Recommended Posts

Hi guys. I got a quick question for anyone that has more experience with openvpn. I'm trying to have the damn thing run at startup and I used the "scheduled task" method to do it. It runs fine, but my problem is that there's no tray icon. Without it, if something is wrong with the network connection, there's no way to reconnect the vpn, unless the user ends the task/process and open the gui manually. And that is another problem, because the logged in user does not have admin privileges. 

 

I've set a delay of 2 minutes in the Triggers section of the task, to let everything else load first, but the tray icon still doesn't show. 

 

Is there anything else I can do?

 

Thank you!

Link to comment
https://www.neowin.net/forum/topic/1288614-openvpn-gui-issue-at-startup/
Share on other sites

why not just put it in the startup folder instead of running it as a scheduled task?  This way when the user logs on it will run and it will be interactive with the user.   You can even do it in the all users section so that it applies to anyone who logs in, not just the individual user.

  On 11/02/2016 at 21:32, sc302 said:

why not just put it in the startup folder instead of running it as a scheduled task?  This way when the user logs on it will run and it will be interactive with the user.   You can even do it in the all users section so that it applies to anyone who logs in, not just the individual user.

Expand  

I already tried that, it does run BUT it asks for the admin password and I don't want that, since the user doesn't have the rights.

  On 11/02/2016 at 22:27, BudMan said:

do your users have admin rights?? 

 

If not is this the way you set it up?

https://community.openvpn.net/openvpn/wiki/Nonprivileged

 

This starts the gui for the user..

Expand  

As I said, the user doesn't have admin rights. I used the method here: https://help.my-private-network.co.uk/support/solutions/articles/8464-windows-openvpn-auto-start

  On 11/02/2016 at 21:20, John Teacake said:

Why are you trying to run it as a Scheduled Task? Presumably there would be no icon as its not running as the logged in user. 

Expand  

Because there's no other way other than the openvpn windows service set to automatic, but that method still doesn't show the tray icon...

That method is missing quite a bit... Take a look at the article I posted..

 

Also you can give the vpn service start stop permissions to normal user...  Been a coons age since I have done anything like this but I know you can grant non users rights to start and stop service with
 subinacl, there use to be a way to change the gui via a reg key so that it started and stopped the service..

 

Google is your friend, found the old article

http://openvpn.se/files/howto/openvpn-howto_run_openvpn_as_nonadmin.html

 

That goes over the way to change the service and the reg keys... Have not had to do this in years.. But might still work, if I get a chance latter I will test it..  Also int he article I linked to it links to 2 other gui options that can be used without admin rights.  Maybe either of those would suit your needs??  So you don't have to use the scheduled task method at all.

  On 11/02/2016 at 22:50, BudMan said:

That method is missing quite a bit... Take a look at the article I posted..

 

Also you can give the vpn service start stop permissions to normal user...  Been a coons age since I have done anything like this but I know you can grant non users rights to start and stop service with
 subinacl, there use to be a way to change the gui via a reg key so that it started and stopped the service..

 

Google is your friend, found the old article

http://openvpn.se/files/howto/openvpn-howto_run_openvpn_as_nonadmin.html

 

That goes over the way to change the service and the reg keys... Have not had to do this in years.. But might still work, if I get a chance latter I will test it..  Also int he article I linked to it links to 2 other gui options that can be used without admin rights.  Maybe either of those would suit your needs??  So you don't have to use the scheduled task method at all.

Expand  

I think you're missing the point (but please correct me if I'm wrong). The issue is NOT that a normal user cannot run openvpn, it's the tray icon that's missing. The connection runs fine as a scheduled task, with admin rights (the .exe is in the processes list in task manager), but my concern is that if the internet connection drops the vpn will not reconnect automatically. So the user needs to have a manual way of reconnecting, via the tray icon, since re-opening the main exe file requires admin password.

 

That script + scheduled task method you posted basically does the same thing, the app runs but there's no icon. Maybe I should add an explorer restart, so that the tray icon gets registered properly?

If you read the article I Linked too it gives them the gui so they can restart the connection.  Or the other guis in the article do not have to have admin rights and they can restart the connection.  They have a GUI!!

 

That is your whole point right - if the connection dies the users can't restart it... That is what I am showing you how to do - the article gives you the gui to see if the connection is up down, restart it, etc..  Same goes with the replacement guis that do not require admin.

 

"the app runs but there's no icon"

There is a icon!!! 

 

This automatically created task will put the user in the group "Network Configuration Operators" and then start OpenVPN GUI automatically at the next logon of this (non privileged) user (with highest privileges).

 

"win7x64_user1_openvpn will then execute openvpn-gui.exe in the users context but with highest privileges."

 

Since the user task win7x64_user1_openvpn was present at logon, it get's executed and starts openvpn-gui.exe. So after the user logged in, he/she has the OpenVPN-GUI running in the system tray and is ready to establish connections without administrative privileges"

 

Clearly you did NOT read it???

 

 

  On 11/02/2016 at 22:31, TDT said:

I already tried that, it does run BUT it asks for the admin password and I don't want that, since the user doesn't have the rights.

Expand  

then use proc mon to find out what is being called and give the user admin rights over those areas either in the registry or the file location.  If the file location is in program files move the folder or install it to the root of c or a folder outside of one of the restricted folders (windows, program files, or programdata).  This is how I have made programs that normally need admin access accessible to end users without admin access.  I could remote in with teamviewer and help you with a test box if you would like me to show you what to do...I will probably need a break at some point today while watching airwatch videos (blech). 

 

https://technet.microsoft.com/en-us/sysinternals/processmonitor.aspx

 

  On 12/02/2016 at 09:47, BudMan said:

If you read the article I Linked too it gives them the gui so they can restart the connection.  Or the other guis in the article do not have to have admin rights and they can restart the connection.  They have a GUI!!

 

That is your whole point right - if the connection dies the users can't restart it... That is what I am showing you how to do - the article gives you the gui to see if the connection is up down, restart it, etc..  Same goes with the replacement guis that do not require admin.

 

"the app runs but there's no icon"

There is a icon!!! 

 

This automatically created task will put the user in the group "Network Configuration Operators" and then start OpenVPN GUI automatically at the next logon of this (non privileged) user (with highest privileges).

 

"win7x64_user1_openvpn will then execute openvpn-gui.exe in the users context but with highest privileges."

 

Since the user task win7x64_user1_openvpn was present at logon, it get's executed and starts openvpn-gui.exe. So after the user logged in, he/she has the OpenVPN-GUI running in the system tray and is ready to establish connections without administrative privileges"

 

Clearly you did NOT read it???

 

 

Expand  

I did read it and tried, but it didn't work then, I think I missed a step or something. I tried again today and it does indeed work as expected, but there's still a minor issue (I really don't care about it, just mentioning): the tray icon is always green, even if the vpn gets disconnected. 

Anyway, thanks! This is a much better solution than the others that I found so far. :)

  • 5 months later...
  On 12/02/2016 at 09:47, BudMan said:

If you read the article I Linked too it gives them the gui so they can restart the connection.  Or the other guis in the article do not have to have admin rights and they can restart the connection.  They have a GUI!!

 

That is your whole point right - if the connection dies the users can't restart it... That is what I am showing you how to do - the article gives you the gui to see if the connection is up down, restart it, etc..  Same goes with the replacement guis that do not require admin.

 

"the app runs but there's no icon"

There is a icon!!! 

 

This automatically created task will put the user in the group "Network Configuration Operators" and then start OpenVPN GUI automatically at the next logon of this (non privileged) user (with highest privileges).

 

"win7x64_user1_openvpn will then execute openvpn-gui.exe in the users context but with highest privileges."

 

Since the user task win7x64_user1_openvpn was present at logon, it get's executed and starts openvpn-gui.exe. So after the user logged in, he/she has the OpenVPN-GUI running in the system tray and is ready to establish connections without administrative privileges"

 

Clearly you did NOT read it???

 

 

Expand  

thanks for the tip this might be just what im looking for, one question, in the article it mentions accessing a "hidden" menu. I fixed the value in the registry but I don’t know where to look for it, nothing has SEEMED to change. If you have any advice it would be much appreciated

 

- I'm running Windows 10 and am also having trouble with the system tray icon showing up

  On 20/07/2016 at 11:21, BudMan said:

I have not tested this with windows 10. 

Expand  

Thanks for fast reply. I have Win 7 computers as well and i wanted to see this. I changed the value but I am unsure where the extra menu pops up. i.e. do I right click the GUI or maybe the system tray icon? Thanks.

 

"If you are running as administrator, and just want a convenient way to control the OpenVPN Service, you can enable a hidden menu for this."

 

You enable this by setting the following registry value to "1":  HKEY_LOCAL_MACHINE\SOFTWARE\OpenVPN-GUI\allow_service

 

I changed the value but I am unsure where the extra menu pops up. i.e. do I right click the GUI or maybe the system tray icon? Thanks.

 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I am linking it for anyone that runs Windows 11 that isn't specifically you that is following our conversation, since it is likely that others have the problem. As you can see, it isn't the slightest bit pointless at all.
    • Firefox 139.0.4 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~60.0 MB (Freeware) Download: Firefox 139.0.4 for Linux | 64-bit | ~90.0 MB Download: Firefox for MacOS | 127.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Joplin 3.3.13 by Razvan Serea Joplin is a free, open source note taking and to-do application, which can handle a large number of notes organised into notebooks. The notes are searchable, can be copied, tagged and modified either from the applications directly or from your own text editor. Notes exported from Evernote can be imported into Joplin, including the formatted content (which is converted to Markdown), resources (images, attachments, etc.) and complete metadata (geolocation, updated time, created time, etc.). Plain Markdown files can also be imported. The notes can be securely synchronised using end-to-end encryption with various cloud services including Nextcloud, Dropbox, OneDrive and Joplin Cloud. Full text search is available on all platforms to quickly find the information you need. The app can be customised using plugins and themes, and you can also easily create your own. The application is available for Windows, Linux, macOS, Android and iOS. A Web Clipper, to save web pages and screenshots from your browser, is also available for Firefox and Chrome. Features Web Clipper for Firefox and Chrome. End To End Encryption (E2EE). Note history (revisions). Synchronisation with various services, including Nextcloud, Dropbox, WebDAV and OneDrive. Offline first, so the entire data is always available on the device even without an internet connection. Import Enex files (Evernote export format) and Markdown files. Export JEX files (Joplin Export format) and raw files. Support notes, to-dos, tags and notebooks. Sort notes by multiple criteria - title, updated time, etc. Support for alarms (notifications) in mobile and desktop applications. Markdown notes, which are rendered with images and formatting in the desktop and mobile applications. Support for extra features such as math notation and checkboxes. Choice of both Markdown and Rich Text (WYSIWYG) editors. File attachment support - images are displayed, other files are linked and can be opened in the relevant application. Inline display of PDF, video and audio files. Goto Anything feature. Search functionality. Geo-location support. Supports multiple languages. External editor support - open notes in your favorite external editor with one click in Joplin. Extensible functionality through plugin and data APIs. Custom CSS support for customisation of both the rendered markdown and overall user interface. Customisable layout allows toggling, movement and sizing of various elements. Keyboard shortcuts are editable and allow binding of most Joplin commands with export/import functionality. Joplin 3.3.13 changelog: Fixed: Fix printing (#12244) (#12240 by @personalizedrefrigerator) Download: Joplin 3.3.13 | Joplin Portable | ~300 MB (Open Source) Download: MacOS | Android | Linux | iOS View: Joplin Home Page | GitHub project page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple: lets take our inspiration from Windows 7/Vista and call it innovative
    • Nice! My $100 refurbished iPad 8 that I bought last year for a small project (and still runs like new cuz it's been mostly in storage the past several months) will get this v26 upgrade. I'm definitely gonna scope out OS26 on this device before upgrading my also-supported refurbished iPhone SE 3rd Gen (only got it for the 5G UW support).
  • Recent Achievements

    • Dedicated
      MadMung0 earned a badge
      Dedicated
    • Rookie
      CHUNWEI went up a rank
      Rookie
    • Enthusiast
      the420kid went up a rank
      Enthusiast
    • Conversation Starter
      NeoToad777 earned a badge
      Conversation Starter
    • Week One Done
      VicByrd earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      267
    3. 3
      +FloatingFatMan
      257
    4. 4
      Edouard
      203
    5. 5
      snowy owl
      178
  • Tell a friend

    Love Neowin? Tell a friend!