Asus H61M-K motherboard for casual gaming...


Recommended Posts

I'm looking to replace the motherboard in my computer (currently Asus P8P67) for this one (reason is because I want to put the PC into an mATX case, but the board I have now is an ATX form factor):

http://www.amazon.co.uk/H61M-K-Motherboard-Socket-Micro-Intel/dp/B00F0WY7AM/ref=sr_1_1?ie=UTF8&qid=1455461216&sr=8-1&keywords=asus+socket+1155+matx

 

Will this board suffice for the following:

Corsair Carbide Air 240 Case

Intel Core i7-2600K

8GB (2x 4GB) Corsair Vengeance DDR3 RAM

GeForce GTX 580

Corsair Hydro H50 CPU Water cooler

1x Samsung EVO 850 SSD

2x 1TB WD 7,200RPM HDDs

1x 2TB WD 7,200RPM HDDs

 

The main difference I think is the chipset. The board I have now is the P67 chipset, but the board I linked is a H61 chipset. I'm not a competitive gamer and I don't get to play as much as I used to. I also don't plan on performing any overclocking, or using advanced features. I just want the gear I have, with this motherboard and case and to be able to play games as I do now.

 

Will this board do what I need?

Edited by Daedroth

It will work.  However, you'll lose your SATA 6Gb/s ports and USB 3.0 ports with the H61.  The SATA might not be a big deal ... but your front USB ports on the case will not be connected (though you could install a 3.0 add on PCIx card)  Something like this (please note I've never used this product)

@jjkusafThanks for the reply.

Using the Samsung EVO 850 SSD...will that suffer from being connected at a slower SATA connection?

As for USB...I don't utilise USB 3.0 at the moment, and to be honest, USB transfers are few and far between for me anyway.

Sorry, in your original post you said Evo 250...which I never heard of but figured it may have been an older Samsung drive.

 

Yes, the 850 will max out the SATA port on the board you're looking at.  The 850 pushes around ~540MB/sec where SATA II only does 300ish.

 

Now, if you'll notice that drop in speed ... I dunno...maybe.   /shrug

 

As with the USB 3.0, you could install an add-on card that gives you SATAIII ... especially if you notice that drop in speed.

5 minutes ago, Daedroth said:

The Intel 2600K is not specifically listed in the list of supported CPUs, so now I'm not too sure on what to do! https://www.asus.com/uk/Motherboards/H61MK/HelpDesk_CPU/

ahhh...how embarrassing.  Good catch.  The TDP rating of the 2600k is too high for that mobo (95w) ... which is why only lower TDP rated processors are listed.  

 

Sorry, I made a rookie mistake and just glanced "3rd/2nd generation Core i7/i5/i3/Pentium processors in the LGA1155 package " without looking at the compatibility list.  

 

:(

 

Maybe this one?  http://www.amazon.co.uk/MSI-LGA1155-u-ATX-Motherboard-Intel/dp/B009US9DCO/ref=sr_1_1?ie=UTF8&qid=1455465423&sr=8-1&keywords=MSI+H61M-P31

As with the ASUS you listed earlier ... you'll lose the SATAIII and USB 3.0 ... but you'll only have one PCIx1 (for one addon card...like a USB 3.0 add on or SATAIII add on).  Your CPU is listed though https://us.msi.com/product/motherboard/support/H61M-P31W8.html#support-cpu

 

You can also browse this PCPartpicker link which will list which motherboards are compatabile with the 2600K.  It is a bit hard now since it is a bit old and most motherboards for that "era" are discontinued. :(

https://pcpartpicker.com/parts/motherboard/?compatible_with=intel-cpu-bx80623i72600k

On 2/14/2016 at 11:05 AM, jjkusaf said:

Maybe this one?  http://www.amazon.co.uk/MSI-LGA1155-u-ATX-Motherboard-Intel/dp/B009US9DCO/ref=sr_1_1?ie=UTF8&qid=1455465423&sr=8-1&keywords=MSI+H61M-P31

As with the ASUS you listed earlier ... you'll lose the SATAIII and USB 3.0 ... but you'll only have one PCIx1 (for one addon card...like a USB 3.0 add on or SATAIII add on).  Your CPU is listed though https://us.msi.com/product/motherboard/support/H61M-P31W8.html#support-cpu

 

You can also browse this PCPartpicker link which will list which motherboards are compatabile with the 2600K.  It is a bit hard now since it is a bit old and most motherboards for that "era" are discontinued. :(

https://pcpartpicker.com/parts/motherboard/?compatible_with=intel-cpu-bx80623i72600k

That is a flaw with mATX (as a whole) - too few PCIe x1 slots (usually one).

 

I went mATX myself (MSI H81-E33) and while I didn't lose any SATA ports (I have four - two each of SATA 6.0gB and SATA 3.0gB), that single PCIe x1 slot was a possible problem (the Recon3D Fata1ity Professional also has an Intel HD Audio mode which is supported by OSes that are not Windows - such as Linux), most onboard-audio chipsets have their issues outside of Windows, if not IN Windows.  I lucked out that the onboard audio DOES work outside of Windows (and in Linux distributions in particular) - so the Fata1ity is back on the shelf.

6 minutes ago, BinaryData said:

Whats nice about the Samsung SSDs is the ability to nearly double speeds with their drive boosting technology.

 

I'm not a particular fan about ASUS, why are you specifically picking them, if you don't mind me asking?

Talking about RAPID mode?  Yea, I guess...especially on benchmarks.  In real world performance I honestly cannot tell the difference.  My Samsung feels just as snappy with RAPID off as it does with it on.

 

Better question is what do you have against ASUS?  They are one of the top 3 motherboard manufactures out there.  I personally do not have a problem (or an allegiance to a particular brand...look at my sig block) with any motherboard manufacture.  

20 minutes ago, BinaryData said:

Whats nice about the Samsung SSDs is the ability to nearly double speeds with their drive boosting technology.

 

I'm not a particular fan about ASUS, why are you specifically picking them, if you don't mind me asking?

Asus has really made a name for themselves, they've become the Mercedes Benz in the hardware world, and sometimes overpricing their products because of the name. I do like their products, I have a few, however, I also find Gigabyte, MSI, and AsRock, to be just as good, while being more competitive in pricing.

11 minutes ago, jjkusaf said:

Talking about RAPID mode?  Yea, I guess...especially on benchmarks.  In real world performance I honestly cannot tell the difference.  My Samsung feels just as snappy with RAPID off as it does with it on.

 

Better question is what do you have against ASUS?  They are one of the top 3 motherboard manufactures out there.  I personally do not have a problem (or an allegiance to a particular brand...look at my sig block) with any motherboard manufacture.  

 

1 minute ago, JHBrown said:

Asus has really made a name for themselves, they've become the Mercedes Benz in the hardware world, and sometimes overpricing their products because of the name. I do like their products, I have a few, however, I also find Gigabyte, MSI, and AsRock, to be just as good, while being more competitive in pricing.

I've owned several ASUS products, none of them have made it past a year of use, except my DVD Drive, and I use that maybe ONCE a year?

 

I've owned several of their motherboards, two were LGA775 boards, the other was an 1150. The first two ASUS boards were their ROG brand. Both boards, after about 6 months started having temperature regulation issues, about the 9 month mark my PC would start to over heat. At the 1 year, the boards were fried, the second I hit the power button, it'd freak out. I swapped it out for a Gigabyte board, it's been around 3 years, and still running strong. I've refreshed the paste every year. The third board was recent. Dead SATAIII ports, drives not showing up at all, my favorite one is the BIOS problem. Would lock up trying to change BIOS settings, at one point I got locked out completely.

 

Like I've said previously, I've had massive headaches with ASUS. You say they're the beamers of the PC world, but I look at them like a Datsun. Which is a reject wannabe truck. The same goes for Intel/AMD, I've always liked AMD but both times I owned an AMD Processor, it's been fried. Intel has been the winning chip for me, little more expensive, but they work. Same with NVidia vs ATI. I always buy EVGA NVidia cards. Hell, I hate my 9800GTX+ for ages, when the 500s came out, tht's when I upgraded. That's how awesome it was. I don't do any sort of over clocking, I do leave my PCs online nearly 24/7, once or twice a week I reboot them. I clean their fans and replace them every 2 years. I keep the cases clean and free of dust. I take everything out at least once a year and use an air compressor to blow the dust out. Yes I hold the fan blade so it doesn't move, I'm not an idgit. :p

2 minutes ago, BinaryData said:

 

I've owned several ASUS products, none of them have made it past a year of use, except my DVD Drive, and I use that maybe ONCE a year?

 

I've owned several of their motherboards, two were LGA775 boards, the other was an 1150. The first two ASUS boards were their ROG brand. Both boards, after about 6 months started having temperature regulation issues, about the 9 month mark my PC would start to over heat. At the 1 year, the boards were fried, the second I hit the power button, it'd freak out. I swapped it out for a Gigabyte board, it's been around 3 years, and still running strong. I've refreshed the paste every year. The third board was recent. Dead SATAIII ports, drives not showing up at all, my favorite one is the BIOS problem. Would lock up trying to change BIOS settings, at one point I got locked out completely.

 

Like I've said previously, I've had massive headaches with ASUS. You say they're the beamers of the PC world, but I look at them like a Datsun. Which is a reject wannabe truck. The same goes for Intel/AMD, I've always liked AMD but both times I owned an AMD Processor, it's been fried. Intel has been the winning chip for me, little more expensive, but they work. Same with NVidia vs ATI. I always buy EVGA NVidia cards. Hell, I hate my 9800GTX+ for ages, when the 500s came out, tht's when I upgraded. That's how awesome it was. I don't do any sort of over clocking, I do leave my PCs online nearly 24/7, once or twice a week I reboot them. I clean their fans and replace them every 2 years. I keep the cases clean and free of dust. I take everything out at least once a year and use an air compressor to blow the dust out. Yes I hold the fan blade so it doesn't move, I'm not an idgit. :p

Good stuff. However, my reference to the Mercedes Benz was more about, there are other brands that offer the same performance, similar features, without the Asus badge and Asus price that comes along with it.

4 minutes ago, BinaryData said:

 

I've owned several ASUS products, none of them have made it past a year of use, except my DVD Drive, and I use that maybe ONCE a year?

 

I've owned several of their motherboards, two were LGA775 boards, the other was an 1150. The first two ASUS boards were their ROG brand. Both boards, after about 6 months started having temperature regulation issues, about the 9 month mark my PC would start to over heat. At the 1 year, the boards were fried, the second I hit the power button, it'd freak out. I swapped it out for a Gigabyte board, it's been around 3 years, and still running strong. I've refreshed the paste every year. The third board was recent. Dead SATAIII ports, drives not showing up at all, my favorite one is the BIOS problem. Would lock up trying to change BIOS settings, at one point I got locked out completely.

 

Like I've said previously, I've had massive headaches with ASUS. You say they're the beamers of the PC world, but I look at them like a Datsun. Which is a reject wannabe truck. The same goes for Intel/AMD, I've always liked AMD but both times I owned an AMD Processor, it's been fried. Intel has been the winning chip for me, little more expensive, but they work. Same with NVidia vs ATI. I always buy EVGA NVidia cards. Hell, I hate my 9800GTX+ for ages, when the 500s came out, tht's when I upgraded. That's how awesome it was. I don't do any sort of over clocking, I do leave my PCs online nearly 24/7, once or twice a week I reboot them. I clean their fans and replace them every 2 years. I keep the cases clean and free of dust. I take everything out at least once a year and use an air compressor to blow the dust out. Yes I hold the fan blade so it doesn't move, I'm not an idgit. :p

ahh ok.  On the flipside I've never had a motherboard fail...except for an Abit but that was because the PSU failed taking the mobo with it.  I've had no issues with the motherboards I've owned ... ASUS, ASrock, MSI and Gigabyte (and I think I owned an AOpen at one time).  

 

Though I will normally stick with ASUS for my main system.  I gave my old ASUS Rampage Formula II w/ a Xeon 3110 to a friend and it is still going strong.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ah. La Fontana De Incontinentia ! Bella ! Bella !
    • Hi everyone, I'm planning a small network upgrade and was wondering how others prepare their networks for future needs. Do you usually invest in higher-speed switches and better cabling from the start, or do you upgrade only when necessary? I'd be interested in hearing what has worked well for you and any lessons you've learned over time. Thanks!
    • Greetings and welcome!!
  • Recent Achievements

    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
    • Apprentice
      Asgardi went up a rank
      Apprentice
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      93
    5. 5
      macoman
      67
  • Tell a friend

    Love Neowin? Tell a friend!