Why are there motherboards that support DDR3 when skylake doesn't support it?


Recommended Posts

Last night before I went to bed I decided to do some research into using DDR3 memory with skylake CPUs and I found that skylake doesn't support memory that run any higher than 1.35 volts. So far I am on the same page.

Then I decided to look at a motherboard that has DDR3L support and I found that the memory that is in my current system is on the supported list and that memory runs at 1.65 volts.

How can a motherboard vendor recommend memory that runs at 1.65 volts when skylake only support up to 1.35 volts? Is there anything that I may be missing?

  On 08/09/2016 at 21:44, Danielx64 said:

Nope but I am just trying to understand why vendors like gigabyte and such make motherboards with support for DDR3.

Expand  

Because there are people that still use DDR3, I am one of them, but my PC is 6 years old. Built it in 2010.

  On 08/09/2016 at 21:53, Danielx64 said:

Yeah but would you be killing your CPU with the over voltage?

Expand  

Nope the voltage applied to rambus is different to the voltage to cpu buddy. The mobo regulates what devices receive what voltage, just as psus supply +12, +5 and +3.3v DC to mobo itself. 

I do not think you'll get a clear answer on this...your question might be better asked to the board makers.  Manufactures who list 1.65v DDR3 on their recommended vendor list ... obviously feel confident that the memory will be stable and would not harm the Skylake IMC.

The CPU and the RAM manufacturer are likely 2 different companies.

 

CPUs and RAM  don't necessarily use the same voltages.

 

A motherboard maker wants to have as wide of compatibility as possible, so you will chose them.

  On 08/09/2016 at 22:20, jjkusaf said:

I do not think you'll get a clear answer on this...your question might be better asked to the board makers.  Manufactures who list 1.65v DDR3 on their recommended vendor list ... obviously feel confident that the memory will be stable and would not harm the Skylake IMC.

Expand  

Yeah I think I will go and ask ASUS and maybe Gigabyte (even though I don't like then now) and see whats up with listing 1.65v DDR3 memory.

 

This is where it started: http://wccftech.com/skylake-does-not-support-ddr3-damage-ddr3l-only/

If the mobo maker says this RAM is supported then it's supported, you might be overthinking it, you can run different voltages to different parts of the mobo, it's part of OC'ing, you can OC just the RAM for example and not touch the CPU or vice versa.     The DDR4 RAM i'm running on my new skylake PC is rated up to 2400mhz but it's running at the default 2133mhz atm, I could OC it up if I felt like it, but I don't see the need to do so.

  On 09/09/2016 at 09:46, George P said:

If the mobo maker says this RAM is supported then it's supported, you might be overthinking it, you can run different voltages to different parts of the mobo, it's part of OC'ing, you can OC just the RAM for example and not touch the CPU or vice versa.     The DDR4 RAM i'm running on my new skylake PC is rated up to 2400mhz but it's running at the default 2133mhz atm, I could OC it up if I felt like it, but I don't see the need to do so.

Expand  

I think the problem is very real, just happen to come across: http://www.tomshardware.com/news/skylake-memory-support,30185.html So while short term there is no issues but longer terms there may be serious issues.

  On 09/09/2016 at 11:08, Boo Berry said:

Actually, Skylake is backwards compatible with DDR3... well DDR3L.

Expand  

Am I correct that the different between DDR3 and DDR3L is the voltage that the memory runs at?

You *can* use DDR3 with Skylake, depending on the motherboard... but I wouldn't recommend using it for a prolonged period.

 

  On 09/09/2016 at 11:19, Danielx64 said:

Am I correct that the different between DDR3 and DDR3L is the voltage that the memory runs at?

Expand  

The L stands for Low Voltage. So yes - DDR3L runs at 1.35V vs. 1.50V or 1.65V with DDR3.

  On 09/09/2016 at 09:17, Danielx64 said:

Yeah I think I will go and ask ASUS and maybe Gigabyte (even though I don't like then now) and see whats up with listing 1.65v DDR3 memory.

 

This is where it started: http://wccftech.com/skylake-does-not-support-ddr3-damage-ddr3l-only/

Expand  

Maybe thats signal voltage or digital data voltage that the RAM transmits to the CPU but you could have hardware between the CPU and RAM to step down signal voltage to the CPU and step up signal voltage from the CPU to the RAM to get around the problem not sure if thats possible either that or Intel overstated the issue?

  On 08/09/2016 at 20:08, Danielx64 said:

Last night before I went to bed I decided to do some research into using DDR3 memory with skylake CPUs and I found that skylake doesn't support memory that run any higher than 1.35 volts. So far I am on the same page.

Then I decided to look at a motherboard that has DDR3L support and I found that the memory that is in my current system is on the supported list and that memory runs at 1.65 volts.

How can a motherboard vendor recommend memory that runs at 1.65 volts when skylake only support up to 1.35 volts? Is there anything that I may be missing?

Expand  

The DDR3 that Skylake supports is low-voltage DDR3, or DDR-3L; it does not use the same memory sockets as either standard DDR3 OR DDR4.  If you see a motherboard that supports DDR-3L "in the wild", it was likely intended for OEM/ODM usage originally, as DDR-3L is not sold retail (and is priced accordingly compared to DDR4).  It is for price and availability reasons that I recommend DDR4 for LGA1151; where I recommend DDR3 is for LGA1150 or older.  Right now, DDR3 and DDR4 (in the 8GB DIMM size) actually have pricing parity - however, this is true of no other memory size (primarily due to 8GB being the largest common DDR3 DIMM size for desktops)

  On 10/09/2016 at 20:34, PGHammer said:

The DDR3 that Skylake supports is low-voltage DDR3, or DDR-3L; it does not use the same memory sockets as either standard DDR3 OR DDR4.  If you see a motherboard that supports DDR-3L "in the wild", it was likely intended for OEM/ODM usage originally, as DDR-3L is not sold retail (and is priced accordingly compared to DDR4).  It is for price and availability reasons that I recommend DDR4 for LGA1151; where I recommend DDR3 is for LGA1150 or older.  Right now, DDR3 and DDR4 (in the 8GB DIMM size) actually have pricing parity - however, this is true of no other memory size (primarily due to 8GB being the largest common DDR3 DIMM size for desktops)

Expand  

DDR3L is not sold retail???

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16820156047&cm_re=ddr3l-_-20-156-047-_-Product

http://www.newegg.com/Product/Product.aspx?Item=N82E16820226757&cm_re=ddr3l-_-20-226-757-_-Product

http://www.crucial.com/usa/en/ct102464bd160b

Check the pricing compared to DDR4.  Newegg sells to OEMs/ODMs - not exactly the average Joe.  (They sell to average Joes as well - which is why I can't exactly count them as a "typical e-tailer".)

  On 10/09/2016 at 20:41, PGHammer said:

Check the pricing compared to DDR4.  Newegg sells to OEMs/ODMs - not exactly the average Joe.  (They sell to average Joes as well - which is why I can't exactly count them as a "typical e-tailer".)

Expand  

Hence I linked Crucial. I can provide others if you like.

https://www.amazon.com/Kingston-Technology-1600MHz-Voltage-HX316LC10FB/dp/B014R9BK94/ref=sr_1_14?ie=UTF8&qid=1473540216&sr=8-14&keywords=DDR3L

https://www.amazon.com/Corsair-Vengeance-1600MHz-Systems-CMY32GX3M4C1600C9/dp/B0143UM082/ref=sr_1_17?ie=UTF8&qid=1473540278&sr=8-17&keywords=DDR3L

 

How many sellers would you like me to list? Best Buy and the likes don't count as they never have anything but a small sampling of memory.

 


As for price, I made no mention nor debate of it, so I am not going to start now.

So really the issue have been overblown by Tomshardware and  wccftech?

 

Anyhow here's a board from ASUS that support ram at 1.65v: https://www.asus.com/us/Motherboards/Z170-P-D3/

 

And I just found this: https://www.reddit.com/r/pcmasterrace/comments/3toyy6/skylake_and_ddr3_what_you_need_to_know/

  On 10/09/2016 at 20:21, PeterUK said:

Maybe thats signal voltage or digital data voltage that the RAM transmits to the CPU but you could have hardware between the CPU and RAM to step down signal voltage to the CPU and step up signal voltage from the CPU to the RAM to get around the problem not sure if thats possible either that or Intel overstated the issue?

Expand  

You can (in general) convert down with voltage (you know that PSU?) but not sure about going the other way.

 

  On 11/09/2016 at 08:17, Danielx64 said:

You can (in general) convert down with voltage (you know that PSU?) but not sure about going the other way.

Expand  

I'm saying about the signal voltage or digital data voltage that the RAM transmits to the CPU not the power the RAM get from the PSU.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • All set as AI did the trick
    • AnyDesk 9.5.7 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just five megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.5.7 changelog: Fixed Bugs Fixed deadlock when updating chat server Fixed crashes caused by exceptions in internal communication layer Fixed crash when opening new monitor in Session in a new window Fixed crash on shutdown Fixed bug that allowed naming Permission Profiles identical to predefined Profiles Fixed bug that could cause licensed remote clients to show up as free Fixed visual bug that caused Set-Password button to show up when Unattended Access was disabled Fixed bug that lead to selecting the wrong initial resolution for webcams New Features Added command line option --record-screen to start a Screen Recording Other Changes Improved visual consistency in some list views Download: AnyDesk 9.5.7 | macOS ~14.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • WUT?! Tell us you've never built desktop software without telling us you've never built desktop software... The chromium rendering engine is the content-rendering engine for "chromium-based browsers," but that does NOT mean there's a full-on UI underneath that is somehow bloating these products. The bloat is from the additional UI components that the browser vendor (Vivaldi) is adding atop the base package. Most chromium browsers customize the default skin/theme of the overall package so there's absolutely zero added overhead; it's really just a different CSS-based theme pack. Vivaldi, however, adds more than just a different skin; they add built-in extensions (that are managed by other built-in extensions), add other customization modules, and all kinds of other bloat -- and these add-ons are EXACTLY where the resource-hogging stems from. The mere fact it's a chromium-based browser has no impact on the matter. Lastly, power users literally DO notice resource-intensive applications -- they'll even be familiar with tools and widgets that expose those measurements the way only a power-user would! General consumers, however, would simply remark that their rig is sluggish and probably outdated and blindly upgrade to whatever the salespeople are hawking at the local computer store. General consumers wouldn't even upgrade their existing computer cuz they wouldn't know how to!
    • Nope, they just removed the game from sales.
  • Recent Achievements

    • First Post
      Celilo earned a badge
      First Post
    • One Year In
      K.I.S.S. earned a badge
      One Year In
    • Week One Done
      solidox earned a badge
      Week One Done
    • Dedicated
      solidox earned a badge
      Dedicated
    • Week One Done
      Devesh Beri earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      438
    2. 2
      ATLien_0
      166
    3. 3
      +FloatingFatMan
      151
    4. 4
      Nick H.
      66
    5. 5
      macoman
      63
  • Tell a friend

    Love Neowin? Tell a friend!