RAMDISK - How large to use it as boot


Recommended Posts

I have a problem.  When I get bored with my computer - I want to change it.

I just built this monster in December.  My boot drive is the 500GB Samsung 950 Pro

I want to know how large of a RAMDISK do I need to put WIndows 10 on it.

I dont know if you have to config for pagefiles and such , how large a plain jane win 10 image takes, etc.

I really just want to see if it makes a difference, therefore is it worth it.

It may not (probably not) be a permanent situation.  I am planning on backing up everything, doing it, then... probably going back to the way it was - I just dont know how much RAM and what prog to use to do it.

My mobo has RAMDISK built in - but only allows for 4GB, so I would have to use a paid solution - but they're cheap - so that isnt an issue.


Thanks


(I get like this when there isnt a game out that I want to play, or if the hardware in the computer doesnt make me all warm and fuzzy anymore)   I do things like this to keep from constantly throwing money at a money pit.

 

Link to comment
https://www.neowin.net/forum/topic/1295038-ramdisk-how-large-to-use-it-as-boot/
Share on other sites

you can't put your OS on RamDisk.

its because, RamdDisk is software not OS layer, it works on top of OS.

But even if you succeed by some tweaks to Install OS on RamDisk, it still required caching on Disk, otherwise everything get lost when PC turn off.

IMO, not a worthy try.

11 minutes ago, Xahid said:

you can't put your OS on RamDisk.

its because, RamdDisk is software not OS layer, it works on top of OS.

But even if you succeed by some tweaks to Install OS on RamDisk, it still required caching on Disk, otherwise everything get lost when PC turn off.

IMO, not a worthy try.

Yeah - did some looking - not gonna happen.  Too much tweaking

Thanks

(Y)

 

You didn't mention how much RAM you have but if you have a lot, Windows is already doing it for you behind the scenes.

 

The Samsung 950 Pro is insane fast so beating that becomes a non-trivial task.

 

Windows 10 will use an agressive percentage of RAM to cache stuff which makes a RAM disk to have questionable value.

 

Everything will take a certain amount of time even if you had infinite speed I/O and nothing obvious comes to mind in this situation. I suspect that two Samsung 950 Pros in RAID-0 will yield minimal real world gains. To get an order of magnitude past that would need battery backed RAM hardware emulating a M.2

 

Another option might be a hardware based controller like LSI feeding a large SATA SSD Array.

 

A giant water cooler to double your CPU speed might be the only option left to get a thrill ride...

 

  • Like 2

the only thing that I consider proper use of RAMDISK boot is when it was used by BOOT from LAN terminal.

On (re-)boot the terminal will fetch OS partition from server using the LAN and put that on firmwired RAM disk.

Its actually ideal for public terminal and its also cut some initial cost that usually associated with internal HDD/SSD storages.

But i heard something like that before current secureboot thingy, is such thing even compliant with secureboot scheme?

If your looking for a rush, I would recommend trying out PCIe based SSDs.  You can pick up a Samsung PCIe SSD and get 1600MB/1350MB (1.6GB/1.35GB or 12,800Mb/10,800Mb) Read/Write  with PCI Express 2 and 2150MB/1550MB (2.15GB/1.55GB or 17200Mb/12400Mb) Read/Write with PCI Express 3 with just one, if you add more...

Good ol' RAMDisk drives.  Remember seeing these a long time ago ... and thinking "wow" ... and then my jaw dropped when I saw the price.

 

 

hyperdrive-4.jpg

 

I think these were sold in the mid 2000's.  The DRAM would still be powered when the PC was turned off so not to lose any data.  Still severely limited by the interface though...with the primary advantage of practically having zero access/seek time.  It had various models ... I believe 8, 16 and 32GB.  The 8GB was ~$2500 and the 32GB costing ~$3800 ... without memory modules ... which back then was obviously more expensive.  I think you could get 32GB memory for around $4000'ish.  In other words ... buying the top of the line Hyperdrive 4 topped out with 32GB of memory would cost almost $8000.  You can now get a 32GB SSD, which has better performance for around 40 bucks.  Man...have times changed.

 

 

Gigabyte had a similar product...though it was PCI and only supported 4GB...but was "only" a couple hundred bucks without memory as well.

 

1712.jpg

 

Anyway...I haven't seen any products similar to these recently.  SSD's (especially the newer NVMe) have made them ... for the most part ... impractical.  

  • Like 2
6 hours ago, Ravensky said:

Get another 950 500Gb and RAID 0 them... so fast!!!

Only have 1 M.2 slot on mobo

 

1 hour ago, ITOps said:

If your looking for a rush, I would recommend trying out PCIe based SSDs.  You can pick up a Samsung PCIe SSD and get 1600MB/1350MB (1.6GB/1.35GB or 12,800Mb/10,800Mb) Read/Write  with PCI Express 2 and 2150MB/1550MB (2.15GB/1.55GB or 17200Mb/12400Mb) Read/Write with PCI Express 3 with just one, if you add more...

Right now - I dont see any faster than my 950 Pro in real world terms - unless you go for something extravagant and server-based.

3 hours ago, DevTech said:

You didn't mention how much RAM you have but if you have a lot, Windows is already doing it for you behind the scenes.

 

The Samsung 950 Pro is insane fast so beating that becomes a non-trivial task.

 

Windows 10 will use an agressive percentage of RAM to cache stuff which makes a RAM disk to have questionable value.

 

Everything will take a certain amount of time even if you had infinite speed I/O and nothing obvious comes to mind in this situation. I suspect that two Samsung 950 Pros in RAID-0 will yield minimal real world gains. To get an order of magnitude past that would need battery backed RAM hardware emulating a M.2

 

Another option might be a hardware based controller like LSI feeding a large SATA SSD Array.

 

A giant water cooler to double your CPU speed might be the only option left to get a thrill ride...

 

I am running two 950's and in RAID-0 and it is a LOT faster than one...

4 hours ago, Ravensky said:

I am running two 950's and in RAID-0 and it is a LOT faster than one...

Obviously it would benchmark faster, but I was very skeptical that day to day usage would be impacted much simply because a single 950 is so fast.

 

So what stuff do you find perceptually much different with two 950's over a single 950?

 

5 hours ago, T3X4S said:

Only have 1 M.2 slot on mobo

 

Right now - I dont see any faster than my 950 Pro in real world terms - unless you go for something extravagant and server-based.

Yeah, I scanned through the specs of all the PCIe cards on Newegg and couldn't see anything faster than a 950. In fact most of them were slower or similar.

 

I suppose if Ravensky can provide detail on his dual-950 experience, you could consider a dual PCIe card addition if slots available.

 

Unfortunately anything you could do is outside the "best bang for the buck" territory.

 

If you have a lot of RAM there are registry settings to muck with how Windows manages the RAM cache and also turn off paging file (which screws up bsod dumps) or move page file to that mobo 4 gig ram disk you mentioned.

 

Giant water radiator keeps coming back into my head...

5 hours ago, adrynalyne said:

Or get one PCIe SSD and be faster. 

Or not.

 

I so so so much would like to have a 950.

 

http://www.newegg.ca/Product/Product.aspx?Item=N82E16820147467

 

It is essentially a PCIe SSD in just a different form factor.

 

Max Sequential Read

Up to 2500 MBps

Max Sequential Write

Up to 1500 MBps

4KB Random Read

Up to 300,000 IOPS (4KB, QD32)
Up to 12,000 IOPS (4KB, QD1)

4KB Random Write

Up to 110,000 IOPS (4KB, QD32)
Up to 43,000 IOPS (4KB, QD1)

 

http://www.newegg.ca/Product/ProductList.aspx?Submit=Property&Subcategory=636&N=100011693%20600521290%20600038471%20600038466%20600038467%20600537559%20600038468&IsNodeId=1&IsPowerSearch=1cm_sp=CAT-SSD_3-_-VisNav-_-Add-In-Card

 

Nothing there seems faster

 

http://www.newegg.ca/Product/Product.aspx?Item=N82E16820228114

 

That one has PCIe x 8 but since the flash RAM is a bit slower is probably pointless.

 

Some sort of PCIe x 8 using enterprise SLC Flash RAM might be faster if such a thing exists...

 

1 hour ago, DevTech said:

Obviously it would benchmark faster, but I was very skeptical that day to day usage would be impacted much simply because a single 950 is so fast.

 

So what stuff do you find perceptually much different with two 950's over a single 950?

 

saving large files, game loading, boot times, all the heavy stuff is WAY faster...I also edit LARGE files in Photoshop and that kind of stuff, its night and day for that kind of application...

1 hour ago, DevTech said:

Or not.

 

I so so so much would like to have a 950.

 

http://www.newegg.ca/Product/Product.aspx?Item=N82E16820147467

 

It is essentially a PCIe SSD in just a different form factor.

 

Max Sequential Read

Up to 2500 MBps

Max Sequential Write

Up to 1500 MBps

4KB Random Read

Up to 300,000 IOPS (4KB, QD32)
Up to 12,000 IOPS (4KB, QD1)

4KB Random Write

Up to 110,000 IOPS (4KB, QD32)
Up to 43,000 IOPS (4KB, QD1)

 

http://www.newegg.ca/Product/ProductList.aspx?Submit=Property&Subcategory=636&N=100011693%20600521290%20600038471%20600038466%20600038467%20600537559%20600038468&IsNodeId=1&IsPowerSearch=1cm_sp=CAT-SSD_3-_-VisNav-_-Add-In-Card

 

Nothing there seems faster

 

http://www.newegg.ca/Product/Product.aspx?Item=N82E16820228114

 

That one has PCIe x 8 but since the flash RAM is a bit slower is probably pointless.

 

Some sort of PCIe x 8 using enterprise SLC Flash RAM might be faster if such a thing exists...

 

I keep forgetting the 950 Pro is PCIe. 

39 minutes ago, Ravensky said:

saving large files, game loading, boot times, all the heavy stuff is WAY faster...I also edit LARGE files in Photoshop and that kind of stuff, its night and day for that kind of application...

did you actualy do all of those things on a single 950 Pro? just want to confirm that for the record since that description you have written would also seem to be describing a single 950 pro compared to anything else.

 

So, you seem to be implying the followinf progression:

 

1. 10,000 rpm hard drive - nice improvement over any hard drive

 

2. Current gen SATA SSD such as Samsung 850 - giant improvement over 10,000 rpm hard drive

 

3. M.2 Samsung 950 Pro - giant improvement over Samsung 850

 

4. Two M.2 Samsung 950 Pro in RAID 0 - giant improvement over single Samsung 950 Pro

 

14 minutes ago, DevTech said:

did you actualy do all of those things on a single 950 Pro? just want to confirm that for the record since that description you have written would also seem to be describing a single 950 pro compared to anything else.

 

So, you seem to be implying the followinf progression:

 

1. 10,000 rpm hard drive - nice improvement over any hard drive

 

2. Current gen SATA SSD such as Samsung 850 - giant improvement over 10,000 rpm hard drive

 

3. M.2 Samsung 950 Pro - giant improvement over Samsung 850

 

4. Two M.2 Samsung 950 Pro in RAID 0 - giant improvement over single Samsung 950 Pro

 

Why do you doubt him? I would do those things. In fact, I have entire source code repos  running over 50GB in size on my SSD. I also have several databases running locally from it as well. I can always use more throughput. 

16 minutes ago, adrynalyne said:

Why do you doubt him? I would do those things. In fact, I have entire source code repos  running over 50GB in size on my SSD. I also have several databases running locally from it as well. I can always use more throughput. 

Because a single 950 Pro is so fast. I am not doubting him, but I want to make sure I understand what he has communicated.

 

In RAID-0,  two 950 Pros would be 5,000 MBytes Read and 3,000 MBytes write which has the potential to challenge various software systems that were not tested in such a configuration.

 

Like the X-Files movie "I Want to Believe" and so in a case of a single source of anecdotal evidence, more detail helps a lot.

 

Also, two M.2 slots are practical for a laptop which seems rather exciting with two 950 Pros...

1 hour ago, DevTech said:

did you actualy do all of those things on a single 950 Pro? just want to confirm that for the record since that description you have written would also seem to be describing a single 950 pro compared to anything else.

 

So, you seem to be implying the followinf progression:

 

1. 10,000 rpm hard drive - nice improvement over any hard drive

 

2. Current gen SATA SSD such as Samsung 850 - giant improvement over 10,000 rpm hard drive

 

3. M.2 Samsung 950 Pro - giant improvement over Samsung 850

 

4. Two M.2 Samsung 950 Pro in RAID 0 - giant improvement over single Samsung 950 Pro

 

Yes actually I have tested both situations, 950 pro single and 2 in RAID 0, and RAID 0 is MUCH faster...I am not going to say it again =)

2 minutes ago, Ravensky said:

Yes actually I have tested both situations, 950 pro single and 2 in RAID 0, and RAID 0 is MUCH faster...I am not going to say it again =)

Thanks for the update.

 

But now I am stuck in the movie "Exorcist" where "The Power of Speed Compels Thee"

 

Your experience compels me to somehow find an extra $1,000 from somewhere...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Firefox 152.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Firefox 152.0.1 fixes: Fixed frequent crashes affecting users with Intel Raptor Lake processors. (Bug 2039575) Fixed an issue on macOS where choosing a PDF option, such as "Save as PDF", from the system print dialog would send the job to your printer instead of saving a file. (Bug 2047850) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 146.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Zed 1.7.2 has landed with updated OpenCode models, bug fixes and other improvements by David Uzondu Zed 1.7.2 recently landed on the stable release channel, bringing a host of AI-related features including automatic context compaction and settings-based skill management, along with other things like better Markdown preview rendering and custom git commands in the graph view. Starting with the AI stuff, the developers introduced "/compact", a command that basically summarizes your conversation history on demand. This tool prevents your active chat window from hitting token limits by compressing older parts of the dialogue into a brief overview. In addition to that, the team relocated skill management to the settings UI, improving how the application communicates errors regarding those skills, and updated the OpenCode model roster to support DeepSeek V4 Flash, MiniMax M3, Qwen 3.7 Plus, and Nemotron 3 Ultra Free. External agent users can also monitor context window cost metrics and delete individual sessions directly from their history. Right-clicking ref labels in the git graph now opens a context menu that runs different actions against selected targets, kind of how VS Code does it. Here are some of the bug fixes this new release brings: The active agent fails to auto-select when creating a new git worktree. A scrollbar unexpectedly appears on wrapped code blocks in the agent chat. Collapse indicators for project headers appear when performing sidebar searches. Bracketed ellipsis title prefixes fail to show the ellipsis icon properly. Project icons render incorrectly in the recent projects picker. Diff hunk controls appear inside non-editable commit view multibuffers. The software update button hangs indefinitely on the downloading stage. Restoring an agent terminal in a remote project triggers a sudden crash. Splitting a pane that contains an active commit view causes a crash. Linux Wayland freezes when trying to read the clipboard from laggy external apps. Zed is a "newish" code editor trying to break the massive stronghold VS Code has on the developer community. Funny enough, the editor was created by former GitHub employees who worked on the Atom text editor (which Microsoft killed in 2022, several years after it bought GitHub). The project officially hit version 1.0 back in April, introducing platform parity for Windows and Linux alongside deep support for DeepSeek-V4-Pro.
    • 26H2 absolutely will support ARM Windows just not on devices that came with 26H1. This is evident by the fact I am running 26H2, which on my MacBook Neo and Surface Pro 12 (inch), within a VM.
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      72
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!