7 and Windows 8 System, Windows 10 will be automatically installed. But you will asked to confirm the setup process before Windows 10 actually installs. "

 

What does that even mean, you first say it will be automatically installed, but then your very next sentence is you will be asked to confirm the setup process before it actually installs. So which is it?

  • Like 2
59 minutes ago, warwagon said:

Does GWX Control Panel have an automatic update build in?

So far as I can tell, it has only blocked, and removed files associated with win 10, as for anything else windows update related, I cannot say for sure, but windows does update, even with gwx control panel running.

6 minutes ago, Aheer.R.S. said:

So far as I can tell, it has only blocked, and removed files associated with win 10, as for anything else windows update related, I cannot say for sure, but windows does update, even with gwx control panel running.

No I mean does GWX control panel automatically update itself when a new version is released?

 

If your concern is about the privacy settings/issues within Windows 10, then I suggest you look at this video to know how to de-cruft your installation

 

 

 

and the app he uses in the video, has no adware or other junk: Spybot beacon

 

But after using 90% of his video tactics, I noticed a measurable performance boost, probably from the P2P service that allows others to use my bandwidth on the net to download update data from my system. I also deleted those services that we really don't need. I even shutdown cortana. I can still use the search functionality but, I want my privacy. 

22 minutes ago, warwagon said:

No I mean does GWX control panel automatically update itself when a new version is released?

 

Oh, don't know, sorry, but I'm still on 7 so the 'first steps' towards updating to 10 as they were, are blocked.

There sure is a massive push to put people on 10. a couple weeks ago or within that 2 week period, there was a report here that, stated MSFT will stop hardware support for Windows 7 and 8. Does this include 8.1? probably.

 

So best we can do is  use spybot beacon and delete services in the video above to close up the privacy leaks.

GWX Control Panel publishes updates for fixes or when the Windows 10 upgrade notice procedures have changed. The updates are not automatic, one must download the newest release if procedures have changed. It basically saves one from having to manually enter reg changes. The panel is customizable and one can revert changes when ready to install Windows 10. I have used it on Win 7 and Win 8.* with no issues, the program is handy when a machine is not ready or not capable to upgrade to Win 10.

 

Quote

GWX Control Panel really works, is safe and easy to use, and gives you the option to re-enable the icon and upgrade notifications if you're ever ready to move forward with Windows 10.


Why GWX Control Panel is better than other solutions:
Some methods are only temporary fixes. They make the app go away until you restart Windows, or maybe until you do another Windows Update, but they don't truly stop the Get Windows 10 app from bothering you- they just postpone it.


Some methods are unsafe (especially the ones that involve you disabling Windows Update).


Some methods have potential to result in unexpected or undesired behavior if you're not completely sure what you're doing or if you apply a change to the wrong files or folders.


And some just went way beyond what was truly necessary to keep the Get Windows 10 app from bothering you.


GWX Control Panel doesn't do anything special. It's just simple and safe, and it works.


GWX Control Panel is a standalone executable, doesn't require to be installed.


GWX Control Panel is digitally signed.

http://www.techspot.com/downloads/6756-.html

 

There are many reviews online so that one can make an informed choice, all I can say is that it has worked when I required it on  particular machines.

 

:)

1 hour ago, chrisj1968 said:

There sure is a massive push to put people on 10. a couple weeks ago or within that 2 week period, there was a report here that, stated MSFT will stop hardware support for Windows 7 and 8. Does this include 8.1? probably.

 

So best we can do is  use spybot beacon and delete services in the video above to close up the privacy leaks.

Chris, it's not my place to question you, but wasn't 7 supposed to be supported for another 6 years?

1 hour ago, chrisj1968 said:

There sure is a massive push to put people on 10. a couple weeks ago or within that 2 week period, there was a report here that, stated MSFT will stop hardware support for Windows 7 and 8. Does this include 8.1? probably.

 

So best we can do is  use spybot beacon and delete services in the video above to close up the privacy leaks.

Microsoft just doesn't want to support new technologie on platforms that where designed 10 and 7 years ago (7 and 8.x respectively). That doesn't mean that these OS's don't work anymore on Skylake and any future SoC, just that Microsoft isn't going to provide official support.

 

And for the privacy leaks, no need to "close" them, there isn't anything open.

5 minutes ago, Thomas the Tank Engine said:

 

 

 

More people should read the EULA heh. Ignorance is no excuse. Everyone who has read the EULA knows the OS talks to MS. 

 

 

1 hour ago, Aheer.R.S. said:

Chris, it's not my place to question you, but wasn't 7 supposed to be supported for another 6 years?

I was under that impression. But it seems that Microsoft is changing the game plan. Skylake and Later Will Be Withheld Windows 7 / 8.x Support this falls along the lines of Microsoft not supporting hardware changes. Sorry, it was from Jan 16th. Microsoft will not support older Windows versions on upcoming PC hardware  . This article took me pages of old news to find

 

What I'm taking from this is that, they are looking to push people on to 10. Aheer, I would agree with you about the length of support. But I'll stick with the neowin article since I trust Neowin and their news reporters. 

1 hour ago, adrynalyne said:

More people should read the EULA heh. Ignorance is no excuse. Everyone who has read the EULA knows the OS talks to MS. 

 

 

nothing wrong with installing the OS but locking the doors to your house so to speak.

1 hour ago, adrynalyne said:

More people should read the EULA heh. Ignorance is no excuse. Everyone who has read the EULA knows the OS talks to MS. 

I've had only 1 customer who read the Windows 10 EULA. Afterwards she didn't want to touch windows 10 with a 10 foot pole.

37 minutes ago, warwagon said:

I've had only 1 customer who read the Windows 10 EULA. Afterwards she didn't want to touch windows 10 with a 10 foot pole.

I can respect that a whole lot more than those who do not and come up with crazy claims they should have known about. 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      593
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!