Which direction for rear case fan to face?


Recommended Posts

This morning i stripped the PC to clean out all the dust. The only problem is i can't remember which way the rear case fan was facing.

 

It is an Akasa fan. On one side is a foil akasa badge in the middle with nothing covering the fan blades.

 

On the other side is a red akasa badge in the middle with like 'spider' legs blocking (if you will) access to the blades. Also on this side is the wiring for the fan.

 

There are 2 arrows on the base of the fan. One points to the side corner where the wiring has been ran to & the other arrow points towards the side that has the 'spider legs' & the red Akasa badge.

 

I'm just wondering which side of the fan should face OUTWARDS?

 

 

IMG_6900.JPG

IMG_6901.JPG

IMG_6902.JPG

Well either i've now installed it incorrectly (i've just put the label with the red writing to the outside) or i've had it installed incorrectly for years because the wire that connects to the motherboard is now no longer long enough (without loosening the tie).

 

The arrow is pointing to the outside now anyway.

 

Oh 7 i also have a front fan.

As far as I know, the rear fan is always pushing air out, specially if you have front fans which pull air inside.   Fans on the bottom should also pull air in while fans on the top, IMO, should push air out as well, because hot air goes up.

10 minutes ago, George P said:

As far as I know, the rear fan is always pushing air out, specially if you have front fans which pull air inside.   Fans on the bottom should also pull air in while fans on the top, IMO, should push air out as well, because hot air goes up.

Yeah that's what i was thinking also.

 

But i was at the time wondering which way around i should place the fan. Side 1 or side 2.

3 hours ago, Technique said:

Yeah that's what i was thinking also.

 

But i was at the time wondering which way around i should place the fan. Side 1 or side 2.

Your question was answered many times. The side with the logo faces in to the case the side without the logo faces towards the rear. That side blow the air out of the case. If you want to test it hold a tissue on it, it will go with the air flow.

fab.jpgpc-case-fan-direction-l-2337d2151ba630dd.jpg

2 minutes ago, xendrome said:

There are typically arrows on the plastic that show the airflow direction, but yes, air should flow from front to back.

Not all, but yes most 

11 minutes ago, Gary7 said:

I had no idea it took so may posts to determine the direction of air flow on a case fan.:)

I think he just missed the point with our other information...

The arrows are actually right there on the 3rd picture above your thumb.

 

The one pointing to the edge points to the direction of airflow, while the one pointing along the fan indicates rotation (not as important).

 

You would want to install the fan so that the arrow points to where you want the air to flow. Optimal direction for the rear is outwards as per everyone else's suggestion.

 

 

IMG_6902.jpg

36 minutes ago, Hum said:

Without looking at others posts, I always thought Rear fans sucked out heat, while a Front fan blew in air.

Always made sense to me considering that the PSU blows out.  Anytime I built a PC (which has been a while) I always faced the rear fans out.  Side fans out as well as the top fans.

My post from another thread:

 

There is rarely such as thing as "good air flow" - most people use the term mean some sort of imaginary diagram in their head of what the air is doing but in almost every case where is gets a real world test with a heat sensor gun, the imagination is wrong because humans and air think differently.

 

Without test equipment, the single thing completely in your power to accomplish is to aim a fan straight at the item you want to cool. With a modern mobo, it becomes trivial and most people use too many fans.

 

1. blow cool air from outside across cpu water radiator - in typical case, this means turning the fans around to blow the other way.

 

2. only in rare cases can you do anything about the typically weird GPU cooling, but when lucky give it cool air.

 

3. power supply comes with a fan - usually not much can be done with it

 

4. a case fan to blow cool outside air on mobo - usually any slow air movement is good enuff

 

5. a case fan to blow cool outside air on hard drives - usually any slow air movement is good enuff

 

6. rip out all other case fans - they typically just mess things up

 

-------------------------------------------------------------

 

It is so hard to get people to wrap there head around  a subject where "everybody knows" the answer. The old suck cool air in the front, blow out back myth was promoted by OEM manufacturers like Dell and HP during a time in computer history when components generated far less heat and the OEMS would also tweak the system with tight fitting cases and plastic air ducts all over the place.

 

So since I had a recent post handy, who knows, I might help somebody consider the mythology involved:

 

1. Sucking air requires suction! Suction requires a completely air tight enclosure.

 

2. Blowing air out of the case is similar to suction. A fan blowing outwards will grab the easiest available air which is usually nearby holes in the case. A fan blowing out is just generating Noise for almost no cooling effect.

 

3. Even if you had completely sealed suction which NEVER happens in real life, the air can still decide to do weird things which is why in the real engineering world air flow gets TESTED. Cars, airplanes, computer cases - all the same mysteries of Fluid Dynamics and Turbulence. So if you don't own a Heat Sensor Gun, it's all just guesswork.

 

4. What happens if you blow air inwards instead? A) it is cool air B) you know where it is going for about 6 inches C) it has no problem finding an exit route in a typical leaky case

 

10 minutes ago, techbeck said:

Always made sense to me considering that the PSU blows out.  Anytime I built a PC (which has been a while) I always faced the rear fans out.  Side fans out as well as the top fans.

Wow - that's a lot of fans doing nothing. Rip out all the fans blowing air out and leave the nice big air holes in their place. Most likely your temp measurements will be the same or lower and your ears will feel a liitle bit better.

9 minutes ago, DevTech said:

Wow - that's a lot of fans doing nothing. Rip out all the fans blowing air out and leave the nice big air holes in their place. Most likely your temp measurements will be the same or lower and your ears will feel a liitle bit better.

Just one case I bought.  Back when I wanted one that had blue lights and everything.  Had two big fans on the front blowing air in....small fan on the back, top, and side across from the CPU fan.  Fans didnt cause a lot of noise actually.  And that was back when the IDE ribbon cables were a PITA the route so they did not block airflow.  So helped lower the temp a little.  Most cases I bought just had a couple in the front and then the back.

8 minutes ago, JHBrown said:

For optimal performance, exhaust on the rear/top of the case, and intake up front. This is best for gaming, more FPS(Uber GPU cooling)...

 

 

J335f.jpg

Geesh....guy i used to work with actually suggested this.  Coworkers CPU fan died and his fix was to leave the case open and place a desktop fan to blow air on the CPU to keep it cool.  Needless to say, he was not around much after.

9 minutes ago, Mindovermaster said:

Dev, just drop it. The OP got the message, don't give him a history lesson...

Oh but that is too narrow a point of view.

 

If I thought that the only recipient of what I type in any thread was the OP then I wouldn't be bothering with any of this. I am trying to help people for the benefit of all mankind so to speak since this information is available to the mighty Google.

 

Of course in this particular case I have almost no chance of stemming the tide of miss-information in the old and tired "blow air in the front and suck it out the back at the top because heat rises blah de blah useless meme"

 

Science is not about logical thinking which in this case seems to totally fail people, but instead the root of all Science is TESTING. You can use logic to form a starting hypothesis, but in the end the TESTING is the Science.

 

 

 

17 minutes ago, JHBrown said:

For optimal performance, exhaust on the rear/top of the case, and intake up front. Here is the best for gaming, more FPS(Uber GPU cooling)...

 

 

J335f.jpg

If you read my posts here, your part A) does nothing

 

But your part B) blow air right on the thing that needs cooling is exactly right and the picture is a great example of something that would actually work. If the fan has good bearings and runs at a slow speed, it will cool better and quieter than most solutions!

 

Now spray the whole thing in lime green paint and slap a NVIDIA logo on it...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • As I've been usually saying lately - we all can thank "AI" for this.
    • Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. My Windows11 device on the Preview Channel just got 26220.8728. My guess is this build is a nightly update from 26220.8690.
    • Traffic has a surprisingly unexpected impact on your surroundings by Sayan Sen Image by Radik 2707 via Pexels A collaborative study by researchers from several Israeli institutions found that everyday pollution from traffic and industrial activity measurably changed the atmospheric electric field over the Tel Aviv metropolitan area, providing new evidence of how human activity can influence the lower atmosphere. The research was led by Dr. Roy Yaniv of the Hebrew University of Jerusalem and the Gertner Institute at Sheba Medical Center, Dr. Assaf Hochman of the Fredy & Nadine Herrmann Institute of Earth Sciences at the Hebrew University, and Prof. Yoav Yair of Reichman University. The study also involved Itay Froomer, a student from Hadera High School and the Israeli Museum of Medicine and Science (Technoda), who carried out the work as part of the Ministry of Education's 5-unit physics research track. The researchers focused on the atmospheric electric field under fair-weather conditions. Even in the absence of storms, a weak electric field naturally exists between Earth's surface and the atmosphere. One of the main ways scientists measure this field is through the Potential Gradient (PG), which is the inverse of the vertical component of the electric field. PG is a key part of the global electric circuit, a planet-wide system of electrical currents maintained by thunderstorms and electrified clouds around the world. Scientists have long known that the atmospheric electric field can be influenced by factors ranging from large-scale atmospheric processes to local weather conditions such as dust, fog and clouds. Human-made pollution is also known to play a role, but understanding exactly how urban emissions affect the electric field close to the ground has remained an area of ongoing research. To investigate this relationship, the team analyzed measurements from a newly installed electric field mill, an instrument used to continuously monitor the strength of the atmospheric electric field. The instrument was installed at the Center for Technological Education (Roter House) in Holon and became operational in August 2024. It was funded by Israel's Ministry of Education and the Holon municipality. The electric field mill forms part of a broader monitoring network that includes nearby meteorological stations and air-quality monitoring sites. This allowed researchers to compare electric field measurements with detailed weather data and pollution records to better understand what was driving changes in the Potential Gradient. The study focused on two major urban pollutants: fine particulate matter (PM2.5) and nitrogen oxides (NOx), both commonly produced by vehicle traffic and industrial activity. PM2.5 refers to microscopic airborne particles small enough to remain suspended in the atmosphere for extended periods, while NOx is a group of gases released during fuel combustion. Researchers examined daily, weekly and seasonal patterns in the atmospheric electric field and compared them with changes in pollutant concentrations. Their analysis revealed a clear relationship between NOx levels and changes in the Potential Gradient, particularly during morning and evening rush hours when traffic emissions were at their highest. “What we observe is a direct physical link between emission peaks and electrical variability,” explained Dr. Roy Yaniv. “NOx reduces atmospheric conductivity very quickly, so the electric field responds almost instantaneously during traffic rush hours.” Atmospheric conductivity describes how easily electrical charges move through the air. According to the researchers, nitrogen oxides rapidly alter this conductivity, causing a near-immediate response in the electric field. PM2.5, however, was associated with a delayed response. The researchers attributed this difference to the particles' longer atmospheric residence time, meaning they remain in the atmosphere for longer periods, as well as their different microphysical interactions with surrounding air and atmospheric components. The study also identified a pronounced "weekend effect." In Israel, traffic volumes and some industrial activity decline significantly on Fridays and Saturdays. During these periods, concentrations of both NOx and PM2.5 dropped, and corresponding changes were observed in the atmospheric electric field. “The weekend signal demonstrates just how sensitive the electric field is to changes in human activity,” the researchers noted. “When emissions decline, the electrical environment adjusts at once, providing a high-resolution indicator of urban atmospheric conditions.” The findings showed that pollution levels can influence not only the chemical composition of the atmosphere but also its electrical properties. Researchers said the results strengthened the case for using atmospheric electricity as an additional tool for environmental monitoring, particularly in densely populated urban areas where anthropogenic, or human-caused, influences are most pronounced. The study also pointed to potential public health applications. By combining air-quality measurements with observations of atmospheric electricity, researchers said they could gain a more complete picture of how urban atmospheric conditions change over time. “Integrating air-quality data with electric-field measurements gives us a clearer picture of how the lower atmosphere evolves moment by moment,” the researchers added. “It’s a framework that can support both scientific insight and practical environmental decision-making.” Beyond the scientific findings, the project highlighted a collaboration between universities, public institutions and secondary education. Researchers said the work demonstrated how students could take part in real-world environmental research while contributing to studies of air quality, atmospheric processes and their potential effects on society. Source: Hebrew University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • We aren't even at the all-star game and Microsoft is talking about an update that will most likely be released during the World Series if not after. A lot can happen in the world between now and the 2026 World Series, including the 2026 FIFA Cup. Tell me about it again after the FIFA Cup is concluded. That should allow plenty of time to prepare for it.
    • Great, tell me when I have a "Bad Pool Caller" elsewhere not in Windoze.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      539
    2. 2
      +Edouard
      186
    3. 3
      PsYcHoKiLLa
      79
    4. 4
      Michael Scrip
      77
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!