Ubuntu GNOME - Corrupted screen at boot...HELP!


Recommended Posts

I'm having some trouble with Ubuntu. Kindly note that I am a newbie to Linux. This is my hardware setup:

 

MSI AM1 motherboard: https://www.msi.com/Motherboard/AM1I.html#hero-overview

Processor: AMD Sempron APU 2650 1.45 Ghz with Radeon R3 graphics

RAM: Corsair 4 GB DDR3 (single stick)

 

I have installed Ubuntu GNOME 16.04 after a few tries. The issue I faced during installation and the one I face during boot is a corrupted display. I have to turn off / reset the system multiple times before it works. I have updated it fully after installation, and also installed a proprietary AMD driver that was under the Additional Drivers section.

 

I get the GRUB boot screen below:

IMG_20160703_134659.jpg

 

After I select it, I get this:

IMG_20160703_134713.jpg

 

I have to hard reset / turn off the system multiple times before it boots.

 

Please help!! :cry::cry:

It looks like a video driver incompatibility. I would reboot until you get a usable system up and running, back up all of your important data then look for another video driver (either the Ubuntu suggested or another version of the proprietary driver). You might also want to try different versions of either Ubuntu or a variation (like Mint or Debian) in a Live CD to see if the video works better with one of them. As another alternative, you could try Xubuntu for a different desktop since it uses less resources than Gnome or KDE.

 

Hope that this helps!

1 minute ago, Barney T. said:

It looks like a video driver incompatibility. I would reboot until you get a usable system up and running, back up all of your important data then look for another video driver (either the Ubuntu suggested or another version of the proprietary driver. You might also want to try different versions of either Ubuntu or a variation (like Mint or Debian) in a Live CD to see if the video works better with one of them.

 

Hope that this helps!

But the thing is, it does eventually boot with the exact same settings (BIOS). Earlier today I was configuring software and users in Ubuntu, no issues. The issue is only during boot. I tried booting with a Mint distro, same graphic corruption. So it is definitely a graphics issue, just that it happens before booting. If and when it eventually boots, everything works perfectly. Also, no drivers showed up under Additional Drivers in the OS.

Yeah, this is a tough one. Since drivers load at boot up, I think that it is an incompatibility instead of a corruption (since you can get it booted up from time to time. here is an incompatibility with the distro and your boot up. Again, if there are valuable files on this computer, I would save them first. Then you can try other distros or solutions.

 

Some others having this problem:

 

http://askubuntu.com/questions/460591/ubuntu-14-04-screen-corruption-on-live-desktop-amd-7970

 

http://www.computerhope.com/forum/index.php?topic=127818.0

You'li have to try the Live CD. Linux distros can be burned in .iso format as an image file and booted up as a Live CD. This installs the distro to RAM instead of the had drive. Then, you can see if it works better with your hardware. Post how this works and we can move forward! Each distro has it's own make up so the driver make-up could be different. Based on your computer hardware, the results will be different. Good luck and let us know.

40 minutes ago, Barney T. said:

You'li have to try the Live CD. Linux distros can be burned in .iso format as an image file and booted up as a Live CD. This installs the distro to RAM instead of the had drive. Then, you can see if it works better with your hardware. Post how this works and we can move forward! Each distro has it's own make up so the driver make-up could be different. Based on your computer hardware, the results will be different. Good luck and let us know.

I've tried with Fedora and Mint. They don't even let me boot into the Live environment! Same corrupted screen when I select the boot without installing options in each of them.

23 minutes ago, Mindovermaster said:

Tried exactly like mentioned in the link you gave, same problem.

Hmmm, looks like something in your hardware might not be compatible with Linux. The fact that other distros are unable to fix this problem points to hardware (still most likely your video card). Also, your GRUB menu boots up fine, so I believe that Ubuntu is installed correctly on your hard drive. Another option is to try another video card (if you have one lying around) and try to boot up using that instead. NVIDIA has always had a better track record with Linux.You'd have to select it in the BIOS or in the Linux settings. I am sorry that you are having such problems! :(

45 minutes ago, Barney T. said:

NVIDIA has always had a better track record with Linux.

Truth, that. When I moved from my Radeon 7850 to my 750Ti, my system became a lot better...

3 hours ago, Mindovermaster said:

thats exactly what i was thinking tbh, Linux Mint 18 did this with me also, nomodeset fixed this issue for me on mint (intel HD gfx)

I've run into this issue before. It's always, always driver-related. It's got nothing to do with your hardware "going bad" or anything, so don't panic. :) 

 

Common problem. Nvidia users will see this a lot when using the open-source driver, and it will mostly correct itself; ie, there will still be artifacts on the screen but the user can at least get the system installed and then the proprietary drivers installed afterwards and the problem is eliminated upon next reboot.

 

I've only ever had one chipset that had Radeon R3 graphics on the chip in the house, a 5350 APU, and I never could get it running properly with Linux. Installed Windows on it and it's actually a fairly decent machine for what it is.

 

My advice is to get yourself a cheap Nvidia card, like a 610. They're $35~$55 on Newegg, and they'll push most games ... if you turn the graphics settings all the way down. I could get 25~55 fps in The Secret World with my old one. That's playable in my book. :yes: 

11 hours ago, Unobscured Vision said:

I've run into this issue before. It's always, always driver-related. It's got nothing to do with your hardware "going bad" or anything, so don't panic. :) 

 

Common problem. Nvidia users will see this a lot when using the open-source driver, and it will mostly correct itself; ie, there will still be artifacts on the screen but the user can at least get the system installed and then the proprietary drivers installed afterwards and the problem is eliminated upon next reboot.

 

I've only ever had one chipset that had Radeon R3 graphics on the chip in the house, a 5350 APU, and I never could get it running properly with Linux. Installed Windows on it and it's actually a fairly decent machine for what it is.

 

My advice is to get yourself a cheap Nvidia card, like a 610. They're $35~$55 on Newegg, and they'll push most games ... if you turn the graphics settings all the way down. I could get 25~55 fps in The Secret World with my old one. That's playable in my book. :yes: 

 

14 hours ago, Barney T. said:

Hmmm, looks like something in your hardware might not be compatible with Linux. The fact that other distros are unable to fix this problem points to hardware (still most likely your video card). Also, your GRUB menu boots up fine, so I believe that Ubuntu is installed correctly on your hard drive. Another option is to try another video card (if you have one lying around) and try to boot up using that instead. NVIDIA has always had a better track record with Linux.You'd have to select it in the BIOS or in the Linux settings. I am sorry that you are having such problems! :(

 

Looks like my only option is to run Windows on it then. The problem is this is a Mini ITX board, so there is only 1 PCI-E slot. I need this slot later on for a LAN card, as I intend to have a PFSense router VM running as well.

 

Thanks for all your help! :)

Understood. Yeah, that would be a problem. I suggest you try an older version of Mint based on 14.04 Ubuntu that has the proprietary drivers, such as 17.3. It'll be supported until 2019, and AMD have already said they're going to have something figured out by the end of the year.

 

Unless this was Mint 17.3/Ubuntu 14.04.x; in which case yeah .. but my own experience says you'll end up much the same way I did -- getting Windows for that particular hardware.

 

I have to say that for AMD being a full member of the OSS Foundation and everything, they sure are a bunch of foot-dragging sloths when it comes to actually supporting their own products on Linux and having some proper drivers. It's quite disgusting, really.

On 7/4/2016 at 8:17 PM, Unobscured Vision said:

Understood. Yeah, that would be a problem. I suggest you try an older version of Mint based on 14.04 Ubuntu that has the proprietary drivers, such as 17.3. It'll be supported until 2019, and AMD have already said they're going to have something figured out by the end of the year.

Oh, so 17.3 will not give me this problem then? If yes, that would be awesome! I tried the latest MInt 18 and plain Ubuntu 16.04. Strange that the older version of the OS has the drivers and not the new!! :s

Actually I think I'll just proceed with installing WIndows on it. It is an additional cost because of the license, but it is hassle free. And I can always run OwnCloud and PFSense in VM's. :)

 

Do you think this setup will be up to the task? Windows 10, the above mentioned VM's and incremental backups from computers on LAN. Incremental individual files that is, not image backups.

  • 2 weeks later...
On 7/3/2016 at 7:26 AM, Barney T. said:

Hmmm, looks like something in your hardware might not be compatible with Linux. The fact that other distros are unable to fix this problem points to hardware (still most likely your video card). Also, your GRUB menu boots up fine, so I believe that Ubuntu is installed correctly on your hard drive. Another option is to try another video card (if you have one lying around) and try to boot up using that instead. NVIDIA has always had a better track record with Linux.You'd have to select it in the BIOS or in the Linux settings. I am sorry that you are having such problems! :(

You're right. Back in the early.. stone age days of Linux, 95-98-ish, I tried linux(AMD 600Mhz Slot A CPU day) but kept getting corrupt screens. my cards weren't up on drivers. So  I concur with Barney. even though that was many moons ago. But same exact problem. if you get your system back up, go to the forums and let the devs of the distros know of your issues. the only way for them to get the issue fixed.

This topic is now closed to further replies.
  • Posts

    • Calibre 9.10 by Razvan Serea  Calibre is an open source e-book library management application that enables you to manage your e-book collection, convert e-books between different formats, synchronize with popular e-book reader devices, and read your e-books with the included viewer. It acts as an e-library and also allows for format conversion, news feeds to e-book conversion, as well as e-book reader sync features and an integrated e-book viewer. Calibre's features include: library management; format conversion (all major ebook formats); syncing to e-book reader devices; fetching news from the Web and converting it into ebook form; viewing many different e-book formats, giving you access to your book collection over the internet using just a browser. Calibre 9.10 changelog: New features Content server: A new "modern" interface with a sidebar to ease navigation Content server: When used with HTTPS allow installation as a PWA (Progressive Web App) Edit book: Saved searches: When filtering the list of saved searches match by keywords CSS parsing: Add support for CSS Level 4 selectors Cover grid: When using an image larger than the viewport as a texture scale it to fit the viewport Annotations browser: Allow restricting displayed annotations by custom annotation styles as well Edit book: Compress images: Add option to convert PNG images to JPEG or WEBP Bug fixes E-book viewer: Fix IME on Windows not working when typing in notes for highlights Conversion: Heuristics: Improve performance in some pathological cases SNB Input: Fix error on some input files Windows: fix rare crash when too many notifications are displayed at once Fix duplicating of books not duplicating value from enumerated columns when the column has a default value defined Fix a regression in 9.8 that caused errors from AI plugin providers to be silently swallowed and not displayed to user Fix CSV export invalid when exporting comments field Disallow Python templates when reading book metadata (CVE-2026-53511) Improved news sources The Week Economist Espresso Horizons Download: Calibre 9.10 | Portable | ~200.0 MB (Open Source) Download: Calibre for MacOS | 327.0 MB Download: Calibre for Linux View: Calibre Home Page | Calibre Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Malwarebytes Anti-Malware 5.6.1.257 by Razvan Serea Malwarebytes is a high performance anti-malware application that thoroughly removes even the most advanced malware and spyware. Malwarebytes version 5.**** brings comprehensive protection against today’s threat landscape so that you can finally replace your traditional antivirus. You can finally replace your traditional antivirus, thanks to a innovative and layered approach to prevent malware infections using a healthy combination of proactive and signature-less technologies. While signatures are still effective against threats like potentially unwanted programs, the majority of malware detection events already come from signature-less technologies like Malwarebytes Anti-Exploit and Malwarebytes Anti-Ransomware; that trend will only continue to grow. For many of you, this is something you already know, since over 50% of the users already run Malwarebytes as their sole security software, without any third-party antivirus. What's new in Malwarebytes 5.****: Unified user experience - For the first time, Malwarebytes now provides a consistent experience across all of our desktop and mobile products courtesy of an all new and reimagined user experience powered by a faster and more responsive UI all managed through an intuitive dashboard. Modern security and privacy integrations - Antivirus and ultra-fast VPN come together seamlessly in one easy-to-use solution. Whether you’re looking for a next-gen VPN to secure your online activity, or harnessing the power of Browser Guard to block ad trackers and scam sites, taking charge of your privacy is simple. Trusted Advisor - Empowers you with real-time insights, easy-to-read protection score and expert guidance that puts you in control over your security and privacy. Malwarebytes 5.6.1.257 changelog: Features and improvements Updated the sign-in section of the My Subscription page to clarify that users can activate their subscription by signing in with their Malwarebytes account. Updated the uninstall flow to collect more meaningful insights and address customer concerns. Refreshed the app's tutorial layout for a better look and feel. Issues fixed Fixed an outdated link when clicking Take action after running a Digital Footprint Scan. Miscellaneous bug fixes. Download: Malwarebytes 5.6.1.257 | 472.0 MB (Free, paid upgrade available) Links: Malwarebytes Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yep, not sure where the surprise is here. They release a new model for every phone, every year
    • AI would probably be better utilised replacing Executives than Engineers.
    • RapidRAW 1.5.8 by Razvan Serea RapidRAW is a beautiful, non-destructive, GPU‑accelerated RAW image editor designed for speed and simplicity. It uses a lightweight (~30 MB), efficient code base built with Rust, React and Tauri. Ideal for Lightroom workflows, it offers rich editing tools—exposure, contrast, highlights, shadows, whites/blacks, tone curves, HSL mixer, dehaze, vignetting, film grain, sharpening, clarity and noise reduction—processed in real-time on the GPU. Features include intuitive masking (brush, linear, radial, AI-powered subject and foreground detection), generative edit layers (via ComfyUI), 32‑bit precision, and full RAW format support through rawler. RapidRAW also provides library management (folder navigation, ratings, metadata, EXIF viewer), batch operations, export presets (JPEG/PNG/TIFF), sidecar editing (.rrdata), undo/redo history, customizable UI themes, smooth animations, resizable panels, and preset copy/paste. A modern high-performance Lightroom alternative with polished UX and creative tools, RapidRAW brings powerful photo editing to photographers seeking speed, responsive GPU feedback, and streamlined workflows. RapidRAW v1.5.8 release notes: This release introduces several new editing tools and workflow refinements designed to improve both photo editing and library management. It expands creative flexibility with the addition of a preset intensity slider and a global hue adjustment, while also introducing convenient navigation features such as quick bottom bar filters and folder sorting. Behind the scenes, the update addresses background indexing issues and ensures folder image counts are updated correctly. It also broadens accessibility by adding support for Korean and Traditional Chinese. [full changelog] Download: RapidRAW 1.5.8 | ARM64 | ~20.0 MB (Open Source) View: RapidRAW Home Page | Screenshot | Other operating systems Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      405
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!