Trying to block a site using hosts file in windows 10, but it's not blocking


Recommended Posts

I am attempting to block a website using the hosts file in win10. I am using the format 127.0.0.1 site.name (does it mater if it's just domain.com does it need the http in front?), saving it (using notepad w/ admin privileges) and then double checking the file. I have even reset the system and it still seems to just ignore the fact that the site in question is blocked. Am I doing something incorrect, or is there something else that needs to be done?

  • Like 1
  On 16/01/2017 at 21:57, jnelsoninjax said:

I am attempting to block a website using the hosts file in win10. I am using the format 127.0.0.1 site.name, saving it (using notepad w/ admin privileges) and then double checking the file. I have even reset the system and it still seems to just ignore the fact that the site in question is blocked. Am I doing something incorrect, or is there something else that needs to be done?

Expand  

What browser are you testing this with?

Instead of 127.0.0.1, try 0.0.0.0. I currently use https://github.com/StevenBlack/hosts to filter traffic, an thats what they use. Hope it helps

  On 16/01/2017 at 22:03, kurupy said:

Instead of 127.0.0.1, try 0.0.0.0. I currently use https://github.com/StevenBlack/hosts to filter traffic, an thats what they use. Hope it helps

Expand  

I tried the 0.0.0.0 as well, I noticed that address was in the hosts file already from another program, and I tried replicating that as well, at this point IDK if the issue is that the site is cached and FF is loading the cached version or if there's something else going on.

  • Like 1
  On 16/01/2017 at 22:06, jnelsoninjax said:

I tried the 0.0.0.0 as well, I noticed that address was in the hosts file already from another program, and I tried replicating that as well, at this point IDK if the issue is that the site is cached and FF is loading the cached version or if there's something else going on.

Expand  

Try clearing the cache and attempt to visit the website again.

  On 16/01/2017 at 22:08, Circaflex said:

Try clearing the cache and attempt to visit the website again.

Expand  

No effect. Site still loads just fine. Also just a FYI the FF has no extensions installed, so there is no conflict there.

  • Like 1
  On 16/01/2017 at 22:08, sc302 said:

If I wanted to block google with a host file this is what I would do


127.0.0.1 google.com


Sent from my iPhone using Tapatalk

Expand  

That is exactly how I have it setup: 127.0.0.1 website.com I also have it as 0.0.0.0 website.com

  • Like 1
  On 16/01/2017 at 22:17, exotoxic said:

Did you try cleaning the DNS cache?

cmd --> ipconfig /flushdns

Expand  

Had not thought about that, I give it a go.

  • Like 1
  On 16/01/2017 at 22:18, jnelsoninjax said:

Had not thought about that, I give it a go.

Expand  

Again, nothing.

Tried in Edge, still goes through

  • Like 1

Why not use opendns or some other block to block the sites you don't want them or yourself to visit. There are far better solutions than to use a host file.


Sent from my iPhone using Tapatalk

  On 16/01/2017 at 22:25, Circaflex said:

Random thought, but have you tried rebooting after making the edits and attempting to visit the webpage?

Expand  

Not every time, but after initial change I rebooted the machine.

So far I have 1) Cleared the Cache 2)Flushed the DNS 3) Removed all cookies.

@sc302, I am going to do that now! I realized just as you said it that I have the router configured to use OpenDNS and Google's DNS as well, I check which one is the primary (hopefully OpenDNS)

  • Like 1
  On 16/01/2017 at 23:10, sc302 said:

If you create an account with opendns, you will be able to add your site/house/home internet and block access by category or by site name.  It is free to setup.

Expand  

Well it turns out that there is no way to set the router (Linksys WRT1900AC) to use OpenDNS, it will always default to the ISP's DNS server, which is asinine, but after some extensive research I have determined that to be the case for this router, at least until I install and open source firmware on it.

  • Like 1
  On 17/01/2017 at 00:29, jnelsoninjax said:

Well it turns out that there is no way to set the router (Linksys WRT1900AC) to use OpenDNS, it will always default to the ISP's DNS server, which is asinine, but after some extensive research I have determined that to be the case for this router, at least until I install and open source firmware on it.

Expand  

I assume you are using a static IP if that is the case? If it is dynamic, yu can use a different DNS. You do that by providing the OpenDNS IPs in the DHCP Server settings on the Local Network tab of the Connectivity page.

 

 

they also have a config page here for that router https://support.opendns.com/hc/en-us/articles/228008007-Configuration-for-Linksys-Cisco-AC175-EA6300-EA6500-EA6900-WRT1900AC

  On 17/01/2017 at 00:29, jnelsoninjax said:

Well it turns out that there is no way to set the router (Linksys WRT1900AC) to use OpenDNS, it will always default to the ISP's DNS server, which is asinine, but after some extensive research I have determined that to be the case for this router, at least until I install and open source firmware on it.

Expand  

you are looking in the wrong place.  change the dns to point to opendns in the below screenshot.

 

some give you the opportunity to change it in the internet setting tab (or whatever the equivalent terminology is in the different hardware manufacturers gui), others you change it in the local area connection, LAN or DHCP location). 

 

 

1.jpg

  On 17/01/2017 at 01:14, Circaflex said:

I assume you are using a static IP if that is the case? If it is dynamic, yu can use a different DNS. You do that by providing the OpenDNS IPs in the DHCP Server settings on the Local Network tab of the Connectivity page.

 

 

they also have a config page here for that router https://support.opendns.com/hc/en-us/articles/228008007-Configuration-for-Linksys-Cisco-AC175-EA6300-EA6500-EA6900-WRT1900AC

Expand  

Thanks for that info!

  On 17/01/2017 at 02:23, sc302 said:

you are looking in the wrong place.  change the dns to point to opendns in the below screenshot.

 

some give you the opportunity to change it in the internet setting tab (or whatever the equivalent terminology is in the different hardware manufacturers gui), others you change it in the local area connection, LAN or DHCP location). 

 

 

1.jpg

Expand  

You're correct, I was reading/looking in the wrong spot on the config page!

  • Like 1

Success! I finally got it to block the site in question via OpenDNS! Talk about a giant PITA, but I finally got it.

  • Like 3

Did you bother to do a simple test if host file entry was being used?

 

Edit host file as admin, put in your entries and then try and ping..  If this something else has been looked up recently then you would need to flush the cache..

 

This really is clickity clickity stuff.. So couple things - your browser had it cached, using a proxy so it doesn't even ask local system or dns - the proxy gets asked, etc. Your running some antivirus that prevents changes to hosts file sort of thing.. But its like 2 seconds to validate if what your putting in the host file is being used..

hostfile.png

 

blocksite.png

 

You have to make sure what your putting in the host file is what is actually being looked up too..  ie if your not going to say www.google.com then google.com would work, etc.

 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Get this massive 4TB WD_BLACK SN7100 SSD at a new all-time low price by Taras Buria Xbox owners recently received a new storage upgrade option, which allows them to equip the Xbox Series X|S with 4TB of extra space. That card, however, has an eye-watering price tag—nearly as much as the 1TB Xbox Series S. On the PC side, though, things are much better. Right now, if you need a 4TB SSD without selling a kidney, you can get the WD_BLACK SN7100 PCIe Gen4 SSD. It is now available on Amazon at a new all-time low price after a 16% discount (nearly half the cost of the new 4TB Xbox Storage Expansion Card). The SN7100 is a fast, reliable, and, more importantly, affordable Gen4 solid-state drive. Its speeds are rated up to 7,000MB/s sequential read and 6,700MB/s sequential write, while random input-output speeds are rated at 900K IOPS read and 1,350K IOPS write. These specs are not record-breaking, but they are fast enough for modern gaming (DirectStorage is supported), fast loading times in games and apps, and quick file transfer. The WD_BLACK SN7100 has a limited five-year warranty and endurance rating up to 2,400 TBW. You can monitor the health of your drive in the WD_Black Dashboard app on Windows. As for compatibility, you can use the SN7100 in any PC that accommodates M.2 2280 PCIe Gen4 drives, including PlayStation 5. It is compatible with PCIe Gen3 systems, but the maximum speeds will be limited. 4TB WD_BLACK SN7100 PCIe Gen4 Solid-State Drive - $249.99 | 16% off on Amazon US This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • Snagit 2025.2.0 by Razvan Serea Snagit is the most complete screen capture utility available. Showing someone exactly what you see on your screen is sometimes the quickest and clearest way to communicate. With Snagit, you can select anything on your screen – an area, image, article, Web page, or error message – and capture it. Then, save the screen capture to a file, send it to Snagit​'s editor to add professional effects, share it by e-mail, or drop it into PowerPoint®, Word®, or another favorite application. Capture and share images, text or video from your PC. Create beautiful presentations, flawless documentation and quickly save online content. The latest version of Snagit offers a totally new interface and workflow - making SnagIt easier for beginners to use, while still providing maximum convenience and flexibility for the screen capture experts. Snagit 2025.2.0 changelog: Edit Images from Camtasia Snagit can now be used to seamlessly edit images from Camtasia. Requires Camtasia version 2025.2.0 or later. In the Camtasia Media Bin, right-click an image and select the Edit in Snagit option. In Snagit, make your edits. When finished, click Send in the "Send changes to Camtasia" notification to replace the image on your Camtasia timeline. Step Capture Improved the Step Capture template to accommodate longer auto-populated step text. Annotations such as Callout or Arrow tool objects now anchor to and move with sections as sections are added to, reordered, or deleted from templates. Subscription Software Updated the Account dropdown to open automatically when new subscription related messages are present. Performance Improvements Improved the startup time for Snagit Capture application. Updates for IT Administrators Updated BouncyCastle.Cryptography package to address CVE-2024-29857 and CVE-2024-30172. Removed dependency on Xceed Zip. Updated LeadTools DLLs. Fixed an issue where Snagit might not recognize offline subscription activation. Fixed an issue where the video recording toolbar could be hidden from users when using Snagit in virtual environments or with remote desktop applications. Bug Fixes Fixed an issue where using Step Capture with the Share destination set to File in the Capture Window could result in data loss. Fixed a crash that could occur when capturing on some HDR monitors. Fixed an issue where the cursor object in a capture might include some of the background image in certain situations. Fixed an issue with the Box share destination to use the default browser for authentication. Fixed an issue where the Blur tool Color property could show when the blur or pixelate Type was selected. Fixed an issue where the privacy policy link in Snagit's installer might not open in the expected language. (PONRPD) Download: Snagit 64-bit | 419.0 MB (Shareware) Links: SnagIt Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Markdown's creator weighs in on rumored Apple Notes export feature by David Uzondu The rumor mill is churning as we draw closer to WWDC2025, and one of the interesting developments being discussed is a report from 9To5Mac that claimed Apple Notes in iOS 19 iOS 26, will finally get Markdown export capabilities. This caught the attention of many, including the person who actually invented Markdown. John Gruber, the creator of Markdown, shared his thoughts on this potential new feature on his weblog. For those who don't know, Markdown, which Gruber developed back in 2004 with significant input from Aaron Swartz (RIP!), is a lightweight markup language designed for creating formatted text using a plain text editor. Its main advantage is that it is easy to read and easy to write. When the news first broke, some interpretations suggested Apple Notes would gain full Markdown support, transforming it into an application where users could directly type and see Markdown syntax, much like how specialized editors like Obsidian operate. These tools are intended for users to work directly within the Markdown framework for all their note-taking. Gruber himself indicated that he does not believe Apple Notes should become a full-fledged "Markdown editor," even as an option. He stated that such a change would be a "huge mistake." His reasoning is rooted in his original vision for Markdown and his view of Apple Notes' purpose. He reiterated that he initially designed Markdown as a "text-to-HTML conversion tool for web writers" and for contexts requiring plain text file storage. He feels Apple Notes serves a different, valuable role with its current WYSIWYG (What You See Is What You Get) rich text editing. This interface, he argues, is excellent for quickly capturing thoughts, particularly on an iPhone, and aligns with the Macintosh philosophy of user-friendliness. He pointed out that creating a syntactically incorrect markdown is trivial, whereas a malformed note should not be possible with Apple Notes. Despite his reservations about a complete Markdown overhaul for the editing experience, Gruber finds the prospect of exporting notes in Markdown format very appealing. He wrote that this specific capability "sounds awesome." He pointed out, quite rightly, that Apple Notes' current export functions are rather limited, primarily offering PDF and Pages document formats. Adding Markdown export would provide a much more flexible way for users, especially those in the "niche" he identifies with, to move their content out of Notes and into other applications. Gruber did express curiosity about how Apple might handle images embedded in notes during a Markdown export, as image handling can be a tricky aspect of Markdown.
    • What? Every single app I've installed from the Microsoft Store comes from its intended developer and works perfectly fine. What apps do you install?
    • Microsoft Store is such a weird place filled with so much absolute garbage and with reputable apps that somehow come from questionable sources. Like, the app name is known, the images back it up but the publisher is just some weird name that's not mentioned for the apps we know.
  • Recent Achievements

    • Week One Done
      CHUNWEI earned a badge
      Week One Done
    • One Year In
      survivor303 earned a badge
      One Year In
    • Week One Done
      jbatch earned a badge
      Week One Done
    • First Post
      Yianis earned a badge
      First Post
    • Rookie
      GTRoberts went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      419
    2. 2
      +FloatingFatMan
      182
    3. 3
      snowy owl
      181
    4. 4
      ATLien_0
      176
    5. 5
      Xenon
      139
  • Tell a friend

    Love Neowin? Tell a friend!