Adding Ram??


Recommended Posts

hello, and need some advise:

how does one add ram?

i have a dell 4100 series

800mhz-128ram

i am told i can add up to 512? i believe

and apparently i have a slot(?) for this. can i just pop the hood and add it?

and what brand name and all that?

never have done this kinda thing..so act as if i was an idiot(lol)

thanks in advance:D :cool: :D

Link to comment
https://www.neowin.net/forum/topic/1311-adding-ram/
Share on other sites

Try this link.

http://www.crucial.com/store/listparts.asp...MHz%29&x=6&y=12

The 4100 has two slots for memory, you will have one 128mb stick pre-installed, so the best advice would be to go for a 256mb stick as it's rather inexpensive, giving you a total of 384, enough for most computing...

$34.19 = 256mb SDRAM, PC133 CL=3 Non-parity

And they even give you FREE UPS 2nd day shipping. And it's great memory!, I have two 128mb pc100 sticks from Crucial that i've had for a long time...!

Installing memory in the 4100 is actually easy, Dell make their cases so that it only takes one thumb screw to take the side of the box off, plus the directions that crucial give you are excellent.

Link to comment
https://www.neowin.net/forum/topic/1311-adding-ram/#findComment-5789
Share on other sites

Hey I got another one for you me101 :) When it comes to nitty gritty I tend to get a bit lost :)

I have a Microstar M6167 mobo (worst in the world, no jumpers AT ALL) with 128 megs of memory in the long slot at the top :) (Athlon K7 - 650, tho I think the shop conned me and sold me an overclocked 500 as I never seen the speed get over 630ish)

What type n how much can I / do I put in?

Hehehe, have fun

Link to comment
https://www.neowin.net/forum/topic/1311-adding-ram/#findComment-5792
Share on other sites

he he, having fun...

ok, from this page, http://hardwarezone.phing.com/reviews/mb/m...ms6167/6167.htm i see that the memory for this board is

Supports 168-pin unbuffered PC100/PC133 SDRAM (Supports ECC, 1-bit Error Code Correct function)

So according to Crucial, you could just pick any PC100/133 memory that they have...

:p

Link to comment
https://www.neowin.net/forum/topic/1311-adding-ram/#findComment-5793
Share on other sites

To add your RAM Is the simplest upgrade in the world...Open your case! Find where your other RAM chip is...there should be a few free slots and slot it in! You don't need drivers or anything....To find out if it's worked then on Bootup your computer should do a memory check....if the number up there changes to the new amount then it's on.

You probably want more detail but I'm not that helpful! SORRY

Link to comment
https://www.neowin.net/forum/topic/1311-adding-ram/#findComment-6187
Share on other sites

From a hardware speed standpoint, if you're adding, say, 256M when you currently have 128M, take the 128M DIMM out of Slot 1 and put it in Slot 2, then put the 256M DIMM in Slot 1. It makes a miniscule difference in time, but, hey, who doesn't want free time?

For the price, though, just buy 2 256Meggers and be done with it!

Link to comment
https://www.neowin.net/forum/topic/1311-adding-ram/#findComment-6345
Share on other sites

which one do you recommend

e-buyer or crucial??

the price looks right for e-buyer but haven't heard much about them??

and since i have two slots should i get 256 stick and a 128 to make 512??? sorry this is new to me!! thanks in advance:cool:

Link to comment
https://www.neowin.net/forum/topic/1311-adding-ram/#findComment-6816
Share on other sites

  Quote
Originally posted by hayc59  

which one do you recommend

e-buyer or crucial??

the price looks right for e-buyer but haven't heard much about them??

and since i have two slots should i get 256 stick and a 128 to make 512??? sorry this is new to me!! thanks in advance:cool:

Get Cruicial RAM. There may not be anything wrong with e-buyer but a) You may get low quality ram and b) They may not be trustworthy. Go for cruicial, kingston, or cicero RAM... Its only 10 bux more usually (if even that...)

Link to comment
https://www.neowin.net/forum/topic/1311-adding-ram/#findComment-6818
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Firefox, for privacy, wide range of plugins without having to suffer the latest Google manifest restrictions and when used on Android for the mobile browser plugins like an ad-blocker, sadly that option isn't available to me now I've swapped to iOS as outside of the EU Firefox mobile is just a reskin of Safari
    • Ok will give that a shot soon as wake up in morning.     Hopefully does restore it working right  
    • Try doing a reset/repair on the Windows store: To reset the Microsoft Store on Windows 11, press the Windows key + I to open Settings, go to Apps & features, find Microsoft Store, click on it, select Advanced options, and then click the Reset button. This will clear the cache and restore the app to its default state, which can help resolve issues.
    • Microsoft's new Exchange Message Trace: What admins need to know before September by Paul Hill Microsoft has just announced the general availability of the new Message Trace in the Exchange admin center (EAC) in Exchange Online for its worldwide (WW) customers. The Redmond giant said that it’ll begin rolling it out in mid-June and complete the rollout in July. Message Trace in the Exchange Admin Center for Exchange Online is a tool that lets admins trace which path emails took as they traveled through the Microsoft 365 organization. It lets admins see if emails were received, rejected, or deferred. It is helpful for troubleshooting mail flow issues and validating policy changes. To get started with the new Message Trace, admins can access it by going to the Exchange admin center > Mail flow > Message Trace. While the Windows-maker has received positive feedback during the Public Preview, you can still provide your thoughts through Exchange admin center > Give Feedback. In addition, Microsoft will continue to maintain the old Message Trace user experience in Exchange admin center and cmdlets for several months to ease the transition, however, they will be deprecated for WW customers starting from September 1. The Reporting Webservice support for Message Trace data will also begin deprecating on this date. A side note to mention here is that this timeline only applies to the WW environment and doesn’t affect GCC, GCC-High, DOD, or other sovereign clouds. More information about the switch over for those will be provided in the second half of the year. Who it affects, and how These changes need to be noted by Exchange Online administrators and IT professionals as those are the people who will be directly affected. Specifically, it will affect anyone managing mail flow and troubleshooting email delivery in Exchange Online. Those who are affected will have to get switched over to the new Message Trace before Microsoft starts deprecating features in several months time. Admins will want to act promptly to avoid any unforeseen issues that could arise. Another detail that admins should be aware of is that scripts that rely on the older “Get-MessageTrace” or “Get-MessageTraceDetail” cmdlets will break on September 1. To address this, admins will need to update their scripts to use the new “Get-MessageTraceV2” and the “Get-MessageTraceDetailV2” cmdlets. Finally, any admins out there using the Reporting Webservice for Message Trace data will also need to make a change. They will need to shift to the new Message Trace PowerShell cmdlets. Why it’s happening Microsoft has been working on a new Message Trace experience, incorporating feedback from the Public Preview phase, to improve its design and performance. The switch gives Microsoft the opportunity to standardize and modernize admin interfaces and the underlying technologies. What to watch for While September 1 may seem like a long way away, fixing any issues, such as scripts due to deprecations, could take some time. Any admins managing the affected items need to ensure they deal with affected components in a timely manner. In terms of documentation, Microsoft has so far only released the Public Preview document which highlights the changes between the old and new versions. Microsoft says that it will publish cmdlet documentation for the new Message Trace cmdlets by the time of the general availability, so admins should look out for that.
    • Microsoft PC Manager 3.17.2.0 (Offline Installer) by Razvan Serea With Microsoft PC Manager, users can easily perform basic computer maintenance and enhance the speed of their devices with just one click. This app offers a range of features, including disk cleanup, startup app management, virus scanning, Windows Update checks, process monitoring, and storage management. Microsoft PC Manager key features: Storage Manager- easily uninstall infrequently used apps, manage large files, perform a cleanup, and set up Storage Sense to automatically clear temporary files. Health Checkup feature -scans for potential problems, viruses, and startup programs to turn off. It helps you identify unnecessary items to remove, optimizing your system's performance. Pop-up Management - block pop-up windows from appearing in apps. Windows Update - scans your system for any pending updates. Startup Apps - enable or disable startup apps on your PC, allowing you to optimize your system's startup performance. Browser Protection - rest assured that harmful programs cannot alter your default browser. Also enables you to change your default browser. Process Management - allows you to conveniently terminate any active process, ensuring optimal system performance and resource utilization. Anti-virus protection - Fully integrated with Windows Security. Safeguard your PC anytime. Quick Steps: Download Microsoft PC Manager Offline Installer (APPX/MSIX) with Adguard Adguard serves as a third-party online service, offering a user-friendly method for directly downloading appx, appxbundle, and msixbundle files from the Microsoft Store. Official download links will be generated for both the app's various versions and its dependency packages. How to download Microsoft PC Manager Offline Installer (APPX/MSIX) 1. Initially, you must find the app URL within the Microsoft Store. Access the Microsoft Store via your browser and search for "Microsoft PC Manager". Once located, copy the app URL, which includes the product ID, either from the address bar or from the provided link below. https://apps.microsoft.com/detail/9PM860492SZD 2. Now paste the app URL into the designated area, then click the check mark button to produce a direct download link. 3. To download, right-click the relevant link and select “Save link as…” from your browser's menu. Occasionally, Microsoft Edge may flag the download as insecure. In such cases, consider utilizing alternative browsers such as Google Chrome or Firefox to successfully complete the download. Microsoft PC Manager is a completely free tool optimized exclusively for use on Windows 10 (version 1809 or newer) and Windows 11. Download: Microsoft PC Manager 3.17.2.0 | from Microsoft Store View: Microsoft PC Manager Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Leonard grant earned a badge
      Week One Done
    • One Month Later
      portacnb1 earned a badge
      One Month Later
    • Week One Done
      portacnb1 earned a badge
      Week One Done
    • First Post
      m10d earned a badge
      First Post
    • Conversation Starter
      DarkShrunken earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      261
    2. 2
      snowy owl
      158
    3. 3
      +FloatingFatMan
      145
    4. 4
      ATLien_0
      140
    5. 5
      Xenon
      131
  • Tell a friend

    Love Neowin? Tell a friend!